From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
Luiz Augusto von Dentz <luiz.von.dentz@intel.com>,
Sasha Levin <sashal@kernel.org>,
marcel@holtmann.org, luiz.dentz@gmail.com,
linux-bluetooth@vger.kernel.org
Subject: [PATCH AUTOSEL 6.14 51/54] Bluetooth: qca: simplify WCN399x NVM loading
Date: Thu, 3 Apr 2025 15:02:06 -0400 [thread overview]
Message-ID: <20250403190209.2675485-51-sashal@kernel.org> (raw)
In-Reply-To: <20250403190209.2675485-1-sashal@kernel.org>
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
[ Upstream commit 1cc41b5092e3aa511454ec882c525af311bee631 ]
The WCN399x code has two separate cases for loading the NVM data. In
preparation to adding support for WCN3950, which also requires similar
quirk, split the "variant" to be specified explicitly and merge two
snprintfs into a single one.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/bluetooth/btqca.c | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)
diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
index cdf09d9a9ad27..7d6b02fe2040f 100644
--- a/drivers/bluetooth/btqca.c
+++ b/drivers/bluetooth/btqca.c
@@ -785,6 +785,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
const char *firmware_name, const char *rampatch_name)
{
struct qca_fw_config config = {};
+ const char *variant = "";
int err;
u8 rom_ver = 0;
u32 soc_ver;
@@ -883,13 +884,11 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
case QCA_WCN3990:
case QCA_WCN3991:
case QCA_WCN3998:
- if (le32_to_cpu(ver.soc_id) == QCA_WCN3991_SOC_ID) {
- snprintf(config.fwname, sizeof(config.fwname),
- "qca/crnv%02xu.bin", rom_ver);
- } else {
- snprintf(config.fwname, sizeof(config.fwname),
- "qca/crnv%02x.bin", rom_ver);
- }
+ if (le32_to_cpu(ver.soc_id) == QCA_WCN3991_SOC_ID)
+ variant = "u";
+
+ snprintf(config.fwname, sizeof(config.fwname),
+ "qca/crnv%02x%s.bin", rom_ver, variant);
break;
case QCA_WCN3988:
snprintf(config.fwname, sizeof(config.fwname),
--
2.39.5
next prev parent reply other threads:[~2025-04-03 19:04 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-03 19:01 [PATCH AUTOSEL 6.14 01/54] wifi: ath9k: use unsigned long for activity check timestamp Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 02/54] wifi: ath11k: Fix DMA buffer allocation to resolve SWIOTLB issues Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 03/54] wifi: ath11k: fix memory leak in ath11k_xxx_remove() Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 04/54] wifi: ath12k: fix memory leak in ath12k_pci_remove() Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 05/54] wifi: ath12k: Fix invalid entry fetch in ath12k_dp_mon_srng_process Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 06/54] wifi: ath12k: Avoid memory leak while enabling statistics Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 07/54] ata: libata-core: Add 'external' to the libata.force kernel parameter Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 08/54] scsi: mpi3mr: Avoid reply queue full condition Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 09/54] scsi: mpi3mr: Synchronous access b/w reset and tm thread for reply queue Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 10/54] net: page_pool: don't cast mp param to devmem Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 11/54] f2fs: don't retry IO for corrupted data scenario Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 12/54] wifi: mac80211: add strict mode disabling workarounds Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 13/54] wifi: mac80211: ensure sdata->work is canceled before initialized Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 14/54] scsi: target: spc: Fix RSOC parameter data header size Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 15/54] net: usb: asix_devices: add FiberGecko DeviceID Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 16/54] page_pool: avoid infinite loop to schedule delayed worker Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 17/54] can: flexcan: Add quirk to handle separate interrupt lines for mailboxes Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 18/54] can: flexcan: add NXP S32G2/S32G3 SoC support Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 19/54] jfs: Fix uninit-value access of imap allocated in the diMount() function Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 20/54] mptcp: move the whole rx path under msk socket lock protection Sasha Levin
2025-04-10 11:05 ` Matthieu Baerts
2025-04-14 0:12 ` Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 21/54] fs/jfs: cast inactags to s64 to prevent potential overflow Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 22/54] fs/jfs: Prevent integer overflow in AG size calculation Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 23/54] jfs: Prevent copying of nlink with value 0 from disk inode Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 24/54] jfs: add sanity check for agwidth in dbMount Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 25/54] wifi: rtw88: Add support for Mercusys MA30N and D-Link DWA-T185 rev. A1 Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 26/54] ata: libata-eh: Do not use ATAPI DMA for a device limited to PIO mode Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 27/54] net: sfp: add quirk for 2.5G OEM BX SFP Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 28/54] wifi: ath12k: Fix invalid data access in ath12k_dp_rx_h_undecap_nwifi Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 29/54] null_blk: replace null_process_cmd() call in null_zone_write() Sasha Levin
2025-04-04 3:31 ` Shinichiro Kawasaki
2025-04-14 0:12 ` Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 30/54] f2fs: fix to avoid out-of-bounds access in f2fs_truncate_inode_blocks() Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 31/54] net: sfp: add quirk for FS SFP-10GM-T copper SFP+ module Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 32/54] ahci: add PCI ID for Marvell 88SE9215 SATA Controller Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 33/54] ext4: protect ext4_release_dquot against freezing Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 34/54] Revert "f2fs: rebuild nat_bits during umount" Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 35/54] wifi: mac80211: fix userspace_selectors corruption Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 36/54] ext4: ignore xattrs past end Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 37/54] cdc_ether|r8152: ThinkPad Hybrid USB-C/A Dock quirk Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 38/54] scsi: st: Fix array overflow in st_setup() Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 39/54] ahci: Marvell 88SE9215 controllers prefer DMA for ATAPI Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 40/54] btrfs: reject out-of-band dirty folios during writeback Sasha Levin
2025-04-03 19:37 ` David Sterba
2025-04-14 0:11 ` Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 41/54] btrfs: harden block_group::bg_list against list_del() races Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 42/54] wifi: mt76: mt76x2u: add TP-Link TL-WDN6200 ID to device table Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 43/54] net: vlan: don't propagate flags on open Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 44/54] tracing: fix return value in __ftrace_event_enable_disable for TRACE_REG_UNREGISTER Sasha Levin
2025-04-03 19:02 ` [PATCH AUTOSEL 6.14 45/54] Bluetooth: btusb: Add new VID/PID for WCN785x Sasha Levin
2025-04-03 19:02 ` [PATCH AUTOSEL 6.14 46/54] Bluetooth: btintel_pcie: Add device id of Whale Peak Sasha Levin
2025-04-03 19:02 ` [PATCH AUTOSEL 6.14 47/54] Bluetooth: btusb: Add 13 USB device IDs for Qualcomm WCN785x Sasha Levin
2025-04-03 19:02 ` [PATCH AUTOSEL 6.14 48/54] Bluetooth: hci_uart: fix race during initialization Sasha Levin
2025-04-03 19:02 ` [PATCH AUTOSEL 6.14 49/54] Bluetooth: btusb: Add 2 HWIDs for MT7922 Sasha Levin
2025-04-03 19:02 ` [PATCH AUTOSEL 6.14 50/54] Bluetooth: hci_qca: use the power sequencer for wcn6750 Sasha Levin
2025-04-03 19:02 ` Sasha Levin [this message]
2025-04-03 19:02 ` [PATCH AUTOSEL 6.14 52/54] Bluetooth: qca: add WCN3950 support Sasha Levin
2025-04-03 19:02 ` [PATCH AUTOSEL 6.14 53/54] Bluetooth: Add quirk for broken READ_VOICE_SETTING Sasha Levin
2025-04-03 19:02 ` [PATCH AUTOSEL 6.14 54/54] Bluetooth: Add quirk for broken READ_PAGE_SCAN_TYPE Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250403190209.2675485-51-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luiz.dentz@gmail.com \
--cc=luiz.von.dentz@intel.com \
--cc=marcel@holtmann.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox