From: Eric Biggers <ebiggers@kernel.org>
To: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, x86@kernel.org
Subject: [PATCH v2 5/9] crypto: x86/camellia - stop using the SIMD helper
Date: Tue, 1 Apr 2025 17:24:05 -0700 [thread overview]
Message-ID: <20250402002420.89233-6-ebiggers@kernel.org> (raw)
In-Reply-To: <20250402002420.89233-1-ebiggers@kernel.org>
From: Eric Biggers <ebiggers@google.com>
Stop wrapping skcipher and aead algorithms with the crypto SIMD helper
(crypto/simd.c). The only purpose of doing so was to work around x86
not always supporting kernel-mode FPU in softirqs. Specifically, if a
hardirq interrupted a task context kernel-mode FPU section and then a
softirqs were run at the end of that hardirq, those softirqs could not
use kernel-mode FPU. This has now been fixed. In combination with the
fact that the skcipher and aead APIs only support task and softirq
contexts, these can now just use kernel-mode FPU unconditionally on x86.
This simplifies the code and improves performance.
Signed-off-by: Eric Biggers <ebiggers@google.com>
---
arch/x86/crypto/Kconfig | 1 -
arch/x86/crypto/camellia_aesni_avx2_glue.c | 21 +++++++--------------
arch/x86/crypto/camellia_aesni_avx_glue.c | 21 +++++++--------------
3 files changed, 14 insertions(+), 29 deletions(-)
diff --git a/arch/x86/crypto/Kconfig b/arch/x86/crypto/Kconfig
index ad00d53ab83d8..de927df89ccf1 100644
--- a/arch/x86/crypto/Kconfig
+++ b/arch/x86/crypto/Kconfig
@@ -61,11 +61,10 @@ config CRYPTO_CAMELLIA_X86_64
config CRYPTO_CAMELLIA_AESNI_AVX_X86_64
tristate "Ciphers: Camellia with modes: ECB, CBC (AES-NI/AVX)"
depends on X86 && 64BIT
select CRYPTO_SKCIPHER
select CRYPTO_CAMELLIA_X86_64
- select CRYPTO_SIMD
imply CRYPTO_XTS
help
Length-preserving ciphers: Camellia with ECB and CBC modes
Architecture: x86_64 using:
diff --git a/arch/x86/crypto/camellia_aesni_avx2_glue.c b/arch/x86/crypto/camellia_aesni_avx2_glue.c
index e7e4d64e9577e..2d2f4e16537c4 100644
--- a/arch/x86/crypto/camellia_aesni_avx2_glue.c
+++ b/arch/x86/crypto/camellia_aesni_avx2_glue.c
@@ -4,11 +4,10 @@
*
* Copyright © 2013 Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
*/
#include <crypto/algapi.h>
-#include <crypto/internal/simd.h>
#include <linux/crypto.h>
#include <linux/err.h>
#include <linux/module.h>
#include <linux/types.h>
@@ -67,27 +66,25 @@ static int cbc_decrypt(struct skcipher_request *req)
CBC_WALK_END();
}
static struct skcipher_alg camellia_algs[] = {
{
- .base.cra_name = "__ecb(camellia)",
- .base.cra_driver_name = "__ecb-camellia-aesni-avx2",
+ .base.cra_name = "ecb(camellia)",
+ .base.cra_driver_name = "ecb-camellia-aesni-avx2",
.base.cra_priority = 500,
- .base.cra_flags = CRYPTO_ALG_INTERNAL,
.base.cra_blocksize = CAMELLIA_BLOCK_SIZE,
.base.cra_ctxsize = sizeof(struct camellia_ctx),
.base.cra_module = THIS_MODULE,
.min_keysize = CAMELLIA_MIN_KEY_SIZE,
.max_keysize = CAMELLIA_MAX_KEY_SIZE,
.setkey = camellia_setkey,
.encrypt = ecb_encrypt,
.decrypt = ecb_decrypt,
}, {
- .base.cra_name = "__cbc(camellia)",
- .base.cra_driver_name = "__cbc-camellia-aesni-avx2",
+ .base.cra_name = "cbc(camellia)",
+ .base.cra_driver_name = "cbc-camellia-aesni-avx2",
.base.cra_priority = 500,
- .base.cra_flags = CRYPTO_ALG_INTERNAL,
.base.cra_blocksize = CAMELLIA_BLOCK_SIZE,
.base.cra_ctxsize = sizeof(struct camellia_ctx),
.base.cra_module = THIS_MODULE,
.min_keysize = CAMELLIA_MIN_KEY_SIZE,
.max_keysize = CAMELLIA_MAX_KEY_SIZE,
@@ -96,12 +93,10 @@ static struct skcipher_alg camellia_algs[] = {
.encrypt = cbc_encrypt,
.decrypt = cbc_decrypt,
},
};
-static struct simd_skcipher_alg *camellia_simd_algs[ARRAY_SIZE(camellia_algs)];
-
static int __init camellia_aesni_init(void)
{
const char *feature_name;
if (!boot_cpu_has(X86_FEATURE_AVX) ||
@@ -116,19 +111,17 @@ static int __init camellia_aesni_init(void)
&feature_name)) {
pr_info("CPU feature '%s' is not supported.\n", feature_name);
return -ENODEV;
}
- return simd_register_skciphers_compat(camellia_algs,
- ARRAY_SIZE(camellia_algs),
- camellia_simd_algs);
+ return crypto_register_skciphers(camellia_algs,
+ ARRAY_SIZE(camellia_algs));
}
static void __exit camellia_aesni_fini(void)
{
- simd_unregister_skciphers(camellia_algs, ARRAY_SIZE(camellia_algs),
- camellia_simd_algs);
+ crypto_unregister_skciphers(camellia_algs, ARRAY_SIZE(camellia_algs));
}
module_init(camellia_aesni_init);
module_exit(camellia_aesni_fini);
diff --git a/arch/x86/crypto/camellia_aesni_avx_glue.c b/arch/x86/crypto/camellia_aesni_avx_glue.c
index c7ccf63e741e1..a7d1623881424 100644
--- a/arch/x86/crypto/camellia_aesni_avx_glue.c
+++ b/arch/x86/crypto/camellia_aesni_avx_glue.c
@@ -4,11 +4,10 @@
*
* Copyright © 2012-2013 Jussi Kivilinna <jussi.kivilinna@iki.fi>
*/
#include <crypto/algapi.h>
-#include <crypto/internal/simd.h>
#include <linux/crypto.h>
#include <linux/err.h>
#include <linux/module.h>
#include <linux/types.h>
@@ -67,27 +66,25 @@ static int cbc_decrypt(struct skcipher_request *req)
CBC_WALK_END();
}
static struct skcipher_alg camellia_algs[] = {
{
- .base.cra_name = "__ecb(camellia)",
- .base.cra_driver_name = "__ecb-camellia-aesni",
+ .base.cra_name = "ecb(camellia)",
+ .base.cra_driver_name = "ecb-camellia-aesni",
.base.cra_priority = 400,
- .base.cra_flags = CRYPTO_ALG_INTERNAL,
.base.cra_blocksize = CAMELLIA_BLOCK_SIZE,
.base.cra_ctxsize = sizeof(struct camellia_ctx),
.base.cra_module = THIS_MODULE,
.min_keysize = CAMELLIA_MIN_KEY_SIZE,
.max_keysize = CAMELLIA_MAX_KEY_SIZE,
.setkey = camellia_setkey,
.encrypt = ecb_encrypt,
.decrypt = ecb_decrypt,
}, {
- .base.cra_name = "__cbc(camellia)",
- .base.cra_driver_name = "__cbc-camellia-aesni",
+ .base.cra_name = "cbc(camellia)",
+ .base.cra_driver_name = "cbc-camellia-aesni",
.base.cra_priority = 400,
- .base.cra_flags = CRYPTO_ALG_INTERNAL,
.base.cra_blocksize = CAMELLIA_BLOCK_SIZE,
.base.cra_ctxsize = sizeof(struct camellia_ctx),
.base.cra_module = THIS_MODULE,
.min_keysize = CAMELLIA_MIN_KEY_SIZE,
.max_keysize = CAMELLIA_MAX_KEY_SIZE,
@@ -96,12 +93,10 @@ static struct skcipher_alg camellia_algs[] = {
.encrypt = cbc_encrypt,
.decrypt = cbc_decrypt,
}
};
-static struct simd_skcipher_alg *camellia_simd_algs[ARRAY_SIZE(camellia_algs)];
-
static int __init camellia_aesni_init(void)
{
const char *feature_name;
if (!boot_cpu_has(X86_FEATURE_AVX) ||
@@ -115,19 +110,17 @@ static int __init camellia_aesni_init(void)
&feature_name)) {
pr_info("CPU feature '%s' is not supported.\n", feature_name);
return -ENODEV;
}
- return simd_register_skciphers_compat(camellia_algs,
- ARRAY_SIZE(camellia_algs),
- camellia_simd_algs);
+ return crypto_register_skciphers(camellia_algs,
+ ARRAY_SIZE(camellia_algs));
}
static void __exit camellia_aesni_fini(void)
{
- simd_unregister_skciphers(camellia_algs, ARRAY_SIZE(camellia_algs),
- camellia_simd_algs);
+ crypto_unregister_skciphers(camellia_algs, ARRAY_SIZE(camellia_algs));
}
module_init(camellia_aesni_init);
module_exit(camellia_aesni_fini);
--
2.49.0
next prev parent reply other threads:[~2025-04-02 0:24 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-02 0:24 [PATCH v2 0/9] crypto: x86 - stop using the SIMD helper Eric Biggers
2025-04-02 0:24 ` [PATCH v2 1/9] crypto: x86/aes - drop the avx10_256 AES-XTS and AES-CTR code Eric Biggers
2025-04-02 0:24 ` [PATCH v2 2/9] crypto: x86/aegis - stop using the SIMD helper Eric Biggers
2025-04-02 0:24 ` [PATCH v2 3/9] crypto: x86/aes " Eric Biggers
2025-04-02 0:24 ` [PATCH v2 4/9] crypto: x86/aria " Eric Biggers
2025-04-02 0:24 ` Eric Biggers [this message]
2025-04-02 0:24 ` [PATCH v2 6/9] crypto: x86/cast " Eric Biggers
2025-04-02 0:24 ` [PATCH v2 7/9] crypto: x86/serpent " Eric Biggers
2025-04-02 0:24 ` [PATCH v2 8/9] crypto: x86/sm4 " Eric Biggers
2025-04-02 0:24 ` [PATCH v2 9/9] crypto: x86/twofish " Eric Biggers
2025-04-02 3:14 ` [PATCH v2 0/9] crypto: x86 " Herbert Xu
2025-04-02 6:31 ` Ard Biesheuvel
2025-04-02 6:34 ` Ard Biesheuvel
2025-04-02 8:22 ` Herbert Xu
2025-04-02 17:19 ` Eric Biggers
2025-04-03 1:25 ` Herbert Xu
2025-04-03 2:14 ` Eric Biggers
2025-04-03 2:33 ` [PATCH] crypto: hash - Do not use shash in hard IRQs Herbert Xu
2025-04-03 2:56 ` [PATCH v2 0/9] crypto: x86 - stop using the SIMD helper Herbert Xu
2025-04-03 3:20 ` Eric Biggers
2025-04-03 3:42 ` Banning crypto in hardirq context (was: [PATCH v2 0/9] crypto: x86 - stop using the SIMD helper) Herbert Xu
2025-04-03 3:59 ` Eric Biggers
2025-04-03 4:14 ` [PATCH] crypto: x86/chacha - Remove SIMD fallback path Herbert Xu
2025-04-07 16:48 ` Eric Biggers
2025-04-08 2:12 ` [PATCH] crypto: x86/chacha - Restore SSSE3 " Herbert Xu
2025-04-03 7:03 ` Banning crypto in hardirq context (was: [PATCH v2 0/9] crypto: x86 - stop using the SIMD helper) Ard Biesheuvel
2025-04-07 5:25 ` [PATCH v2 0/9] crypto: x86 - stop using the SIMD helper Herbert Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250402002420.89233-6-ebiggers@kernel.org \
--to=ebiggers@kernel.org \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox