[PATCH v2 00/32] Samsung S2MPG10 PMIC MFD-based drivers

[PATCH v2 00/32] Samsung S2MPG10 PMIC MFD-based drivers

[André Draszik]

This series adds initial support for the Samsung S2MPG10 PMIC using the
MFD framework. This is a PMIC for mobile applications and is used on
the Google Pixel 6 and 6 Pro (oriole / raven).

*** dependency note ***

To compile, this depends on the Samsung ACPM driver in Linux next with
the following additional patches:
https://lore.kernel.org/all/20250321-acpm-atomic-v1-0-fb887bde7e61@linaro.org/
https://lore.kernel.org/all/20250319-acpm-fixes-v2-0-ac2c1bcf322b@linaro.org/
https://lore.kernel.org/all/20250327-acpm-children-v1-0-0afe15ee2ff7@linaro.org/

*** dependency note end ***

+++ Kconfig update +++

There is a Kconfig symbol update in this series, because the existing
Samsung S2M driver has been split into core and transport (I2C & ACPM)
parts. CONFIG_MFD_SEC_CORE is now truly a core driver, and
the I2C code that was part of it is now enabled via CONFIG_MFD_SEC_I2C.

This was necessary because unlike the other S2M PMICs, S2MPG10 doesn't
talk via I2C, but via the Samsung ACPM firmware.

+++ Kconfig update end +++

This series must be applied in-order, due to interdependencies of some
of the patches. There are also various cleanup patches to the S2M
drivers. I've kept them ordered as:
  * DT bindings (patches 1 ... 3)
  * s2m mfd prep for adding S2MPG10 support (patches 4 ... 7)
  * split S2M mfd driver into s2m-core and s2m-i2c, including the
    kconfig symbol update (patch 8)
  * S2MPG10 core driver (patch 9)
  * s2m mfd driver cleanup patches (patches 10 ... 23)
  * S2MPG10 clock driver (patch 24)
  * s2m RTC prep for adding S2MPG10 (patch 25 ... 26)
  * S2MPG10 RTC driver (patch 27)
  * s2m RTC cleanup patches (patches 28 ... 31)

I realise these are many, but since some prep-work was required to be
able to add S2MPG anyway, I wanted to get the cleanup patches in as
well :-) Let me know if I should postpone them to a later date instead.

The S2MPG10 includes buck converters, various LDOs, power meters, RTC,
clock outputs, and additional GPIOs interfaces.

This series adds support in the top-level device driver, and for the
RTC and clock. Importantly, having the RTC driver allows to do a proper
reset of the system. Drivers or driver updates for the other components
will be added in future patches.

This will need a DT update for Oriole / Raven to enable this device. I
will send that out separately.

Cheers,
Andre'

Signed-off-by: André Draszik <andre.draszik@linaro.org>
---
Changes in v2:
- Rob:
  - make PMIC node a child of ACPM, and all related changes (binding,
    driver)
- Krzysztof:
  - merge defconfig updates into patch changing the symbols (patch 8)
  - split MODULE_AUTHOR update into a separate patch
  - better alignment fix (patch 11)
  - merge two s2dos05/s2mpu05 related patches into one (patch 14)
- myself:
  - keep PMIC DT parsing in core, not in transport driver
  - several updates in sec-acpm.c, see separate entries in patch 9
  - fix typo in patch 17
  - collect tags
- Link to v1: https://lore.kernel.org/r/20250323-s2mpg10-v1-0-d08943702707@linaro.org

---
André Draszik (32):
      dt-bindings: mfd: samsung,s2mps11: add s2mpg10
      dt-bindings: clock: samsung,s2mps11: add s2mpg10
      dt-bindings: firmware: google,gs101-acpm-ipc: add PMIC child node
      mfd: sec: drop non-existing forward declarations
      mfd: sec: sort includes alphabetically
      mfd: sec: update includes to add missing and remove superfluous ones
      mfd: sec: move private internal API to internal header
      mfd: sec: split into core and transport (i2c) drivers
      mfd: sec: add support for S2MPG10 PMIC
      mfd: sec: merge separate core and irq modules
      mfd: sec: fix open parenthesis alignment (multiple)
      mfd: sec: sort struct of_device_id entries and the device type switch
      mfd: sec: use dev_err_probe() where appropriate
      mfd: sec: s2dos05/s2mpu05: use explicit regmap config and drop default
      mfd: sec: s2dos05: doesn't support interrupts (it seems)
      mfd: sec: don't ignore errors from sec_irq_init()
      mfd: sec: rework platform data and regmap instantiating
      mfd: sec: change device_type to int
      mfd: sec: don't compare against NULL / 0 for errors, use !
      mfd: sec: use sizeof(*var), not sizeof(struct type_of_var)
      mfd: sec: convert to using MFD_CELL macros
      mfd: sec: convert to using REGMAP_IRQ_REG() macros
      mfd: sec: add myself as module author
      clk: s2mps11: add support for S2MPG10 PMIC clock
      rtc: s5m: cache value of platform_get_device_id() during probe
      rtc: s5m: prepare for external regmap
      rtc: s5m: add support for S2MPG10 RTC
      rtc: s5m: fix a typo: peding -> pending
      rtc: s5m: switch to devm_device_init_wakeup
      rtc: s5m: replace regmap_update_bits with regmap_clear/set_bits
      rtc: s5m: replace open-coded read/modify/write registers with regmap helpers
      MAINTAINERS: add myself as reviewer for Samsung S2M MFD

 .../devicetree/bindings/clock/samsung,s2mps11.yaml |   1 +
 .../bindings/firmware/google,gs101-acpm-ipc.yaml   |  17 +
 .../devicetree/bindings/mfd/samsung,s2mps11.yaml   |  28 +-
 MAINTAINERS                                        |   3 +-
 arch/arm/configs/exynos_defconfig                  |   2 +-
 arch/arm/configs/multi_v7_defconfig                |   2 +-
 arch/arm/configs/pxa_defconfig                     |   2 +-
 arch/arm64/configs/defconfig                       |   2 +-
 drivers/clk/clk-s2mps11.c                          |   8 +
 drivers/mfd/Kconfig                                |  35 +-
 drivers/mfd/Makefile                               |   5 +-
 drivers/mfd/sec-acpm.c                             | 460 ++++++++++++++++++++
 drivers/mfd/sec-common.c                           | 301 +++++++++++++
 drivers/mfd/sec-core.c                             | 481 ---------------------
 drivers/mfd/sec-core.h                             |  23 +
 drivers/mfd/sec-i2c.c                              | 239 ++++++++++
 drivers/mfd/sec-irq.c                              | 460 +++++++-------------
 drivers/rtc/rtc-s5m.c                              | 197 ++++++---
 include/linux/mfd/samsung/core.h                   |   7 +-
 include/linux/mfd/samsung/irq.h                    | 103 +++++
 include/linux/mfd/samsung/rtc.h                    |  37 ++
 include/linux/mfd/samsung/s2mpg10.h                | 454 +++++++++++++++++++
 22 files changed, 2002 insertions(+), 865 deletions(-)
---
base-commit: f58dd835f82a5dda6c9d3895ee6f15016431fb1f
change-id: 20250321-s2mpg10-ef5d1ebd3043

Best regards,
-- 
André Draszik <andre.draszik@linaro.org>

[PATCH v2 01/32] dt-bindings: mfd: samsung,s2mps11: add s2mpg10

[André Draszik]

The Samsung S2MPG10 PMIC is similar to the existing PMICs supported by
this binding.

It is a Power Management IC for mobile applications with buck
converters, various LDOs, power meters, RTC, clock outputs, and
additional GPIOs interfaces.

Unlike other Samsung PMICs, communication is not via I2C, but via the
Samsung ACPM firmware, it therefore doesn't need a 'reg' property but
needs to be a child of the ACPM firmware node instead.

S2MPG10 can also act as a system power controller allowing
implementation of a true cold-reset of the system.

Support for the other components like regulators and power meters will
be added in subsequent future patches.

Signed-off-by: André Draszik <andre.draszik@linaro.org>

---
v2:
* drop ACPM phandle 'exynos,acpm-ipc', and expect this to be a child
  node of ACPM directly instead
* allow, but still don't enforce, regulators subnode, to ease adding it
  in the future
* deny 'reg' property, it's incorrect to optionally have it for S2MPG10
* enforce 'interrupts' or 'interrupts-extended' property. S2MPG10 can
  not work without. Note this is done as-is using the oneOf, because
  dtschema's fixups.py doesn't handle this nesting itself
---
 .../devicetree/bindings/mfd/samsung,s2mps11.yaml   | 28 ++++++++++++++++++++--
 1 file changed, 26 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml b/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml
index ac5d0c149796b6a4034b5d4245bfa8be0433cfab..62d0e9f8a4d39add50a986af1836cfdcf065ad48 100644
--- a/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml
+++ b/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml
@@ -20,6 +20,7 @@ description: |
 properties:
   compatible:
     enum:
+      - samsung,s2mpg10-pmic
       - samsung,s2mps11-pmic
       - samsung,s2mps13-pmic
       - samsung,s2mps14-pmic
@@ -58,16 +59,39 @@ properties:
       reset (setting buck voltages to default values).
     type: boolean
 
+  system-power-controller: true
+
   wakeup-source: true
 
 required:
   - compatible
-  - reg
-  - regulators
 
 additionalProperties: false
 
 allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,s2mpg10-pmic
+    then:
+      properties:
+        reg: false
+        samsung,s2mps11-acokb-ground: false
+        samsung,s2mps11-wrstbi-ground: false
+
+      oneOf:
+        - required: [interrupts]
+        - required: [interrupts-extended]
+
+    else:
+      properties:
+        system-power-controller: false
+
+      required:
+        - reg
+        - regulators
+
   - if:
       properties:
         compatible:

-- 
2.49.0.472.ge94155a9ec-goog

[PATCH v2 02/32] dt-bindings: clock: samsung,s2mps11: add s2mpg10

[André Draszik]

The Samsung S2MPG10 clock controller is similar to the existing clock
controllers supported by this binding. Register offsets / layout are
slightly different, so it needs its own compatible.

Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
---
 Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml b/Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml
index d5296e6053a1881650b8e8ff2524ea01689b7395..91d455155a606a60ed2006e57709466ae8d72664 100644
--- a/Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml
+++ b/Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml
@@ -25,6 +25,7 @@ description: |
 properties:
   compatible:
     enum:
+      - samsung,s2mpg10-clk
       - samsung,s2mps11-clk
       - samsung,s2mps13-clk # S2MPS13 and S2MPS15
       - samsung,s2mps14-clk

-- 
2.49.0.472.ge94155a9ec-goog

[PATCH v2 03/32] dt-bindings: firmware: google,gs101-acpm-ipc: add PMIC child node

[André Draszik]

The PMIC is supposed to be a child of ACPM, add it here to describe the
connection.

Signed-off-by: André Draszik <andre.draszik@linaro.org>
---
 .../bindings/firmware/google,gs101-acpm-ipc.yaml        | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/Documentation/devicetree/bindings/firmware/google,gs101-acpm-ipc.yaml b/Documentation/devicetree/bindings/firmware/google,gs101-acpm-ipc.yaml
index 2cdad1bbae73bb1795eccf47e1a58e270acd022c..5524f2af5bda2d29b5113f8fe14ece7f02366a60 100644
--- a/Documentation/devicetree/bindings/firmware/google,gs101-acpm-ipc.yaml
+++ b/Documentation/devicetree/bindings/firmware/google,gs101-acpm-ipc.yaml
@@ -27,6 +27,16 @@ properties:
   mboxes:
     maxItems: 1
 
+  pmic:
+    description: Child node describing the main PMIC.
+    type: object
+    $ref: /schemas/mfd/samsung,s2mps11.yaml
+    unevaluatedProperties: false
+
+    properties:
+      compatible:
+        const: samsung,s2mpg10-pmic
+
   shmem:
     description:
       List of phandle pointing to the shared memory (SHM) area. The memory
@@ -43,8 +53,15 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
     power-management {
         compatible = "google,gs101-acpm-ipc";
         mboxes = <&ap2apm_mailbox>;
         shmem = <&apm_sram>;
+
+        pmic {
+            compatible = "samsung,s2mpg10-pmic";
+            interrupts-extended = <&gpa0 6 IRQ_TYPE_LEVEL_LOW>;
+        };
     };

-- 
2.49.0.472.ge94155a9ec-goog

[PATCH v2 04/32] mfd: sec: drop non-existing forward declarations

[André Draszik]

sec_irq_resume() was removed in commit 6445b84abf91 ("mfd: Add s2mps11
irq driver") and sec_irq_exit() in commit 3dc6f4aaafbe ("mfd: sec: Use
devm_mfd_add_devices and devm_regmap_add_irq_chip") while the
prototypes were left. They should be removed.

Do so.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
---
 include/linux/mfd/samsung/core.h | 2 --
 1 file changed, 2 deletions(-)

diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h
index f35314458fd22e43fa13034439406bea17a155c9..b7008b50392ab857751b89e0a05d2c27f6306906 100644
--- a/include/linux/mfd/samsung/core.h
+++ b/include/linux/mfd/samsung/core.h
@@ -72,8 +72,6 @@ struct sec_pmic_dev {
 };
 
 int sec_irq_init(struct sec_pmic_dev *sec_pmic);
-void sec_irq_exit(struct sec_pmic_dev *sec_pmic);
-int sec_irq_resume(struct sec_pmic_dev *sec_pmic);
 
 struct sec_platform_data {
 	struct sec_regulator_data	*regulators;

-- 
2.49.0.472.ge94155a9ec-goog

[PATCH v2 05/32] mfd: sec: sort includes alphabetically

[André Draszik]

Sorting headers alphabetically helps locating duplicates, and makes it
easier to figure out where to insert new headers.

Signed-off-by: André Draszik <andre.draszik@linaro.org>
---
 drivers/mfd/sec-core.c | 14 +++++++-------
 drivers/mfd/sec-irq.c  |  5 ++---
 2 files changed, 9 insertions(+), 10 deletions(-)

diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c
index 3e9b65c988a7f08bf16d3703004a3d60cfcb1c75..e31b3a6fbc8922e04a8bfcb78c85b6dbaf395e37 100644
--- a/drivers/mfd/sec-core.c
+++ b/drivers/mfd/sec-core.c
@@ -3,16 +3,10 @@
 // Copyright (c) 2012 Samsung Electronics Co., Ltd
 //              http://www.samsung.com
 
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/init.h>
 #include <linux/err.h>
-#include <linux/slab.h>
 #include <linux/i2c.h>
-#include <linux/of.h>
+#include <linux/init.h>
 #include <linux/interrupt.h>
-#include <linux/pm_runtime.h>
-#include <linux/mutex.h>
 #include <linux/mfd/core.h>
 #include <linux/mfd/samsung/core.h>
 #include <linux/mfd/samsung/irq.h>
@@ -23,7 +17,13 @@
 #include <linux/mfd/samsung/s2mps15.h>
 #include <linux/mfd/samsung/s2mpu02.h>
 #include <linux/mfd/samsung/s5m8767.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/pm_runtime.h>
 #include <linux/regmap.h>
+#include <linux/slab.h>
 
 static const struct mfd_cell s5m8767_devs[] = {
 	{ .name = "s5m8767-pmic", },
diff --git a/drivers/mfd/sec-irq.c b/drivers/mfd/sec-irq.c
index 047fc065fcf17f5bde84143d77a46749111ea5b8..5c0d949aa1a20f5538d8baf7a8aefc1160ffa14c 100644
--- a/drivers/mfd/sec-irq.c
+++ b/drivers/mfd/sec-irq.c
@@ -6,9 +6,6 @@
 #include <linux/device.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
-#include <linux/module.h>
-#include <linux/regmap.h>
-
 #include <linux/mfd/samsung/core.h>
 #include <linux/mfd/samsung/irq.h>
 #include <linux/mfd/samsung/s2mps11.h>
@@ -16,6 +13,8 @@
 #include <linux/mfd/samsung/s2mpu02.h>
 #include <linux/mfd/samsung/s2mpu05.h>
 #include <linux/mfd/samsung/s5m8767.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
 
 static const struct regmap_irq s2mps11_irqs[] = {
 	[S2MPS11_IRQ_PWRONF] = {

-- 
2.49.0.472.ge94155a9ec-goog

[PATCH v2 06/32] mfd: sec: update includes to add missing and remove superfluous ones

[André Draszik]

This driver misses to include some of the respective headers of some of
the APIs used. It also includes headers that aren't needed (e.g. due to
previous driver rework where includes weren't updated).

It is good practice to directly include all headers used, which avoids
implicit dependencies and spurious build breakage if someone rearranged
headers, as this could cause the implicit includes to be dropped.

Include the relevant headers explicitly and drop superfluous ones.

Signed-off-by: André Draszik <andre.draszik@linaro.org>
---
 drivers/mfd/sec-core.c | 7 +++----
 drivers/mfd/sec-irq.c  | 5 ++++-
 2 files changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c
index e31b3a6fbc8922e04a8bfcb78c85b6dbaf395e37..b12020c416aa8bf552f3d3b7829f6a38a773f674 100644
--- a/drivers/mfd/sec-core.c
+++ b/drivers/mfd/sec-core.c
@@ -3,9 +3,9 @@
 // Copyright (c) 2012 Samsung Electronics Co., Ltd
 //              http://www.samsung.com
 
+#include <linux/device.h>
 #include <linux/err.h>
 #include <linux/i2c.h>
-#include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/mfd/core.h>
 #include <linux/mfd/samsung/core.h>
@@ -17,13 +17,12 @@
 #include <linux/mfd/samsung/s2mps15.h>
 #include <linux/mfd/samsung/s2mpu02.h>
 #include <linux/mfd/samsung/s5m8767.h>
+#include <linux/mod_devicetable.h>
 #include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/mutex.h>
 #include <linux/of.h>
+#include <linux/pm.h>
 #include <linux/pm_runtime.h>
 #include <linux/regmap.h>
-#include <linux/slab.h>
 
 static const struct mfd_cell s5m8767_devs[] = {
 	{ .name = "s5m8767-pmic", },
diff --git a/drivers/mfd/sec-irq.c b/drivers/mfd/sec-irq.c
index 5c0d949aa1a20f5538d8baf7a8aefc1160ffa14c..3ed2902c3a2634a6ea656d890ecea934053bd192 100644
--- a/drivers/mfd/sec-irq.c
+++ b/drivers/mfd/sec-irq.c
@@ -3,7 +3,10 @@
 // Copyright (c) 2011-2014 Samsung Electronics Co., Ltd
 //              http://www.samsung.com
 
-#include <linux/device.h>
+#include <linux/array_size.h>
+#include <linux/build_bug.h>
+#include <linux/dev_printk.h>
+#include <linux/export.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/mfd/samsung/core.h>

-- 
2.49.0.472.ge94155a9ec-goog

[PATCH v2 07/32] mfd: sec: move private internal API to internal header

[André Draszik]

sec_irq_init() is an internal API for the core driver, and doesn't
belong into the public header.

Due to an upcoming split of the driver into a core and i2c driver,
we'll also be adding more internal APIs, which again shouldn't be in
the public header.

Move it into a new internal include.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
---
 MAINTAINERS                      |  2 +-
 drivers/mfd/sec-core.c           |  1 +
 drivers/mfd/sec-core.h           | 15 +++++++++++++++
 drivers/mfd/sec-irq.c            |  1 +
 include/linux/mfd/samsung/core.h |  2 --
 5 files changed, 18 insertions(+), 3 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index 322ee00547f6e494a96d2495092f72148da22bd0..d4d577b54d798938b7a8ff0c2bdbd0b61f87650f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -21407,7 +21407,7 @@ F:	Documentation/devicetree/bindings/mfd/samsung,s5m*.yaml
 F:	Documentation/devicetree/bindings/regulator/samsung,s2m*.yaml
 F:	Documentation/devicetree/bindings/regulator/samsung,s5m*.yaml
 F:	drivers/clk/clk-s2mps11.c
-F:	drivers/mfd/sec*.c
+F:	drivers/mfd/sec*.[ch]
 F:	drivers/regulator/s2m*.c
 F:	drivers/regulator/s5m*.c
 F:	drivers/rtc/rtc-s5m.c
diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c
index b12020c416aa8bf552f3d3b7829f6a38a773f674..83693686567df61b5e09f7129dc6b01d69156ff3 100644
--- a/drivers/mfd/sec-core.c
+++ b/drivers/mfd/sec-core.c
@@ -23,6 +23,7 @@
 #include <linux/pm.h>
 #include <linux/pm_runtime.h>
 #include <linux/regmap.h>
+#include "sec-core.h"
 
 static const struct mfd_cell s5m8767_devs[] = {
 	{ .name = "s5m8767-pmic", },
diff --git a/drivers/mfd/sec-core.h b/drivers/mfd/sec-core.h
new file mode 100644
index 0000000000000000000000000000000000000000..b3fded5f02a0ddc09a9508fd49a5d335f7ad0ee7
--- /dev/null
+++ b/drivers/mfd/sec-core.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2012 Samsung Electronics Co., Ltd
+ *                http://www.samsung.com
+ * Copyright 2025 Linaro Ltd.
+ *
+ * Samsung SxM core driver internal data
+ */
+
+#ifndef __SEC_CORE_INT_H
+#define __SEC_CORE_INT_H
+
+int sec_irq_init(struct sec_pmic_dev *sec_pmic);
+
+#endif /* __SEC_CORE_INT_H */
diff --git a/drivers/mfd/sec-irq.c b/drivers/mfd/sec-irq.c
index 3ed2902c3a2634a6ea656d890ecea934053bd192..4d49bb42bd0d109263f485c8b58e88cdd8d598d9 100644
--- a/drivers/mfd/sec-irq.c
+++ b/drivers/mfd/sec-irq.c
@@ -18,6 +18,7 @@
 #include <linux/mfd/samsung/s5m8767.h>
 #include <linux/module.h>
 #include <linux/regmap.h>
+#include "sec-core.h"
 
 static const struct regmap_irq s2mps11_irqs[] = {
 	[S2MPS11_IRQ_PWRONF] = {
diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h
index b7008b50392ab857751b89e0a05d2c27f6306906..8a4e660854bbc955b812b4d61d4a52a0fc2f2899 100644
--- a/include/linux/mfd/samsung/core.h
+++ b/include/linux/mfd/samsung/core.h
@@ -71,8 +71,6 @@ struct sec_pmic_dev {
 	struct regmap_irq_chip_data *irq_data;
 };
 
-int sec_irq_init(struct sec_pmic_dev *sec_pmic);
-
 struct sec_platform_data {
 	struct sec_regulator_data	*regulators;
 	struct sec_opmode_data		*opmode;

-- 
2.49.0.472.ge94155a9ec-goog

[PATCH v2 08/32] mfd: sec: split into core and transport (i2c) drivers

[André Draszik]

As a preparation for adding support for Samsung's S2MPG10, which is
connected via SPEEDY / ACPM rather than I2C, split out (move) all
I2C-specific driver code into its own kernel module, sec-i2c, and
make the existing sec-core module be just the transport-agnostic core
driver kernel module.

At the same time, update all defconfigs that reference the old kconfig
symbol name.

While at it, also update file header comments and module description(s)
to drop references to 'mfd', and update comments to be C-style, not
C++.

Signed-off-by: André Draszik <andre.draszik@linaro.org>

--
Note: checkpatch complains about missing help for MFD_SEC_I2C here, but
that's a false-positive due to patch context.
It also suggests to update MAINTAINERS, but the new file is covered
already due to using a wildcard.

v2:
* split MODULE_AUTHOR update out of this patch (Krzysztof)
* keep DT parsing in core, not in transport driver
  (sec_pmic_i2c_parse_dt_pdata / sec_pmic_parse_dt_pdata)
* merge defconfig updates into this patch (Krzysztof)
---
 arch/arm/configs/exynos_defconfig   |   2 +-
 arch/arm/configs/multi_v7_defconfig |   2 +-
 arch/arm/configs/pxa_defconfig      |   2 +-
 arch/arm64/configs/defconfig        |   2 +-
 drivers/mfd/Kconfig                 |  18 ++-
 drivers/mfd/Makefile                |   1 +
 drivers/mfd/sec-core.c              | 247 +++++-------------------------------
 drivers/mfd/sec-core.h              |   9 ++
 drivers/mfd/sec-i2c.c               | 231 +++++++++++++++++++++++++++++++++
 9 files changed, 287 insertions(+), 227 deletions(-)

diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig
index 7ad48fdda1dac69a4a9612eabb573729bed7b3a6..251f45be6c14af59263373f21b27b15f42ec7f61 100644
--- a/arch/arm/configs/exynos_defconfig
+++ b/arch/arm/configs/exynos_defconfig
@@ -167,7 +167,7 @@ CONFIG_MFD_MAX77686=y
 CONFIG_MFD_MAX77693=y
 CONFIG_MFD_MAX8997=y
 CONFIG_MFD_MAX8998=y
-CONFIG_MFD_SEC_CORE=y
+CONFIG_MFD_SEC_I2C=y
 CONFIG_MFD_STMPE=y
 CONFIG_STMPE_I2C=y
 CONFIG_MFD_TPS65090=y
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index ad037c175fdb0ec8601c9b3607aca0c0e5f3c145..7d06ac5369b1a2f325462f2cf5b54fe22061ca77 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -612,7 +612,7 @@ CONFIG_MFD_QCOM_RPM=y
 CONFIG_MFD_SPMI_PMIC=y
 CONFIG_MFD_RK8XX_I2C=y
 CONFIG_MFD_RN5T618=y
-CONFIG_MFD_SEC_CORE=y
+CONFIG_MFD_SEC_I2C=y
 CONFIG_MFD_STMPE=y
 CONFIG_MFD_PALMAS=y
 CONFIG_MFD_TPS65090=y
diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig
index de0ac8f521d7612704ce327e9ac16ab9e999f3d3..064e79baf20da809c9ab1f1fa18282aaba11a41f 100644
--- a/arch/arm/configs/pxa_defconfig
+++ b/arch/arm/configs/pxa_defconfig
@@ -335,7 +335,7 @@ CONFIG_MFD_MAX77693=y
 CONFIG_MFD_MAX8907=m
 CONFIG_EZX_PCAP=y
 CONFIG_UCB1400_CORE=m
-CONFIG_MFD_SEC_CORE=y
+CONFIG_MFD_SEC_I2C=y
 CONFIG_MFD_PALMAS=y
 CONFIG_MFD_TPS65090=y
 CONFIG_MFD_TPS6586X=y
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 5bb8f09422a22116781169611482179b10798c14..f021fb29683be1a10720d7e6415daea771647879 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -769,7 +769,7 @@ CONFIG_MFD_MT6397=y
 CONFIG_MFD_SPMI_PMIC=y
 CONFIG_MFD_RK8XX_I2C=y
 CONFIG_MFD_RK8XX_SPI=y
-CONFIG_MFD_SEC_CORE=y
+CONFIG_MFD_SEC_I2C=y
 CONFIG_MFD_SL28CPLD=y
 CONFIG_RZ_MTU3=y
 CONFIG_MFD_TI_AM335X_TSCADC=m
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 22b93631003943c393d9fe704748bc23f1905397..62565dc89ec6d58611bbc1f31c65f757343b6453 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1292,21 +1292,25 @@ config MFD_RN5T618
 	  functionality of the device.
 
