From: "Jackson.lee" <jackson.lee@chipsnmedia.com>
To: mchehab@kernel.org, hverkuil-cisco@xs4all.nl,
sebastian.fricke@collabora.com, nicolas.dufresne@collabora.com,
bob.beckett@collabora.com, dafna.hirschfeld@collabora.com
Cc: linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
jackson.lee@chipsnmedia.com, lafley.kim@chipsnmedia.com,
b-brnich@ti.com, hverkuil@xs4all.nl, nas.chung@chipsnmedia.com
Subject: [RESEND PATCH v1 0/7] Performance improvement of decoder
Date: Thu, 10 Apr 2025 12:39:55 +0900 [thread overview]
Message-ID: <20250410034002.88-1-jackson.lee@chipsnmedia.com> (raw)
From: Jackson Lee <jackson.lee@chipsnmedia.com>
v4l2-compliance results:
========================
v4l2-compliance 1.28.1-5233, 64 bits, 64-bit time_t
Buffer ioctls:
warn: v4l2-test-buffers.cpp(693): VIDIOC_CREATE_BUFS not supported
warn: v4l2-test-buffers.cpp(693): VIDIOC_CREATE_BUFS not supported
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test CREATE_BUFS maximum buffers: OK
test VIDIOC_EXPBUF: OK
test Requests: OK (Not Supported)
Total for wave5-dec device /dev/video0: 46, Succeeded: 46, Failed: 0, Warnings: 2
Total for wave5-enc device /dev/video1: 46, Succeeded: 46, Failed: 0, Warnings: 0
Fluster test results:
=====================
Running test suite JCT-VC-HEVC_V1 with decoder GStreamer-H.265-V4L2-Gst1.0
Using 3 parallel job(s)
Ran 133/147 tests successfully in 41.629 secs
(1 test fails because of not supporting to parse multi frames, 1 test fails because of a missing frame and slight corruption,
2 tests fail because of sizes which are incompatible with the IP, 11 tests fail because of unsupported 10 bit format)
Running test suite JVT-AVC_V1 with decoder GStreamer-H.264-V4L2-Gst1.0
Using 3 parallel job(s)
Ran 78/135 tests successfully in 44.578 secs
(57 fail because the hardware is unable to decode MBAFF / FMO / Field / Extended profile streams.)
Seek test
=====================
1. gst-play-1.0 seek.264
2. this will use waylandsink since gst-play-1.0 uses playbin.
if you don't want to hook up display,
you can run gst-play-1.0 seek.264 --videosink=fakevideosink instead
3. Let pipeline run for 2-3 seconds
4. press SPACE key to pause
5. press 0 to reset
press SPACE to start again
gst-play-1.0 seek.264 --videosink=fakevideosink
Press 'k' to see a list of keyboard shortcuts.
Now playing /root/seek.264
Redistribute latency...
Redistribute latency...
Redistribute latency...
Redistribute latency...
Redistribute latency...aused
0:00:09.9 / 0:00:09.7
Reached end of play list.
Sequence Change test
=====================
gst-launch-1.0 filesrc location=./switch_1080p_720p_240frames.h264 ! h264parse ! v4l2h264dec ! filesink location=./h264_output_420.yuv
Setting pipeline to PAUSED ...
Pipeline is PREROLLING ...
Redistribute latency...
Redistribute latency...
Pipeline is PREROLLED ...
Setting pipeline to PLAYING ...
Redistribute latency...
New clock: GstSystemClock
Got EOS from element "pipeline0".
Execution ended after 0:00:05.772414400
Setting pipeline to NULL ...
Freeing pipeline ...
