public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Ingo Molnar <mingo@kernel.org>
To: linux-kernel@vger.kernel.org
Cc: Andy Lutomirski <luto@kernel.org>,
	Rik van Riel <riel@surriel.com>,
	"H . Peter Anvin" <hpa@zytor.com>,
	Peter Zijlstra <peterz@infradead.org>,
	Linus Torvalds <torvalds@linux-foundation.org>,
	Andrew Morton <akpm@linux-foundation.org>,
	Ingo Molnar <mingo@kernel.org>
Subject: [PATCH 3/7] x86/mm: Make use_/unuse_temporary_mm() non-static
Date: Wed,  2 Apr 2025 11:45:36 +0200	[thread overview]
Message-ID: <20250402094540.3586683-4-mingo@kernel.org> (raw)
In-Reply-To: <20250402094540.3586683-1-mingo@kernel.org>

From: Andy Lutomirski <luto@kernel.org>

This prepares them for use outside of the alternative machinery.
The code is unchanged.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20241119163035.533822339@infradead.org
---
 arch/x86/include/asm/mmu_context.h |  3 ++
 arch/x86/kernel/alternative.c      | 64 --------------------------------------
 arch/x86/mm/tlb.c                  | 64 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 67 insertions(+), 64 deletions(-)

diff --git a/arch/x86/include/asm/mmu_context.h b/arch/x86/include/asm/mmu_context.h
index 2398058b6e83..b103e1709a67 100644
--- a/arch/x86/include/asm/mmu_context.h
+++ b/arch/x86/include/asm/mmu_context.h
@@ -272,4 +272,7 @@ unsigned long __get_current_cr3_fast(void);
 
 #include <asm-generic/mmu_context.h>
 
+extern struct mm_struct *use_temporary_mm(struct mm_struct *temp_mm);
+extern void unuse_temporary_mm(struct mm_struct *mm, struct mm_struct *prev_mm);
+
 #endif /* _ASM_X86_MMU_CONTEXT_H */
diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
index cfffcb80f564..25abadaf8751 100644
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -2111,73 +2111,9 @@ void __init_or_module text_poke_early(void *addr, const void *opcode,
 	}
 }
 
-/*
- * Using a temporary mm allows to set temporary mappings that are not accessible
- * by other CPUs. Such mappings are needed to perform sensitive memory writes
- * that override the kernel memory protections (e.g., W^X), without exposing the
- * temporary page-table mappings that are required for these write operations to
- * other CPUs. Using a temporary mm also allows to avoid TLB shootdowns when the
- * mapping is torn down.
- *
- * Context: The temporary mm needs to be used exclusively by a single core. To
- *          harden security IRQs must be disabled while the temporary mm is
- *          loaded, thereby preventing interrupt handler bugs from overriding
- *          the kernel memory protection.
- */
-static inline struct mm_struct *use_temporary_mm(struct mm_struct *temp_mm)
-{
-	struct mm_struct *prev_mm;
-
-	lockdep_assert_irqs_disabled();
-
-	/*
-	 * Make sure not to be in TLB lazy mode, as otherwise we'll end up
-	 * with a stale address space WITHOUT being in lazy mode after
-	 * restoring the previous mm.
-	 */
-	if (this_cpu_read(cpu_tlbstate_shared.is_lazy))
-		leave_mm();
-
-	prev_mm = this_cpu_read(cpu_tlbstate.loaded_mm);
-	switch_mm_irqs_off(NULL, temp_mm, current);
-
-	/*
-	 * If breakpoints are enabled, disable them while the temporary mm is
-	 * used. Userspace might set up watchpoints on addresses that are used
-	 * in the temporary mm, which would lead to wrong signals being sent or
-	 * crashes.
-	 *
-	 * Note that breakpoints are not disabled selectively, which also causes
-	 * kernel breakpoints (e.g., perf's) to be disabled. This might be
-	 * undesirable, but still seems reasonable as the code that runs in the
-	 * temporary mm should be short.
-	 */
-	if (hw_breakpoint_active())
-		hw_breakpoint_disable();
-
-	return prev_mm;
-}
-
 __ro_after_init struct mm_struct *text_poke_mm;
 __ro_after_init unsigned long text_poke_mm_addr;
 
-static inline void unuse_temporary_mm(struct mm_struct *mm, struct mm_struct *prev_mm)
-{
-	lockdep_assert_irqs_disabled();
-
-	switch_mm_irqs_off(NULL, prev_mm, current);
-
-	/* Clear the cpumask, to indicate no TLB flushing is needed anywhere */
-	cpumask_clear_cpu(raw_smp_processor_id(), mm_cpumask(mm));
-
-	/*
-	 * Restore the breakpoints if they were disabled before the temporary mm
-	 * was loaded.
-	 */
-	if (hw_breakpoint_active())
-		hw_breakpoint_restore();
-}
-
 static void text_poke_memcpy(void *dst, const void *src, size_t len)
 {
 	memcpy(dst, src, len);
diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c
index 0925768d00cb..06a1ad39be74 100644
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -972,6 +972,70 @@ void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
 	this_cpu_write(cpu_tlbstate_shared.is_lazy, true);
 }
 
+/*
+ * Using a temporary mm allows to set temporary mappings that are not accessible
+ * by other CPUs. Such mappings are needed to perform sensitive memory writes
+ * that override the kernel memory protections (e.g., W^X), without exposing the
+ * temporary page-table mappings that are required for these write operations to
+ * other CPUs. Using a temporary mm also allows to avoid TLB shootdowns when the
+ * mapping is torn down.
+ *
+ * Context: The temporary mm needs to be used exclusively by a single core. To
+ *          harden security IRQs must be disabled while the temporary mm is
+ *          loaded, thereby preventing interrupt handler bugs from overriding
+ *          the kernel memory protection.
+ */
+struct mm_struct *use_temporary_mm(struct mm_struct *temp_mm)
+{
+	struct mm_struct *prev_mm;
+
+	lockdep_assert_irqs_disabled();
+
+	/*
+	 * Make sure not to be in TLB lazy mode, as otherwise we'll end up
+	 * with a stale address space WITHOUT being in lazy mode after
+	 * restoring the previous mm.
+	 */
+	if (this_cpu_read(cpu_tlbstate_shared.is_lazy))
+		leave_mm();
+
+	prev_mm = this_cpu_read(cpu_tlbstate.loaded_mm);
+	switch_mm_irqs_off(NULL, temp_mm, current);
+
+	/*
+	 * If breakpoints are enabled, disable them while the temporary mm is
+	 * used. Userspace might set up watchpoints on addresses that are used
+	 * in the temporary mm, which would lead to wrong signals being sent or
+	 * crashes.
+	 *
+	 * Note that breakpoints are not disabled selectively, which also causes
+	 * kernel breakpoints (e.g., perf's) to be disabled. This might be
+	 * undesirable, but still seems reasonable as the code that runs in the
+	 * temporary mm should be short.
+	 */
+	if (hw_breakpoint_active())
+		hw_breakpoint_disable();
+
+	return prev_mm;
+}
+
+void unuse_temporary_mm(struct mm_struct *mm, struct mm_struct *prev_mm)
+{
+	lockdep_assert_irqs_disabled();
+
+	switch_mm_irqs_off(NULL, prev_mm, current);
+
+	/* Clear the cpumask, to indicate no TLB flushing is needed anywhere */
+	cpumask_clear_cpu(raw_smp_processor_id(), mm_cpumask(mm));
+
+	/*
+	 * Restore the breakpoints if they were disabled before the temporary mm
+	 * was loaded.
+	 */
+	if (hw_breakpoint_active())
+		hw_breakpoint_restore();
+}
+
 /*
  * Call this when reinitializing a CPU.  It fixes the following potential
  * problems:
-- 
2.45.2


  parent reply	other threads:[~2025-04-02  9:46 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-04-02  9:45 [PATCH 0/7 -v2] Factor out, clean up and use the use_/unuse_temporary_mm() APIs some more Ingo Molnar
2025-04-02  9:45 ` [PATCH 1/7] x86/mm: Add 'mm' argument to unuse_temporary_mm() Ingo Molnar
2025-04-12 18:46   ` [tip: x86/alternatives] " tip-bot2 for Peter Zijlstra
2025-04-02  9:45 ` [PATCH 2/7] x86/events, x86/insn-eval: Remove incorrect current->active_mm references Ingo Molnar
2025-04-12 18:46   ` [tip: x86/alternatives] " tip-bot2 for Andy Lutomirski
2025-04-02  9:45 ` Ingo Molnar [this message]
2025-04-12 18:46   ` [tip: x86/alternatives] x86/mm: Make use_/unuse_temporary_mm() non-static tip-bot2 for Andy Lutomirski
2025-04-02  9:45 ` [PATCH 4/7] x86/mm: Remove 'mm' argument from unuse_temporary_mm() again Ingo Molnar
2025-04-12 18:46   ` [tip: x86/alternatives] " tip-bot2 for Peter Zijlstra
2025-04-02  9:45 ` [PATCH 5/7] x86/mm: Allow temporary MMs when IRQs are on Ingo Molnar
2025-04-12 18:46   ` [tip: x86/alternatives] " tip-bot2 for Andy Lutomirski
2025-04-02  9:45 ` [PATCH 6/7] x86/efi: Make efi_enter/leave_mm() use the use_/unuse_temporary_mm() machinery Ingo Molnar
2025-04-12 18:46   ` [tip: x86/alternatives] " tip-bot2 for Andy Lutomirski
2025-04-17 14:17     ` Borislav Petkov
2025-04-18  9:50       ` Peter Zijlstra
2025-04-18 11:43         ` Borislav Petkov
2025-04-18 12:37           ` Ingo Molnar
2025-04-18 12:48         ` [tip: x86/alternatives] x86/mm: Fix {,un}use_temporary_mm() IRQ state tip-bot2 for Peter Zijlstra
2025-04-02  9:45 ` [PATCH 7/7] x86/mm: Opt-in to IRQs-off activate_mm() Ingo Molnar
2025-04-12 18:46   ` [tip: x86/alternatives] " tip-bot2 for Andy Lutomirski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250402094540.3586683-4-mingo@kernel.org \
    --to=mingo@kernel.org \
    --cc=akpm@linux-foundation.org \
    --cc=hpa@zytor.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=luto@kernel.org \
    --cc=peterz@infradead.org \
    --cc=riel@surriel.com \
    --cc=torvalds@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox