From: Eric Biggers <ebiggers@kernel.org>
To: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, x86@kernel.org
Subject: [PATCH v2 6/9] crypto: x86/cast - stop using the SIMD helper
Date: Tue, 1 Apr 2025 17:24:06 -0700 [thread overview]
Message-ID: <20250402002420.89233-7-ebiggers@kernel.org> (raw)
In-Reply-To: <20250402002420.89233-1-ebiggers@kernel.org>
From: Eric Biggers <ebiggers@google.com>
Stop wrapping skcipher and aead algorithms with the crypto SIMD helper
(crypto/simd.c). The only purpose of doing so was to work around x86
not always supporting kernel-mode FPU in softirqs. Specifically, if a
hardirq interrupted a task context kernel-mode FPU section and then a
softirqs were run at the end of that hardirq, those softirqs could not
use kernel-mode FPU. This has now been fixed. In combination with the
fact that the skcipher and aead APIs only support task and softirq
contexts, these can now just use kernel-mode FPU unconditionally on x86.
This simplifies the code and improves performance.
Signed-off-by: Eric Biggers <ebiggers@google.com>
---
arch/x86/crypto/Kconfig | 2 --
arch/x86/crypto/cast5_avx_glue.c | 21 +++++++--------------
arch/x86/crypto/cast6_avx_glue.c | 20 ++++++--------------
3 files changed, 13 insertions(+), 30 deletions(-)
diff --git a/arch/x86/crypto/Kconfig b/arch/x86/crypto/Kconfig
index de927df89ccf1..55800d1ce668e 100644
--- a/arch/x86/crypto/Kconfig
+++ b/arch/x86/crypto/Kconfig
@@ -86,11 +86,10 @@ config CRYPTO_CAST5_AVX_X86_64
tristate "Ciphers: CAST5 with modes: ECB, CBC (AVX)"
depends on X86 && 64BIT
select CRYPTO_SKCIPHER
select CRYPTO_CAST5
select CRYPTO_CAST_COMMON
- select CRYPTO_SIMD
imply CRYPTO_CTR
help
Length-preserving ciphers: CAST5 (CAST-128) cipher algorithm
(RFC2144) with ECB and CBC modes
@@ -103,11 +102,10 @@ config CRYPTO_CAST6_AVX_X86_64
tristate "Ciphers: CAST6 with modes: ECB, CBC (AVX)"
depends on X86 && 64BIT
select CRYPTO_SKCIPHER
select CRYPTO_CAST6
select CRYPTO_CAST_COMMON
- select CRYPTO_SIMD
imply CRYPTO_XTS
imply CRYPTO_CTR
help
Length-preserving ciphers: CAST6 (CAST-256) cipher algorithm
(RFC2612) with ECB and CBC modes
diff --git a/arch/x86/crypto/cast5_avx_glue.c b/arch/x86/crypto/cast5_avx_glue.c
index 3976a87f92ad5..3aca04d43b34a 100644
--- a/arch/x86/crypto/cast5_avx_glue.c
+++ b/arch/x86/crypto/cast5_avx_glue.c
@@ -6,11 +6,10 @@
* <Johannes.Goetzfried@informatik.stud.uni-erlangen.de>
*/
#include <crypto/algapi.h>
#include <crypto/cast5.h>
-#include <crypto/internal/simd.h>
#include <linux/crypto.h>
#include <linux/err.h>
#include <linux/module.h>
#include <linux/types.h>
@@ -62,27 +61,25 @@ static int cbc_decrypt(struct skcipher_request *req)
CBC_WALK_END();
}
static struct skcipher_alg cast5_algs[] = {
{
- .base.cra_name = "__ecb(cast5)",
- .base.cra_driver_name = "__ecb-cast5-avx",
+ .base.cra_name = "ecb(cast5)",
+ .base.cra_driver_name = "ecb-cast5-avx",
.base.cra_priority = 200,
- .base.cra_flags = CRYPTO_ALG_INTERNAL,
