[PATCH v2 2/3] arm64: qcom: sc7280: Move phy, perst to root port node

[Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>]

Move phy, perst, to root port from the controller node.

Rename perst-gpios to reset-gpios to align with the expected naming
convention of pci-bus-common.yaml.

Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts   | 5 ++++-
 arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 5 ++++-
 arch/arm64/boot/dts/qcom/sc7280-idp.dtsi       | 5 ++++-
 arch/arm64/boot/dts/qcom/sc7280.dtsi           | 6 ++----
 4 files changed, 14 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
index 7a36c90ad4ec8b52f30b22b1621404857d6ef336..3dd58986ad5da0f898537a51715bb5d0fecbe100 100644
--- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
+++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
@@ -709,8 +709,11 @@ &mdss_edp_phy {
 	status = "okay";
 };
 
+&pcie1_port0 {
+	reset-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+};
+
 &pcie1 {
-	perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
 
 	pinctrl-0 = <&pcie1_reset_n>, <&pcie1_wake_n>;
 	pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
index 2ba4ea60cb14736c9cfbf9f4a9048f20a4c921f2..ff11d85d015bdab6a90bd8a0eb9113a339866953 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
@@ -472,10 +472,13 @@ &pcie1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie1_clkreq_n>, <&ssd_rst_l>, <&pe_wake_odl>;
 
-	perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
 	vddpe-3v3-supply = <&pp3300_ssd>;
 };
 
+&pcie1_port0 {
+	reset-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+};
+
 &pm8350c_pwm {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index 7370aa0dbf0e3f9e7a3e38c3f00686e1d3dcbc9f..3209bb15dfec36299cabae07d34f3dc82db6de77 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -414,9 +414,12 @@ &lpass_va_macro {
 	vdd-micb-supply = <&vreg_bob>;
 };
 
+&pcie1_port0 {
+	reset-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+};
+
 &pcie1 {
 	status = "okay";
-	perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
 
 	vddpe-3v3-supply = <&nvme_3v3_regulator>;
 
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 0f2caf36910b65c398c9e03800a8ce0a8a1f8fc7..376fabf3b4eac34d75bb79ef902c9d83490c45f7 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -2271,9 +2271,6 @@ pcie1: pcie@1c08000 {
 
 			power-domains = <&gcc GCC_PCIE_1_GDSC>;
 
-			phys = <&pcie1_phy>;
-			phy-names = "pciephy";
-
 			pinctrl-names = "default";
 			pinctrl-0 = <&pcie1_clkreq_n>;
 
@@ -2284,7 +2281,7 @@ pcie1: pcie@1c08000 {
 
 			status = "disabled";
 
-			pcie@0 {
+			pcie1_port0: pcie@0 {
 				device_type = "pci";
 				reg = <0x0 0x0 0x0 0x0 0x0>;
 				bus-range = <0x01 0xff>;
@@ -2292,6 +2289,7 @@ pcie@0 {
 				#address-cells = <3>;
 				#size-cells = <2>;
 				ranges;
+				phys = <&pcie1_phy>;
 			};
 		};
 

-- 
2.34.1