[PATCH v2 2/4] media: i2c: imx214: Prepare for variable clock frequency

["André Apitzsch via B4 Relay" <devnull+git.apitzsch.eu@kernel.org>]

From: André Apitzsch <git@apitzsch.eu>

Move clock frequency related parameters out of the constant register
sequences, such that the hard coded external clock frequency can be
replaced by a variable in the upcoming patches.

Acked-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: André Apitzsch <git@apitzsch.eu>
---
 drivers/media/i2c/imx214.c | 54 ++++++++++++++++++++++++++--------------------
 1 file changed, 31 insertions(+), 23 deletions(-)

diff --git a/drivers/media/i2c/imx214.c b/drivers/media/i2c/imx214.c
index 0199195dcb7d12dc2ff253fe3eb77ddbcd0812a9..3aca6ebb02d649c1b7f0b6a6049c1e3aa3d08951 100644
--- a/drivers/media/i2c/imx214.c
+++ b/drivers/media/i2c/imx214.c
@@ -299,16 +299,6 @@ static const struct cci_reg_sequence mode_4096x2304[] = {
 	{ IMX214_REG_DIG_CROP_WIDTH, 4096 },
 	{ IMX214_REG_DIG_CROP_HEIGHT, 2304 },
 
-	{ IMX214_REG_VTPXCK_DIV, 5 },
-	{ IMX214_REG_VTSYCK_DIV, 2 },
-	{ IMX214_REG_PREPLLCK_VT_DIV, 3 },
-	{ IMX214_REG_PLL_VT_MPY, 150 },
-	{ IMX214_REG_OPPXCK_DIV, 10 },
-	{ IMX214_REG_OPSYCK_DIV, 1 },
-	{ IMX214_REG_PLL_MULT_DRIV, IMX214_PLL_SINGLE },
-
-	{ IMX214_REG_REQ_LINK_BIT_RATE, IMX214_LINK_BIT_RATE_MBPS(4800) },
-
 	{ CCI_REG8(0x3A03), 0x09 },
 	{ CCI_REG8(0x3A04), 0x50 },
 	{ CCI_REG8(0x3A05), 0x01 },
@@ -362,16 +352,6 @@ static const struct cci_reg_sequence mode_1920x1080[] = {
 	{ IMX214_REG_DIG_CROP_WIDTH, 1920 },
 	{ IMX214_REG_DIG_CROP_HEIGHT, 1080 },
 
-	{ IMX214_REG_VTPXCK_DIV, 5 },
-	{ IMX214_REG_VTSYCK_DIV, 2 },
-	{ IMX214_REG_PREPLLCK_VT_DIV, 3 },
-	{ IMX214_REG_PLL_VT_MPY, 150 },
-	{ IMX214_REG_OPPXCK_DIV, 10 },
-	{ IMX214_REG_OPSYCK_DIV, 1 },
-	{ IMX214_REG_PLL_MULT_DRIV, IMX214_PLL_SINGLE },
-
-	{ IMX214_REG_REQ_LINK_BIT_RATE, IMX214_LINK_BIT_RATE_MBPS(4800) },
-
 	{ CCI_REG8(0x3A03), 0x04 },
 	{ CCI_REG8(0x3A04), 0xF8 },
 	{ CCI_REG8(0x3A05), 0x02 },
@@ -405,9 +385,6 @@ static const struct cci_reg_sequence mode_table_common[] = {
 	/* ATR setting */
 	{ IMX214_REG_ATR_FAST_MOVE, 2 },
 
-	/* external clock setting */
-	{ IMX214_REG_EXCK_FREQ, IMX214_EXCK_FREQ(IMX214_DEFAULT_CLK_FREQ / 1000000) },
-
 	/* global setting */
 	/* basic config */
 	{ IMX214_REG_MASK_CORR_FRAMES, IMX214_CORR_FRAMES_MASK },
@@ -777,6 +754,24 @@ static int imx214_entity_init_state(struct v4l2_subdev *subdev,
 	return 0;
 }
 
+static int imx214_configure_pll(struct imx214 *imx214)
+{
+	int ret = 0;
+
+	cci_write(imx214->regmap, IMX214_REG_VTPXCK_DIV, 5, &ret);
+	cci_write(imx214->regmap, IMX214_REG_VTSYCK_DIV, 2, &ret);
+	cci_write(imx214->regmap, IMX214_REG_PREPLLCK_VT_DIV, 3, &ret);
+	cci_write(imx214->regmap, IMX214_REG_PLL_VT_MPY, 150, &ret);
+	cci_write(imx214->regmap, IMX214_REG_OPPXCK_DIV, 10, &ret);
+	cci_write(imx214->regmap, IMX214_REG_OPSYCK_DIV, 1, &ret);
+	cci_write(imx214->regmap, IMX214_REG_PLL_MULT_DRIV,
+		  IMX214_PLL_SINGLE, &ret);
+	cci_write(imx214->regmap, IMX214_REG_EXCK_FREQ,
+		  IMX214_EXCK_FREQ(IMX214_DEFAULT_CLK_FREQ / 1000000), &ret);
+
+	return ret;
+}
+
 static int imx214_update_digital_gain(struct imx214 *imx214, u32 val)
 {
 	int ret = 0;
@@ -1020,6 +1015,19 @@ static int imx214_start_streaming(struct imx214 *imx214)
 		return ret;
 	}
 
+	ret = imx214_configure_pll(imx214);
+	if (ret) {
+		dev_err(imx214->dev, "failed to configure PLL %d\n", ret);
+		return ret;
+	}
+
+	ret = cci_write(imx214->regmap, IMX214_REG_REQ_LINK_BIT_RATE,
+			IMX214_LINK_BIT_RATE_MBPS(4800), NULL);
+	if (ret) {
+		dev_err(imx214->dev, "failed to configure link bit rate\n");
+		return ret;
+	}
+
 	ret = cci_write(imx214->regmap, IMX214_REG_CSI_LANE_MODE,
 			IMX214_CSI_4_LANE_MODE, NULL);
 	if (ret) {

-- 
2.49.0