From: Srish Srinivasan <ssrish@linux.ibm.com>
To: linux-integrity@vger.kernel.org, linuxppc-dev@lists.ozlabs.org
Cc: maddy@linux.ibm.com, mpe@ellerman.id.au, npiggin@gmail.com,
christophe.leroy@csgroup.eu, naveen@kernel.org,
ajd@linux.ibm.com, zohar@linux.ibm.com, nayna@linux.ibm.com,
linux-kernel@vger.kernel.org
Subject: [PATCH 1/3] powerpc/pseries: Correct secvar format representation for static key management
Date: Wed, 30 Apr 2025 14:33:48 +0530 [thread overview]
Message-ID: <20250430090350.30023-2-ssrish@linux.ibm.com> (raw)
In-Reply-To: <20250430090350.30023-1-ssrish@linux.ibm.com>
On a PLPKS enabled PowerVM LPAR, the secvar format property for static
key management is misrepresented as "ibm,plpks-sb-unknown", creating
reason for confusion.
Static key management mode uses fixed, built-in keys. Dynamic key
management mode allows keys to be updated in production to handle
security updates without firmware rebuilds.
Define a function named plpks_get_sb_keymgmt_mode() to retrieve the
key management mode based on the existence of the SB_VERSION property
in the firmware.
Set the secvar format property to either "ibm,plpks-sb-v1" or
"ibm,plpks-sb-v0" based on the key management mode, and return the
length of the secvar format property.
Co-developed-by: Souradeep <soura@imap.linux.ibm.com>
Signed-off-by: Souradeep <soura@imap.linux.ibm.com>
Signed-off-by: Srish Srinivasan <ssrish@linux.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
---
arch/powerpc/platforms/pseries/plpks-secvar.c | 70 +++++++++++--------
1 file changed, 40 insertions(+), 30 deletions(-)
diff --git a/arch/powerpc/platforms/pseries/plpks-secvar.c b/arch/powerpc/platforms/pseries/plpks-secvar.c
index 257fd1f8bc19..d57067a733ab 100644
--- a/arch/powerpc/platforms/pseries/plpks-secvar.c
+++ b/arch/powerpc/platforms/pseries/plpks-secvar.c
@@ -152,39 +152,49 @@ static int plpks_set_variable(const char *key, u64 key_len, u8 *data,
return rc;
}
-// PLPKS dynamic secure boot doesn't give us a format string in the same way OPAL does.
-// Instead, report the format using the SB_VERSION variable in the keystore.
-// The string is made up by us, and takes the form "ibm,plpks-sb-v<n>" (or "ibm,plpks-sb-unknown"
-// if the SB_VERSION variable doesn't exist). Hypervisor defines the SB_VERSION variable as a
-// "1 byte unsigned integer value".
-static ssize_t plpks_secvar_format(char *buf, size_t bufsize)
+/*
+ * Return the key management mode.
+ *
+ * SB_VERSION is defined as a "1 byte unsigned integer value". It is owned by
+ * the Partition Firmware and its presence indicates that the key management
+ * mode is dynamic. Only signed variables have null bytes in their names.
+ * SB_VERSION does not.
+ *
+ * Return 1 to indicate that the key management mode is dynamic. Otherwise
+ * return 0, indicating that the key management mode is static.
+ */
+static u8 plpks_get_sb_keymgmt_mode(void)
{
- struct plpks_var var = {0};
- ssize_t ret;
- u8 version;
-
- var.component = NULL;
- // Only the signed variables have null bytes in their names, this one doesn't
- var.name = "SB_VERSION";
- var.namelen = strlen(var.name);
- var.datalen = 1;
- var.data = &version;
-
- // Unlike the other vars, SB_VERSION is owned by firmware instead of the OS
- ret = plpks_read_fw_var(&var);
- if (ret) {
- if (ret == -ENOENT) {
- ret = snprintf(buf, bufsize, "ibm,plpks-sb-unknown");
- } else {
- pr_err("Error %ld reading SB_VERSION from firmware\n", ret);
- ret = -EIO;
- }
- goto err;
+ u8 mode;
+ ssize_t rc;
+ struct plpks_var var = {
+ .component = NULL,
+ .name = "SB_VERSION",
+ .namelen = 10,
+ .datalen = 1,
+ .data = &mode,
+ };
+
+ rc = plpks_read_fw_var(&var);
+ if (rc) {
+ pr_info("Error %ld reading SB_VERSION from firmware\n", rc);
+ mode = 0;
}
+ return mode;
+}
- ret = snprintf(buf, bufsize, "ibm,plpks-sb-v%hhu", version);
-err:
- return ret;
+// PLPKS dynamic secure boot doesn't give us a format string in the same way
+// OPAL does. Instead, report the format using the SB_VERSION variable in the
+// keystore. The string, made up by us, takes the form "ibm,plpks-sb-v<n>".Set
+// the secvar format property to either "ibm,plpks-sb-v1" or "ibm,plpks-sb-v0",
+// based on the key management mode, and return the length of the secvar format
+// property.
+static ssize_t plpks_secvar_format(char *buf, size_t bufsize)
+{
+ u8 mode;
+
+ mode = plpks_get_sb_keymgmt_mode();
+ return snprintf(buf, bufsize, "ibm,plpks-sb-v%hhu", mode);
}
static int plpks_max_size(u64 *max_size)
--
2.47.1
next prev parent reply other threads:[~2025-04-30 9:04 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-30 9:03 [PATCH 0/3] Enhancements to the secvar interface in static key management mode Srish Srinivasan
2025-04-30 9:03 ` Srish Srinivasan [this message]
2025-04-30 15:20 ` [PATCH 1/3] powerpc/pseries: Correct secvar format representation for static key management Nayna Jain
2025-05-05 8:36 ` Andrew Donnellan
2025-05-06 18:59 ` Srish Srinivasan
2025-05-07 6:17 ` Andrew Donnellan
2025-05-07 15:48 ` Srish Srinivasan
2025-05-12 9:51 ` Andrew Donnellan
2025-05-12 9:55 ` Andrew Donnellan
2025-05-12 10:16 ` Srish Srinivasan
2025-05-06 19:27 ` Nayna Jain
2025-05-07 6:03 ` Andrew Donnellan
2025-04-30 9:03 ` [PATCH 2/3] powerpc/secvar: Expose secvars relevant to the key management mode Srish Srinivasan
2025-04-30 15:22 ` Nayna Jain
2025-05-05 7:23 ` Andrew Donnellan
2025-05-06 19:00 ` Srish Srinivasan
2025-04-30 9:03 ` [PATCH 3/3] integrity/platform_certs: Allow loading of keys in static " Srish Srinivasan
2025-04-30 15:22 ` Nayna Jain
2025-05-05 7:55 ` Andrew Donnellan
2025-05-06 19:00 ` Srish Srinivasan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250430090350.30023-2-ssrish@linux.ibm.com \
--to=ssrish@linux.ibm.com \
--cc=ajd@linux.ibm.com \
--cc=christophe.leroy@csgroup.eu \
--cc=linux-integrity@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=maddy@linux.ibm.com \
--cc=mpe@ellerman.id.au \
--cc=naveen@kernel.org \
--cc=nayna@linux.ibm.com \
--cc=npiggin@gmail.com \
--cc=zohar@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).