 config MFD_SEC_CORE
-	tristate "Samsung Electronics PMIC Series Support"
+	tristate
+	select MFD_CORE
+	select REGMAP_IRQ
+
+config MFD_SEC_I2C
+	tristate "Samsung Electronics S2MPA/S2MPS1X/S2MPU/S5M series PMICs"
 	depends on I2C=y
 	depends on OF
-	select MFD_CORE
+	select MFD_SEC_CORE
 	select REGMAP_I2C
-	select REGMAP_IRQ
 	help
-	  Support for the Samsung Electronics PMIC devices coming
-	  usually along with Samsung Exynos SoC chipset.
+	  Support for the Samsung Electronics PMIC devices with I2C interface
+	  coming usually along with Samsung Exynos SoC chipset.
 	  This driver provides common support for accessing the device,
 	  additional drivers must be enabled in order to use the functionality
-	  of the device
+	  of the device.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called sec-core.
+	  module will be called sec-i2c.
 	  Have in mind that important core drivers (like regulators) depend
 	  on this driver so building this as a module might require proper
 	  initial ramdisk or might not boot up as well in certain scenarios.
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 948cbdf42a18b22a826f0b17fb8d5796a7ec8ba6..ab6c4b17a391946d4c88f52ccbfee5424b4fb2d2 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -229,6 +229,7 @@ obj-$(CONFIG_MFD_RK8XX_I2C)	+= rk8xx-i2c.o
 obj-$(CONFIG_MFD_RK8XX_SPI)	+= rk8xx-spi.o
 obj-$(CONFIG_MFD_RN5T618)	+= rn5t618.o
 obj-$(CONFIG_MFD_SEC_CORE)	+= sec-core.o sec-irq.o
+obj-$(CONFIG_MFD_SEC_I2C)	+= sec-i2c.o
 obj-$(CONFIG_MFD_SYSCON)	+= syscon.o
 obj-$(CONFIG_MFD_LM3533)	+= lm3533-core.o lm3533-ctrlbank.o
 obj-$(CONFIG_MFD_VEXPRESS_SYSREG)	+= vexpress-sysreg.o
diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c
index 83693686567df61b5e09f7129dc6b01d69156ff3..bb664e052bf5198f2fc83a86bd6e1e72364fb8df 100644
--- a/drivers/mfd/sec-core.c
+++ b/drivers/mfd/sec-core.c
@@ -1,23 +1,21 @@
 // SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright (c) 2012 Samsung Electronics Co., Ltd
-//              http://www.samsung.com
+/*
+ * Copyright 2012 Samsung Electronics Co., Ltd
+ *                http://www.samsung.com
+ * Copyright 2025 Linaro Ltd.
+ *
+ * Samsung SxM core driver
+ */
 
 #include <linux/device.h>
 #include <linux/err.h>
-#include <linux/i2c.h>
+#include <linux/export.h>
 #include <linux/interrupt.h>
 #include <linux/mfd/core.h>
 #include <linux/mfd/samsung/core.h>
 #include <linux/mfd/samsung/irq.h>
-#include <linux/mfd/samsung/s2mpa01.h>
 #include <linux/mfd/samsung/s2mps11.h>
 #include <linux/mfd/samsung/s2mps13.h>
-#include <linux/mfd/samsung/s2mps14.h>
-#include <linux/mfd/samsung/s2mps15.h>
-#include <linux/mfd/samsung/s2mpu02.h>
-#include <linux/mfd/samsung/s5m8767.h>
-#include <linux/mod_devicetable.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/pm.h>
@@ -88,144 +86,6 @@ static const struct mfd_cell s2mpu05_devs[] = {
 	{ .name = "s2mps15-rtc", },
 };
 
-static const struct of_device_id sec_dt_match[] = {
-	{
-		.compatible = "samsung,s5m8767-pmic",
-		.data = (void *)S5M8767X,
-	}, {
-		.compatible = "samsung,s2dos05",
-		.data = (void *)S2DOS05,
-	}, {
-		.compatible = "samsung,s2mps11-pmic",
-		.data = (void *)S2MPS11X,
-	}, {
-		.compatible = "samsung,s2mps13-pmic",
-		.data = (void *)S2MPS13X,
-	}, {
-		.compatible = "samsung,s2mps14-pmic",
-		.data = (void *)S2MPS14X,
-	}, {
-		.compatible = "samsung,s2mps15-pmic",
-		.data = (void *)S2MPS15X,
-	}, {
-		.compatible = "samsung,s2mpa01-pmic",
-		.data = (void *)S2MPA01,
-	}, {
-		.compatible = "samsung,s2mpu02-pmic",
-		.data = (void *)S2MPU02,
-	}, {
-		.compatible = "samsung,s2mpu05-pmic",
-		.data = (void *)S2MPU05,
-	}, {
-		/* Sentinel */
-	},
-};
-MODULE_DEVICE_TABLE(of, sec_dt_match);
-
-static bool s2mpa01_volatile(struct device *dev, unsigned int reg)
-{
-	switch (reg) {
-	case S2MPA01_REG_INT1M:
-	case S2MPA01_REG_INT2M:
-	case S2MPA01_REG_INT3M:
-		return false;
-	default:
-		return true;
-	}
-}
-
-static bool s2mps11_volatile(struct device *dev, unsigned int reg)
-{
-	switch (reg) {
-	case S2MPS11_REG_INT1M:
-	case S2MPS11_REG_INT2M:
-	case S2MPS11_REG_INT3M:
-		return false;
-	default:
-		return true;
-	}
-}
-
-static bool s2mpu02_volatile(struct device *dev, unsigned int reg)
-{
-	switch (reg) {
-	case S2MPU02_REG_INT1M:
-	case S2MPU02_REG_INT2M:
-	case S2MPU02_REG_INT3M:
-		return false;
-	default:
-		return true;
-	}
-}
-
-static const struct regmap_config sec_regmap_config = {
-	.reg_bits = 8,
-	.val_bits = 8,
-};
-
-static const struct regmap_config s2mpa01_regmap_config = {
-	.reg_bits = 8,
-	.val_bits = 8,
-
-	.max_register = S2MPA01_REG_LDO_OVCB4,
-	.volatile_reg = s2mpa01_volatile,
-	.cache_type = REGCACHE_FLAT,
-};
-
-static const struct regmap_config s2mps11_regmap_config = {
-	.reg_bits = 8,
-	.val_bits = 8,
-
-	.max_register = S2MPS11_REG_L38CTRL,
-	.volatile_reg = s2mps11_volatile,
-	.cache_type = REGCACHE_FLAT,
-};
-
-static const struct regmap_config s2mps13_regmap_config = {
-	.reg_bits = 8,
-	.val_bits = 8,
-
-	.max_register = S2MPS13_REG_LDODSCH5,
-	.volatile_reg = s2mps11_volatile,
-	.cache_type = REGCACHE_FLAT,
-};
-
-static const struct regmap_config s2mps14_regmap_config = {
-	.reg_bits = 8,
-	.val_bits = 8,
-
-	.max_register = S2MPS14_REG_LDODSCH3,
-	.volatile_reg = s2mps11_volatile,
-	.cache_type = REGCACHE_FLAT,
-};
-
-static const struct regmap_config s2mps15_regmap_config = {
-	.reg_bits = 8,
-	.val_bits = 8,
-
-	.max_register = S2MPS15_REG_LDODSCH4,
-	.volatile_reg = s2mps11_volatile,
-	.cache_type = REGCACHE_FLAT,
-};
-
-static const struct regmap_config s2mpu02_regmap_config = {
-	.reg_bits = 8,
-	.val_bits = 8,
-
-	.max_register = S2MPU02_REG_DVSDATA,
-	.volatile_reg = s2mpu02_volatile,
-	.cache_type = REGCACHE_FLAT,
-};
-
-static const struct regmap_config s5m8767_regmap_config = {
-	.reg_bits = 8,
-	.val_bits = 8,
-
-	.max_register = S5M8767_REG_LDO28CTRL,
-	.volatile_reg = s2mps11_volatile,
-	.cache_type = REGCACHE_FLAT,
-};
-
 static void sec_pmic_dump_rev(struct sec_pmic_dev *sec_pmic)
 {
 	unsigned int val;
@@ -268,7 +128,7 @@ static void sec_pmic_configure(struct sec_pmic_dev *sec_pmic)
  * platform data.
  */
 static struct sec_platform_data *
-sec_pmic_i2c_parse_dt_pdata(struct device *dev)
+sec_pmic_parse_dt_pdata(struct device *dev)
 {
 	struct sec_platform_data *pd;
 
@@ -283,68 +143,34 @@ sec_pmic_i2c_parse_dt_pdata(struct device *dev)
 	return pd;
 }
 
-static int sec_pmic_probe(struct i2c_client *i2c)
+int sec_pmic_probe(struct device *dev, unsigned long device_type,
+		   unsigned int irq, struct regmap *regmap,
+		   struct i2c_client *client)
 {
-	const struct regmap_config *regmap;
 	struct sec_platform_data *pdata;
 	const struct mfd_cell *sec_devs;
 	struct sec_pmic_dev *sec_pmic;
 	int ret, num_sec_devs;
 
-	sec_pmic = devm_kzalloc(&i2c->dev, sizeof(struct sec_pmic_dev),
-				GFP_KERNEL);
+	sec_pmic = devm_kzalloc(dev, sizeof(struct sec_pmic_dev), GFP_KERNEL);
 	if (sec_pmic == NULL)
 		return -ENOMEM;
 
-	i2c_set_clientdata(i2c, sec_pmic);
-	sec_pmic->dev = &i2c->dev;
-	sec_pmic->i2c = i2c;
-	sec_pmic->irq = i2c->irq;
+	dev_set_drvdata(dev, sec_pmic);
+	sec_pmic->dev = dev;
+	sec_pmic->device_type = device_type;
+	sec_pmic->i2c = client;
+	sec_pmic->irq = irq;
+	sec_pmic->regmap_pmic = regmap;
 
-	pdata = sec_pmic_i2c_parse_dt_pdata(sec_pmic->dev);
+	pdata = sec_pmic_parse_dt_pdata(sec_pmic->dev);
 	if (IS_ERR(pdata)) {
 		ret = PTR_ERR(pdata);
 		return ret;
 	}
 
-	sec_pmic->device_type = (unsigned long)of_device_get_match_data(sec_pmic->dev);
 	sec_pmic->pdata = pdata;
 
-	switch (sec_pmic->device_type) {
-	case S2MPA01:
-		regmap = &s2mpa01_regmap_config;
-		break;
-	case S2MPS11X:
-		regmap = &s2mps11_regmap_config;
-		break;
-	case S2MPS13X:
-		regmap = &s2mps13_regmap_config;
-		break;
-	case S2MPS14X:
-		regmap = &s2mps14_regmap_config;
-		break;
-	case S2MPS15X:
-		regmap = &s2mps15_regmap_config;
-		break;
-	case S5M8767X:
-		regmap = &s5m8767_regmap_config;
-		break;
-	case S2MPU02:
-		regmap = &s2mpu02_regmap_config;
-		break;
-	default:
-		regmap = &sec_regmap_config;
-		break;
-	}
-
-	sec_pmic->regmap_pmic = devm_regmap_init_i2c(i2c, regmap);
-	if (IS_ERR(sec_pmic->regmap_pmic)) {
-		ret = PTR_ERR(sec_pmic->regmap_pmic);
-		dev_err(&i2c->dev, "Failed to allocate register map: %d\n",
-			ret);
-		return ret;
-	}
-
 	sec_irq_init(sec_pmic);
 
 	pm_runtime_set_active(sec_pmic->dev);
@@ -387,9 +213,9 @@ static int sec_pmic_probe(struct i2c_client *i2c)
 		num_sec_devs = ARRAY_SIZE(s2mpu05_devs);
 		break;
 	default:
-		dev_err(&i2c->dev, "Unsupported device type (%lu)\n",
+		dev_err(sec_pmic->dev, "Unsupported device type %lu\n",
 			sec_pmic->device_type);
-		return -ENODEV;
+		return -EINVAL;
 	}
 	ret = devm_mfd_add_devices(sec_pmic->dev, -1, sec_devs, num_sec_devs,
 				   NULL, 0, NULL);
@@ -401,10 +227,11 @@ static int sec_pmic_probe(struct i2c_client *i2c)
 
 	return ret;
 }
+EXPORT_SYMBOL_GPL(sec_pmic_probe);
 
-static void sec_pmic_shutdown(struct i2c_client *i2c)
+void sec_pmic_shutdown(struct device *dev)
 {
-	struct sec_pmic_dev *sec_pmic = i2c_get_clientdata(i2c);
+	struct sec_pmic_dev *sec_pmic = dev_get_drvdata(dev);
 	unsigned int reg, mask;
 
 	if (!sec_pmic->pdata->manual_poweroff)
@@ -428,11 +255,11 @@ static void sec_pmic_shutdown(struct i2c_client *i2c)
 
 	regmap_update_bits(sec_pmic->regmap_pmic, reg, mask, 0);
 }
+EXPORT_SYMBOL_GPL(sec_pmic_shutdown);
 
 static int sec_pmic_suspend(struct device *dev)
 {
-	struct i2c_client *i2c = to_i2c_client(dev);
-	struct sec_pmic_dev *sec_pmic = i2c_get_clientdata(i2c);
+	struct sec_pmic_dev *sec_pmic = dev_get_drvdata(dev);
 
 	if (device_may_wakeup(dev))
 		enable_irq_wake(sec_pmic->irq);
@@ -452,8 +279,7 @@ static int sec_pmic_suspend(struct device *dev)
 
 static int sec_pmic_resume(struct device *dev)
 {
-	struct i2c_client *i2c = to_i2c_client(dev);
-	struct sec_pmic_dev *sec_pmic = i2c_get_clientdata(i2c);
+	struct sec_pmic_dev *sec_pmic = dev_get_drvdata(dev);
 
 	if (device_may_wakeup(dev))
 		disable_irq_wake(sec_pmic->irq);
@@ -462,20 +288,9 @@ static int sec_pmic_resume(struct device *dev)
 	return 0;
 }
 
-static DEFINE_SIMPLE_DEV_PM_OPS(sec_pmic_pm_ops,
-				sec_pmic_suspend, sec_pmic_resume);
-
-static struct i2c_driver sec_pmic_driver = {
-	.driver = {
-		   .name = "sec_pmic",
-		   .pm = pm_sleep_ptr(&sec_pmic_pm_ops),
-		   .of_match_table = sec_dt_match,
-	},
-	.probe = sec_pmic_probe,
-	.shutdown = sec_pmic_shutdown,
-};
-module_i2c_driver(sec_pmic_driver);
+DEFINE_SIMPLE_DEV_PM_OPS(sec_pmic_pm_ops, sec_pmic_suspend, sec_pmic_resume);
+EXPORT_SYMBOL_GPL(sec_pmic_pm_ops);
 
 MODULE_AUTHOR("Sangbeom Kim <sbkim73@samsung.com>");
-MODULE_DESCRIPTION("Core support for the S5M MFD");
+MODULE_DESCRIPTION("Core driver for the Samsung S5M");
 MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/sec-core.h b/drivers/mfd/sec-core.h
index b3fded5f02a0ddc09a9508fd49a5d335f7ad0ee7..a0a3488924d96f69373e7569079cfefd0544ca26 100644
--- a/drivers/mfd/sec-core.h
+++ b/drivers/mfd/sec-core.h
@@ -10,6 +10,15 @@
 #ifndef __SEC_CORE_INT_H
 #define __SEC_CORE_INT_H
 
+struct i2c_client;
+
+extern const struct dev_pm_ops sec_pmic_pm_ops;
+
+int sec_pmic_probe(struct device *dev, unsigned long device_type,
+		   unsigned int irq, struct regmap *regmap,
+		   struct i2c_client *client);
+void sec_pmic_shutdown(struct device *dev);
+
 int sec_irq_init(struct sec_pmic_dev *sec_pmic);
 
 #endif /* __SEC_CORE_INT_H */
diff --git a/drivers/mfd/sec-i2c.c b/drivers/mfd/sec-i2c.c
new file mode 100644
index 0000000000000000000000000000000000000000..8e3a365ff3e5533e27d94fa8a15dbfa639518a5f
--- /dev/null
+++ b/drivers/mfd/sec-i2c.c
@@ -0,0 +1,231 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2012 Samsung Electronics Co., Ltd
+ *                http://www.samsung.com
+ * Copyright 2025 Linaro Ltd.
+ *
+ * Samsung SxM I2C driver
+ */
+
+#include <linux/dev_printk.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/mfd/samsung/core.h>
+#include <linux/mfd/samsung/s2mpa01.h>
+#include <linux/mfd/samsung/s2mps11.h>
+#include <linux/mfd/samsung/s2mps13.h>
+#include <linux/mfd/samsung/s2mps14.h>
+#include <linux/mfd/samsung/s2mps15.h>
+#include <linux/mfd/samsung/s2mpu02.h>
+#include <linux/mfd/samsung/s5m8767.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/pm.h>
+#include <linux/regmap.h>
+#include "sec-core.h"
+
+static bool s2mpa01_volatile(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case S2MPA01_REG_INT1M:
+	case S2MPA01_REG_INT2M:
+	case S2MPA01_REG_INT3M:
+		return false;
+	default:
+		return true;
+	}
+}
+
+static bool s2mps11_volatile(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case S2MPS11_REG_INT1M:
+	case S2MPS11_REG_INT2M:
+	case S2MPS11_REG_INT3M:
+		return false;
+	default:
+		return true;
+	}
+}
+
+static bool s2mpu02_volatile(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case S2MPU02_REG_INT1M:
+	case S2MPU02_REG_INT2M:
+	case S2MPU02_REG_INT3M:
+		return false;
+	default:
+		return true;
+	}
+}
+
+static const struct regmap_config sec_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+static const struct regmap_config s2mpa01_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = S2MPA01_REG_LDO_OVCB4,
+	.volatile_reg = s2mpa01_volatile,
+	.cache_type = REGCACHE_FLAT,
+};
+
+static const struct regmap_config s2mps11_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = S2MPS11_REG_L38CTRL,
+	.volatile_reg = s2mps11_volatile,
+	.cache_type = REGCACHE_FLAT,
+};
+
+static const struct regmap_config s2mps13_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = S2MPS13_REG_LDODSCH5,
+	.volatile_reg = s2mps11_volatile,
+	.cache_type = REGCACHE_FLAT,
+};
+
+static const struct regmap_config s2mps14_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = S2MPS14_REG_LDODSCH3,
+	.volatile_reg = s2mps11_volatile,
+	.cache_type = REGCACHE_FLAT,
+};
+
+static const struct regmap_config s2mps15_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = S2MPS15_REG_LDODSCH4,
+	.volatile_reg = s2mps11_volatile,
+	.cache_type = REGCACHE_FLAT,
+};
+
+static const struct regmap_config s2mpu02_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = S2MPU02_REG_DVSDATA,
+	.volatile_reg = s2mpu02_volatile,
+	.cache_type = REGCACHE_FLAT,
+};
+
+static const struct regmap_config s5m8767_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = S5M8767_REG_LDO28CTRL,
+	.volatile_reg = s2mps11_volatile,
+	.cache_type = REGCACHE_FLAT,
+};
+
+static int sec_pmic_i2c_probe(struct i2c_client *client)
+{
+	const struct regmap_config *regmap;
+	unsigned long device_type;
+	struct regmap *regmap_pmic;
+	int ret;
+
+	device_type = (unsigned long)of_device_get_match_data(&client->dev);
+
+	switch (device_type) {
+	case S2MPA01:
+		regmap = &s2mpa01_regmap_config;
+		break;
+	case S2MPS11X:
+		regmap = &s2mps11_regmap_config;
+		break;
+	case S2MPS13X:
+		regmap = &s2mps13_regmap_config;
+		break;
+	case S2MPS14X:
+		regmap = &s2mps14_regmap_config;
+		break;
+	case S2MPS15X:
+		regmap = &s2mps15_regmap_config;
+		break;
+	case S5M8767X:
+		regmap = &s5m8767_regmap_config;
+		break;
+	case S2MPU02:
+		regmap = &s2mpu02_regmap_config;
+		break;
+	default:
+		regmap = &sec_regmap_config;
+		break;
+	}
+
+	regmap_pmic = devm_regmap_init_i2c(client, regmap);
+	if (IS_ERR(regmap_pmic)) {
+		ret = PTR_ERR(regmap_pmic);
+		dev_err(&client->dev, "Failed to allocate register map: %d\n",
+			ret);
+		return ret;
+	}
+
+	return sec_pmic_probe(&client->dev, device_type, client->irq,
+			      regmap_pmic, client);
+}
+
+static void sec_pmic_i2c_shutdown(struct i2c_client *i2c)
+{
+	sec_pmic_shutdown(&i2c->dev);
+}
+
+static const struct of_device_id sec_pmic_i2c_of_match[] = {
+	{
+		.compatible = "samsung,s5m8767-pmic",
+		.data = (void *)S5M8767X,
+	}, {
+		.compatible = "samsung,s2dos05",
+		.data = (void *)S2DOS05,
+	}, {
+		.compatible = "samsung,s2mps11-pmic",
+		.data = (void *)S2MPS11X,
+	}, {
+		.compatible = "samsung,s2mps13-pmic",
+		.data = (void *)S2MPS13X,
+	}, {
+		.compatible = "samsung,s2mps14-pmic",
+		.data = (void *)S2MPS14X,
+	}, {
+		.compatible = "samsung,s2mps15-pmic",
+		.data = (void *)S2MPS15X,
+	}, {
+		.compatible = "samsung,s2mpa01-pmic",
+		.data = (void *)S2MPA01,
+	}, {
+		.compatible = "samsung,s2mpu02-pmic",
+		.data = (void *)S2MPU02,
+	}, {
+		.compatible = "samsung,s2mpu05-pmic",
+		.data = (void *)S2MPU05,
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, sec_pmic_i2c_of_match);
+
+static struct i2c_driver sec_pmic_i2c_driver = {
+	.driver = {
+		.name = "sec-pmic-i2c",
+		.pm = pm_sleep_ptr(&sec_pmic_pm_ops),
+		.of_match_table = sec_pmic_i2c_of_match,
+	},
+	.probe = sec_pmic_i2c_probe,
+	.shutdown = sec_pmic_i2c_shutdown,
+};
+module_i2c_driver(sec_pmic_i2c_driver);
+
+MODULE_AUTHOR("Sangbeom Kim <sbkim73@samsung.com>");
+MODULE_DESCRIPTION("I2C driver for the Samsung S5M");
+MODULE_LICENSE("GPL");

-- 
2.49.0.472.ge94155a9ec-goog

[PATCH v2 09/32] mfd: sec: add support for S2MPG10 PMIC

[André Draszik]

Add support for Samsung's S2MPG10 PMIC, which is a Power Management IC
for mobile applications with buck converters, various LDOs, power
meters, RTC, clock outputs, and additional GPIOs interfaces.

Contrary to existing Samsung S2M series PMICs supported, communication
is not via I2C, but via the Samsung ACPM firmware.

This commit adds the core driver.

Signed-off-by: André Draszik <andre.draszik@linaro.org>

---
Checkpatch suggests to update MAINTAINERS, but the new file is covered
already due to using a wildcard.

v2:
* update to using devm_acpm_get_by_node() instead of
  devm_acpm_get_by_phandle() as this is now expected to be a child of
  the ACPM node
* use c-type file header
* updates to error messages
* drop s2mpg10_rtc_wr_table as everything in RTC is writeable
* rename s2mpg10_volatile_registers -> s2mpg10_rtc_volatile_registers
* fix incorrect regmap range in common block
* add comments to regmap ranges
* add all registers to header for all IP blocks
---
 drivers/mfd/Kconfig                 |  17 ++
 drivers/mfd/Makefile                |   1 +
 drivers/mfd/sec-acpm.c              | 460 ++++++++++++++++++++++++++++++++++++
 drivers/mfd/sec-core.c              |  16 ++
 drivers/mfd/sec-irq.c               |  68 ++++++
 include/linux/mfd/samsung/core.h    |   1 +
 include/linux/mfd/samsung/irq.h     | 103 ++++++++
 include/linux/mfd/samsung/rtc.h     |  37 +++
 include/linux/mfd/samsung/s2mpg10.h | 454 +++++++++++++++++++++++++++++++++++
 9 files changed, 1157 insertions(+)

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 62565dc89ec6d58611bbc1f31c65f757343b6453..e146b28240e731557f34ebe6dea99016b6d19f6b 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1296,6 +1296,23 @@ config MFD_SEC_CORE
 	select MFD_CORE
 	select REGMAP_IRQ
 
+config MFD_SEC_ACPM
+	tristate "Samsung Electronics S2MPG1x PMICs"
+	depends on EXYNOS_ACPM_PROTOCOL
+	depends on OF
+	select MFD_SEC_CORE
+	help
+	  Support for the Samsung Electronics PMICs with ACPM interface.
+	  This is a Power Management IC for mobile applications with buck
+	  converters, various LDOs, power meters, RTC, clock outputs, and
+	  additional GPIOs interfaces.
+	  This driver provides common support for accessing the device;
+	  additional drivers must be enabled in order to use the functionality
+	  of the device.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called sec-acpm.
+
 config MFD_SEC_I2C
 	tristate "Samsung Electronics S2MPA/S2MPS1X/S2MPU/S5M series PMICs"
 	depends on I2C=y
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index ab6c4b17a391946d4c88f52ccbfee5424b4fb2d2..b617782eca436e34084a9cd24c309801c5680390 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -229,6 +229,7 @@ obj-$(CONFIG_MFD_RK8XX_I2C)	+= rk8xx-i2c.o
 obj-$(CONFIG_MFD_RK8XX_SPI)	+= rk8xx-spi.o
 obj-$(CONFIG_MFD_RN5T618)	+= rn5t618.o
 obj-$(CONFIG_MFD_SEC_CORE)	+= sec-core.o sec-irq.o
+obj-$(CONFIG_MFD_SEC_ACPM)	+= sec-acpm.o
 obj-$(CONFIG_MFD_SEC_I2C)	+= sec-i2c.o
 obj-$(CONFIG_MFD_SYSCON)	+= syscon.o
 obj-$(CONFIG_MFD_LM3533)	+= lm3533-core.o lm3533-ctrlbank.o
diff --git a/drivers/mfd/sec-acpm.c b/drivers/mfd/sec-acpm.c
new file mode 100644
index 0000000000000000000000000000000000000000..90d84b74875388746595e14b4aaef6d24c2049e9
--- /dev/null
+++ b/drivers/mfd/sec-acpm.c
@@ -0,0 +1,460 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2020 Google Inc
+ * Copyright 2025 Linaro Ltd.
+ *
+ * Samsung S2MPG1x ACPM driver
+ */
+
+#include <linux/array_size.h>
+#include <linux/device.h>
+#include <linux/firmware/samsung/exynos-acpm-protocol.h>
+#include <linux/mfd/samsung/core.h>
+#include <linux/mfd/samsung/rtc.h>
+#include <linux/mfd/samsung/s2mpg10.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include "sec-core.h"
+
+#define ACPM_MAX_BULK_DATA   8
+
+struct sec_pmic_acpm_platform_data {
+	int device_type;
+
+	unsigned int acpm_chan_id;
+	u8 speedy_channel;
+
+	const struct regmap_config *regmap_cfg_common;
+	const struct regmap_config *regmap_cfg_pmic;
+	const struct regmap_config *regmap_cfg_rtc;
+	const struct regmap_config *regmap_cfg_meter;
+};
+
+static const struct regmap_range s2mpg10_common_registers[] = {
+	regmap_reg_range(0x00, 0x02), /* CHIP_ID_M, INT, INT_MASK */
+	regmap_reg_range(0x0a, 0x0c), /* speedy control */
+	regmap_reg_range(0x1a, 0x2a), /* debug */
+};
+
+static const struct regmap_range s2mpg10_common_ro_registers[] = {
+	regmap_reg_range(0x00, 0x01),
+	regmap_reg_range(0x28, 0x2a),
+};
+
+static const struct regmap_range s2mpg10_common_nonvolatile_registers[] = {
+	regmap_reg_range(0x00, 0x00),
+	regmap_reg_range(0x02, 0x02),
+	regmap_reg_range(0x0a, 0x0c),
+};
+
+static const struct regmap_range s2mpg10_common_precious_registers[] = {
+	regmap_reg_range(0x01, 0x01),
+};
+
+static const struct regmap_access_table s2mpg10_common_wr_table = {
+	.yes_ranges = s2mpg10_common_registers,
+	.n_yes_ranges = ARRAY_SIZE(s2mpg10_common_registers),
+	.no_ranges = s2mpg10_common_ro_registers,
+	.n_no_ranges = ARRAY_SIZE(s2mpg10_common_ro_registers),
+};
+
+static const struct regmap_access_table s2mpg10_common_rd_table = {
+	.yes_ranges = s2mpg10_common_registers,
+	.n_yes_ranges = ARRAY_SIZE(s2mpg10_common_registers),
+};
+
+static const struct regmap_access_table s2mpg10_common_volatile_table = {
+	.no_ranges = s2mpg10_common_nonvolatile_registers,
+	.n_no_ranges = ARRAY_SIZE(s2mpg10_common_nonvolatile_registers),
+};
+
+static const struct regmap_access_table s2mpg10_common_precious_table = {
+	.yes_ranges = s2mpg10_common_precious_registers,
+	.n_yes_ranges = ARRAY_SIZE(s2mpg10_common_precious_registers),
+};
+
+static const struct regmap_config s2mpg10_regmap_config_common = {
+	.name = "common",
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = S2MPG10_COMMON_SPD_DEBUG4,
+	.wr_table = &s2mpg10_common_wr_table,
+	.rd_table = &s2mpg10_common_rd_table,
+	.volatile_table = &s2mpg10_common_volatile_table,
+	.precious_table = &s2mpg10_common_precious_table,
+	.num_reg_defaults_raw = S2MPG10_COMMON_SPD_DEBUG4 + 1,
+	.cache_type = REGCACHE_FLAT,
+};
+
+static const struct regmap_range s2mpg10_pmic_registers[] = {
+	regmap_reg_range(0x00, 0xf6),
+};
+
+static const struct regmap_range s2mpg10_pmic_ro_registers[] = {
+	regmap_reg_range(0x00, 0x05), /* INTx */
+	regmap_reg_range(0x0c, 0x0f), /* STATUSx PWRONSRC OFFSRC */
+	regmap_reg_range(0xc7, 0xc7), /* GPIO input */
+};
+
+static const struct regmap_range s2mpg10_pmic_nonvolatile_registers[] = {
+	regmap_reg_range(0x06, 0x0b), /* INTxM */
+};
+
+static const struct regmap_range s2mpg10_pmic_precious_registers[] = {
+	regmap_reg_range(0x00, 0x05), /* INTx */
+};
+
+static const struct regmap_access_table s2mpg10_pmic_wr_table = {
+	.yes_ranges = s2mpg10_pmic_registers,
+	.n_yes_ranges = ARRAY_SIZE(s2mpg10_pmic_registers),
+	.no_ranges = s2mpg10_pmic_ro_registers,
+	.n_no_ranges = ARRAY_SIZE(s2mpg10_pmic_ro_registers),
+};
+
+static const struct regmap_access_table s2mpg10_pmic_rd_table = {
+	.yes_ranges = s2mpg10_pmic_registers,
+	.n_yes_ranges = ARRAY_SIZE(s2mpg10_pmic_registers),
+};
+
+static const struct regmap_access_table s2mpg10_pmic_volatile_table = {
+	.no_ranges = s2mpg10_pmic_nonvolatile_registers,
+	.n_no_ranges = ARRAY_SIZE(s2mpg10_pmic_nonvolatile_registers),
+};
+
+static const struct regmap_access_table s2mpg10_pmic_precious_table = {
+	.yes_ranges = s2mpg10_pmic_precious_registers,
+	.n_yes_ranges = ARRAY_SIZE(s2mpg10_pmic_precious_registers),
+};
+
+static const struct regmap_config s2mpg10_regmap_config_pmic = {
+	.name = "pmic",
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = S2MPG10_PMIC_LDO_SENSE4,
+	.wr_table = &s2mpg10_pmic_wr_table,
+	.rd_table = &s2mpg10_pmic_rd_table,
+	.volatile_table = &s2mpg10_pmic_volatile_table,
+	.precious_table = &s2mpg10_pmic_precious_table,
+	.num_reg_defaults_raw = S2MPG10_PMIC_LDO_SENSE4 + 1,
+	.cache_type = REGCACHE_FLAT,
+};
+
+static const struct regmap_range s2mpg10_rtc_registers[] = {
+	regmap_reg_range(0x00, 0x2b), /* RTC */
+};
+
+static const struct regmap_range s2mpg10_rtc_volatile_registers[] = {
+	regmap_reg_range(0x01, 0x01), /* RTC_UPDATE */
+	regmap_reg_range(0x05, 0x0c), /* time / date */
+};
+
+static const struct regmap_access_table s2mpg10_rtc_rd_table = {
+	.yes_ranges = s2mpg10_rtc_registers,
+	.n_yes_ranges = ARRAY_SIZE(s2mpg10_rtc_registers),
+};
+
+static const struct regmap_access_table s2mpg10_rtc_volatile_table = {
+	.yes_ranges = s2mpg10_rtc_volatile_registers,
+	.n_yes_ranges = ARRAY_SIZE(s2mpg10_rtc_volatile_registers),
+};
+
+static const struct regmap_config s2mpg10_regmap_config_rtc = {
+	.name = "rtc",
+	.reg_bits = 8,
+	.val_bits = 8,
+	.reg_stride = 1,
+	.max_register = S2MPG10_RTC_OSC_CTRL,
+	.rd_table = &s2mpg10_rtc_rd_table,
+	.volatile_table = &s2mpg10_rtc_volatile_table,
+	.num_reg_defaults_raw = S2MPG10_RTC_OSC_CTRL + 1,
+	.cache_type = REGCACHE_FLAT,
+};
+
+static const struct regmap_range s2mpg10_meter_registers[] = {
+	regmap_reg_range(0x00, 0x21), /* meter config */
+	regmap_reg_range(0x40, 0x8a), /* meter data */
+	regmap_reg_range(0xee, 0xee), /* offset */
+	regmap_reg_range(0xf1, 0xf1), /* trim */
+};
+
+static const struct regmap_range s2mpg10_meter_ro_registers[] = {
+	regmap_reg_range(0x40, 0x8a),
+};
+
+static const struct regmap_access_table s2mpg10_meter_wr_table = {
+	.yes_ranges = s2mpg10_meter_registers,
+	.n_yes_ranges = ARRAY_SIZE(s2mpg10_meter_registers),
+	.no_ranges = s2mpg10_meter_ro_registers,
+	.n_no_ranges = ARRAY_SIZE(s2mpg10_meter_ro_registers),
+};
+
+static const struct regmap_access_table s2mpg10_meter_rd_table = {
+	.yes_ranges = s2mpg10_meter_registers,
+	.n_yes_ranges = ARRAY_SIZE(s2mpg10_meter_registers),
+};
+
+static const struct regmap_access_table s2mpg10_meter_volatile_table = {
+	.yes_ranges = s2mpg10_meter_ro_registers,
+	.n_yes_ranges = ARRAY_SIZE(s2mpg10_meter_ro_registers),
+};
+
+static const struct regmap_config s2mpg10_regmap_config_meter = {
+	.name = "meter",
+	.reg_bits = 8,
+	.val_bits = 8,
+	.reg_stride = 1,
+	.max_register = S2MPG10_METER_BUCK_METER_TRIM3,
+	.wr_table = &s2mpg10_meter_wr_table,
+	.rd_table = &s2mpg10_meter_rd_table,
+	.volatile_table = &s2mpg10_meter_volatile_table,
+	.num_reg_defaults_raw = S2MPG10_METER_BUCK_METER_TRIM3 + 1,
+	.cache_type = REGCACHE_FLAT,
+};
+
+struct sec_acpm_shared_bus_context {
+	const struct acpm_handle *acpm;
+	unsigned int acpm_chan_id;
+	u8 speedy_channel;
+};
+
+struct sec_acpm_bus_context {
+	struct sec_acpm_shared_bus_context *shared;
+	u8 type;
+#define SEC_ACPM_TYPE_COMMON  0x00
+#define SEC_ACPM_TYPE_PMIC    0x01
+#define SEC_ACPM_TYPE_RTC     0x02
+#define SEC_ACPM_TYPE_METER   0x0a
+#define SEC_ACPM_TYPE_WLWP    0x0b
+#define SEC_ACPM_TYPE_TRIM    0x0f
+};
+
+static int sec_acpm_bus_write(void *context, const void *data, size_t count)
+{
+	struct sec_acpm_bus_context *ctx = context;
+	const struct acpm_handle *acpm = ctx->shared->acpm;
+	const struct acpm_pmic_ops *pmic_ops = &acpm->ops.pmic_ops;
+	u8 reg;
+
+	if (count < 2 || count > (ACPM_MAX_BULK_DATA + 1))
+		return -EINVAL;
+
+	reg = *(u8 *)data;
+	++data;
+	--count;
+
+	return pmic_ops->bulk_write(acpm, ctx->shared->acpm_chan_id,
+				    ctx->type, reg,
+				    ctx->shared->speedy_channel, count, data);
+}
+
+static int sec_acpm_bus_read(void *context, const void *reg_buf,
+			     size_t reg_size, void *val_buf,
+			     size_t val_size)
+{
+	struct sec_acpm_bus_context *ctx = context;
+	const struct acpm_handle *acpm = ctx->shared->acpm;
+	const struct acpm_pmic_ops *pmic_ops = &acpm->ops.pmic_ops;
+	u8 reg;
+
+	if (reg_size != 1 || !val_size || val_size > ACPM_MAX_BULK_DATA)
+		return -EINVAL;
+
+	reg = *(u8 *)reg_buf;
+
+	return pmic_ops->bulk_read(acpm, ctx->shared->acpm_chan_id,
+				   ctx->type, reg,
+				   ctx->shared->speedy_channel,
+				   val_size, val_buf);
+}
+
+static int sec_acpm_bus_reg_update_bits(void *context, unsigned int reg,
+					unsigned int mask, unsigned int val)
+{
+	struct sec_acpm_bus_context *ctx = context;
+	const struct acpm_handle *acpm = ctx->shared->acpm;
+	const struct acpm_pmic_ops *pmic_ops = &acpm->ops.pmic_ops;
+
+	return pmic_ops->update_reg(acpm, ctx->shared->acpm_chan_id,
+				    ctx->type, reg & 0xff,
+				    ctx->shared->speedy_channel, val, mask);
+}
+
+static const struct regmap_bus sec_pmic_acpm_regmap_bus = {
+	.write = sec_acpm_bus_write,
+	.read = sec_acpm_bus_read,
+	.reg_update_bits = sec_acpm_bus_reg_update_bits,
+	.max_raw_read = ACPM_MAX_BULK_DATA,
+	.max_raw_write = ACPM_MAX_BULK_DATA,
+};
+
+static struct regmap *
+sec_pmic_acpm_regmap_init(struct device *dev,
+			  struct sec_acpm_shared_bus_context *shared_ctx,
+			  u8 type, const struct regmap_config *cfg,
+			  bool do_attach)
+{
+	struct sec_acpm_bus_context *ctx;
+	struct regmap *regmap;
+
+	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return ERR_PTR(-ENOMEM);
+
+	ctx->shared = shared_ctx;
+	ctx->type = type;
+
+	regmap = devm_regmap_init(dev, &sec_pmic_acpm_regmap_bus, ctx, cfg);
+	if (IS_ERR(regmap))
+		return ERR_PTR(dev_err_probe(dev, PTR_ERR(regmap),
+					     "regmap init (%s) failed\n",
+					     cfg->name));
+
+	if (do_attach) {
+		int ret;
+
+		ret = regmap_attach_dev(dev, regmap, cfg);
+		if (ret)
+			return ERR_PTR(dev_err_probe(dev, ret,
+						     "regmap attach (%s) failed\n",
+						     cfg->name));
+	}
+
+	return regmap;
+}
+
+static void sec_acpm_mask_common_irqs(void *regmap_common)
+{
+	/* Mask all interrupts from 'common' block on shutdown */
+	regmap_write(regmap_common, S2MPG10_COMMON_INT_MASK,
+		     S2MPG10_COMMON_INT_SRC);
+}
+
+static int sec_pmic_acpm_probe(struct platform_device *pdev)
+{
+	struct regmap *regmap_common, *regmap_pmic, *regmap;
+	const struct sec_pmic_acpm_platform_data *pdata;
+	struct sec_acpm_shared_bus_context *shared_ctx;
+	const struct acpm_handle *acpm;
+	struct device *dev;
+	int ret, irq;
+
+	dev = &pdev->dev;
+
+	pdata = device_get_match_data(dev);
+	if (!pdata)
+		return dev_err_probe(dev, -ENODEV,
+				     "unsupported device type\n");
+
+	acpm = devm_acpm_get_by_node(dev, pdev->dev.parent->of_node);
+	if (IS_ERR(acpm))
+		return dev_err_probe(dev, PTR_ERR(acpm),
+				     "failed to get acpm (2)\n");
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	shared_ctx = devm_kzalloc(dev, sizeof(*shared_ctx), GFP_KERNEL);
+	if (!shared_ctx)
+		return -ENOMEM;
+
+	shared_ctx->acpm = acpm;
+	shared_ctx->acpm_chan_id = pdata->acpm_chan_id;
+	shared_ctx->speedy_channel = pdata->speedy_channel;
+
+	regmap_common = sec_pmic_acpm_regmap_init(dev, shared_ctx,
+						  SEC_ACPM_TYPE_COMMON,
+						  pdata->regmap_cfg_common,
+						  false);
+	if (IS_ERR(regmap_common))
+		return PTR_ERR(regmap_common);
+
+	/* Mask all interrupts from 'common' block, until successful init */
+	ret = regmap_write(regmap_common, S2MPG10_COMMON_INT_MASK,
+			   S2MPG10_COMMON_INT_SRC);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "failed to mask common block interrupts\n");
+
+	regmap_pmic = sec_pmic_acpm_regmap_init(dev, shared_ctx,
+						SEC_ACPM_TYPE_PMIC,
+						pdata->regmap_cfg_pmic,
+						false);
+	if (IS_ERR(regmap_pmic))
+		return PTR_ERR(regmap_pmic);
+
+	regmap = sec_pmic_acpm_regmap_init(dev, shared_ctx, SEC_ACPM_TYPE_RTC,
+					   pdata->regmap_cfg_rtc, true);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	regmap = sec_pmic_acpm_regmap_init(dev, shared_ctx, SEC_ACPM_TYPE_METER,
+					   pdata->regmap_cfg_meter, true);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	ret = sec_pmic_probe(dev, pdata->device_type, irq, regmap_pmic, NULL);
+	if (ret)
+		return ret;
+
+	if (device_property_read_bool(dev, "wakeup-source"))
+		devm_device_init_wakeup(dev);
+
+	/*
+	 * Unmask PMIC interrupt from 'common' block, now that everything is in
+	 * place.
+	 */
+	ret = regmap_clear_bits(regmap_common, S2MPG10_COMMON_INT_MASK,
+				S2MPG10_COMMON_INT_SRC_PMIC);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "failed to unmask PMIC interrupt\n");
+
+	ret = devm_add_action_or_reset(dev, sec_acpm_mask_common_irqs,
+				       regmap_common);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static void sec_pmic_acpm_shutdown(struct platform_device *pdev)
+{
+	sec_pmic_shutdown(&pdev->dev);
+}
+
+static const struct sec_pmic_acpm_platform_data s2mpg10_data = {
+	.device_type = S2MPG10,
+	.acpm_chan_id = 2,
+	.speedy_channel = 0,
+	.regmap_cfg_common = &s2mpg10_regmap_config_common,
+	.regmap_cfg_pmic = &s2mpg10_regmap_config_pmic,
+	.regmap_cfg_rtc = &s2mpg10_regmap_config_rtc,
+	.regmap_cfg_meter = &s2mpg10_regmap_config_meter,
+};
+
+static const struct of_device_id sec_pmic_acpm_of_match[] = {
+	{ .compatible = "samsung,s2mpg10-pmic", .data = &s2mpg10_data, },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, sec_pmic_acpm_of_match);
+
+static struct platform_driver sec_pmic_acpm_driver = {
+	.driver = {
+		.name = "sec-pmic-acpm",
+		.pm = pm_sleep_ptr(&sec_pmic_pm_ops),
+		.of_match_table = sec_pmic_acpm_of_match,
+	},
+	.probe = sec_pmic_acpm_probe,
+	.shutdown = sec_pmic_acpm_shutdown,
+};
+module_platform_driver(sec_pmic_acpm_driver);
+
+MODULE_AUTHOR("André Draszik <andre.draszik@linaro.org>");
+MODULE_DESCRIPTION("ACPM driver for the Samsung S2MPG1x");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c
index bb664e052bf5198f2fc83a86bd6e1e72364fb8df..c4b7abe511090d8f5ff2eb501f325cc8173b9bf5 100644
--- a/drivers/mfd/sec-core.c
+++ b/drivers/mfd/sec-core.c
@@ -36,6 +36,14 @@ static const struct mfd_cell s2dos05_devs[] = {
 	{ .name = "s2dos05-regulator", },
 };
 
+static const struct mfd_cell s2mpg10_devs[] = {
+	MFD_CELL_NAME("s2mpg10-meter"),
+	MFD_CELL_NAME("s2mpg10-regulator"),
+	MFD_CELL_NAME("s2mpg10-rtc"),
+	MFD_CELL_OF("s2mpg10-clk", NULL, NULL, 0, 0, "samsung,s2mpg10-clk"),
+	MFD_CELL_OF("s2mpg10-gpio", NULL, NULL, 0, 0, "samsung,s2mpg10-gpio"),
+};
+
 static const struct mfd_cell s2mps11_devs[] = {
 	{ .name = "s2mps11-regulator", },
 	{ .name = "s2mps14-rtc", },
@@ -90,6 +98,10 @@ static void sec_pmic_dump_rev(struct sec_pmic_dev *sec_pmic)
 {
 	unsigned int val;
 
+	/* For s2mpg1x, the revision is in a different regmap */
+	if (sec_pmic->device_type == S2MPG10)
+		return;
+
 	/* For each device type, the REG_ID is always the first register */
 	if (!regmap_read(sec_pmic->regmap_pmic, S2MPS11_REG_ID, &val))
 		dev_dbg(sec_pmic->dev, "Revision: 0x%x\n", val);
@@ -188,6 +200,10 @@ int sec_pmic_probe(struct device *dev, unsigned long device_type,
 		sec_devs = s2mpa01_devs;
 		num_sec_devs = ARRAY_SIZE(s2mpa01_devs);
 		break;
+	case S2MPG10:
+		sec_devs = s2mpg10_devs;
+		num_sec_devs = ARRAY_SIZE(s2mpg10_devs);
+		break;
 	case S2MPS11X:
 		sec_devs = s2mps11_devs;
 		num_sec_devs = ARRAY_SIZE(s2mps11_devs);
diff --git a/drivers/mfd/sec-irq.c b/drivers/mfd/sec-irq.c
index 4d49bb42bd0d109263f485c8b58e88cdd8d598d9..bf86281401ac6ff05c90c2d71c84744709ed79cb 100644
--- a/drivers/mfd/sec-irq.c
+++ b/drivers/mfd/sec-irq.c
@@ -11,6 +11,7 @@
 #include <linux/irq.h>
 #include <linux/mfd/samsung/core.h>
 #include <linux/mfd/samsung/irq.h>
+#include <linux/mfd/samsung/s2mpg10.h>
 #include <linux/mfd/samsung/s2mps11.h>
 #include <linux/mfd/samsung/s2mps14.h>
 #include <linux/mfd/samsung/s2mpu02.h>
@@ -20,6 +21,60 @@
 #include <linux/regmap.h>
 #include "sec-core.h"
 
+static const struct regmap_irq s2mpg10_irqs[] = {
+	REGMAP_IRQ_REG(S2MPG10_IRQ_PWRONF, 0, S2MPG10_IRQ_PWRONF_MASK),
+	REGMAP_IRQ_REG(S2MPG10_IRQ_PWRONR, 0, S2MPG10_IRQ_PWRONR_MASK),
+	REGMAP_IRQ_REG(S2MPG10_IRQ_JIGONBF, 0, S2MPG10_IRQ_JIGONBF_MASK),
+	REGMAP_IRQ_REG(S2MPG10_IRQ_JIGONBR, 0, S2MPG10_IRQ_JIGONBR_MASK),
+	REGMAP_IRQ_REG(S2MPG10_IRQ_ACOKBF, 0, S2MPG10_IRQ_ACOKBF_MASK),
+	REGMAP_IRQ_REG(S2MPG10_IRQ_ACOKBR, 0, S2MPG10_IRQ_ACOKBR_MASK),
+	REGMAP_IRQ_REG(S2MPG10_IRQ_PWRON1S, 0, S2MPG10_IRQ_PWRON1S_MASK),
+	REGMAP_IRQ_REG(S2MPG10_IRQ_MRB, 0, S2MPG10_IRQ_MRB_MASK),
+
+	REGMAP_IRQ_REG(S2MPG10_IRQ_RTC60S, 1, S2MPG10_IRQ_RTC60S_MASK),
+	REGMAP_IRQ_REG(S2MPG10_IRQ_RTCA1, 1, S2MPG10_IRQ_RTCA1_MASK),
+	REGMAP_IRQ_REG(S2MPG10_IRQ_RTCA0, 1, S2MPG10_IRQ_RTCA0_MASK),
+	REGMAP_IRQ_REG(S2MPG10_IRQ_RTC1S, 1, S2MPG10_IRQ_RTC1S_MASK),
+	REGMAP_IRQ_REG(S2MPG10_IRQ_WTSR_COLDRST, 1, S2MPG10_IRQ_WTSR_COLDRST_MASK),
+	REGMAP_IRQ_REG(S2MPG10_IRQ_WTSR, 1, S2MPG10_IRQ_WTSR_MASK),
+	REGMAP_IRQ_REG(S2MPG10_IRQ_WRST, 1, S2MPG10_IRQ_WRST_MASK),
+	REGMAP_IRQ_REG(S2MPG10_IRQ_SMPL, 1, S2MPG10_IRQ_SMPL_MASK),
+
+	REGMAP_IRQ_REG(S2MPG10_IRQ_120C, 2, S2MPG10_IRQ_INT120C_MASK),
+	REGMAP_IRQ_REG(S2MPG10_IRQ_140C, 2, S2MPG10_IRQ_INT140C_MASK),
+	REGMAP_IRQ_REG(S2MPG10_IRQ_TSD, 2, S2MPG10_IRQ_TSD_MASK),
+	REGMAP_IRQ_REG(S2MPG10_IRQ_PIF_TIMEOUT1, 2, S2MPG10_IRQ_PIF_TIMEOUT1_MASK),
+	REGMAP_IRQ_REG(S2MPG10_IRQ_PIF_TIMEOUT2, 2, S2MPG10_IRQ_PIF_TIMEOUT2_MASK),
+	REGMAP_IRQ_REG(S2MPG10_IRQ_SPD_PARITY_ERR, 2, S2MPG10_IRQ_SPD_PARITY_ERR_MASK),
+	REGMAP_IRQ_REG(S2MPG10_IRQ_SPD_ABNORMAL_STOP, 2, S2MPG10_IRQ_SPD_ABNORMAL_STOP_MASK),
+	REGMAP_IRQ_REG(S2MPG10_IRQ_PMETER_OVERF, 2, S2MPG10_IRQ_PMETER_OVERF_MASK),
+
+	REGMAP_IRQ_REG(S2MPG10_IRQ_OCP_B1M, 3, S2MPG10_IRQ_OCP_B1M_MASK),
+	REGMAP_IRQ_REG(S2MPG10_IRQ_OCP_B2M, 3, S2MPG10_IRQ_OCP_B2M_MASK),
+	REGMAP_IRQ_REG(S2MPG10_IRQ_OCP_B3M, 3, S2MPG10_IRQ_OCP_B3M_MASK),
+	REGMAP_IRQ_REG(S2MPG10_IRQ_OCP_B4M, 3, S2MPG10_IRQ_OCP_B4M_MASK),
+	REGMAP_IRQ_REG(S2MPG10_IRQ_OCP_B5M, 3, S2MPG10_IRQ_OCP_B5M_MASK),
+	REGMAP_IRQ_REG(S2MPG10_IRQ_OCP_B6M, 3, S2MPG10_IRQ_OCP_B6M_MASK),
+	REGMAP_IRQ_REG(S2MPG10_IRQ_OCP_B7M, 3, S2MPG10_IRQ_OCP_B7M_MASK),
+	REGMAP_IRQ_REG(S2MPG10_IRQ_OCP_B8M, 3, S2MPG10_IRQ_OCP_B8M_MASK),
+
+	REGMAP_IRQ_REG(S2MPG10_IRQ_OCP_B9M, 4, S2MPG10_IRQ_OCP_B9M_MASK),
+	REGMAP_IRQ_REG(S2MPG10_IRQ_OCP_B10M, 4, S2MPG10_IRQ_OCP_B10M_MASK),
+	REGMAP_IRQ_REG(S2MPG10_IRQ_WLWP_ACC, 4, S2MPG10_IRQ_WLWP_ACC_MASK),
+	REGMAP_IRQ_REG(S2MPG10_IRQ_SMPL_TIMEOUT, 4, S2MPG10_IRQ_SMPL_TIMEOUT_MASK),
+	REGMAP_IRQ_REG(S2MPG10_IRQ_WTSR_TIMEOUT, 4, S2MPG10_IRQ_WTSR_TIMEOUT_MASK),
+	REGMAP_IRQ_REG(S2MPG10_IRQ_SPD_SRP_PKT_RST, 4, S2MPG10_IRQ_SPD_SRP_PKT_RST_MASK),
+
+	REGMAP_IRQ_REG(S2MPG10_IRQ_PWR_WARN_CH0, 5, S2MPG10_IRQ_PWR_WARN_CH0_MASK),
+	REGMAP_IRQ_REG(S2MPG10_IRQ_PWR_WARN_CH1, 5, S2MPG10_IRQ_PWR_WARN_CH1_MASK),
+	REGMAP_IRQ_REG(S2MPG10_IRQ_PWR_WARN_CH2, 5, S2MPG10_IRQ_PWR_WARN_CH2_MASK),
+	REGMAP_IRQ_REG(S2MPG10_IRQ_PWR_WARN_CH3, 5, S2MPG10_IRQ_PWR_WARN_CH3_MASK),
+	REGMAP_IRQ_REG(S2MPG10_IRQ_PWR_WARN_CH4, 5, S2MPG10_IRQ_PWR_WARN_CH4_MASK),
+	REGMAP_IRQ_REG(S2MPG10_IRQ_PWR_WARN_CH5, 5, S2MPG10_IRQ_PWR_WARN_CH5_MASK),
+	REGMAP_IRQ_REG(S2MPG10_IRQ_PWR_WARN_CH6, 5, S2MPG10_IRQ_PWR_WARN_CH6_MASK),
+	REGMAP_IRQ_REG(S2MPG10_IRQ_PWR_WARN_CH7, 5, S2MPG10_IRQ_PWR_WARN_CH7_MASK),
+};
+
 static const struct regmap_irq s2mps11_irqs[] = {
 	[S2MPS11_IRQ_PWRONF] = {
 		.reg_offset = 0,
@@ -320,6 +375,16 @@ static const struct regmap_irq s5m8767_irqs[] = {
 	},
 };
 
+static const struct regmap_irq_chip s2mpg10_irq_chip = {
+	.name = "s2mpg10",
+	.irqs = s2mpg10_irqs,
+	.num_irqs = ARRAY_SIZE(s2mpg10_irqs),
+	.num_regs = 6,
+	.status_base = S2MPG10_PMIC_INT1,
+	.mask_base = S2MPG10_PMIC_INT1M,
+	/* all interrupt sources are read-to-clear */
+};
+
 static const struct regmap_irq_chip s2mps11_irq_chip = {
 	.name = "s2mps11",
 	.irqs = s2mps11_irqs,
@@ -402,6 +467,9 @@ int sec_irq_init(struct sec_pmic_dev *sec_pmic)
 	case S2MPA01:
 		sec_irq_chip = &s2mps14_irq_chip;
 		break;
+	case S2MPG10:
+		sec_irq_chip = &s2mpg10_irq_chip;
+		break;
 	case S2MPS11X:
 		sec_irq_chip = &s2mps11_irq_chip;
 		break;
diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h
index 8a4e660854bbc955b812b4d61d4a52a0fc2f2899..c1102324172a9b6bd6072b5929a4866d6c9653fa 100644
--- a/include/linux/mfd/samsung/core.h
+++ b/include/linux/mfd/samsung/core.h
@@ -39,6 +39,7 @@ enum sec_device_type {
 	S5M8767X,
 	S2DOS05,
 	S2MPA01,
+	S2MPG10,
 	S2MPS11X,
 	S2MPS13X,
 	S2MPS14X,
diff --git a/include/linux/mfd/samsung/irq.h b/include/linux/mfd/samsung/irq.h
index 978f7af66f74842c4f8dd62c0f58a7a45aba7c34..b4805cbd949bd605004bd88cf361109d1cbbc3bf 100644
--- a/include/linux/mfd/samsung/irq.h
+++ b/include/linux/mfd/samsung/irq.h
@@ -57,6 +57,109 @@ enum s2mpa01_irq {
 #define S2MPA01_IRQ_B24_TSD_MASK	(1 << 4)
 #define S2MPA01_IRQ_B35_TSD_MASK	(1 << 5)
 
+enum s2mpg10_irq {
+	/* PMIC */
+	S2MPG10_IRQ_PWRONF,
+	S2MPG10_IRQ_PWRONR,
+	S2MPG10_IRQ_JIGONBF,
+	S2MPG10_IRQ_JIGONBR,
+	S2MPG10_IRQ_ACOKBF,
+	S2MPG10_IRQ_ACOKBR,
+	S2MPG10_IRQ_PWRON1S,
+	S2MPG10_IRQ_MRB,
+#define S2MPG10_IRQ_PWRONF_MASK		BIT(0)
+#define S2MPG10_IRQ_PWRONR_MASK		BIT(1)
+#define S2MPG10_IRQ_JIGONBF_MASK	BIT(2)
+#define S2MPG10_IRQ_JIGONBR_MASK	BIT(3)
+#define S2MPG10_IRQ_ACOKBF_MASK		BIT(4)
+#define S2MPG10_IRQ_ACOKBR_MASK		BIT(5)
+#define S2MPG10_IRQ_PWRON1S_MASK	BIT(6)
+#define S2MPG10_IRQ_MRB_MASK		BIT(7)
+
+	S2MPG10_IRQ_RTC60S,
+	S2MPG10_IRQ_RTCA1,
+	S2MPG10_IRQ_RTCA0,
+	S2MPG10_IRQ_RTC1S,
+	S2MPG10_IRQ_WTSR_COLDRST,
+	S2MPG10_IRQ_WTSR,
+	S2MPG10_IRQ_WRST,
+	S2MPG10_IRQ_SMPL,
+#define S2MPG10_IRQ_RTC60S_MASK		BIT(0)
+#define S2MPG10_IRQ_RTCA1_MASK		BIT(1)
+#define S2MPG10_IRQ_RTCA0_MASK		BIT(2)
+#define S2MPG10_IRQ_RTC1S_MASK		BIT(3)
+#define S2MPG10_IRQ_WTSR_COLDRST_MASK	BIT(4)
+#define S2MPG10_IRQ_WTSR_MASK		BIT(5)
+#define S2MPG10_IRQ_WRST_MASK		BIT(6)
+#define S2MPG10_IRQ_SMPL_MASK		BIT(7)
+
+	S2MPG10_IRQ_120C,
+	S2MPG10_IRQ_140C,
+	S2MPG10_IRQ_TSD,
+	S2MPG10_IRQ_PIF_TIMEOUT1,
+	S2MPG10_IRQ_PIF_TIMEOUT2,
+	S2MPG10_IRQ_SPD_PARITY_ERR,
+	S2MPG10_IRQ_SPD_ABNORMAL_STOP,
+	S2MPG10_IRQ_PMETER_OVERF,
+#define S2MPG10_IRQ_INT120C_MASK		BIT(0)
+#define S2MPG10_IRQ_INT140C_MASK		BIT(1)
+#define S2MPG10_IRQ_TSD_MASK			BIT(2)
+#define S2MPG10_IRQ_PIF_TIMEOUT1_MASK		BIT(3)
+#define S2MPG10_IRQ_PIF_TIMEOUT2_MASK		BIT(4)
+#define S2MPG10_IRQ_SPD_PARITY_ERR_MASK		BIT(5)
+#define S2MPG10_IRQ_SPD_ABNORMAL_STOP_MASK	BIT(6)
+#define S2MPG10_IRQ_PMETER_OVERF_MASK		BIT(7)
+
+	S2MPG10_IRQ_OCP_B1M,
+	S2MPG10_IRQ_OCP_B2M,
+	S2MPG10_IRQ_OCP_B3M,
+	S2MPG10_IRQ_OCP_B4M,
+	S2MPG10_IRQ_OCP_B5M,
+	S2MPG10_IRQ_OCP_B6M,
+	S2MPG10_IRQ_OCP_B7M,
+	S2MPG10_IRQ_OCP_B8M,
+#define S2MPG10_IRQ_OCP_B1M_MASK	BIT(0)
+#define S2MPG10_IRQ_OCP_B2M_MASK	BIT(1)
+#define S2MPG10_IRQ_OCP_B3M_MASK	BIT(2)
+#define S2MPG10_IRQ_OCP_B4M_MASK	BIT(3)
+#define S2MPG10_IRQ_OCP_B5M_MASK	BIT(4)
+#define S2MPG10_IRQ_OCP_B6M_MASK	BIT(5)
+#define S2MPG10_IRQ_OCP_B7M_MASK	BIT(6)
+#define S2MPG10_IRQ_OCP_B8M_MASK	BIT(7)
+
+	S2MPG10_IRQ_OCP_B9M,
+	S2MPG10_IRQ_OCP_B10M,
+	S2MPG10_IRQ_WLWP_ACC,
+	S2MPG10_IRQ_SMPL_TIMEOUT,
+	S2MPG10_IRQ_WTSR_TIMEOUT,
+	S2MPG10_IRQ_SPD_SRP_PKT_RST,
+#define S2MPG10_IRQ_OCP_B9M_MASK		BIT(0)
+#define S2MPG10_IRQ_OCP_B10M_MASK		BIT(1)
+#define S2MPG10_IRQ_WLWP_ACC_MASK		BIT(2)
+#define S2MPG10_IRQ_SMPL_TIMEOUT_MASK		BIT(5)
+#define S2MPG10_IRQ_WTSR_TIMEOUT_MASK		BIT(6)
+#define S2MPG10_IRQ_SPD_SRP_PKT_RST_MASK	BIT(7)
+
+	S2MPG10_IRQ_PWR_WARN_CH0,
+	S2MPG10_IRQ_PWR_WARN_CH1,
+	S2MPG10_IRQ_PWR_WARN_CH2,
+	S2MPG10_IRQ_PWR_WARN_CH3,
+	S2MPG10_IRQ_PWR_WARN_CH4,
+	S2MPG10_IRQ_PWR_WARN_CH5,
+	S2MPG10_IRQ_PWR_WARN_CH6,
+	S2MPG10_IRQ_PWR_WARN_CH7,
+#define S2MPG10_IRQ_PWR_WARN_CH0_MASK	BIT(0)
+#define S2MPG10_IRQ_PWR_WARN_CH1_MASK	BIT(1)
+#define S2MPG10_IRQ_PWR_WARN_CH2_MASK	BIT(2)
+#define S2MPG10_IRQ_PWR_WARN_CH3_MASK	BIT(3)
+#define S2MPG10_IRQ_PWR_WARN_CH4_MASK	BIT(4)
+#define S2MPG10_IRQ_PWR_WARN_CH5_MASK	BIT(5)
+#define S2MPG10_IRQ_PWR_WARN_CH6_MASK	BIT(6)
+#define S2MPG10_IRQ_PWR_WARN_CH7_MASK	BIT(7)
+
+	S2MPG10_IRQ_NR,
+};
+
 enum s2mps11_irq {
 	S2MPS11_IRQ_PWRONF,
 	S2MPS11_IRQ_PWRONR,
diff --git a/include/linux/mfd/samsung/rtc.h b/include/linux/mfd/samsung/rtc.h
index 0204decfc9aacbf4bc93d98a256f1d956bbcd19c..51c4239a1fa6f28155711a0756b0e071b010d848 100644
--- a/include/linux/mfd/samsung/rtc.h
+++ b/include/linux/mfd/samsung/rtc.h
@@ -72,6 +72,37 @@ enum s2mps_rtc_reg {
 	S2MPS_RTC_REG_MAX,
 };
 
+enum s2mpg10_rtc_reg {
+	S2MPG10_RTC_CTRL,
+	S2MPG10_RTC_UPDATE,
+	S2MPG10_RTC_SMPL,
+	S2MPG10_RTC_WTSR,
+	S2MPG10_RTC_CAP_SEL,
+	S2MPG10_RTC_MSEC,
+	S2MPG10_RTC_SEC,
+	S2MPG10_RTC_MIN,
+	S2MPG10_RTC_HOUR,
+	S2MPG10_RTC_WEEK,
+	S2MPG10_RTC_DAY,
+	S2MPG10_RTC_MON,
+	S2MPG10_RTC_YEAR,
+	S2MPG10_RTC_A0SEC,
+	S2MPG10_RTC_A0MIN,
+	S2MPG10_RTC_A0HOUR,
+	S2MPG10_RTC_A0WEEK,
+	S2MPG10_RTC_A0DAY,
+	S2MPG10_RTC_A0MON,
+	S2MPG10_RTC_A0YEAR,
+	S2MPG10_RTC_A1SEC,
+	S2MPG10_RTC_A1MIN,
+	S2MPG10_RTC_A1HOUR,
+	S2MPG10_RTC_A1WEEK,
+	S2MPG10_RTC_A1DAY,
+	S2MPG10_RTC_A1MON,
+	S2MPG10_RTC_A1YEAR,
+	S2MPG10_RTC_OSC_CTRL,
+};
+
 #define RTC_I2C_ADDR		(0x0C >> 1)
 
 #define HOUR_12			(1 << 7)
@@ -124,10 +155,16 @@ enum s2mps_rtc_reg {
 #define ALARM_ENABLE_SHIFT	7
 #define ALARM_ENABLE_MASK	(1 << ALARM_ENABLE_SHIFT)
 
+/* WTSR & SMPL registers */
 #define SMPL_ENABLE_SHIFT	7
 #define SMPL_ENABLE_MASK	(1 << SMPL_ENABLE_SHIFT)
 
 #define WTSR_ENABLE_SHIFT	6
 #define WTSR_ENABLE_MASK	(1 << WTSR_ENABLE_SHIFT)
 
+#define S2MPG10_WTSR_COLDTIMER	GENMASK(6, 5)
+#define S2MPG10_WTSR_COLDRST	BIT(4)
+#define S2MPG10_WTSR_WTSRT	GENMASK(3, 1)
+#define S2MPG10_WTSR_WTSR_EN	BIT(0)
+
 #endif /*  __LINUX_MFD_SEC_RTC_H */
diff --git a/include/linux/mfd/samsung/s2mpg10.h b/include/linux/mfd/samsung/s2mpg10.h
new file mode 100644
index 0000000000000000000000000000000000000000..778ff16ef6668ded514e8dc7242f369cb9c2d0e6
--- /dev/null
+++ b/include/linux/mfd/samsung/s2mpg10.h
@@ -0,0 +1,454 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2015 Samsung Electronics
+ * Copyright 2020 Google Inc
+ * Copyright 2025 Linaro Ltd.
+ */
+
+#ifndef __LINUX_MFD_S2MPG10_H
+#define __LINUX_MFD_S2MPG10_H
+
+/* Common registers (type 0x000) */
+enum s2mpg10_common_reg {
+	S2MPG10_COMMON_CHIPID,
+	S2MPG10_COMMON_INT,
+	S2MPG10_COMMON_INT_MASK,
+	S2MPG10_COMMON_SPD_CTRL1 = 0x0a,
+	S2MPG10_COMMON_SPD_CTRL2,
+	S2MPG10_COMMON_SPD_CTRL3,
+	S2MPG10_COMMON_MON1SEL = 0x1a,
+	S2MPG10_COMMON_MON2SEL,
+	S2MPG10_COMMON_MONR,
+	S2MPG10_COMMON_DEBUG_CTRL1,
+	S2MPG10_COMMON_DEBUG_CTRL2,
+	S2MPG10_COMMON_DEBUG_CTRL3,
+	S2MPG10_COMMON_DEBUG_CTRL4,
+	S2MPG10_COMMON_DEBUG_CTRL5,
+	S2MPG10_COMMON_DEBUG_CTRL6,
+	S2MPG10_COMMON_DEBUG_CTRL7,
+	S2MPG10_COMMON_DEBUG_CTRL8,
+	S2MPG10_COMMON_TEST_MODE1,
+	S2MPG10_COMMON_TEST_MODE2,
+	S2MPG10_COMMON_SPD_DEBUG1,
+	S2MPG10_COMMON_SPD_DEBUG2,
+	S2MPG10_COMMON_SPD_DEBUG3,
+	S2MPG10_COMMON_SPD_DEBUG4,
+};
+
+/* for S2MPG10_COMMON_INT and S2MPG10_COMMON_INT_MASK */
+#define S2MPG10_COMMON_INT_SRC       GENMASK(7, 0)
+#define S2MPG10_COMMON_INT_SRC_PMIC  BIT(0)
+
+/* PMIC registers (type 0x100) */
+enum s2mpg10_pmic_reg {
+	S2MPG10_PMIC_INT1,
+	S2MPG10_PMIC_INT2,
+	S2MPG10_PMIC_INT3,
+	S2MPG10_PMIC_INT4,
+	S2MPG10_PMIC_INT5,
+	S2MPG10_PMIC_INT6,
+	S2MPG10_PMIC_INT1M,
+	S2MPG10_PMIC_INT2M,
+	S2MPG10_PMIC_INT3M,
+	S2MPG10_PMIC_INT4M,
+	S2MPG10_PMIC_INT5M,
+	S2MPG10_PMIC_INT6M,
+	S2MPG10_PMIC_STATUS1,
+	S2MPG10_PMIC_STATUS2,
+	S2MPG10_PMIC_PWRONSRC,
+	S2MPG10_PMIC_OFFSRC,
+	S2MPG10_PMIC_BU_CHG,
+	S2MPG10_PMIC_RTCBUF,
+	S2MPG10_PMIC_COMMON_CTRL1,
+	S2MPG10_PMIC_COMMON_CTRL2,
+	S2MPG10_PMIC_COMMON_CTRL3,
+	S2MPG10_PMIC_COMMON_CTRL4,
+	S2MPG10_PMIC_SMPL_WARN_CTRL,
+	S2MPG10_PMIC_MIMICKING_CTRL,
+	S2MPG10_PMIC_B1M_CTRL,
+	S2MPG10_PMIC_B1M_OUT1,
+	S2MPG10_PMIC_B1M_OUT2,
+	S2MPG10_PMIC_B2M_CTRL,
+	S2MPG10_PMIC_B2M_OUT1,
+	S2MPG10_PMIC_B2M_OUT2,
+	S2MPG10_PMIC_B3M_CTRL,
+	S2MPG10_PMIC_B3M_OUT1,
+	S2MPG10_PMIC_B3M_OUT2,
+	S2MPG10_PMIC_B4M_CTRL,
+	S2MPG10_PMIC_B4M_OUT1,
+	S2MPG10_PMIC_B4M_OUT2,
+	S2MPG10_PMIC_B5M_CTRL,
+	S2MPG10_PMIC_B5M_OUT1,
+	S2MPG10_PMIC_B5M_OUT2,
+	S2MPG10_PMIC_B6M_CTRL,
+	S2MPG10_PMIC_B6M_OUT1,
+	S2MPG10_PMIC_B6M_OUT2,
+	S2MPG10_PMIC_B7M_CTRL,
+	S2MPG10_PMIC_B7M_OUT1,
+	S2MPG10_PMIC_B7M_OUT2,
+	S2MPG10_PMIC_B8M_CTRL,
+	S2MPG10_PMIC_B8M_OUT1,
+	S2MPG10_PMIC_B8M_OUT2,
+	S2MPG10_PMIC_B9M_CTRL,
+	S2MPG10_PMIC_B9M_OUT1,
+	S2MPG10_PMIC_B9M_OUT2,
+	S2MPG10_PMIC_B10M_CTRL,
+	S2MPG10_PMIC_B10M_OUT1,
+	S2MPG10_PMIC_B10M_OUT2,
+	S2MPG10_PMIC_BUCK1M_USONIC,
+	S2MPG10_PMIC_BUCK2M_USONIC,
+	S2MPG10_PMIC_BUCK3M_USONIC,
+	S2MPG10_PMIC_BUCK4M_USONIC,
+	S2MPG10_PMIC_BUCK5M_USONIC,
+	S2MPG10_PMIC_BUCK6M_USONIC,
+	S2MPG10_PMIC_BUCK7M_USONIC,
+	S2MPG10_PMIC_BUCK8M_USONIC,
+	S2MPG10_PMIC_BUCK9M_USONIC,
+	S2MPG10_PMIC_BUCK10M_USONIC,
+	S2MPG10_PMIC_L1M_CTRL,
+	S2MPG10_PMIC_L2M_CTRL,
+	S2MPG10_PMIC_L3M_CTRL,
+	S2MPG10_PMIC_L4M_CTRL,
+	S2MPG10_PMIC_L5M_CTRL,
+	S2MPG10_PMIC_L6M_CTRL,
+	S2MPG10_PMIC_L7M_CTRL,
+	S2MPG10_PMIC_L8M_CTRL,
+	S2MPG10_PMIC_L9M_CTRL,
+	S2MPG10_PMIC_L10M_CTRL,
+	S2MPG10_PMIC_L11M_CTRL1,
+	S2MPG10_PMIC_L11M_CTRL2,
+	S2MPG10_PMIC_L12M_CTRL1,
+	S2MPG10_PMIC_L12M_CTRL2,
+	S2MPG10_PMIC_L13M_CTRL1,
+	S2MPG10_PMIC_L13M_CTRL2,
+	S2MPG10_PMIC_L14M_CTRL,
+	S2MPG10_PMIC_L15M_CTRL1,
+	S2MPG10_PMIC_L15M_CTRL2,
+	S2MPG10_PMIC_L16M_CTRL,
+	S2MPG10_PMIC_L17M_CTRL,
+	S2MPG10_PMIC_L18M_CTRL,
+	S2MPG10_PMIC_L19M_CTRL,
+	S2MPG10_PMIC_L20M_CTRL,
+	S2MPG10_PMIC_L21M_CTRL,
+	S2MPG10_PMIC_L22M_CTRL,
+	S2MPG10_PMIC_L23M_CTRL,
+	S2MPG10_PMIC_L24M_CTRL,
+	S2MPG10_PMIC_L25M_CTRL,
+	S2MPG10_PMIC_L26M_CTRL,
+	S2MPG10_PMIC_L27M_CTRL,
+	S2MPG10_PMIC_L28M_CTRL,
+	S2MPG10_PMIC_L29M_CTRL,
+	S2MPG10_PMIC_L30M_CTRL,
+	S2MPG10_PMIC_L31M_CTRL,
+	S2MPG10_PMIC_LDO_CTRL1,
+	S2MPG10_PMIC_LDO_CTRL2,
+	S2MPG10_PMIC_LDO_DSCH1,
+	S2MPG10_PMIC_LDO_DSCH2,
+	S2MPG10_PMIC_LDO_DSCH3,
+	S2MPG10_PMIC_LDO_DSCH4,
+	S2MPG10_PMIC_LDO_BUCK7M_HLIMIT,
+	S2MPG10_PMIC_LDO_BUCK7M_LLIMIT,
+	S2MPG10_PMIC_LDO_LDO21M_HLIMIT,
+	S2MPG10_PMIC_LDO_LDO21M_LLIMIT,
+	S2MPG10_PMIC_LDO_LDO11M_HLIMIT,
+	S2MPG10_PMIC_DVS_RAMP1,
+	S2MPG10_PMIC_DVS_RAMP2,
+	S2MPG10_PMIC_DVS_RAMP3,
+	S2MPG10_PMIC_DVS_RAMP4,
+	S2MPG10_PMIC_DVS_RAMP5,
+	S2MPG10_PMIC_DVS_RAMP6,
+	S2MPG10_PMIC_DVS_SYNC_CTRL1,
+	S2MPG10_PMIC_DVS_SYNC_CTRL2,
+	S2MPG10_PMIC_DVS_SYNC_CTRL3,
+	S2MPG10_PMIC_DVS_SYNC_CTRL4,
+	S2MPG10_PMIC_DVS_SYNC_CTRL5,
+	S2MPG10_PMIC_DVS_SYNC_CTRL6,
+	S2MPG10_PMIC_OFF_CTRL1,
+	S2MPG10_PMIC_OFF_CTRL2,
+	S2MPG10_PMIC_OFF_CTRL3,
+	S2MPG10_PMIC_OFF_CTRL4,
+	S2MPG10_PMIC_SEQ_CTRL1,
+	S2MPG10_PMIC_SEQ_CTRL2,
+	S2MPG10_PMIC_SEQ_CTRL3,
+	S2MPG10_PMIC_SEQ_CTRL4,
+	S2MPG10_PMIC_SEQ_CTRL5,
+	S2MPG10_PMIC_SEQ_CTRL6,
+	S2MPG10_PMIC_SEQ_CTRL7,
+	S2MPG10_PMIC_SEQ_CTRL8,
+	S2MPG10_PMIC_SEQ_CTRL9,
+	S2MPG10_PMIC_SEQ_CTRL10,
+	S2MPG10_PMIC_SEQ_CTRL11,
+	S2MPG10_PMIC_SEQ_CTRL12,
+	S2MPG10_PMIC_SEQ_CTRL13,
+	S2MPG10_PMIC_SEQ_CTRL14,
+	S2MPG10_PMIC_SEQ_CTRL15,
+	S2MPG10_PMIC_SEQ_CTRL16,
+	S2MPG10_PMIC_SEQ_CTRL17,
+	S2MPG10_PMIC_SEQ_CTRL18,
+	S2MPG10_PMIC_SEQ_CTRL19,
+	S2MPG10_PMIC_SEQ_CTRL20,
+	S2MPG10_PMIC_SEQ_CTRL21,
+	S2MPG10_PMIC_SEQ_CTRL22,
+	S2MPG10_PMIC_SEQ_CTRL23,
+	S2MPG10_PMIC_SEQ_CTRL24,
+	S2MPG10_PMIC_SEQ_CTRL25,
+	S2MPG10_PMIC_SEQ_CTRL26,
+	S2MPG10_PMIC_SEQ_CTRL27,
+	S2MPG10_PMIC_SEQ_CTRL28,
+	S2MPG10_PMIC_SEQ_CTRL29,
+	S2MPG10_PMIC_SEQ_CTRL30,
+	S2MPG10_PMIC_SEQ_CTRL31,
+	S2MPG10_PMIC_SEQ_CTRL32,
+	S2MPG10_PMIC_SEQ_CTRL33,
+	S2MPG10_PMIC_SEQ_CTRL34,
+	S2MPG10_PMIC_SEQ_CTRL35,
+	S2MPG10_PMIC_OFF_SEQ_CTRL1,
+	S2MPG10_PMIC_OFF_SEQ_CTRL2,
+	S2MPG10_PMIC_OFF_SEQ_CTRL3,
+	S2MPG10_PMIC_OFF_SEQ_CTRL4,
+	S2MPG10_PMIC_OFF_SEQ_CTRL5,
+	S2MPG10_PMIC_OFF_SEQ_CTRL6,
+	S2MPG10_PMIC_OFF_SEQ_CTRL7,
+	S2MPG10_PMIC_OFF_SEQ_CTRL8,
+	S2MPG10_PMIC_OFF_SEQ_CTRL9,
+	S2MPG10_PMIC_OFF_SEQ_CTRL10,
+	S2MPG10_PMIC_OFF_SEQ_CTRL11,
+	S2MPG10_PMIC_OFF_SEQ_CTRL12,
+	S2MPG10_PMIC_OFF_SEQ_CTRL13,
+	S2MPG10_PMIC_OFF_SEQ_CTRL14,
+	S2MPG10_PMIC_OFF_SEQ_CTRL15,
+	S2MPG10_PMIC_OFF_SEQ_CTRL16,
+	S2MPG10_PMIC_OFF_SEQ_CTRL17,
+	S2MPG10_PMIC_OFF_SEQ_CTRL18,
+	S2MPG10_PMIC_PCTRLSEL1,
+	S2MPG10_PMIC_PCTRLSEL2,
+	S2MPG10_PMIC_PCTRLSEL3,
+	S2MPG10_PMIC_PCTRLSEL4,
+	S2MPG10_PMIC_PCTRLSEL5,
+	S2MPG10_PMIC_PCTRLSEL6,
+	S2MPG10_PMIC_PCTRLSEL7,
+	S2MPG10_PMIC_PCTRLSEL8,
+	S2MPG10_PMIC_PCTRLSEL9,
+	S2MPG10_PMIC_PCTRLSEL10,
+	S2MPG10_PMIC_PCTRLSEL11,
+	S2MPG10_PMIC_PCTRLSEL12,
+	S2MPG10_PMIC_PCTRLSEL13,
+	S2MPG10_PMIC_DCTRLSEL1,
+	S2MPG10_PMIC_DCTRLSEL2,
+	S2MPG10_PMIC_DCTRLSEL3,
+	S2MPG10_PMIC_DCTRLSEL4,
+	S2MPG10_PMIC_DCTRLSEL5,
+	S2MPG10_PMIC_DCTRLSEL6,
+	S2MPG10_PMIC_DCTRLSEL7,
+	S2MPG10_PMIC_GPIO_CTRL1,
+	S2MPG10_PMIC_GPIO_CTRL2,
+	S2MPG10_PMIC_GPIO_CTRL3,
+	S2MPG10_PMIC_GPIO_CTRL4,
+	S2MPG10_PMIC_GPIO_CTRL5,
+	S2MPG10_PMIC_GPIO_CTRL6,
+	S2MPG10_PMIC_GPIO_CTRL7,
+	S2MPG10_PMIC_B2M_OCP_WARN,
+	S2MPG10_PMIC_B2M_OCP_WARN_X,
+	S2MPG10_PMIC_B2M_OCP_WARN_Y,
+	S2MPG10_PMIC_B2M_OCP_WARN_Z,
+	S2MPG10_PMIC_B3M_OCP_WARN,
+	S2MPG10_PMIC_B3M_OCP_WARN_X,
+	S2MPG10_PMIC_B3M_OCP_WARN_Y,
+	S2MPG10_PMIC_B3M_OCP_WARN_Z,
+	S2MPG10_PMIC_B10M_OCP_WARN,
+	S2MPG10_PMIC_B10M_OCP_WARN_X,
+	S2MPG10_PMIC_B10M_OCP_WARN_Y,
+	S2MPG10_PMIC_B10M_OCP_WARN_Z,
+	S2MPG10_PMIC_B2M_SOFT_OCP_WARN,
+	S2MPG10_PMIC_B2M_SOFT_OCP_WARN_X,
+	S2MPG10_PMIC_B2M_SOFT_OCP_WARN_Y,
+	S2MPG10_PMIC_B2M_SOFT_OCP_WARN_Z,
+	S2MPG10_PMIC_B3M_SOFT_OCP_WARN,
+	S2MPG10_PMIC_B3M_SOFT_OCP_WARN_X,
+	S2MPG10_PMIC_B3M_SOFT_OCP_WARN_Y,
+	S2MPG10_PMIC_B3M_SOFT_OCP_WARN_Z,
+	S2MPG10_PMIC_B10M_SOFT_OCP_WARN,
+	S2MPG10_PMIC_B10M_SOFT_OCP_WARN_X,
+	S2MPG10_PMIC_B10M_SOFT_OCP_WARN_Y,
+	S2MPG10_PMIC_B10M_SOFT_OCP_WARN_Z,
+	S2MPG10_PMIC_BUCK_OCP_EN1,
+	S2MPG10_PMIC_BUCK_OCP_EN2,
+	S2MPG10_PMIC_BUCK_OCP_PD_EN1,
+	S2MPG10_PMIC_BUCK_OCP_PD_EN2,
+	S2MPG10_PMIC_BUCK_OCP_CTRL1,
+	S2MPG10_PMIC_BUCK_OCP_CTRL2,
+	S2MPG10_PMIC_BUCK_OCP_CTRL3,
+	S2MPG10_PMIC_BUCK_OCP_CTRL4,
+	S2MPG10_PMIC_BUCK_OCP_CTRL5,
+	S2MPG10_PMIC_PIF_CTRL,
+	S2MPG10_PMIC_BUCK_HR_MODE1,
+	S2MPG10_PMIC_BUCK_HR_MODE2,
+	S2MPG10_PMIC_FAULTOUT_CTRL,
+	S2MPG10_PMIC_LDO_SENSE1,
+	S2MPG10_PMIC_LDO_SENSE2,
+	S2MPG10_PMIC_LDO_SENSE3,
+	S2MPG10_PMIC_LDO_SENSE4,
+};
+
+/* Meter registers (type 0xa00) */
+enum s2mpg10_meter_reg {
+	S2MPG10_METER_CTRL1,
+	S2MPG10_METER_CTRL2,
+	S2MPG10_METER_CTRL3,
+	S2MPG10_METER_CTRL4,
+	S2MPG10_METER_BUCKEN1,
+	S2MPG10_METER_BUCKEN2,
+	S2MPG10_METER_MUXSEL0,
+	S2MPG10_METER_MUXSEL1,
+	S2MPG10_METER_MUXSEL2,
+	S2MPG10_METER_MUXSEL3,
+	S2MPG10_METER_MUXSEL4,
+	S2MPG10_METER_MUXSEL5,
+	S2MPG10_METER_MUXSEL6,
+	S2MPG10_METER_MUXSEL7,
+	S2MPG10_METER_LPF_C0_0,
+	S2MPG10_METER_LPF_C0_1,
+	S2MPG10_METER_LPF_C0_2,
+	S2MPG10_METER_LPF_C0_3,
+	S2MPG10_METER_LPF_C0_4,
+	S2MPG10_METER_LPF_C0_5,
+	S2MPG10_METER_LPF_C0_6,
+	S2MPG10_METER_LPF_C0_7,
+	S2MPG10_METER_PWR_WARN0,
+	S2MPG10_METER_PWR_WARN1,
+	S2MPG10_METER_PWR_WARN2,
+	S2MPG10_METER_PWR_WARN3,
+	S2MPG10_METER_PWR_WARN4,
+	S2MPG10_METER_PWR_WARN5,
+	S2MPG10_METER_PWR_WARN6,
+	S2MPG10_METER_PWR_WARN7,
+	S2MPG10_METER_PWR_HYS1,
+	S2MPG10_METER_PWR_HYS2,
+	S2MPG10_METER_PWR_HYS3,
+	S2MPG10_METER_PWR_HYS4,
+	S2MPG10_METER_ACC_DATA_CH0_1 = 0x40,
+	S2MPG10_METER_ACC_DATA_CH0_2,
+	S2MPG10_METER_ACC_DATA_CH0_3,
+	S2MPG10_METER_ACC_DATA_CH0_4,
+	S2MPG10_METER_ACC_DATA_CH0_5,
+	S2MPG10_METER_ACC_DATA_CH0_6,
+	S2MPG10_METER_ACC_DATA_CH1_1,
+	S2MPG10_METER_ACC_DATA_CH1_2,
+	S2MPG10_METER_ACC_DATA_CH1_3,
+	S2MPG10_METER_ACC_DATA_CH1_4,
+	S2MPG10_METER_ACC_DATA_CH1_5,
+	S2MPG10_METER_ACC_DATA_CH1_6,
+	S2MPG10_METER_ACC_DATA_CH2_1,
+	S2MPG10_METER_ACC_DATA_CH2_2,
+	S2MPG10_METER_ACC_DATA_CH2_3,
+	S2MPG10_METER_ACC_DATA_CH2_4,
+	S2MPG10_METER_ACC_DATA_CH2_5,
+	S2MPG10_METER_ACC_DATA_CH2_6,
+	S2MPG10_METER_ACC_DATA_CH3_1,
+	S2MPG10_METER_ACC_DATA_CH3_2,
+	S2MPG10_METER_ACC_DATA_CH3_3,
+	S2MPG10_METER_ACC_DATA_CH3_4,
+	S2MPG10_METER_ACC_DATA_CH3_5,
+	S2MPG10_METER_ACC_DATA_CH3_6,
+	S2MPG10_METER_ACC_DATA_CH4_1,
+	S2MPG10_METER_ACC_DATA_CH4_2,
+	S2MPG10_METER_ACC_DATA_CH4_3,
+	S2MPG10_METER_ACC_DATA_CH4_4,
+	S2MPG10_METER_ACC_DATA_CH4_5,
+	S2MPG10_METER_ACC_DATA_CH4_6,
+	S2MPG10_METER_ACC_DATA_CH5_1,
+	S2MPG10_METER_ACC_DATA_CH5_2,
+	S2MPG10_METER_ACC_DATA_CH5_3,
+	S2MPG10_METER_ACC_DATA_CH5_4,
+	S2MPG10_METER_ACC_DATA_CH5_5,
+	S2MPG10_METER_ACC_DATA_CH5_6,
+	S2MPG10_METER_ACC_DATA_CH6_1,
+	S2MPG10_METER_ACC_DATA_CH6_2,
+	S2MPG10_METER_ACC_DATA_CH6_3,
+	S2MPG10_METER_ACC_DATA_CH6_4,
+	S2MPG10_METER_ACC_DATA_CH6_5,
+	S2MPG10_METER_ACC_DATA_CH6_6,
+	S2MPG10_METER_ACC_DATA_CH7_1,
+	S2MPG10_METER_ACC_DATA_CH7_2,
+	S2MPG10_METER_ACC_DATA_CH7_3,
+	S2MPG10_METER_ACC_DATA_CH7_4,
+	S2MPG10_METER_ACC_DATA_CH7_5,
+	S2MPG10_METER_ACC_DATA_CH7_6,
+	S2MPG10_METER_ACC_COUNT_1,
+	S2MPG10_METER_ACC_COUNT_2,
+	S2MPG10_METER_ACC_COUNT_3,
+	S2MPG10_METER_LPF_DATA_CH0_1,
+	S2MPG10_METER_LPF_DATA_CH0_2,
+	S2MPG10_METER_LPF_DATA_CH0_3,
+	S2MPG10_METER_LPF_DATA_CH1_1,
+	S2MPG10_METER_LPF_DATA_CH1_2,
+	S2MPG10_METER_LPF_DATA_CH1_3,
+	S2MPG10_METER_LPF_DATA_CH2_1,
+	S2MPG10_METER_LPF_DATA_CH2_2,
+	S2MPG10_METER_LPF_DATA_CH2_3,
+	S2MPG10_METER_LPF_DATA_CH3_1,
+	S2MPG10_METER_LPF_DATA_CH3_2,
+	S2MPG10_METER_LPF_DATA_CH3_3,
+	S2MPG10_METER_LPF_DATA_CH4_1,
+	S2MPG10_METER_LPF_DATA_CH4_2,
+	S2MPG10_METER_LPF_DATA_CH4_3,
+	S2MPG10_METER_LPF_DATA_CH5_1,
+	S2MPG10_METER_LPF_DATA_CH5_2,
+	S2MPG10_METER_LPF_DATA_CH5_3,
+	S2MPG10_METER_LPF_DATA_CH6_1,
+	S2MPG10_METER_LPF_DATA_CH6_2,
+	S2MPG10_METER_LPF_DATA_CH6_3,
+	S2MPG10_METER_LPF_DATA_CH7_1,
+	S2MPG10_METER_LPF_DATA_CH7_2,
+	S2MPG10_METER_LPF_DATA_CH7_3,
+	S2MPG10_METER_DSM_TRIM_OFFSET = 0xee,
+	S2MPG10_METER_BUCK_METER_TRIM3 = 0xf1,
+};
+
+/* S2MPG10 regulator IDs */
+enum s2mpg10_regulators {
+	S2MPG10_LDO1,
+	S2MPG10_LDO2,
+	S2MPG10_LDO3,
+	S2MPG10_LDO4,
+	S2MPG10_LDO5,
+	S2MPG10_LDO6,
+	S2MPG10_LDO7,
+	S2MPG10_LDO8,
+	S2MPG10_LDO9,
+	S2MPG10_LDO10,
+	S2MPG10_LDO11,
+	S2MPG10_LDO12,
+	S2MPG10_LDO13,
+	S2MPG10_LDO14,
+	S2MPG10_LDO15,
+	S2MPG10_LDO16,
+	S2MPG10_LDO17,
+	S2MPG10_LDO18,
+	S2MPG10_LDO19,
+	S2MPG10_LDO20,
+	S2MPG10_LDO21,
+	S2MPG10_LDO22,
+	S2MPG10_LDO23,
+	S2MPG10_LDO24,
+	S2MPG10_LDO25,
+	S2MPG10_LDO26,
+	S2MPG10_LDO27,
+	S2MPG10_LDO28,
+	S2MPG10_LDO29,
+	S2MPG10_LDO30,
+	S2MPG10_LDO31,
+	S2MPG10_BUCK1,
+	S2MPG10_BUCK2,
+	S2MPG10_BUCK3,
+	S2MPG10_BUCK4,
+	S2MPG10_BUCK5,
+	S2MPG10_BUCK6,
+	S2MPG10_BUCK7,
+	S2MPG10_BUCK8,
+	S2MPG10_BUCK9,
+	S2MPG10_BUCK10,
+	S2MPG10_REGULATOR_MAX,
+};
+
+#endif /* __LINUX_MFD_S2MPG10_H */

-- 
2.49.0.472.ge94155a9ec-goog

[PATCH v2 10/32] mfd: sec: merge separate core and irq modules

[André Draszik]

There is no reason to have these two kernel modules separate. Having
them merged into one kernel module also slightly reduces memory
consumption and module load times a little.

mapped size (lsmod):
         before:             after:
    sec_core   20480    sec_core   24576
    sec_irq    16384
    ----------------
    total      36864

Section sizes (size -A):
         before:             after:
    sec_core    6780    sec_core   13239
    sec_irq     8046
    ----------------
    Total      14826

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
---
Checkpatch suggests to update MAINTAINERS, but the new file is covered
already due to using a wildcard.
---
 drivers/mfd/Makefile                     | 3 ++-
 drivers/mfd/{sec-core.c => sec-common.c} | 2 ++
 drivers/mfd/sec-irq.c                    | 9 ---------
 3 files changed, 4 insertions(+), 10 deletions(-)

diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index b617782eca436e34084a9cd24c309801c5680390..8f315298b32a2a9ee114ed5e49e760bd8f930aee 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -228,7 +228,8 @@ obj-$(CONFIG_MFD_RK8XX)		+= rk8xx-core.o
 obj-$(CONFIG_MFD_RK8XX_I2C)	+= rk8xx-i2c.o
 obj-$(CONFIG_MFD_RK8XX_SPI)	+= rk8xx-spi.o
 obj-$(CONFIG_MFD_RN5T618)	+= rn5t618.o
-obj-$(CONFIG_MFD_SEC_CORE)	+= sec-core.o sec-irq.o
+sec-core-objs			:= sec-common.o sec-irq.o
+obj-$(CONFIG_MFD_SEC_CORE)	+= sec-core.o
 obj-$(CONFIG_MFD_SEC_ACPM)	+= sec-acpm.o
 obj-$(CONFIG_MFD_SEC_I2C)	+= sec-i2c.o
 obj-$(CONFIG_MFD_SYSCON)	+= syscon.o
diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-common.c
similarity index 98%
rename from drivers/mfd/sec-core.c
rename to drivers/mfd/sec-common.c
index c4b7abe511090d8f5ff2eb501f325cc8173b9bf5..782dec1956a5fd7bf0dbb2159f9d222ad3fea942 100644
--- a/drivers/mfd/sec-core.c
+++ b/drivers/mfd/sec-common.c
@@ -307,6 +307,8 @@ static int sec_pmic_resume(struct device *dev)
 DEFINE_SIMPLE_DEV_PM_OPS(sec_pmic_pm_ops, sec_pmic_suspend, sec_pmic_resume);
 EXPORT_SYMBOL_GPL(sec_pmic_pm_ops);
 
+MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>");
+MODULE_AUTHOR("Krzysztof Kozlowski <krzk@kernel.org>");
 MODULE_AUTHOR("Sangbeom Kim <sbkim73@samsung.com>");
 MODULE_DESCRIPTION("Core driver for the Samsung S5M");
 MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/sec-irq.c b/drivers/mfd/sec-irq.c
index bf86281401ac6ff05c90c2d71c84744709ed79cb..aa467e488fb5ef79d5bc7110e1ba7c26fcfa9892 100644
--- a/drivers/mfd/sec-irq.c
+++ b/drivers/mfd/sec-irq.c
@@ -6,7 +6,6 @@
 #include <linux/array_size.h>
 #include <linux/build_bug.h>
 #include <linux/dev_printk.h>
-#include <linux/export.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/mfd/samsung/core.h>
@@ -17,7 +16,6 @@
 #include <linux/mfd/samsung/s2mpu02.h>
 #include <linux/mfd/samsung/s2mpu05.h>
 #include <linux/mfd/samsung/s5m8767.h>
-#include <linux/module.h>
 #include <linux/regmap.h>
 #include "sec-core.h"
 
@@ -510,10 +508,3 @@ int sec_irq_init(struct sec_pmic_dev *sec_pmic)
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(sec_irq_init);
-
-MODULE_AUTHOR("Sangbeom Kim <sbkim73@samsung.com>");
-MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>");
-MODULE_AUTHOR("Krzysztof Kozlowski <krzk@kernel.org>");
-MODULE_DESCRIPTION("Interrupt support for the S5M MFD");
-MODULE_LICENSE("GPL");

-- 
2.49.0.472.ge94155a9ec-goog

[PATCH v2 11/32] mfd: sec: fix open parenthesis alignment (multiple)

[André Draszik]

checkpatch complains about unexpected alignment issues in this file -
update the code accordingly.

Signed-off-by: André Draszik <andre.draszik@linaro.org>

---
v2:
* make new alignment more readable (Krzysztof)
---
 drivers/mfd/sec-common.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/mfd/sec-common.c b/drivers/mfd/sec-common.c
index 782dec1956a5fd7bf0dbb2159f9d222ad3fea942..1a6f14dda825adeaeee1a677459c7399c144d553 100644
--- a/drivers/mfd/sec-common.c
+++ b/drivers/mfd/sec-common.c
@@ -149,9 +149,9 @@ sec_pmic_parse_dt_pdata(struct device *dev)
 		return ERR_PTR(-ENOMEM);
 
 	pd->manual_poweroff = of_property_read_bool(dev->of_node,
-						"samsung,s2mps11-acokb-ground");
+						    "samsung,s2mps11-acokb-ground");
 	pd->disable_wrstbi = of_property_read_bool(dev->of_node,
-						"samsung,s2mps11-wrstbi-ground");
+						   "samsung,s2mps11-wrstbi-ground");
 	return pd;
 }
 
@@ -264,8 +264,8 @@ void sec_pmic_shutdown(struct device *dev)
 		 * ignore the rest.
 		 */
 		dev_warn(sec_pmic->dev,
-			"Unsupported device %lu for manual power off\n",
-			sec_pmic->device_type);
+			 "Unsupported device %lu for manual power off\n",
+			 sec_pmic->device_type);
 		return;
 	}
 

-- 
2.49.0.472.ge94155a9ec-goog

[PATCH v2 12/32] mfd: sec: sort struct of_device_id entries and the device type switch

[André Draszik]

Sort struct of_device_id entries and the device type switch in _probe()
alphabetically, which makes it easier to find the right place where to
insert new entries in the future.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
---
 drivers/mfd/sec-i2c.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/mfd/sec-i2c.c b/drivers/mfd/sec-i2c.c
index 8e3a365ff3e5533e27d94fa8a15dbfa639518a5f..966d116dd781ac6ab63453f641b2a68bba3945a9 100644
--- a/drivers/mfd/sec-i2c.c
+++ b/drivers/mfd/sec-i2c.c
@@ -154,12 +154,12 @@ static int sec_pmic_i2c_probe(struct i2c_client *client)
 	case S2MPS15X:
 		regmap = &s2mps15_regmap_config;
 		break;
-	case S5M8767X:
-		regmap = &s5m8767_regmap_config;
-		break;
 	case S2MPU02:
 		regmap = &s2mpu02_regmap_config;
 		break;
+	case S5M8767X:
+		regmap = &s5m8767_regmap_config;
+		break;
 	default:
 		regmap = &sec_regmap_config;
 		break;
@@ -184,11 +184,11 @@ static void sec_pmic_i2c_shutdown(struct i2c_client *i2c)
 
 static const struct of_device_id sec_pmic_i2c_of_match[] = {
 	{
-		.compatible = "samsung,s5m8767-pmic",
-		.data = (void *)S5M8767X,
-	}, {
 		.compatible = "samsung,s2dos05",
 		.data = (void *)S2DOS05,
+	}, {
+		.compatible = "samsung,s2mpa01-pmic",
+		.data = (void *)S2MPA01,
 	}, {
 		.compatible = "samsung,s2mps11-pmic",
 		.data = (void *)S2MPS11X,
@@ -201,15 +201,15 @@ static const struct of_device_id sec_pmic_i2c_of_match[] = {
 	}, {
 		.compatible = "samsung,s2mps15-pmic",
 		.data = (void *)S2MPS15X,
-	}, {
-		.compatible = "samsung,s2mpa01-pmic",
-		.data = (void *)S2MPA01,
 	}, {
 		.compatible = "samsung,s2mpu02-pmic",
 		.data = (void *)S2MPU02,
 	}, {
 		.compatible = "samsung,s2mpu05-pmic",
 		.data = (void *)S2MPU05,
+	}, {
+		.compatible = "samsung,s5m8767-pmic",
+		.data = (void *)S5M8767X,
 	},
 	{ },
 };

-- 
2.49.0.472.ge94155a9ec-goog

[PATCH v2 13/32] mfd: sec: use dev_err_probe() where appropriate

[André Draszik]

dev_err_probe() exists to simplify code and harmonise error messages,
there's no reason not to use it here.

While at it, harmonise some error messages.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
---
 drivers/mfd/sec-common.c |  6 +++---
 drivers/mfd/sec-i2c.c    | 10 +++-------
 drivers/mfd/sec-irq.c    | 14 +++++++-------
 3 files changed, 13 insertions(+), 17 deletions(-)

diff --git a/drivers/mfd/sec-common.c b/drivers/mfd/sec-common.c
index 1a6f14dda825adeaeee1a677459c7399c144d553..f4c606c5ee5a809a106b13e947464f35a926b199 100644
--- a/drivers/mfd/sec-common.c
+++ b/drivers/mfd/sec-common.c
@@ -229,9 +229,9 @@ int sec_pmic_probe(struct device *dev, unsigned long device_type,
 		num_sec_devs = ARRAY_SIZE(s2mpu05_devs);
 		break;
 	default:
-		dev_err(sec_pmic->dev, "Unsupported device type %lu\n",
-			sec_pmic->device_type);
-		return -EINVAL;
+		return dev_err_probe(sec_pmic->dev, -EINVAL,
+				     "Unsupported device type %lu\n",
+				     sec_pmic->device_type);
 	}
 	ret = devm_mfd_add_devices(sec_pmic->dev, -1, sec_devs, num_sec_devs,
 				   NULL, 0, NULL);
diff --git a/drivers/mfd/sec-i2c.c b/drivers/mfd/sec-i2c.c
index 966d116dd781ac6ab63453f641b2a68bba3945a9..a107a9c1e760f90fcb59a9944b74e9a39a0d946c 100644
--- a/drivers/mfd/sec-i2c.c
+++ b/drivers/mfd/sec-i2c.c
@@ -134,7 +134,6 @@ static int sec_pmic_i2c_probe(struct i2c_client *client)
 	const struct regmap_config *regmap;
 	unsigned long device_type;
 	struct regmap *regmap_pmic;
-	int ret;
 
 	device_type = (unsigned long)of_device_get_match_data(&client->dev);
 
@@ -166,12 +165,9 @@ static int sec_pmic_i2c_probe(struct i2c_client *client)
 	}
 
 	regmap_pmic = devm_regmap_init_i2c(client, regmap);
-	if (IS_ERR(regmap_pmic)) {
-		ret = PTR_ERR(regmap_pmic);
-		dev_err(&client->dev, "Failed to allocate register map: %d\n",
-			ret);
-		return ret;
-	}
+	if (IS_ERR(regmap_pmic))
+		return dev_err_probe(&client->dev, PTR_ERR(regmap_pmic),
+				     "regmap init failed\n");
 
 	return sec_pmic_probe(&client->dev, device_type, client->irq,
 			      regmap_pmic, client);
diff --git a/drivers/mfd/sec-irq.c b/drivers/mfd/sec-irq.c
index aa467e488fb5ef79d5bc7110e1ba7c26fcfa9892..9f0173c48b0c8186a2cdc1d2179db081ef2e09c4 100644
--- a/drivers/mfd/sec-irq.c
+++ b/drivers/mfd/sec-irq.c
@@ -487,18 +487,18 @@ int sec_irq_init(struct sec_pmic_dev *sec_pmic)
 		sec_irq_chip = &s2mpu05_irq_chip;
 		break;
 	default:
-		dev_err(sec_pmic->dev, "Unknown device type %lu\n",
-			sec_pmic->device_type);
-		return -EINVAL;
+		return dev_err_probe(sec_pmic->dev, -EINVAL,
+				     "Unsupported device type %lu\n",
+				     sec_pmic->device_type);
 	}
 
 	ret = devm_regmap_add_irq_chip(sec_pmic->dev, sec_pmic->regmap_pmic,
 				       sec_pmic->irq, IRQF_ONESHOT,
 				       0, sec_irq_chip, &sec_pmic->irq_data);
-	if (ret != 0) {
-		dev_err(sec_pmic->dev, "Failed to register IRQ chip: %d\n", ret);
-		return ret;
-	}
+	if (ret != 0)
+		return dev_err_probe(sec_pmic->dev, ret,
+				     "Failed to add %s IRQ chip\n",
+				     sec_irq_chip->name);
 
 	/*
 	 * The rtc-s5m driver requests S2MPS14_IRQ_RTCA0 also for S2MPS11

-- 
2.49.0.472.ge94155a9ec-goog

[PATCH v2 14/32] mfd: sec: s2dos05/s2mpu05: use explicit regmap config and drop default

[André Draszik]

When support for PMICs without compatibles was removed in
commit f736d2c0caa8 ("mfd: sec: Remove PMICs without compatibles"),
sec_regmap_config effectively became an orphan, because S5M8763X was
the only user left of it before removal, using the default: case of the
switch statement.

When s2dos05 and s2mpu05 support was added in commit bf231e5febcf
("mfd: sec-core: Add support for the Samsung s2dos05") and commit
ed33479b7beb ("mfd: sec: Add support for S2MPU05 PMIC"), they ended up
using that orphaned regmap_config in a non-obvious way due to the
default: case of the device type switch matching statement taking
effect again.

To make things more obvious, and to help the reader of this code while
reasoning about what the intention might be here, and to ensure future
additions to support new devices in this driver don't forget to add a
regmap config, add an explicit regmap config for these two devices, and
completely remove the generic regmap config as it becomes an orphan
again that shouldn't be used by any device.

Note that this commit doesn't fix the issue that s2dos05_regmap_config
ands2mpu05_regmap_config really are incomplete, but I have no
documentation on them.

Signed-off-by: André Draszik <andre.draszik@linaro.org>

---
v2:
* squash two previously separate patches into this one (Krzysztof)
---
 drivers/mfd/sec-i2c.c | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)

diff --git a/drivers/mfd/sec-i2c.c b/drivers/mfd/sec-i2c.c
index a107a9c1e760f90fcb59a9944b74e9a39a0d946c..81f90003eea2a40f2caaebb49fc9494b89370e7f 100644
--- a/drivers/mfd/sec-i2c.c
+++ b/drivers/mfd/sec-i2c.c
@@ -61,7 +61,7 @@ static bool s2mpu02_volatile(struct device *dev, unsigned int reg)
 	}
 }
 
-static const struct regmap_config sec_regmap_config = {
+static const struct regmap_config s2dos05_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
 };
@@ -120,6 +120,11 @@ static const struct regmap_config s2mpu02_regmap_config = {
 	.cache_type = REGCACHE_FLAT,
 };
 
+static const struct regmap_config s2mpu05_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
 static const struct regmap_config s5m8767_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
@@ -138,6 +143,9 @@ static int sec_pmic_i2c_probe(struct i2c_client *client)
 	device_type = (unsigned long)of_device_get_match_data(&client->dev);
 
 	switch (device_type) {
+	case S2DOS05:
+		regmap = &s2dos05_regmap_config;
+		break;
 	case S2MPA01:
 		regmap = &s2mpa01_regmap_config;
 		break;
@@ -156,12 +164,16 @@ static int sec_pmic_i2c_probe(struct i2c_client *client)
 	case S2MPU02:
 		regmap = &s2mpu02_regmap_config;
 		break;
+	case S2MPU05:
+		regmap = &s2mpu05_regmap_config;
+		break;
 	case S5M8767X:
 		regmap = &s5m8767_regmap_config;
 		break;
 	default:
-		regmap = &sec_regmap_config;
-		break;
+		return dev_err_probe(&client->dev, -ENODEV,
+				     "Unsupported device type %lu\n",
+				     device_type);
 	}
 
 	regmap_pmic = devm_regmap_init_i2c(client, regmap);

-- 
2.49.0.472.ge94155a9ec-goog

[PATCH v2 15/32] mfd: sec: s2dos05: doesn't support interrupts (it seems)

[André Draszik]

The commit bf231e5febcf ("mfd: sec-core: Add support for the Samsung
s2dos05") adding s2dos05 support didn't add anything related to IRQ
support, so I assume this works without IRQs.

Rather than printing a warning message in sec_irq_init() due to the
missing IRQ number, or returning an error due to a missing irq chip
regmap, just return early explicitly.

This will become particularly important once errors from sec_irq_init()
aren't ignored anymore in an upcoming patch and helps the reader of
this code while reasoning about what the intention might be here.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
---
 drivers/mfd/sec-irq.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/mfd/sec-irq.c b/drivers/mfd/sec-irq.c
index 9f0173c48b0c8186a2cdc1d2179db081ef2e09c4..79a3b33441fa5ab48b4b233eb8d89b4c20c142ed 100644
--- a/drivers/mfd/sec-irq.c
+++ b/drivers/mfd/sec-irq.c
@@ -452,16 +452,12 @@ int sec_irq_init(struct sec_pmic_dev *sec_pmic)
 	int type = sec_pmic->device_type;
 	const struct regmap_irq_chip *sec_irq_chip;
 
-	if (!sec_pmic->irq) {
-		dev_warn(sec_pmic->dev,
-			 "No interrupt specified, no interrupts\n");
-		return 0;
-	}
-
 	switch (type) {
 	case S5M8767X:
 		sec_irq_chip = &s5m8767_irq_chip;
 		break;
+	case S2DOS05:
+		return 0;
 	case S2MPA01:
 		sec_irq_chip = &s2mps14_irq_chip;
 		break;
@@ -492,6 +488,12 @@ int sec_irq_init(struct sec_pmic_dev *sec_pmic)
 				     sec_pmic->device_type);
 	}
 
+	if (!sec_pmic->irq) {
+		dev_warn(sec_pmic->dev,
+			 "No interrupt specified, no interrupts\n");
+		return 0;
+	}
+
 	ret = devm_regmap_add_irq_chip(sec_pmic->dev, sec_pmic->regmap_pmic,
 				       sec_pmic->irq, IRQF_ONESHOT,
 				       0, sec_irq_chip, &sec_pmic->irq_data);

-- 
2.49.0.472.ge94155a9ec-goog

[PATCH v2 16/32] mfd: sec: don't ignore errors from sec_irq_init()

[André Draszik]

sec_irq_init() can fail, we shouldn't continue and ignore the error in
that case, but actually error out.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
---
 drivers/mfd/sec-common.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/mfd/sec-common.c b/drivers/mfd/sec-common.c
index f4c606c5ee5a809a106b13e947464f35a926b199..bb0eb3c2d9a260ddf2fb110cc255f08a0d25230d 100644
--- a/drivers/mfd/sec-common.c
+++ b/drivers/mfd/sec-common.c
@@ -183,7 +183,9 @@ int sec_pmic_probe(struct device *dev, unsigned long device_type,
 
 	sec_pmic->pdata = pdata;
 
-	sec_irq_init(sec_pmic);
+	ret = sec_irq_init(sec_pmic);
+	if (ret)
+		return ret;
 
 	pm_runtime_set_active(sec_pmic->dev);
 

-- 
2.49.0.472.ge94155a9ec-goog

[PATCH v2 17/32] mfd: sec: rework platform data and regmap instantiating

[André Draszik]

Instead of a large open-coded switch statement, just add both regmap
config and device type to the OF match data. This allows us to have all
related information in one place, and avoids a long switch() statement.

Signed-off-by: André Draszik <andre.draszik@linaro.org>

---
v2: fix typo in platform data for "samsung,s2mps14-pmic"
---
 drivers/mfd/sec-i2c.c | 133 +++++++++++++++++++++++++-------------------------
 1 file changed, 66 insertions(+), 67 deletions(-)

diff --git a/drivers/mfd/sec-i2c.c b/drivers/mfd/sec-i2c.c
index 81f90003eea2a40f2caaebb49fc9494b89370e7f..41b09f5e3c49f410604a5d47e625cbb37d7f5fa2 100644
--- a/drivers/mfd/sec-i2c.c
+++ b/drivers/mfd/sec-i2c.c
@@ -20,11 +20,16 @@
 #include <linux/mfd/samsung/s5m8767.h>
 #include <linux/mod_devicetable.h>
 #include <linux/module.h>
-#include <linux/of.h>
 #include <linux/pm.h>
+#include <linux/property.h>
 #include <linux/regmap.h>
 #include "sec-core.h"
 
+struct sec_pmic_i2c_platform_data {
+	const struct regmap_config *regmap_cfg;
+	unsigned long device_type;
+};
+
 static bool s2mpa01_volatile(struct device *dev, unsigned int reg)
 {
 	switch (reg) {
@@ -136,52 +141,20 @@ static const struct regmap_config s5m8767_regmap_config = {
 
 static int sec_pmic_i2c_probe(struct i2c_client *client)
 {
-	const struct regmap_config *regmap;
-	unsigned long device_type;
+	const struct sec_pmic_i2c_platform_data *pdata;
 	struct regmap *regmap_pmic;
 
-	device_type = (unsigned long)of_device_get_match_data(&client->dev);
-
-	switch (device_type) {
-	case S2DOS05:
-		regmap = &s2dos05_regmap_config;
-		break;
-	case S2MPA01:
-		regmap = &s2mpa01_regmap_config;
-		break;
-	case S2MPS11X:
-		regmap = &s2mps11_regmap_config;
-		break;
-	case S2MPS13X:
-		regmap = &s2mps13_regmap_config;
-		break;
-	case S2MPS14X:
-		regmap = &s2mps14_regmap_config;
-		break;
-	case S2MPS15X:
-		regmap = &s2mps15_regmap_config;
-		break;
-	case S2MPU02:
-		regmap = &s2mpu02_regmap_config;
-		break;
-	case S2MPU05:
-		regmap = &s2mpu05_regmap_config;
-		break;
-	case S5M8767X:
-		regmap = &s5m8767_regmap_config;
-		break;
-	default:
+	pdata = device_get_match_data(&client->dev);
+	if (!pdata)
 		return dev_err_probe(&client->dev, -ENODEV,
-				     "Unsupported device type %lu\n",
-				     device_type);
-	}
+				     "Unsupported device type\n");
 
-	regmap_pmic = devm_regmap_init_i2c(client, regmap);
+	regmap_pmic = devm_regmap_init_i2c(client, pdata->regmap_cfg);
 	if (IS_ERR(regmap_pmic))
 		return dev_err_probe(&client->dev, PTR_ERR(regmap_pmic),
 				     "regmap init failed\n");
 
-	return sec_pmic_probe(&client->dev, device_type, client->irq,
+	return sec_pmic_probe(&client->dev, pdata->device_type, client->irq,
 			      regmap_pmic, client);
 }
 
@@ -190,35 +163,61 @@ static void sec_pmic_i2c_shutdown(struct i2c_client *i2c)
 	sec_pmic_shutdown(&i2c->dev);
 }
 
+static const struct sec_pmic_i2c_platform_data s2dos05_data = {
+	.regmap_cfg = &s2dos05_regmap_config,
+	.device_type = S2DOS05
+};
+
+static const struct sec_pmic_i2c_platform_data s2mpa01_data = {
+	.regmap_cfg = &s2mpa01_regmap_config,
+	.device_type = S2MPA01,
+};
+
+static const struct sec_pmic_i2c_platform_data s2mps11_data = {
+	.regmap_cfg = &s2mps11_regmap_config,
+	.device_type = S2MPS11X,
+};
+
+static const struct sec_pmic_i2c_platform_data s2mps13_data = {
+	.regmap_cfg = &s2mps13_regmap_config,
+	.device_type = S2MPS13X,
+};
+
+static const struct sec_pmic_i2c_platform_data s2mps14_data = {
+	.regmap_cfg = &s2mps14_regmap_config,
+	.device_type = S2MPS14X,
+};
+
+static const struct sec_pmic_i2c_platform_data s2mps15_data = {
+	.regmap_cfg = &s2mps15_regmap_config,
+	.device_type = S2MPS15X,
+};
+
+static const struct sec_pmic_i2c_platform_data s2mpu02_data = {
+	.regmap_cfg = &s2mpu02_regmap_config,
+	.device_type = S2MPU02,
+};
+
+static const struct sec_pmic_i2c_platform_data s2mpu05_data = {
+	.regmap_cfg = &s2mpu05_regmap_config,
+	.device_type = S2MPU05,
+};
+
+static const struct sec_pmic_i2c_platform_data s5m8767_data = {
+	.regmap_cfg = &s5m8767_regmap_config,
+	.device_type = S5M8767X,
+};
+
 static const struct of_device_id sec_pmic_i2c_of_match[] = {
-	{
-		.compatible = "samsung,s2dos05",
-		.data = (void *)S2DOS05,
-	}, {
-		.compatible = "samsung,s2mpa01-pmic",
-		.data = (void *)S2MPA01,
-	}, {
-		.compatible = "samsung,s2mps11-pmic",
-		.data = (void *)S2MPS11X,
-	}, {
-		.compatible = "samsung,s2mps13-pmic",
-		.data = (void *)S2MPS13X,
-	}, {
-		.compatible = "samsung,s2mps14-pmic",
-		.data = (void *)S2MPS14X,
-	}, {
-		.compatible = "samsung,s2mps15-pmic",
-		.data = (void *)S2MPS15X,
-	}, {
-		.compatible = "samsung,s2mpu02-pmic",
-		.data = (void *)S2MPU02,
-	}, {
-		.compatible = "samsung,s2mpu05-pmic",
-		.data = (void *)S2MPU05,
-	}, {
-		.compatible = "samsung,s5m8767-pmic",
-		.data = (void *)S5M8767X,
-	},
+	{ .compatible = "samsung,s2dos05", .data = &s2dos05_data, },
+	{ .compatible = "samsung,s2mpa01-pmic", .data = &s2mpa01_data, },
+	{ .compatible = "samsung,s2mps11-pmic", .data = &s2mps11_data, },
+	{ .compatible = "samsung,s2mps13-pmic", .data = &s2mps13_data, },
+	{ .compatible = "samsung,s2mps14-pmic", .data = &s2mps14_data, },
+	{ .compatible = "samsung,s2mps15-pmic", .data = &s2mps15_data, },
+	{ .compatible = "samsung,s2mpu02-pmic", .data = &s2mpu02_data, },
+	{ .compatible = "samsung,s2mpu05-pmic", .data = &s2mpu05_data, },
+	{ .compatible = "samsung,s5m8767-pmic", .data = &s5m8767_data, },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, sec_pmic_i2c_of_match);

-- 
2.49.0.472.ge94155a9ec-goog

[PATCH v2 18/32] mfd: sec: change device_type to int

[André Draszik]

Now that sec-i2c doesn't match device type by pointer casting anymore,
we can switch the device type from unsigned long to int easily.

This saves a few bytes in struct sec_pmic_dev due to member alignment.

Signed-off-by: André Draszik <andre.draszik@linaro.org>
---
 drivers/mfd/sec-common.c         | 9 ++++-----
 drivers/mfd/sec-core.h           | 5 ++---
 drivers/mfd/sec-i2c.c            | 2 +-
 drivers/mfd/sec-irq.c            | 5 ++---
 include/linux/mfd/samsung/core.h | 2 +-
 5 files changed, 10 insertions(+), 13 deletions(-)

diff --git a/drivers/mfd/sec-common.c b/drivers/mfd/sec-common.c
index bb0eb3c2d9a260ddf2fb110cc255f08a0d25230d..4871492548f5efde4248b5b3db74045ec8c9d676 100644
--- a/drivers/mfd/sec-common.c
+++ b/drivers/mfd/sec-common.c
@@ -155,9 +155,8 @@ sec_pmic_parse_dt_pdata(struct device *dev)
 	return pd;
 }
 
-int sec_pmic_probe(struct device *dev, unsigned long device_type,
-		   unsigned int irq, struct regmap *regmap,
-		   struct i2c_client *client)
+int sec_pmic_probe(struct device *dev, int device_type, unsigned int irq,
+		   struct regmap *regmap, struct i2c_client *client)
 {
 	struct sec_platform_data *pdata;
 	const struct mfd_cell *sec_devs;
@@ -232,7 +231,7 @@ int sec_pmic_probe(struct device *dev, unsigned long device_type,
 		break;
 	default:
 		return dev_err_probe(sec_pmic->dev, -EINVAL,
-				     "Unsupported device type %lu\n",
+				     "Unsupported device type %d\n",
 				     sec_pmic->device_type);
 	}
 	ret = devm_mfd_add_devices(sec_pmic->dev, -1, sec_devs, num_sec_devs,
@@ -266,7 +265,7 @@ void sec_pmic_shutdown(struct device *dev)
 		 * ignore the rest.
 		 */
 		dev_warn(sec_pmic->dev,
-			 "Unsupported device %lu for manual power off\n",
+			 "Unsupported device %d for manual power off\n",
 			 sec_pmic->device_type);
 		return;
 	}
diff --git a/drivers/mfd/sec-core.h b/drivers/mfd/sec-core.h
index a0a3488924d96f69373e7569079cfefd0544ca26..92c7558ab8b0de44a52e028eeb7998e38358cb4c 100644
--- a/drivers/mfd/sec-core.h
+++ b/drivers/mfd/sec-core.h
@@ -14,9 +14,8 @@ struct i2c_client;
 
 extern const struct dev_pm_ops sec_pmic_pm_ops;
 
-int sec_pmic_probe(struct device *dev, unsigned long device_type,
-		   unsigned int irq, struct regmap *regmap,
-		   struct i2c_client *client);
+int sec_pmic_probe(struct device *dev, int device_type, unsigned int irq,
+		   struct regmap *regmap, struct i2c_client *client);
 void sec_pmic_shutdown(struct device *dev);
 
 int sec_irq_init(struct sec_pmic_dev *sec_pmic);
diff --git a/drivers/mfd/sec-i2c.c b/drivers/mfd/sec-i2c.c
index 41b09f5e3c49f410604a5d47e625cbb37d7f5fa2..2ccb494c8c024361c78e92be71ce9c215757dd89 100644
--- a/drivers/mfd/sec-i2c.c
+++ b/drivers/mfd/sec-i2c.c
@@ -27,7 +27,7 @@
 
 struct sec_pmic_i2c_platform_data {
 	const struct regmap_config *regmap_cfg;
-	unsigned long device_type;
+	int device_type;
 };
 
 static bool s2mpa01_volatile(struct device *dev, unsigned int reg)
diff --git a/drivers/mfd/sec-irq.c b/drivers/mfd/sec-irq.c
index 79a3b33441fa5ab48b4b233eb8d89b4c20c142ed..c4db58813059f07372679223ec570ed07f52cd73 100644
--- a/drivers/mfd/sec-irq.c
+++ b/drivers/mfd/sec-irq.c
@@ -449,10 +449,9 @@ static const struct regmap_irq_chip s5m8767_irq_chip = {
 int sec_irq_init(struct sec_pmic_dev *sec_pmic)
 {
 	int ret = 0;
-	int type = sec_pmic->device_type;
 	const struct regmap_irq_chip *sec_irq_chip;
 
-	switch (type) {
+	switch (sec_pmic->device_type) {
 	case S5M8767X:
 		sec_irq_chip = &s5m8767_irq_chip;
 		break;
@@ -484,7 +483,7 @@ int sec_irq_init(struct sec_pmic_dev *sec_pmic)
 		break;
 	default:
 		return dev_err_probe(sec_pmic->dev, -EINVAL,
-				     "Unsupported device type %lu\n",
+				     "Unsupported device type %d\n",
 				     sec_pmic->device_type);
 	}
 
diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h
index c1102324172a9b6bd6072b5929a4866d6c9653fa..d785e101fe795a5d8f9cccf4ccc4232437e89416 100644
--- a/include/linux/mfd/samsung/core.h
+++ b/include/linux/mfd/samsung/core.h
@@ -67,7 +67,7 @@ struct sec_pmic_dev {
 	struct regmap *regmap_pmic;
 	struct i2c_client *i2c;
 
-	unsigned long device_type;
+	int device_type;
 	int irq;
 	struct regmap_irq_chip_data *irq_data;
 };

-- 
2.49.0.472.ge94155a9ec-goog

[PATCH v2 19/32] mfd: sec: don't compare against NULL / 0 for errors, use !

[André Draszik]

Follow general style and use if (!arg) instead of comparing against
NULL.

While at it, drop a useless init in sec-irq.c.

Signed-off-by: André Draszik <andre.draszik@linaro.org>
---
 drivers/mfd/sec-common.c | 2 +-
 drivers/mfd/sec-irq.c    | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/mfd/sec-common.c b/drivers/mfd/sec-common.c
index 4871492548f5efde4248b5b3db74045ec8c9d676..55edeb0f73ff4643f23b9759b115658d3bf03e9a 100644
--- a/drivers/mfd/sec-common.c
+++ b/drivers/mfd/sec-common.c
@@ -164,7 +164,7 @@ int sec_pmic_probe(struct device *dev, int device_type, unsigned int irq,
 	int ret, num_sec_devs;
 
 	sec_pmic = devm_kzalloc(dev, sizeof(struct sec_pmic_dev), GFP_KERNEL);
-	if (sec_pmic == NULL)
+	if (!sec_pmic)
 		return -ENOMEM;
 
 	dev_set_drvdata(dev, sec_pmic);
diff --git a/drivers/mfd/sec-irq.c b/drivers/mfd/sec-irq.c
index c4db58813059f07372679223ec570ed07f52cd73..5cd9667a21e9e8b052b2ef0b5d2991369bffe8bb 100644
--- a/drivers/mfd/sec-irq.c
+++ b/drivers/mfd/sec-irq.c
@@ -448,8 +448,8 @@ static const struct regmap_irq_chip s5m8767_irq_chip = {
 
 int sec_irq_init(struct sec_pmic_dev *sec_pmic)
 {
-	int ret = 0;
 	const struct regmap_irq_chip *sec_irq_chip;
+	int ret;
 
 	switch (sec_pmic->device_type) {
 	case S5M8767X:
@@ -496,7 +496,7 @@ int sec_irq_init(struct sec_pmic_dev *sec_pmic)
 	ret = devm_regmap_add_irq_chip(sec_pmic->dev, sec_pmic->regmap_pmic,
 				       sec_pmic->irq, IRQF_ONESHOT,
 				       0, sec_irq_chip, &sec_pmic->irq_data);
-	if (ret != 0)
+	if (ret)
 		return dev_err_probe(sec_pmic->dev, ret,
 				     "Failed to add %s IRQ chip\n",
 				     sec_irq_chip->name);

-- 
2.49.0.472.ge94155a9ec-goog

[PATCH v2 20/32] mfd: sec: use sizeof(*var), not sizeof(struct type_of_var)

[André Draszik]

Using sizeof(*var) is generally preferred over using the size of its
open-coded type when allocating memory.

This helps avoiding bugs when the variable type changes but the memory
allocation isn't updated, and it simplifies renaming of the struct if
ever necessary.

No functional change.

Signed-off-by: André Draszik <andre.draszik@linaro.org>
---
 drivers/mfd/sec-common.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mfd/sec-common.c b/drivers/mfd/sec-common.c
index 55edeb0f73ff4643f23b9759b115658d3bf03e9a..e8e35f7d5f06b522a953e8f21603e6904401c983 100644
--- a/drivers/mfd/sec-common.c
+++ b/drivers/mfd/sec-common.c
@@ -163,7 +163,7 @@ int sec_pmic_probe(struct device *dev, int device_type, unsigned int irq,
 	struct sec_pmic_dev *sec_pmic;
 	int ret, num_sec_devs;
 
-	sec_pmic = devm_kzalloc(dev, sizeof(struct sec_pmic_dev), GFP_KERNEL);
+	sec_pmic = devm_kzalloc(dev, sizeof(*sec_pmic), GFP_KERNEL);
 	if (!sec_pmic)
 		return -ENOMEM;
 

-- 
2.49.0.472.ge94155a9ec-goog

[PATCH v2 21/32] mfd: sec: convert to using MFD_CELL macros

[André Draszik]

Use MFD_CELL macro helpers instead of open coding. This makes the code
a bit shorter and more obvious.

Signed-off-by: André Draszik <andre.draszik@linaro.org>
---
 drivers/mfd/sec-common.c | 57 ++++++++++++++++++------------------------------
 1 file changed, 21 insertions(+), 36 deletions(-)

diff --git a/drivers/mfd/sec-common.c b/drivers/mfd/sec-common.c
index e8e35f7d5f06b522a953e8f21603e6904401c983..448300ab547c10d81f9f2b2798d54c8a03c714d8 100644
--- a/drivers/mfd/sec-common.c
+++ b/drivers/mfd/sec-common.c
@@ -24,16 +24,13 @@
 #include "sec-core.h"
 
 static const struct mfd_cell s5m8767_devs[] = {
-	{ .name = "s5m8767-pmic", },
-	{ .name = "s5m-rtc", },
-	{
-		.name = "s5m8767-clk",
-		.of_compatible = "samsung,s5m8767-clk",
-	},
+	MFD_CELL_NAME("s5m8767-pmic"),
+	MFD_CELL_NAME("s5m-rtc"),
+	MFD_CELL_OF("s5m8767-clk", NULL, NULL, 0, 0, "samsung,s5m8767-clk"),
 };
 
 static const struct mfd_cell s2dos05_devs[] = {
-	{ .name = "s2dos05-regulator", },
+	MFD_CELL_NAME("s2dos05-regulator"),
 };
 
 static const struct mfd_cell s2mpg10_devs[] = {
@@ -45,53 +42,41 @@ static const struct mfd_cell s2mpg10_devs[] = {
 };
 
 static const struct mfd_cell s2mps11_devs[] = {
-	{ .name = "s2mps11-regulator", },
-	{ .name = "s2mps14-rtc", },
-	{
-		.name = "s2mps11-clk",
-		.of_compatible = "samsung,s2mps11-clk",
-	},
+	MFD_CELL_NAME("s2mps11-regulator"),
+	MFD_CELL_NAME("s2mps14-rtc"),
+	MFD_CELL_OF("s2mps11-clk", NULL, NULL, 0, 0, "samsung,s2mps11-clk"),
 };
 
 static const struct mfd_cell s2mps13_devs[] = {
-	{ .name = "s2mps13-regulator", },
-	{ .name = "s2mps13-rtc", },
-	{
-		.name = "s2mps13-clk",
-		.of_compatible = "samsung,s2mps13-clk",
-	},
+	MFD_CELL_NAME("s2mps13-regulator"),
+	MFD_CELL_NAME("s2mps13-rtc"),
+	MFD_CELL_OF("s2mps13-clk", NULL, NULL, 0, 0, "samsung,s2mps13-clk"),
 };
 
 static const struct mfd_cell s2mps14_devs[] = {
-	{ .name = "s2mps14-regulator", },
-	{ .name = "s2mps14-rtc", },
-	{
-		.name = "s2mps14-clk",
-		.of_compatible = "samsung,s2mps14-clk",
-	},
+	MFD_CELL_NAME("s2mps14-regulator"),
+	MFD_CELL_NAME("s2mps14-rtc"),
+	MFD_CELL_OF("s2mps14-clk", NULL, NULL, 0, 0, "samsung,s2mps14-clk"),
 };
 
 static const struct mfd_cell s2mps15_devs[] = {
-	{ .name = "s2mps15-regulator", },
-	{ .name = "s2mps15-rtc", },
-	{
-		.name = "s2mps13-clk",
-		.of_compatible = "samsung,s2mps13-clk",
-	},
+	MFD_CELL_NAME("s2mps15-regulator"),
+	MFD_CELL_NAME("s2mps15-rtc"),
+	MFD_CELL_OF("s2mps13-clk", NULL, NULL, 0, 0, "samsung,s2mps13-clk"),
 };
 
 static const struct mfd_cell s2mpa01_devs[] = {
-	{ .name = "s2mpa01-pmic", },
-	{ .name = "s2mps14-rtc", },
+	MFD_CELL_NAME("s2mpa01-pmic"),
+	MFD_CELL_NAME("s2mps14-rtc"),
 };
 
 static const struct mfd_cell s2mpu02_devs[] = {
-	{ .name = "s2mpu02-regulator", },
+	MFD_CELL_NAME("s2mpu02-regulator"),
 };
 
 static const struct mfd_cell s2mpu05_devs[] = {
-	{ .name = "s2mpu05-regulator", },
-	{ .name = "s2mps15-rtc", },
+	MFD_CELL_NAME("s2mpu05-regulator"),
+	MFD_CELL_NAME("s2mps15-rtc"),
 };
 
 static void sec_pmic_dump_rev(struct sec_pmic_dev *sec_pmic)

-- 
2.49.0.472.ge94155a9ec-goog

[PATCH v2 22/32] mfd: sec: convert to using REGMAP_IRQ_REG() macros

[André Draszik]

Use REGMAP_IRQ_REG macro helpers instead of open coding. This makes the
code a bit shorter and more obvious.

Signed-off-by: André Draszik <andre.draszik@linaro.org>
---
 drivers/mfd/sec-irq.c | 343 +++++++++++---------------------------------------
 1 file changed, 75 insertions(+), 268 deletions(-)

diff --git a/drivers/mfd/sec-irq.c b/drivers/mfd/sec-irq.c
index 5cd9667a21e9e8b052b2ef0b5d2991369bffe8bb..a2c821704b771a9f8a10c7efc900812684771862 100644
--- a/drivers/mfd/sec-irq.c
+++ b/drivers/mfd/sec-irq.c
@@ -74,212 +74,68 @@ static const struct regmap_irq s2mpg10_irqs[] = {
 };
 
 static const struct regmap_irq s2mps11_irqs[] = {
-	[S2MPS11_IRQ_PWRONF] = {
-		.reg_offset = 0,
-		.mask = S2MPS11_IRQ_PWRONF_MASK,
-	},
-	[S2MPS11_IRQ_PWRONR] = {
-		.reg_offset = 0,
-		.mask = S2MPS11_IRQ_PWRONR_MASK,
-	},
-	[S2MPS11_IRQ_JIGONBF] = {
-		.reg_offset = 0,
-		.mask = S2MPS11_IRQ_JIGONBF_MASK,
-	},
-	[S2MPS11_IRQ_JIGONBR] = {
-		.reg_offset = 0,
-		.mask = S2MPS11_IRQ_JIGONBR_MASK,
-	},
-	[S2MPS11_IRQ_ACOKBF] = {
-		.reg_offset = 0,
-		.mask = S2MPS11_IRQ_ACOKBF_MASK,
-	},
-	[S2MPS11_IRQ_ACOKBR] = {
-		.reg_offset = 0,
-		.mask = S2MPS11_IRQ_ACOKBR_MASK,
-	},
-	[S2MPS11_IRQ_PWRON1S] = {
-		.reg_offset = 0,
-		.mask = S2MPS11_IRQ_PWRON1S_MASK,
-	},
-	[S2MPS11_IRQ_MRB] = {
-		.reg_offset = 0,
-		.mask = S2MPS11_IRQ_MRB_MASK,
-	},
-	[S2MPS11_IRQ_RTC60S] = {
-		.reg_offset = 1,
-		.mask = S2MPS11_IRQ_RTC60S_MASK,
-	},
-	[S2MPS11_IRQ_RTCA1] = {
-		.reg_offset = 1,
-		.mask = S2MPS11_IRQ_RTCA1_MASK,
-	},
-	[S2MPS11_IRQ_RTCA0] = {
-		.reg_offset = 1,
-		.mask = S2MPS11_IRQ_RTCA0_MASK,
-	},
-	[S2MPS11_IRQ_SMPL] = {
-		.reg_offset = 1,
-		.mask = S2MPS11_IRQ_SMPL_MASK,
-	},
-	[S2MPS11_IRQ_RTC1S] = {
-		.reg_offset = 1,
-		.mask = S2MPS11_IRQ_RTC1S_MASK,
-	},
-	[S2MPS11_IRQ_WTSR] = {
-		.reg_offset = 1,
-		.mask = S2MPS11_IRQ_WTSR_MASK,
-	},
-	[S2MPS11_IRQ_INT120C] = {
-		.reg_offset = 2,
-		.mask = S2MPS11_IRQ_INT120C_MASK,
-	},
-	[S2MPS11_IRQ_INT140C] = {
-		.reg_offset = 2,
-		.mask = S2MPS11_IRQ_INT140C_MASK,
-	},
+	REGMAP_IRQ_REG(S2MPS11_IRQ_PWRONF, 0, S2MPS11_IRQ_PWRONF_MASK),
+	REGMAP_IRQ_REG(S2MPS11_IRQ_PWRONR, 0, S2MPS11_IRQ_PWRONR_MASK),
+	REGMAP_IRQ_REG(S2MPS11_IRQ_JIGONBF, 0, S2MPS11_IRQ_JIGONBF_MASK),
+	REGMAP_IRQ_REG(S2MPS11_IRQ_JIGONBR, 0, S2MPS11_IRQ_JIGONBR_MASK),
+	REGMAP_IRQ_REG(S2MPS11_IRQ_ACOKBF, 0, S2MPS11_IRQ_ACOKBF_MASK),
+	REGMAP_IRQ_REG(S2MPS11_IRQ_ACOKBR, 0, S2MPS11_IRQ_ACOKBR_MASK),
+	REGMAP_IRQ_REG(S2MPS11_IRQ_PWRON1S, 0, S2MPS11_IRQ_PWRON1S_MASK),
+	REGMAP_IRQ_REG(S2MPS11_IRQ_MRB, 0, S2MPS11_IRQ_MRB_MASK),
+
+	REGMAP_IRQ_REG(S2MPS11_IRQ_RTC60S, 1, S2MPS11_IRQ_RTC60S_MASK),
+	REGMAP_IRQ_REG(S2MPS11_IRQ_RTCA1, 1, S2MPS11_IRQ_RTCA1_MASK),
+	REGMAP_IRQ_REG(S2MPS11_IRQ_RTCA0, 1, S2MPS11_IRQ_RTCA0_MASK),
+	REGMAP_IRQ_REG(S2MPS11_IRQ_SMPL, 1, S2MPS11_IRQ_SMPL_MASK),
+	REGMAP_IRQ_REG(S2MPS11_IRQ_RTC1S, 1, S2MPS11_IRQ_RTC1S_MASK),
+	REGMAP_IRQ_REG(S2MPS11_IRQ_WTSR, 1, S2MPS11_IRQ_WTSR_MASK),
+
+	REGMAP_IRQ_REG(S2MPS11_IRQ_INT120C, 2, S2MPS11_IRQ_INT120C_MASK),
+	REGMAP_IRQ_REG(S2MPS11_IRQ_INT140C, 2, S2MPS11_IRQ_INT140C_MASK),
 };
 
 static const struct regmap_irq s2mps14_irqs[] = {
-	[S2MPS14_IRQ_PWRONF] = {
-		.reg_offset = 0,
-		.mask = S2MPS11_IRQ_PWRONF_MASK,
-	},
-	[S2MPS14_IRQ_PWRONR] = {
-		.reg_offset = 0,
-		.mask = S2MPS11_IRQ_PWRONR_MASK,
-	},
-	[S2MPS14_IRQ_JIGONBF] = {
-		.reg_offset = 0,
-		.mask = S2MPS11_IRQ_JIGONBF_MASK,
-	},
-	[S2MPS14_IRQ_JIGONBR] = {
-		.reg_offset = 0,
-		.mask = S2MPS11_IRQ_JIGONBR_MASK,
-	},
-	[S2MPS14_IRQ_ACOKBF] = {
-		.reg_offset = 0,
-		.mask = S2MPS11_IRQ_ACOKBF_MASK,
-	},
-	[S2MPS14_IRQ_ACOKBR] = {
-		.reg_offset = 0,
-		.mask = S2MPS11_IRQ_ACOKBR_MASK,
-	},
-	[S2MPS14_IRQ_PWRON1S] = {
-		.reg_offset = 0,
-		.mask = S2MPS11_IRQ_PWRON1S_MASK,
-	},
-	[S2MPS14_IRQ_MRB] = {
-		.reg_offset = 0,
-		.mask = S2MPS11_IRQ_MRB_MASK,
-	},
-	[S2MPS14_IRQ_RTC60S] = {
-		.reg_offset = 1,
-		.mask = S2MPS11_IRQ_RTC60S_MASK,
-	},
-	[S2MPS14_IRQ_RTCA1] = {
-		.reg_offset = 1,
-		.mask = S2MPS11_IRQ_RTCA1_MASK,
-	},
-	[S2MPS14_IRQ_RTCA0] = {
-		.reg_offset = 1,
-		.mask = S2MPS11_IRQ_RTCA0_MASK,
-	},
-	[S2MPS14_IRQ_SMPL] = {
-		.reg_offset = 1,
-		.mask = S2MPS11_IRQ_SMPL_MASK,
-	},
-	[S2MPS14_IRQ_RTC1S] = {
-		.reg_offset = 1,
-		.mask = S2MPS11_IRQ_RTC1S_MASK,
-	},
-	[S2MPS14_IRQ_WTSR] = {
-		.reg_offset = 1,
-		.mask = S2MPS11_IRQ_WTSR_MASK,
-	},
-	[S2MPS14_IRQ_INT120C] = {
-		.reg_offset = 2,
-		.mask = S2MPS11_IRQ_INT120C_MASK,
-	},
-	[S2MPS14_IRQ_INT140C] = {
-		.reg_offset = 2,
-		.mask = S2MPS11_IRQ_INT140C_MASK,
-	},
-	[S2MPS14_IRQ_TSD] = {
-		.reg_offset = 2,
-		.mask = S2MPS14_IRQ_TSD_MASK,
-	},
+	REGMAP_IRQ_REG(S2MPS14_IRQ_PWRONF, 0, S2MPS11_IRQ_PWRONF_MASK),
+	REGMAP_IRQ_REG(S2MPS14_IRQ_PWRONR, 0, S2MPS11_IRQ_PWRONR_MASK),
+	REGMAP_IRQ_REG(S2MPS14_IRQ_JIGONBF, 0, S2MPS11_IRQ_JIGONBF_MASK),
+	REGMAP_IRQ_REG(S2MPS14_IRQ_JIGONBR, 0, S2MPS11_IRQ_JIGONBR_MASK),
+	REGMAP_IRQ_REG(S2MPS14_IRQ_ACOKBF, 0, S2MPS11_IRQ_ACOKBF_MASK),
+	REGMAP_IRQ_REG(S2MPS14_IRQ_ACOKBR, 0, S2MPS11_IRQ_ACOKBR_MASK),
+	REGMAP_IRQ_REG(S2MPS14_IRQ_PWRON1S, 0, S2MPS11_IRQ_PWRON1S_MASK),
+	REGMAP_IRQ_REG(S2MPS14_IRQ_MRB, 0, S2MPS11_IRQ_MRB_MASK),
+
+	REGMAP_IRQ_REG(S2MPS14_IRQ_RTC60S, 1, S2MPS11_IRQ_RTC60S_MASK),
+	REGMAP_IRQ_REG(S2MPS14_IRQ_RTCA1, 1, S2MPS11_IRQ_RTCA1_MASK),
+	REGMAP_IRQ_REG(S2MPS14_IRQ_RTCA0, 1, S2MPS11_IRQ_RTCA0_MASK),
+	REGMAP_IRQ_REG(S2MPS14_IRQ_SMPL, 1, S2MPS11_IRQ_SMPL_MASK),
+	REGMAP_IRQ_REG(S2MPS14_IRQ_RTC1S, 1, S2MPS11_IRQ_RTC1S_MASK),
+	REGMAP_IRQ_REG(S2MPS14_IRQ_WTSR, 1, S2MPS11_IRQ_WTSR_MASK),
+
+	REGMAP_IRQ_REG(S2MPS14_IRQ_INT120C, 2, S2MPS11_IRQ_INT120C_MASK),
+	REGMAP_IRQ_REG(S2MPS14_IRQ_INT140C, 2, S2MPS11_IRQ_INT140C_MASK),
+	REGMAP_IRQ_REG(S2MPS14_IRQ_TSD, 2, S2MPS14_IRQ_TSD_MASK),
 };
 
 static const struct regmap_irq s2mpu02_irqs[] = {
-	[S2MPU02_IRQ_PWRONF] = {
-		.reg_offset = 0,
-		.mask = S2MPS11_IRQ_PWRONF_MASK,
-	},
-	[S2MPU02_IRQ_PWRONR] = {
-		.reg_offset = 0,
-		.mask = S2MPS11_IRQ_PWRONR_MASK,
-	},
-	[S2MPU02_IRQ_JIGONBF] = {
-		.reg_offset = 0,
-		.mask = S2MPS11_IRQ_JIGONBF_MASK,
-	},
-	[S2MPU02_IRQ_JIGONBR] = {
-		.reg_offset = 0,
-		.mask = S2MPS11_IRQ_JIGONBR_MASK,
-	},
-	[S2MPU02_IRQ_ACOKBF] = {
-		.reg_offset = 0,
-		.mask = S2MPS11_IRQ_ACOKBF_MASK,
-	},
-	[S2MPU02_IRQ_ACOKBR] = {
-		.reg_offset = 0,
-		.mask = S2MPS11_IRQ_ACOKBR_MASK,
-	},
-	[S2MPU02_IRQ_PWRON1S] = {
-		.reg_offset = 0,
-		.mask = S2MPS11_IRQ_PWRON1S_MASK,
-	},
-	[S2MPU02_IRQ_MRB] = {
-		.reg_offset = 0,
-		.mask = S2MPS11_IRQ_MRB_MASK,
-	},
-	[S2MPU02_IRQ_RTC60S] = {
-		.reg_offset = 1,
-		.mask = S2MPS11_IRQ_RTC60S_MASK,
-	},
-	[S2MPU02_IRQ_RTCA1] = {
-		.reg_offset = 1,
-		.mask = S2MPS11_IRQ_RTCA1_MASK,
-	},
-	[S2MPU02_IRQ_RTCA0] = {
-		.reg_offset = 1,
-		.mask = S2MPS11_IRQ_RTCA0_MASK,
-	},
-	[S2MPU02_IRQ_SMPL] = {
-		.reg_offset = 1,
-		.mask = S2MPS11_IRQ_SMPL_MASK,
-	},
-	[S2MPU02_IRQ_RTC1S] = {
-		.reg_offset = 1,
-		.mask = S2MPS11_IRQ_RTC1S_MASK,
-	},
-	[S2MPU02_IRQ_WTSR] = {
-		.reg_offset = 1,
-		.mask = S2MPS11_IRQ_WTSR_MASK,
-	},
-	[S2MPU02_IRQ_INT120C] = {
-		.reg_offset = 2,
-		.mask = S2MPS11_IRQ_INT120C_MASK,
-	},
-	[S2MPU02_IRQ_INT140C] = {
-		.reg_offset = 2,
-		.mask = S2MPS11_IRQ_INT140C_MASK,
-	},
-	[S2MPU02_IRQ_TSD] = {
-		.reg_offset = 2,
-		.mask = S2MPS14_IRQ_TSD_MASK,
-	},
+	REGMAP_IRQ_REG(S2MPU02_IRQ_PWRONF, 0, S2MPS11_IRQ_PWRONF_MASK),
+	REGMAP_IRQ_REG(S2MPU02_IRQ_PWRONR, 0, S2MPS11_IRQ_PWRONR_MASK),
+	REGMAP_IRQ_REG(S2MPU02_IRQ_JIGONBF, 0, S2MPS11_IRQ_JIGONBF_MASK),
+	REGMAP_IRQ_REG(S2MPU02_IRQ_JIGONBR, 0, S2MPS11_IRQ_JIGONBR_MASK),
+	REGMAP_IRQ_REG(S2MPU02_IRQ_ACOKBF, 0, S2MPS11_IRQ_ACOKBF_MASK),
+	REGMAP_IRQ_REG(S2MPU02_IRQ_ACOKBR, 0, S2MPS11_IRQ_ACOKBR_MASK),
+	REGMAP_IRQ_REG(S2MPU02_IRQ_PWRON1S, 0, S2MPS11_IRQ_PWRON1S_MASK),
+	REGMAP_IRQ_REG(S2MPU02_IRQ_MRB, 0, S2MPS11_IRQ_MRB_MASK),
+
+	REGMAP_IRQ_REG(S2MPU02_IRQ_RTC60S, 1, S2MPS11_IRQ_RTC60S_MASK),
+	REGMAP_IRQ_REG(S2MPU02_IRQ_RTCA1, 1, S2MPS11_IRQ_RTCA1_MASK),
+	REGMAP_IRQ_REG(S2MPU02_IRQ_RTCA0, 1, S2MPS11_IRQ_RTCA0_MASK),
+	REGMAP_IRQ_REG(S2MPU02_IRQ_SMPL, 1, S2MPS11_IRQ_SMPL_MASK),
+	REGMAP_IRQ_REG(S2MPU02_IRQ_RTC1S, 1, S2MPS11_IRQ_RTC1S_MASK),
+	REGMAP_IRQ_REG(S2MPU02_IRQ_WTSR, 1, S2MPS11_IRQ_WTSR_MASK),
+
+	REGMAP_IRQ_REG(S2MPU02_IRQ_INT120C, 2, S2MPS11_IRQ_INT120C_MASK),
+	REGMAP_IRQ_REG(S2MPU02_IRQ_INT140C, 2, S2MPS11_IRQ_INT140C_MASK),
+	REGMAP_IRQ_REG(S2MPU02_IRQ_TSD, 2, S2MPS14_IRQ_TSD_MASK),
 };
 
 static const struct regmap_irq s2mpu05_irqs[] = {
@@ -303,74 +159,25 @@ static const struct regmap_irq s2mpu05_irqs[] = {
 };
 
 static const struct regmap_irq s5m8767_irqs[] = {
-	[S5M8767_IRQ_PWRR] = {
-		.reg_offset = 0,
-		.mask = S5M8767_IRQ_PWRR_MASK,
-	},
-	[S5M8767_IRQ_PWRF] = {
-		.reg_offset = 0,
-		.mask = S5M8767_IRQ_PWRF_MASK,
-	},
-	[S5M8767_IRQ_PWR1S] = {
-		.reg_offset = 0,
-		.mask = S5M8767_IRQ_PWR1S_MASK,
-	},
-	[S5M8767_IRQ_JIGR] = {
-		.reg_offset = 0,
-		.mask = S5M8767_IRQ_JIGR_MASK,
-	},
-	[S5M8767_IRQ_JIGF] = {
-		.reg_offset = 0,
-		.mask = S5M8767_IRQ_JIGF_MASK,
-	},
-	[S5M8767_IRQ_LOWBAT2] = {
-		.reg_offset = 0,
-		.mask = S5M8767_IRQ_LOWBAT2_MASK,
-	},
-	[S5M8767_IRQ_LOWBAT1] = {
-		.reg_offset = 0,
-		.mask = S5M8767_IRQ_LOWBAT1_MASK,
-	},
-	[S5M8767_IRQ_MRB] = {
-		.reg_offset = 1,
-		.mask = S5M8767_IRQ_MRB_MASK,
-	},
-	[S5M8767_IRQ_DVSOK2] = {
-		.reg_offset = 1,
-		.mask = S5M8767_IRQ_DVSOK2_MASK,
-	},
-	[S5M8767_IRQ_DVSOK3] = {
-		.reg_offset = 1,
-		.mask = S5M8767_IRQ_DVSOK3_MASK,
-	},
-	[S5M8767_IRQ_DVSOK4] = {
-		.reg_offset = 1,
-		.mask = S5M8767_IRQ_DVSOK4_MASK,
-	},
-	[S5M8767_IRQ_RTC60S] = {
-		.reg_offset = 2,
-		.mask = S5M8767_IRQ_RTC60S_MASK,
-	},
-	[S5M8767_IRQ_RTCA1] = {
-		.reg_offset = 2,
-		.mask = S5M8767_IRQ_RTCA1_MASK,
-	},
-	[S5M8767_IRQ_RTCA2] = {
-		.reg_offset = 2,
-		.mask = S5M8767_IRQ_RTCA2_MASK,
-	},
-	[S5M8767_IRQ_SMPL] = {
-		.reg_offset = 2,
-		.mask = S5M8767_IRQ_SMPL_MASK,
-	},
-	[S5M8767_IRQ_RTC1S] = {
-		.reg_offset = 2,
-		.mask = S5M8767_IRQ_RTC1S_MASK,
-	},
-	[S5M8767_IRQ_WTSR] = {
-		.reg_offset = 2,
-		.mask = S5M8767_IRQ_WTSR_MASK,
-	},
+	REGMAP_IRQ_REG(S5M8767_IRQ_PWRR, 0, S5M8767_IRQ_PWRR_MASK),
+	REGMAP_IRQ_REG(S5M8767_IRQ_PWRF, 0, S5M8767_IRQ_PWRF_MASK),
+	REGMAP_IRQ_REG(S5M8767_IRQ_PWR1S, 0, S5M8767_IRQ_PWR1S_MASK),
+	REGMAP_IRQ_REG(S5M8767_IRQ_JIGR, 0, S5M8767_IRQ_JIGR_MASK),
+	REGMAP_IRQ_REG(S5M8767_IRQ_JIGF, 0, S5M8767_IRQ_JIGF_MASK),
+	REGMAP_IRQ_REG(S5M8767_IRQ_LOWBAT2, 0, S5M8767_IRQ_LOWBAT2_MASK),
+	REGMAP_IRQ_REG(S5M8767_IRQ_LOWBAT1, 0, S5M8767_IRQ_LOWBAT1_MASK),
+
+	REGMAP_IRQ_REG(S5M8767_IRQ_MRB, 1, S5M8767_IRQ_MRB_MASK),
+	REGMAP_IRQ_REG(S5M8767_IRQ_DVSOK2, 1, S5M8767_IRQ_DVSOK2_MASK),
+	REGMAP_IRQ_REG(S5M8767_IRQ_DVSOK3, 1, S5M8767_IRQ_DVSOK3_MASK),
+	REGMAP_IRQ_REG(S5M8767_IRQ_DVSOK4, 1, S5M8767_IRQ_DVSOK4_MASK),
+
+	REGMAP_IRQ_REG(S5M8767_IRQ_RTC60S, 2, S5M8767_IRQ_RTC60S_MASK),
+	REGMAP_IRQ_REG(S5M8767_IRQ_RTCA1, 2, S5M8767_IRQ_RTCA1_MASK),
+	REGMAP_IRQ_REG(S5M8767_IRQ_RTCA2, 2, S5M8767_IRQ_RTCA2_MASK),
+	REGMAP_IRQ_REG(S5M8767_IRQ_SMPL, 2, S5M8767_IRQ_SMPL_MASK),
+	REGMAP_IRQ_REG(S5M8767_IRQ_RTC1S, 2, S5M8767_IRQ_RTC1S_MASK),
+	REGMAP_IRQ_REG(S5M8767_IRQ_WTSR, 2, S5M8767_IRQ_WTSR_MASK),
 };
 
 static const struct regmap_irq_chip s2mpg10_irq_chip = {

-- 
2.49.0.472.ge94155a9ec-goog

[PATCH v2 23/32] mfd: sec: add myself as module author

[André Draszik]

Add myself as module author, so people know whom to complain to about
after the recent updates :-)

Signed-off-by: André Draszik <andre.draszik@linaro.org>
---
 drivers/mfd/sec-common.c | 1 +
 drivers/mfd/sec-i2c.c    | 1 +
 2 files changed, 2 insertions(+)

diff --git a/drivers/mfd/sec-common.c b/drivers/mfd/sec-common.c
index 448300ab547c10d81f9f2b2798d54c8a03c714d8..05658f05cb857a784c7d01b1cf25de4870e1a95e 100644
--- a/drivers/mfd/sec-common.c
+++ b/drivers/mfd/sec-common.c
@@ -293,6 +293,7 @@ static int sec_pmic_resume(struct device *dev)
 DEFINE_SIMPLE_DEV_PM_OPS(sec_pmic_pm_ops, sec_pmic_suspend, sec_pmic_resume);
 EXPORT_SYMBOL_GPL(sec_pmic_pm_ops);
 
+MODULE_AUTHOR("André Draszik <andre.draszik@linaro.org>");
 MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>");
 MODULE_AUTHOR("Krzysztof Kozlowski <krzk@kernel.org>");
 MODULE_AUTHOR("Sangbeom Kim <sbkim73@samsung.com>");
diff --git a/drivers/mfd/sec-i2c.c b/drivers/mfd/sec-i2c.c
index 2ccb494c8c024361c78e92be71ce9c215757dd89..74fd28a6bc9a42879fc1eb05546777f60e0062e9 100644
--- a/drivers/mfd/sec-i2c.c
+++ b/drivers/mfd/sec-i2c.c
@@ -233,6 +233,7 @@ static struct i2c_driver sec_pmic_i2c_driver = {
 };
 module_i2c_driver(sec_pmic_i2c_driver);
 
+MODULE_AUTHOR("André Draszik <andre.draszik@linaro.org>");
 MODULE_AUTHOR("Sangbeom Kim <sbkim73@samsung.com>");
 MODULE_DESCRIPTION("I2C driver for the Samsung S5M");
 MODULE_LICENSE("GPL");

-- 
2.49.0.472.ge94155a9ec-goog

[PATCH v2 24/32] clk: s2mps11: add support for S2MPG10 PMIC clock

[André Draszik]

Add support for Samsung's S2MPG10 PMIC clock, which is similar to the
existing PMIC clocks supported by this driver.

S2MPG10 has three clock outputs @ 32kHz: AP, peri1 and peri2.

Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
---
 drivers/clk/clk-s2mps11.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/clk/clk-s2mps11.c b/drivers/clk/clk-s2mps11.c
index 8ddf3a9a53dfd5bb52a05a3e02788a357ea77ad3..92c8d36dafcf8a448873567fb3541a1b90cd9837 100644
--- a/drivers/clk/clk-s2mps11.c
+++ b/drivers/clk/clk-s2mps11.c
@@ -11,6 +11,7 @@
 #include <linux/regmap.h>
 #include <linux/clk-provider.h>
 #include <linux/platform_device.h>
+#include <linux/mfd/samsung/s2mpg10.h>
 #include <linux/mfd/samsung/s2mps11.h>
 #include <linux/mfd/samsung/s2mps13.h>
 #include <linux/mfd/samsung/s2mps14.h>
@@ -140,6 +141,9 @@ static int s2mps11_clk_probe(struct platform_device *pdev)
 	clk_data->num = S2MPS11_CLKS_NUM;
 
 	switch (hwid) {
+	case S2MPG10:
+		s2mps11_reg = S2MPG10_PMIC_RTCBUF;
+		break;
 	case S2MPS11X:
 		s2mps11_reg = S2MPS11_REG_RTC_CTRL;
 		break;
@@ -221,6 +225,7 @@ static void s2mps11_clk_remove(struct platform_device *pdev)
 }
 
 static const struct platform_device_id s2mps11_clk_id[] = {
+	{ "s2mpg10-clk", S2MPG10},
 	{ "s2mps11-clk", S2MPS11X},
 	{ "s2mps13-clk", S2MPS13X},
 	{ "s2mps14-clk", S2MPS14X},
@@ -241,6 +246,9 @@ MODULE_DEVICE_TABLE(platform, s2mps11_clk_id);
  */
 static const struct of_device_id s2mps11_dt_match[] __used = {
 	{
+		.compatible = "samsung,s2mpg10-clk",
+		.data = (void *)S2MPG10,
+	}, {
 		.compatible = "samsung,s2mps11-clk",
 		.data = (void *)S2MPS11X,
 	}, {

-- 
2.49.0.472.ge94155a9ec-goog

[PATCH v2 25/32] rtc: s5m: cache value of platform_get_device_id() during probe

[André Draszik]

platform_get_device_id() is called mulitple times during probe. This
makes the code harder to read than necessary.

Just get the ID once, which also trims the lengths of the lines
involved.

Signed-off-by: André Draszik <andre.draszik@linaro.org>
---
 drivers/rtc/rtc-s5m.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/rtc/rtc-s5m.c b/drivers/rtc/rtc-s5m.c
index db5c9b641277213aa1371776c63e2eda3f223465..53c76b0e4253a9ba225c3c723d35d9182d071607 100644
--- a/drivers/rtc/rtc-s5m.c
+++ b/drivers/rtc/rtc-s5m.c
@@ -637,6 +637,8 @@ static int s5m8767_rtc_init_reg(struct s5m_rtc_info *info)
 static int s5m_rtc_probe(struct platform_device *pdev)
 {
 	struct sec_pmic_dev *s5m87xx = dev_get_drvdata(pdev->dev.parent);
+	const struct platform_device_id	* const id =
+		platform_get_device_id(pdev);
 	struct s5m_rtc_info *info;
 	struct i2c_client *i2c;
 	const struct regmap_config *regmap_cfg;
@@ -646,7 +648,7 @@ static int s5m_rtc_probe(struct platform_device *pdev)
 	if (!info)
 		return -ENOMEM;
 
-	switch (platform_get_device_id(pdev)->driver_data) {
+	switch (id->driver_data) {
 	case S2MPS15X:
 		regmap_cfg = &s2mps14_rtc_regmap_config;
 		info->regs = &s2mps15_rtc_regs;
@@ -670,7 +672,7 @@ static int s5m_rtc_probe(struct platform_device *pdev)
 	default:
 		return dev_err_probe(&pdev->dev, -ENODEV,
 				     "Device type %lu is not supported by RTC driver\n",
-				     platform_get_device_id(pdev)->driver_data);
+				     id->driver_data);
 	}
 
 	i2c = devm_i2c_new_dummy_device(&pdev->dev, s5m87xx->i2c->adapter,
@@ -686,7 +688,7 @@ static int s5m_rtc_probe(struct platform_device *pdev)
 
 	info->dev = &pdev->dev;
 	info->s5m87xx = s5m87xx;
-	info->device_type = platform_get_device_id(pdev)->driver_data;
+	info->device_type = id->driver_data;
 
 	if (s5m87xx->irq_data) {
 		info->irq = regmap_irq_get_virq(s5m87xx->irq_data, alarm_irq);

-- 
2.49.0.472.ge94155a9ec-goog

[PATCH v2 26/32] rtc: s5m: prepare for external regmap

[André Draszik]

The Samsung S2MPG10 PMIC is not connected via I2C as this driver
assumes, hence this driver's current approach of creating an I2C-based
regmap doesn't work for it, and this driver should use the regmap
provided by the parent (core) driver instead for that PMIC.

To prepare this driver for s2mpg support, restructure the code to only
create a regmap if one isn't provided by the parent.

No functional changes, since the parent doesn't provide a regmap for
any of the PMICs currently supported by this driver. Having this change
separate will simply make the addition of S2MPG10 support more
self-contained, without additional restructuring.