Change since v0:
===================
* For [PATCH v1 2/7] media: chips-media: wave5: Improve performance of decoder
- separates the previous patch to a few patches
* For [PATCH v1 3/7] media: chips-media: wave5: Fix not to be closed
- separated from the previous patch of performance improvement of
decoder
* For [PATCH v1 4/7] media: chips-media: wave5: Use spinlock whenever state is changed
- separated from the previous patch of performance improvement of
decoder
* For [PATCH v1 5/7] media: chips-media: wave5: Fix not to free resources normally when
instance was destroyed
- separated from the previous patch of performance improvement of
decoder
* For [PATCH v1 7/7] media: chips-media: wave5: Fix SError of kernel panic when closed
- separated from the previous patch of performance improvement of
decoder
Jackson Lee (7):
media: chips-media: wave5: Fix Null reference while testing fluster
media: chips-media: wave5: Improve performance of decoder
media: chips-media: wave5: Fix not to be closed
media: chips-media: wave5: Use spinlock whenever state is changed
media: chips-media: wave5: Fix not to free resources normally when
instance was destroyed
media: chips-media: wave5: Reduce high CPU load
media: chips-media: wave5: Fix SError of kernel panic when closed
.../platform/chips-media/wave5/wave5-helper.c | 10 +-
.../chips-media/wave5/wave5-vpu-dec.c | 116 +++++++++++-------
.../chips-media/wave5/wave5-vpu-enc.c | 8 +-
.../platform/chips-media/wave5/wave5-vpu.c | 70 +++++++++--
.../platform/chips-media/wave5/wave5-vpuapi.c | 36 +++---
.../platform/chips-media/wave5/wave5-vpuapi.h | 10 ++
.../chips-media/wave5/wave5-vpuconfig.h | 1 +
7 files changed, 179 insertions(+), 72 deletions(-)
--
2.43.0
next reply other threads:[~2025-04-10 3:40 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-10 3:39 Jackson.lee [this message]
2025-04-10 3:39 ` [RESEND PATCH v1 1/7] media: chips-media: wave5: Fix Null reference while testing fluster Jackson.lee
2025-04-10 3:39 ` [RESEND PATCH v1 2/7] media: chips-media: wave5: Improve performance of decoder Jackson.lee
2025-04-10 3:39 ` [RESEND PATCH v1 3/7] media: chips-media: wave5: Fix not to be closed Jackson.lee
2025-04-10 3:39 ` [RESEND PATCH v1 4/7] media: chips-media: wave5: Use spinlock whenever state is changed Jackson.lee
2025-04-10 3:40 ` [RESEND PATCH v1 5/7] media: chips-media: wave5: Fix not to free resources normally when instance was destroyed Jackson.lee
2025-04-10 3:40 ` [RESEND PATCH v1 6/7] media: chips-media: wave5: Reduce high CPU load Jackson.lee
2025-04-10 3:40 ` [RESEND PATCH v1 7/7] media: chips-media: wave5: Fix SError of kernel panic when closed Jackson.lee
2025-04-10 12:39 ` [RESEND PATCH v1 0/7] Performance improvement of decoder Nicolas Dufresne
2025-04-11 0:49 ` jackson.lee
2025-04-11 15:47 ` Nicolas Dufresne
2025-04-14 1:44 ` jackson.lee
2025-04-11 16:57 ` Nicolas Dufresne
2025-04-14 2:04 ` jackson.lee
2025-04-14 13:28 ` Nicolas Dufresne
2025-04-29 5:59 ` jackson.lee
2025-05-07 4:57 ` jackson.lee
2025-05-07 12:56 ` Nicolas Dufresne
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250410034002.88-1-jackson.lee@chipsnmedia.com \
--to=jackson.lee@chipsnmedia.com \
--cc=b-brnich@ti.com \
--cc=bob.beckett@collabora.com \
--cc=dafna.hirschfeld@collabora.com \
--cc=hverkuil-cisco@xs4all.nl \
--cc=hverkuil@xs4all.nl \
--cc=lafley.kim@chipsnmedia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=nas.chung@chipsnmedia.com \
--cc=nicolas.dufresne@collabora.com \
--cc=sebastian.fricke@collabora.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox