[PATCH] scsi: isci: Remove unused sci_remote_device_reset

[linux@treblig.org]

From: "Dr. David Alan Gilbert" <linux@treblig.org>

sci_remote_device_reset() last use was removed in 2012 by
commit 14aaa9f0a318 ("isci: Redesign device suspension, abort, cleanup.")

Remove it.

Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
---
 drivers/scsi/isci/remote_device.c | 30 ------------------------------
 drivers/scsi/isci/remote_device.h | 15 ---------------
 2 files changed, 45 deletions(-)

diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c
index 287e1ba8ddd7..82deb6a83a8c 100644
--- a/drivers/scsi/isci/remote_device.c
+++ b/drivers/scsi/isci/remote_device.c
@@ -392,36 +392,6 @@ enum sci_status sci_remote_device_stop(struct isci_remote_device *idev,
 	}
 }
 
-enum sci_status sci_remote_device_reset(struct isci_remote_device *idev)
-{
-	struct sci_base_state_machine *sm = &idev->sm;
-	enum sci_remote_device_states state = sm->current_state_id;
-
-	switch (state) {
-	case SCI_DEV_INITIAL:
-	case SCI_DEV_STOPPED:
-	case SCI_DEV_STARTING:
-	case SCI_SMP_DEV_IDLE:
-	case SCI_SMP_DEV_CMD:
-	case SCI_DEV_STOPPING:
-	case SCI_DEV_FAILED:
-	case SCI_DEV_RESETTING:
-	case SCI_DEV_FINAL:
-	default:
-		dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %s\n",
-			 __func__, dev_state_name(state));
-		return SCI_FAILURE_INVALID_STATE;
-	case SCI_DEV_READY:
-	case SCI_STP_DEV_IDLE:
-	case SCI_STP_DEV_CMD:
-	case SCI_STP_DEV_NCQ:
-	case SCI_STP_DEV_NCQ_ERROR:
-	case SCI_STP_DEV_AWAIT_RESET:
-		sci_change_state(sm, SCI_DEV_RESETTING);
-		return SCI_SUCCESS;
-	}
-}
-
 enum sci_status sci_remote_device_frame_handler(struct isci_remote_device *idev,
 						     u32 frame_index)
 {
diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h
index 561ae3f2cbbd..c1fdf45751cd 100644
--- a/drivers/scsi/isci/remote_device.h
+++ b/drivers/scsi/isci/remote_device.h
@@ -159,21 +159,6 @@ enum sci_status sci_remote_device_stop(
 	struct isci_remote_device *idev,
 	u32 timeout);
 
-/**
- * sci_remote_device_reset() - This method will reset the device making it
- *    ready for operation. This method must be called anytime the device is
- *    reset either through a SMP phy control or a port hard reset request.
- * @remote_device: This parameter specifies the device to be reset.
- *
- * This method does not actually cause the device hardware to be reset. This
- * method resets the software object so that it will be operational after a
- * device hardware reset completes. An indication of whether the device reset
- * was accepted. SCI_SUCCESS This value is returned if the device reset is
- * started.
- */
-enum sci_status sci_remote_device_reset(
-	struct isci_remote_device *idev);
-
 /**
  * enum sci_remote_device_states - This enumeration depicts all the states
  *    for the common remote device state machine.
-- 
2.49.0