Signed-off-by: André Draszik <andre.draszik@linaro.org>
---
 drivers/rtc/rtc-s5m.c | 81 ++++++++++++++++++++++++++++-----------------------
 1 file changed, 45 insertions(+), 36 deletions(-)

diff --git a/drivers/rtc/rtc-s5m.c b/drivers/rtc/rtc-s5m.c
index 53c76b0e4253a9ba225c3c723d35d9182d071607..86ccf666c68059408907c97f2647716ffaad10c6 100644
--- a/drivers/rtc/rtc-s5m.c
+++ b/drivers/rtc/rtc-s5m.c
@@ -640,52 +640,61 @@ static int s5m_rtc_probe(struct platform_device *pdev)
 	const struct platform_device_id	* const id =
 		platform_get_device_id(pdev);
 	struct s5m_rtc_info *info;
-	struct i2c_client *i2c;
-	const struct regmap_config *regmap_cfg;
 	int ret, alarm_irq;
 
 	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
 	if (!info)
 		return -ENOMEM;
 
-	switch (id->driver_data) {
-	case S2MPS15X:
-		regmap_cfg = &s2mps14_rtc_regmap_config;
-		info->regs = &s2mps15_rtc_regs;
-		alarm_irq = S2MPS14_IRQ_RTCA0;
-		break;
-	case S2MPS14X:
-		regmap_cfg = &s2mps14_rtc_regmap_config;
-		info->regs = &s2mps14_rtc_regs;
-		alarm_irq = S2MPS14_IRQ_RTCA0;
-		break;
-	case S2MPS13X:
-		regmap_cfg = &s2mps14_rtc_regmap_config;
-		info->regs = &s2mps13_rtc_regs;
-		alarm_irq = S2MPS14_IRQ_RTCA0;
-		break;
-	case S5M8767X:
-		regmap_cfg = &s5m_rtc_regmap_config;
-		info->regs = &s5m_rtc_regs;
-		alarm_irq = S5M8767_IRQ_RTCA1;
-		break;
-	default:
+	info->regmap = dev_get_regmap(pdev->dev.parent, "rtc");
+	if (!info->regmap) {
+		const struct regmap_config *regmap_cfg;
+		struct i2c_client *i2c;
+
+		switch (id->driver_data) {
+		case S2MPS15X:
+			regmap_cfg = &s2mps14_rtc_regmap_config;
+			info->regs = &s2mps15_rtc_regs;
+			alarm_irq = S2MPS14_IRQ_RTCA0;
+			break;
+		case S2MPS14X:
+			regmap_cfg = &s2mps14_rtc_regmap_config;
+			info->regs = &s2mps14_rtc_regs;
+			alarm_irq = S2MPS14_IRQ_RTCA0;
+			break;
+		case S2MPS13X:
+			regmap_cfg = &s2mps14_rtc_regmap_config;
+			info->regs = &s2mps13_rtc_regs;
+			alarm_irq = S2MPS14_IRQ_RTCA0;
+			break;
+		case S5M8767X:
+			regmap_cfg = &s5m_rtc_regmap_config;
+			info->regs = &s5m_rtc_regs;
+			alarm_irq = S5M8767_IRQ_RTCA1;
+			break;
+		default:
+			return dev_err_probe(&pdev->dev, -ENODEV,
+					     "Unsupported device type %lu\n",
+					     id->driver_data);
+		}
+
+		i2c = devm_i2c_new_dummy_device(&pdev->dev,
+						s5m87xx->i2c->adapter,
+						RTC_I2C_ADDR);
+		if (IS_ERR(i2c))
+			return dev_err_probe(&pdev->dev, PTR_ERR(i2c),
+					     "Failed to allocate I2C\n");
+
+		info->regmap = devm_regmap_init_i2c(i2c, regmap_cfg);
+		if (IS_ERR(info->regmap))
+			return dev_err_probe(&pdev->dev, PTR_ERR(info->regmap),
+					     "Failed to allocate regmap\n");
+	} else {
 		return dev_err_probe(&pdev->dev, -ENODEV,
-				     "Device type %lu is not supported by RTC driver\n",
+				     "Unsupported device type %lu\n",
 				     id->driver_data);
 	}
 
-	i2c = devm_i2c_new_dummy_device(&pdev->dev, s5m87xx->i2c->adapter,
-					RTC_I2C_ADDR);
-	if (IS_ERR(i2c))
-		return dev_err_probe(&pdev->dev, PTR_ERR(i2c),
-				     "Failed to allocate I2C for RTC\n");
-
-	info->regmap = devm_regmap_init_i2c(i2c, regmap_cfg);
-	if (IS_ERR(info->regmap))
-		return dev_err_probe(&pdev->dev, PTR_ERR(info->regmap),
-				     "Failed to allocate RTC register map\n");
-
 	info->dev = &pdev->dev;
 	info->s5m87xx = s5m87xx;
 	info->device_type = id->driver_data;

-- 
2.49.0.472.ge94155a9ec-goog

[PATCH v2 27/32] rtc: s5m: add support for S2MPG10 RTC

[André Draszik]

Add support for Samsung's S2MPG10 PMIC RTC, which is similar to the
existing PMIC RTCs supported by this driver.

S2MPG10 doesn't use I2C, so we expect the core driver to have created a
regmap for us.

Additionally, it can be used for doing a cold-reset. If requested to do
so (via DT), S2MPG10 is programmed with a watchdog configuration that
will perform a full power cycle upon watchdog expiry.

Signed-off-by: André Draszik <andre.draszik@linaro.org>
---
 drivers/rtc/rtc-s5m.c | 60 +++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 60 insertions(+)

diff --git a/drivers/rtc/rtc-s5m.c b/drivers/rtc/rtc-s5m.c
index 86ccf666c68059408907c97f2647716ffaad10c6..0d8783577bab4f4ebe61050dbd68387d970773bd 100644
--- a/drivers/rtc/rtc-s5m.c
+++ b/drivers/rtc/rtc-s5m.c
@@ -11,6 +11,7 @@
 #include <linux/i2c.h>
 #include <linux/bcd.h>
 #include <linux/regmap.h>
+#include <linux/reboot.h>
 #include <linux/rtc.h>
 #include <linux/platform_device.h>
 #include <linux/mfd/samsung/core.h>
@@ -53,6 +54,7 @@ enum {
  * Device     | Write time | Read time | Write alarm
  * =================================================
  * S5M8767    | UDR + TIME |           | UDR
+ * S2MPG10    | WUDR       | RUDR      | AUDR
  * S2MPS11/14 | WUDR       | RUDR      | WUDR + RUDR
  * S2MPS13    | WUDR       | RUDR      | WUDR + AUDR
  * S2MPS15    | WUDR       | RUDR      | AUDR
@@ -99,6 +101,20 @@ static const struct s5m_rtc_reg_config s5m_rtc_regs = {
 	.write_alarm_udr_mask	= S5M_RTC_UDR_MASK,
 };
 
+/* Register map for S2MPG10 */
+static const struct s5m_rtc_reg_config s2mpg10_rtc_regs = {
+	.regs_count		= 7,
+	.time			= S2MPG10_RTC_SEC,
+	.ctrl			= S2MPG10_RTC_CTRL,
+	.alarm0			= S2MPG10_RTC_A0SEC,
+	.alarm1			= S2MPG10_RTC_A1SEC,
+	.udr_update		= S2MPG10_RTC_UPDATE,
+	.autoclear_udr_mask	= S2MPS15_RTC_WUDR_MASK | S2MPS15_RTC_AUDR_MASK,
+	.read_time_udr_mask	= S2MPS_RTC_RUDR_MASK,
+	.write_time_udr_mask	= S2MPS15_RTC_WUDR_MASK,
+	.write_alarm_udr_mask	= S2MPS15_RTC_AUDR_MASK,
+};
+
 /* Register map for S2MPS13 */
 static const struct s5m_rtc_reg_config s2mps13_rtc_regs = {
 	.regs_count		= 7,
@@ -238,6 +254,7 @@ static int s5m_check_peding_alarm_interrupt(struct s5m_rtc_info *info,
 		ret = regmap_read(info->regmap, S5M_RTC_STATUS, &val);
 		val &= S5M_ALARM0_STATUS;
 		break;
+	case S2MPG10:
 	case S2MPS15X:
 	case S2MPS14X:
 	case S2MPS13X:
@@ -300,6 +317,7 @@ static int s5m8767_rtc_set_alarm_reg(struct s5m_rtc_info *info)
 	case S5M8767X:
 		data &= ~S5M_RTC_TIME_EN_MASK;
 		break;
+	case S2MPG10:
 	case S2MPS15X:
 	case S2MPS14X:
 	case S2MPS13X:
@@ -351,6 +369,7 @@ static int s5m_rtc_read_time(struct device *dev, struct rtc_time *tm)
 
 	switch (info->device_type) {
 	case S5M8767X:
+	case S2MPG10:
 	case S2MPS15X:
 	case S2MPS14X:
 	case S2MPS13X:
@@ -374,6 +393,7 @@ static int s5m_rtc_set_time(struct device *dev, struct rtc_time *tm)
 
 	switch (info->device_type) {
 	case S5M8767X:
+	case S2MPG10:
 	case S2MPS15X:
 	case S2MPS14X:
 	case S2MPS13X:
@@ -411,6 +431,7 @@ static int s5m_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 
 	switch (info->device_type) {
 	case S5M8767X:
+	case S2MPG10:
 	case S2MPS15X:
 	case S2MPS14X:
 	case S2MPS13X:
@@ -449,6 +470,7 @@ static int s5m_rtc_stop_alarm(struct s5m_rtc_info *info)
 
 	switch (info->device_type) {
 	case S5M8767X:
+	case S2MPG10:
 	case S2MPS15X:
 	case S2MPS14X:
 	case S2MPS13X:
@@ -487,6 +509,7 @@ static int s5m_rtc_start_alarm(struct s5m_rtc_info *info)
 
 	switch (info->device_type) {
 	case S5M8767X:
+	case S2MPG10:
 	case S2MPS15X:
 	case S2MPS14X:
 	case S2MPS13X:
@@ -524,6 +547,7 @@ static int s5m_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 
 	switch (info->device_type) {
 	case S5M8767X:
+	case S2MPG10:
 	case S2MPS15X:
 	case S2MPS14X:
 	case S2MPS13X:
@@ -604,6 +628,7 @@ static int s5m8767_rtc_init_reg(struct s5m_rtc_info *info)
 		ret = regmap_raw_write(info->regmap, S5M_ALARM0_CONF, data, 2);
 		break;
 
+	case S2MPG10:
 	case S2MPS15X:
 	case S2MPS14X:
 	case S2MPS13X:
@@ -634,6 +659,25 @@ static int s5m8767_rtc_init_reg(struct s5m_rtc_info *info)
 	return ret;
 }
 
+static int s5m_rtc_restart_s2mpg10(struct sys_off_data *data)
+{
+	struct s5m_rtc_info *info = data->cb_data;
+	int ret;
+
+	if (data->mode != REBOOT_COLD && data->mode != REBOOT_HARD)
+		return NOTIFY_DONE;
+
+	/*
+	 * Arm watchdog with maximum timeout (2 seconds), and perform full reset
+	 * on expiry.
+	 */
+	ret = regmap_set_bits(info->regmap, S2MPG10_RTC_WTSR,
+			      (S2MPG10_WTSR_COLDTIMER | S2MPG10_WTSR_COLDRST
+			       | S2MPG10_WTSR_WTSRT | S2MPG10_WTSR_WTSR_EN));
+
+	return ret ? NOTIFY_BAD : NOTIFY_DONE;
+}
+
 static int s5m_rtc_probe(struct platform_device *pdev)
 {
 	struct sec_pmic_dev *s5m87xx = dev_get_drvdata(pdev->dev.parent);
@@ -689,6 +733,9 @@ static int s5m_rtc_probe(struct platform_device *pdev)
 		if (IS_ERR(info->regmap))
 			return dev_err_probe(&pdev->dev, PTR_ERR(info->regmap),
 					     "Failed to allocate regmap\n");
+	} else if (id->driver_data == S2MPG10) {
+		info->regs = &s2mpg10_rtc_regs;
+		alarm_irq = S2MPG10_IRQ_RTCA0;
 	} else {
 		return dev_err_probe(&pdev->dev, -ENODEV,
 				     "Unsupported device type %lu\n",
@@ -735,6 +782,18 @@ static int s5m_rtc_probe(struct platform_device *pdev)
 		device_init_wakeup(&pdev->dev, true);
 	}
 
+	if (of_device_is_system_power_controller(pdev->dev.parent->of_node) &&
+	    info->device_type == S2MPG10) {
+		ret = devm_register_sys_off_handler(&pdev->dev,
+						    SYS_OFF_MODE_RESTART,
+						    SYS_OFF_PRIO_HIGH + 1,
+						    s5m_rtc_restart_s2mpg10,
+						    info);
+		if (ret)
+			return dev_err_probe(&pdev->dev, ret,
+				       "Failed to register restart handler\n");
+	}
+
 	return devm_rtc_register_device(info->rtc_dev);
 }
 
@@ -766,6 +825,7 @@ static SIMPLE_DEV_PM_OPS(s5m_rtc_pm_ops, s5m_rtc_suspend, s5m_rtc_resume);
 
 static const struct platform_device_id s5m_rtc_id[] = {
 	{ "s5m-rtc",		S5M8767X },
+	{ "s2mpg10-rtc",	S2MPG10 },
 	{ "s2mps13-rtc",	S2MPS13X },
 	{ "s2mps14-rtc",	S2MPS14X },
 	{ "s2mps15-rtc",	S2MPS15X },

-- 
2.49.0.472.ge94155a9ec-goog

[PATCH v2 28/32] rtc: s5m: fix a typo: peding -> pending

[André Draszik]

Fix this minor typo, and adjust the a related incorrect alignment to
avoid a checkpatch error.

Signed-off-by: André Draszik <andre.draszik@linaro.org>
---
 drivers/rtc/rtc-s5m.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/rtc/rtc-s5m.c b/drivers/rtc/rtc-s5m.c
index 0d8783577bab4f4ebe61050dbd68387d970773bd..7b00e65bdd9c25b3426f92355f8ea36e66c3939f 100644
--- a/drivers/rtc/rtc-s5m.c
+++ b/drivers/rtc/rtc-s5m.c
@@ -243,8 +243,8 @@ static int s5m8767_wait_for_udr_update(struct s5m_rtc_info *info)
 	return ret;
 }
 
-static int s5m_check_peding_alarm_interrupt(struct s5m_rtc_info *info,
-		struct rtc_wkalrm *alarm)
+static int s5m_check_pending_alarm_interrupt(struct s5m_rtc_info *info,
+					     struct rtc_wkalrm *alarm)
 {
 	int ret;
 	unsigned int val;
@@ -451,7 +451,7 @@ static int s5m_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 
 	dev_dbg(dev, "%s: %ptR(%d)\n", __func__, &alrm->time, alrm->time.tm_wday);
 
-	return s5m_check_peding_alarm_interrupt(info, alrm);
+	return s5m_check_pending_alarm_interrupt(info, alrm);
 }
 
 static int s5m_rtc_stop_alarm(struct s5m_rtc_info *info)

-- 
2.49.0.472.ge94155a9ec-goog

[PATCH v2 29/32] rtc: s5m: switch to devm_device_init_wakeup

[André Draszik]

To release memory allocated by device_init_wakeup(true), drivers have
to call device_init_wakeup(false) in error paths and unbind.

Switch to the new devres managed version devm_device_init_wakeup() to
plug this memleak.

Signed-off-by: André Draszik <andre.draszik@linaro.org>
---
 drivers/rtc/rtc-s5m.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/rtc/rtc-s5m.c b/drivers/rtc/rtc-s5m.c
index 7b00e65bdd9c25b3426f92355f8ea36e66c3939f..e8e442c503064eb4e570af5bf7dcff6bfa7f4656 100644
--- a/drivers/rtc/rtc-s5m.c
+++ b/drivers/rtc/rtc-s5m.c
@@ -779,7 +779,11 @@ static int s5m_rtc_probe(struct platform_device *pdev)
 			return dev_err_probe(&pdev->dev, ret,
 					     "Failed to request alarm IRQ %d\n",
 					     info->irq);
-		device_init_wakeup(&pdev->dev, true);
+
+		ret = devm_device_init_wakeup(&pdev->dev);
+		if (ret < 0)
+			return dev_err_probe(&pdev->dev, ret,
+					     "Failed to init wakeup\n");
 	}
 
 	if (of_device_is_system_power_controller(pdev->dev.parent->of_node) &&

-- 
2.49.0.472.ge94155a9ec-goog

[PATCH v2 30/32] rtc: s5m: replace regmap_update_bits with regmap_clear/set_bits

[André Draszik]

The regmap_clear_bits() and regmap_set_bits() helper macros state the
intention a bit more obviously.

Use those.

Signed-off-by: André Draszik <andre.draszik@linaro.org>
---
 drivers/rtc/rtc-s5m.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/drivers/rtc/rtc-s5m.c b/drivers/rtc/rtc-s5m.c
index e8e442c503064eb4e570af5bf7dcff6bfa7f4656..fb65a8e439d72d9070751c00f5826a403ac0b416 100644
--- a/drivers/rtc/rtc-s5m.c
+++ b/drivers/rtc/rtc-s5m.c
@@ -338,8 +338,8 @@ static int s5m8767_rtc_set_alarm_reg(struct s5m_rtc_info *info)
 
 	/* On S2MPS13 the AUDR is not auto-cleared */
 	if (info->device_type == S2MPS13X)
-		regmap_update_bits(info->regmap, info->regs->udr_update,
-				   S2MPS13_RTC_AUDR_MASK, 0);
+		regmap_clear_bits(info->regmap, info->regs->udr_update,
+				  S2MPS13_RTC_AUDR_MASK);
 
 	return ret;
 }
@@ -351,10 +351,8 @@ static int s5m_rtc_read_time(struct device *dev, struct rtc_time *tm)
 	int ret;
 
 	if (info->regs->read_time_udr_mask) {
-		ret = regmap_update_bits(info->regmap,
-				info->regs->udr_update,
-				info->regs->read_time_udr_mask,
-				info->regs->read_time_udr_mask);
+		ret = regmap_set_bits(info->regmap, info->regs->udr_update,
+				      info->regs->read_time_udr_mask);
 		if (ret) {
 			dev_err(dev,
 				"Failed to prepare registers for time reading: %d\n",

-- 
2.49.0.472.ge94155a9ec-goog

[PATCH v2 31/32] rtc: s5m: replace open-coded read/modify/write registers with regmap helpers

[André Draszik]

Instead of the open-coded read/modify/write sequence, we can simply use
the regmap helpers regmap_set_bits() and regmap_update_bits()
respectively.

This makes the code easier to read, and avoids extra work in case the
underlying bus supports updating bits via
struct regmap_bus::reg_update_bits() directly (which is the case for
S2MPG10 on gs101 where this driver communicates via ACPM).

Signed-off-by: André Draszik <andre.draszik@linaro.org>
---
 drivers/rtc/rtc-s5m.c | 28 +++++++---------------------
 1 file changed, 7 insertions(+), 21 deletions(-)

diff --git a/drivers/rtc/rtc-s5m.c b/drivers/rtc/rtc-s5m.c
index fb65a8e439d72d9070751c00f5826a403ac0b416..2ad01fb3bc72fe9259a8307584c9cf3a839bd492 100644
--- a/drivers/rtc/rtc-s5m.c
+++ b/drivers/rtc/rtc-s5m.c
@@ -279,17 +279,9 @@ static int s5m_check_pending_alarm_interrupt(struct s5m_rtc_info *info,
 static int s5m8767_rtc_set_time_reg(struct s5m_rtc_info *info)
 {
 	int ret;
-	unsigned int data;
-
-	ret = regmap_read(info->regmap, info->regs->udr_update, &data);
-	if (ret < 0) {
-		dev_err(info->dev, "failed to read update reg(%d)\n", ret);
-		return ret;
-	}
-
-	data |= info->regs->write_time_udr_mask;
 
-	ret = regmap_write(info->regmap, info->regs->udr_update, data);
+	ret = regmap_set_bits(info->regmap, info->regs->udr_update,
+			      info->regs->write_time_udr_mask);
 	if (ret < 0) {
 		dev_err(info->dev, "failed to write update reg(%d)\n", ret);
 		return ret;
@@ -303,19 +295,12 @@ static int s5m8767_rtc_set_time_reg(struct s5m_rtc_info *info)
 static int s5m8767_rtc_set_alarm_reg(struct s5m_rtc_info *info)
 {
 	int ret;
-	unsigned int data;
-
-	ret = regmap_read(info->regmap, info->regs->udr_update, &data);
-	if (ret < 0) {
-		dev_err(info->dev, "%s: fail to read update reg(%d)\n",
-			__func__, ret);
-		return ret;
-	}
+	unsigned int udr_mask;
 
-	data |= info->regs->write_alarm_udr_mask;
+	udr_mask = info->regs->write_alarm_udr_mask;
 	switch (info->device_type) {
 	case S5M8767X:
-		data &= ~S5M_RTC_TIME_EN_MASK;
+		udr_mask |= S5M_RTC_TIME_EN_MASK;
 		break;
 	case S2MPG10:
 	case S2MPS15X:
@@ -327,7 +312,8 @@ static int s5m8767_rtc_set_alarm_reg(struct s5m_rtc_info *info)
 		return -EINVAL;
 	}
 
-	ret = regmap_write(info->regmap, info->regs->udr_update, data);
+	ret = regmap_update_bits(info->regmap, info->regs->udr_update,
+				 udr_mask, info->regs->write_alarm_udr_mask);
 	if (ret < 0) {
 		dev_err(info->dev, "%s: fail to write update reg(%d)\n",
 			__func__, ret);

-- 
2.49.0.472.ge94155a9ec-goog

[PATCH v2 32/32] MAINTAINERS: add myself as reviewer for Samsung S2M MFD

[André Draszik]

I'm working on a Samsung device which includes this MFD and would like
to be Cc'ed to further contributions and help on reviewing them. Add me
as reviewer.

Signed-off-by: André Draszik <andre.draszik@linaro.org>
---
 MAINTAINERS | 1 +
 1 file changed, 1 insertion(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index d4d577b54d798938b7a8ff0c2bdbd0b61f87650f..9f05af52b062d8cab0f8b48b2625432108604c3e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -21397,6 +21397,7 @@ F:	drivers/platform/x86/samsung-laptop.c
 
 SAMSUNG MULTIFUNCTION PMIC DEVICE DRIVERS
 M:	Krzysztof Kozlowski <krzk@kernel.org>
+R:	André Draszik <andre.draszik@linaro.org>
 L:	linux-kernel@vger.kernel.org
 L:	linux-samsung-soc@vger.kernel.org
 S:	Maintained

-- 
2.49.0.472.ge94155a9ec-goog

Re: [PATCH v2 00/32] Samsung S2MPG10 PMIC MFD-based drivers

[André Draszik]

On Fri, 2025-03-28 at 13:28 +0000, André Draszik wrote:
> This series adds initial support for the Samsung S2MPG10 PMIC using the
> MFD framework. This is a PMIC for mobile applications and is used on
> the Google Pixel 6 and 6 Pro (oriole / raven).
> 
> *** dependency note ***
> 
> To compile, this depends on the Samsung ACPM driver in Linux next with
> the following additional patches:
> https://lore.kernel.org/all/20250321-acpm-atomic-v1-0-fb887bde7e61@linaro.org/

There's a v2 of that one:
https://lore.kernel.org/all/20250324-acpm-atomic-v2-0-7d87746e1765@linaro.org/

other than that, everything else still stands.

> https://lore.kernel.org/all/20250319-acpm-fixes-v2-0-ac2c1bcf322b@linaro.org/
> https://lore.kernel.org/all/20250327-acpm-children-v1-0-0afe15ee2ff7@linaro.org/
> 
> *** dependency note end ***

Cheers,
Andre'

Re: [PATCH v2 01/32] dt-bindings: mfd: samsung,s2mps11: add s2mpg10

[Krzysztof Kozlowski]

On Fri, Mar 28, 2025 at 01:28:47PM +0000, André Draszik wrote:
>  allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: samsung,s2mpg10-pmic
> +    then:
> +      properties:
> +        reg: false
> +        samsung,s2mps11-acokb-ground: false
> +        samsung,s2mps11-wrstbi-ground: false
> +
> +      oneOf:
> +        - required: [interrupts]
> +        - required: [interrupts-extended]

Drop, you should require only interrupts.

OTOH, why regulators subnode is not needed? Commit msg mentions they
exist, so they should be required. Binding does not change because you
added or did not add yet some driver support.

Best regards,
Krzysztof

Re: [PATCH v2 03/32] dt-bindings: firmware: google,gs101-acpm-ipc: add PMIC child node

[Krzysztof Kozlowski]

On Fri, Mar 28, 2025 at 01:28:49PM +0000, André Draszik wrote:
> The PMIC is supposed to be a child of ACPM, add it here to describe the
> connection.
> 
> Signed-off-by: André Draszik <andre.draszik@linaro.org>
> ---
>  .../bindings/firmware/google,gs101-acpm-ipc.yaml        | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/firmware/google,gs101-acpm-ipc.yaml b/Documentation/devicetree/bindings/firmware/google,gs101-acpm-ipc.yaml
> index 2cdad1bbae73bb1795eccf47e1a58e270acd022c..5524f2af5bda2d29b5113f8fe14ece7f02366a60 100644
> --- a/Documentation/devicetree/bindings/firmware/google,gs101-acpm-ipc.yaml
> +++ b/Documentation/devicetree/bindings/firmware/google,gs101-acpm-ipc.yaml
> @@ -27,6 +27,16 @@ properties:
>    mboxes:
>      maxItems: 1
>  
> +  pmic:
> +    description: Child node describing the main PMIC.
> +    type: object
> +    $ref: /schemas/mfd/samsung,s2mps11.yaml
> +    unevaluatedProperties: false

Drop these two and use "additionalProperties: true".
> +
> +    properties:
> +      compatible:
> +        const: samsung,s2mpg10-pmic

Best regards,
Krzysztof

Re: [PATCH v2 01/32] dt-bindings: mfd: samsung,s2mps11: add s2mpg10

[André Draszik]

Hi Krzysztof,

On Mon, 2025-03-31 at 09:34 +0200, Krzysztof Kozlowski wrote:
> On Fri, Mar 28, 2025 at 01:28:47PM +0000, André Draszik wrote:
> >  allOf:
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          contains:
> > +            const: samsung,s2mpg10-pmic
> > +    then:
> > +      properties:
> > +        reg: false
> > +        samsung,s2mps11-acokb-ground: false
> > +        samsung,s2mps11-wrstbi-ground: false
> > +
> > +      oneOf:
> > +        - required: [interrupts]
> > +        - required: [interrupts-extended]
> 
> Drop, you should require only interrupts.

As mentioned in the commit message comments, it doesn't work with
just interrupts. It appears that dtschema's fixups.py doesn't
handle this case. With just interrupts, DT validation will fail
if the DT uses interrupts-extended. There was at least one other
binding that specified interrupts in the same way, so I went with
the same approach.

> OTOH, why regulators subnode is not needed? Commit msg mentions they
> exist, so they should be required. Binding does not change because you
> added or did not add yet some driver support.

I wanted to avoid DT validation errors, because we haven't started
working on regulators yet, and it might take a little while until
everything is in place.

I'll make it required in the next version.

Thanks!

Andre'

Re: [PATCH v2 01/32] dt-bindings: mfd: samsung,s2mps11: add s2mpg10

[Krzysztof Kozlowski]

On 31/03/2025 11:50, André Draszik wrote:
> Hi Krzysztof,
> 
> On Mon, 2025-03-31 at 09:34 +0200, Krzysztof Kozlowski wrote:
>> On Fri, Mar 28, 2025 at 01:28:47PM +0000, André Draszik wrote:
>>>  allOf:
>>> +  - if:
>>> +      properties:
>>> +        compatible:
>>> +          contains:
>>> +            const: samsung,s2mpg10-pmic
>>> +    then:
>>> +      properties:
>>> +        reg: false
>>> +        samsung,s2mps11-acokb-ground: false
>>> +        samsung,s2mps11-wrstbi-ground: false
>>> +
>>> +      oneOf:
>>> +        - required: [interrupts]
>>> +        - required: [interrupts-extended]
>>
>> Drop, you should require only interrupts.
> 
> As mentioned in the commit message comments, it doesn't work with
> just interrupts. It appears that dtschema's fixups.py doesn't
> handle this case. With just interrupts, DT validation will fail
> if the DT uses interrupts-extended. There was at least one other
> binding that specified interrupts in the same way, so I went with
> the same approach.

Please add a comment about this above oneOf.


Best regards,
Krzysztof