[PATCHv2] wifi: ath9k: ahb: do ioremap resource in one step

[Rosen Penev <rosenp@gmail.com>]

Simplifies probe slightly and adds extra error codes.

Switching from devm_ioremap to the platform variant ends up calling
devm_request_mem_region, which reserves the memory region for the
various wmacs. Per board, there is only one wmac and after some fairly
thorough analysis, there are no overlapping memory regions between wmacs
and other devices on the ahb.

Tested on a TP-Link Archer C7v2.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
 v2: remove wrong devm irq conversion.
 drivers/net/wireless/ath/ath9k/ahb.c | 13 +++----------
 1 file changed, 3 insertions(+), 10 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/ahb.c b/drivers/net/wireless/ath/ath9k/ahb.c
index d4805e02b927..49b7ab26c477 100644
--- a/drivers/net/wireless/ath/ath9k/ahb.c
+++ b/drivers/net/wireless/ath/ath9k/ahb.c
@@ -74,7 +74,6 @@ static int ath_ahb_probe(struct platform_device *pdev)
 	void __iomem *mem;
 	struct ath_softc *sc;
 	struct ieee80211_hw *hw;
-	struct resource *res;
 	const struct platform_device_id *id = platform_get_device_id(pdev);
 	int irq;
 	int ret = 0;
@@ -86,16 +85,10 @@ static int ath_ahb_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (res == NULL) {
-		dev_err(&pdev->dev, "no memory resource found\n");
-		return -ENXIO;
-	}
-
-	mem = devm_ioremap(&pdev->dev, res->start, resource_size(res));
-	if (mem == NULL) {
+	mem = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(mem)) {
 		dev_err(&pdev->dev, "ioremap failed\n");
-		return -ENOMEM;
+		return PTR_ERR(mem);
 	}
 
 	irq = platform_get_irq(pdev, 0);
-- 
2.49.0