.base.cra_blocksize = CAST5_BLOCK_SIZE,
.base.cra_ctxsize = sizeof(struct cast5_ctx),
.base.cra_module = THIS_MODULE,
.min_keysize = CAST5_MIN_KEY_SIZE,
.max_keysize = CAST5_MAX_KEY_SIZE,
.setkey = cast5_setkey_skcipher,
.encrypt = ecb_encrypt,
.decrypt = ecb_decrypt,
}, {
- .base.cra_name = "__cbc(cast5)",
- .base.cra_driver_name = "__cbc-cast5-avx",
+ .base.cra_name = "cbc(cast5)",
+ .base.cra_driver_name = "cbc-cast5-avx",
.base.cra_priority = 200,
- .base.cra_flags = CRYPTO_ALG_INTERNAL,
.base.cra_blocksize = CAST5_BLOCK_SIZE,
.base.cra_ctxsize = sizeof(struct cast5_ctx),
.base.cra_module = THIS_MODULE,
.min_keysize = CAST5_MIN_KEY_SIZE,
.max_keysize = CAST5_MAX_KEY_SIZE,
@@ -91,31 +88,27 @@ static struct skcipher_alg cast5_algs[] = {
.encrypt = cbc_encrypt,
.decrypt = cbc_decrypt,
}
};
-static struct simd_skcipher_alg *cast5_simd_algs[ARRAY_SIZE(cast5_algs)];
-
static int __init cast5_init(void)
{
const char *feature_name;
if (!cpu_has_xfeatures(XFEATURE_MASK_SSE | XFEATURE_MASK_YMM,
&feature_name)) {
pr_info("CPU feature '%s' is not supported.\n", feature_name);
return -ENODEV;
}
- return simd_register_skciphers_compat(cast5_algs,
- ARRAY_SIZE(cast5_algs),
- cast5_simd_algs);
+ return crypto_register_skciphers(cast5_algs,
+ ARRAY_SIZE(cast5_algs));
}
static void __exit cast5_exit(void)
{
- simd_unregister_skciphers(cast5_algs, ARRAY_SIZE(cast5_algs),
- cast5_simd_algs);
+ crypto_unregister_skciphers(cast5_algs, ARRAY_SIZE(cast5_algs));
}
module_init(cast5_init);
module_exit(cast5_exit);
diff --git a/arch/x86/crypto/cast6_avx_glue.c b/arch/x86/crypto/cast6_avx_glue.c
index 7e2aea3723490..c4dd28c303036 100644
--- a/arch/x86/crypto/cast6_avx_glue.c
+++ b/arch/x86/crypto/cast6_avx_glue.c
@@ -12,11 +12,10 @@
#include <linux/types.h>
#include <linux/crypto.h>
#include <linux/err.h>
#include <crypto/algapi.h>
#include <crypto/cast6.h>
-#include <crypto/internal/simd.h>
#include "ecb_cbc_helpers.h"
#define CAST6_PARALLEL_BLOCKS 8
@@ -62,27 +61,25 @@ static int cbc_decrypt(struct skcipher_request *req)
CBC_WALK_END();
}
static struct skcipher_alg cast6_algs[] = {
{
- .base.cra_name = "__ecb(cast6)",
- .base.cra_driver_name = "__ecb-cast6-avx",
+ .base.cra_name = "ecb(cast6)",
+ .base.cra_driver_name = "ecb-cast6-avx",
.base.cra_priority = 200,
- .base.cra_flags = CRYPTO_ALG_INTERNAL,
.base.cra_blocksize = CAST6_BLOCK_SIZE,
.base.cra_ctxsize = sizeof(struct cast6_ctx),
.base.cra_module = THIS_MODULE,
.min_keysize = CAST6_MIN_KEY_SIZE,
.max_keysize = CAST6_MAX_KEY_SIZE,
.setkey = cast6_setkey_skcipher,
.encrypt = ecb_encrypt,
.decrypt = ecb_decrypt,
}, {
- .base.cra_name = "__cbc(cast6)",
- .base.cra_driver_name = "__cbc-cast6-avx",
+ .base.cra_name = "cbc(cast6)",
+ .base.cra_driver_name = "cbc-cast6-avx",
.base.cra_priority = 200,
- .base.cra_flags = CRYPTO_ALG_INTERNAL,
.base.cra_blocksize = CAST6_BLOCK_SIZE,
.base.cra_ctxsize = sizeof(struct cast6_ctx),
.base.cra_module = THIS_MODULE,
.min_keysize = CAST6_MIN_KEY_SIZE,
.max_keysize = CAST6_MAX_KEY_SIZE,
@@ -91,31 +88,26 @@ static struct skcipher_alg cast6_algs[] = {
.encrypt = cbc_encrypt,
.decrypt = cbc_decrypt,
},
};
-static struct simd_skcipher_alg *cast6_simd_algs[ARRAY_SIZE(cast6_algs)];
-
static int __init cast6_init(void)
{
const char *feature_name;
if (!cpu_has_xfeatures(XFEATURE_MASK_SSE | XFEATURE_MASK_YMM,
&feature_name)) {
pr_info("CPU feature '%s' is not supported.\n", feature_name);
return -ENODEV;
}
- return simd_register_skciphers_compat(cast6_algs,
- ARRAY_SIZE(cast6_algs),
- cast6_simd_algs);
+ return crypto_register_skciphers(cast6_algs, ARRAY_SIZE(cast6_algs));
}
static void __exit cast6_exit(void)
{
- simd_unregister_skciphers(cast6_algs, ARRAY_SIZE(cast6_algs),
- cast6_simd_algs);
+ crypto_unregister_skciphers(cast6_algs, ARRAY_SIZE(cast6_algs));
}
module_init(cast6_init);
module_exit(cast6_exit);
--
2.49.0
next prev parent reply other threads:[~2025-04-02 0:24 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-02 0:24 [PATCH v2 0/9] crypto: x86 - stop using the SIMD helper Eric Biggers
2025-04-02 0:24 ` [PATCH v2 1/9] crypto: x86/aes - drop the avx10_256 AES-XTS and AES-CTR code Eric Biggers
2025-04-02 0:24 ` [PATCH v2 2/9] crypto: x86/aegis - stop using the SIMD helper Eric Biggers
2025-04-02 0:24 ` [PATCH v2 3/9] crypto: x86/aes " Eric Biggers
2025-04-02 0:24 ` [PATCH v2 4/9] crypto: x86/aria " Eric Biggers
2025-04-02 0:24 ` [PATCH v2 5/9] crypto: x86/camellia " Eric Biggers
2025-04-02 0:24 ` Eric Biggers [this message]
2025-04-02 0:24 ` [PATCH v2 7/9] crypto: x86/serpent " Eric Biggers
2025-04-02 0:24 ` [PATCH v2 8/9] crypto: x86/sm4 " Eric Biggers
2025-04-02 0:24 ` [PATCH v2 9/9] crypto: x86/twofish " Eric Biggers
2025-04-02 3:14 ` [PATCH v2 0/9] crypto: x86 " Herbert Xu
2025-04-02 6:31 ` Ard Biesheuvel
2025-04-02 6:34 ` Ard Biesheuvel
2025-04-02 8:22 ` Herbert Xu
2025-04-02 17:19 ` Eric Biggers
2025-04-03 1:25 ` Herbert Xu
2025-04-03 2:14 ` Eric Biggers
2025-04-03 2:33 ` [PATCH] crypto: hash - Do not use shash in hard IRQs Herbert Xu
2025-04-03 2:56 ` [PATCH v2 0/9] crypto: x86 - stop using the SIMD helper Herbert Xu
2025-04-03 3:20 ` Eric Biggers
2025-04-03 3:42 ` Banning crypto in hardirq context (was: [PATCH v2 0/9] crypto: x86 - stop using the SIMD helper) Herbert Xu
2025-04-03 3:59 ` Eric Biggers
2025-04-03 4:14 ` [PATCH] crypto: x86/chacha - Remove SIMD fallback path Herbert Xu
2025-04-07 16:48 ` Eric Biggers
2025-04-08 2:12 ` [PATCH] crypto: x86/chacha - Restore SSSE3 " Herbert Xu
2025-04-03 7:03 ` Banning crypto in hardirq context (was: [PATCH v2 0/9] crypto: x86 - stop using the SIMD helper) Ard Biesheuvel
2025-04-07 5:25 ` [PATCH v2 0/9] crypto: x86 - stop using the SIMD helper Herbert Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250402002420.89233-7-ebiggers@kernel.org \
--to=ebiggers@kernel.org \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox