[PATCH] dt-bindings: interrupt-controller: Convert marvell,cp110-icu to DT schema

["Rob Herring (Arm)" <robh@kernel.org>]

Convert the Marvell ICU interrupt controller to DT schema format.

Add the missing addressing properties to read and translate child node
addresses.

Drop the legacy binding description and example.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
 .../marvell,cp110-icu.yaml                    |  98 +++++++++++++++
 .../interrupt-controller/marvell,icu.txt      | 112 ------------------
 2 files changed, 98 insertions(+), 112 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/marvell,cp110-icu.yaml
 delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/marvell,icu.txt

diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,cp110-icu.yaml b/Documentation/devicetree/bindings/interrupt-controller/marvell,cp110-icu.yaml
new file mode 100644
index 000000000000..9d4f06f45372
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/marvell,cp110-icu.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/marvell,cp110-icu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+  - Thomas Petazzoni <thomas.petazzoni@bootlin.com>
+
+title: Marvell ICU Interrupt Controller
+
+description:
+  The Marvell ICU (Interrupt Consolidation Unit) controller is responsible for
+  collecting all wired-interrupt sources in the CP and communicating them to the
+  GIC in the AP. The unit translates interrupt requests on input wires to MSG
+  memory mapped transactions to the GIC. These messages access different GIC
+  memory areas depending on their type (NSR, SR, SEI, REI, etc).
+
+properties:
+  compatible:
+    const: marvell,cp110-icu
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  ranges: true
+
+patternProperties:
+  "^interrupt-controller@":
+    type: object
+    description: Interrupt group child nodes
+    additionalProperties: false
+
+    properties:
+      compatible:
+        enum:
+          - marvell,cp110-icu-nsr
+          - marvell,cp110-icu-sr
+          - marvell,cp110-icu-sei
+          - marvell,cp110-icu-rei
+
+      reg:
+        maxItems: 1
+
+      '#interrupt-cells':
+        const: 2
+
+      interrupt-controller: true
+
+      msi-parent:
+        maxItems: 1
+        description: Phandle to the GICP controller
+
+    required:
+      - compatible
+      - reg
+      - '#interrupt-cells'
+      - interrupt-controller
+      - msi-parent
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@1e0000 {
+        compatible = "marvell,cp110-icu";
+        reg = <0x1e0000 0x440>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        interrupt-controller@10 {
+                compatible = "marvell,cp110-icu-nsr";
+                reg = <0x10 0x20>;
+                #interrupt-cells = <2>;
+                interrupt-controller;
+                msi-parent = <&gicp>;
+        };
+
+        interrupt-controller@50 {
+                compatible = "marvell,cp110-icu-sei";
+                reg = <0x50 0x10>;
+                #interrupt-cells = <2>;
+                interrupt-controller;
+                msi-parent = <&sei>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,icu.txt b/Documentation/devicetree/bindings/interrupt-controller/marvell,icu.txt
deleted file mode 100644
index 1c94a57a661e..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/marvell,icu.txt
+++ /dev/null
@@ -1,112 +0,0 @@
-Marvell ICU Interrupt Controller
---------------------------------
-
-The Marvell ICU (Interrupt Consolidation Unit) controller is
-responsible for collecting all wired-interrupt sources in the CP and
-communicating them to the GIC in the AP, the unit translates interrupt
-requests on input wires to MSG memory mapped transactions to the GIC.
-These messages will access a different GIC memory area depending on
-their type (NSR, SR, SEI, REI, etc).
-
-Required properties:
-
-- compatible: Should be "marvell,cp110-icu"
-
-- reg: Should contain ICU registers location and length.
-
-Subnodes: Each group of interrupt is declared as a subnode of the ICU,
-with their own compatible.
-
-Required properties for the icu_nsr/icu_sei subnodes:
-
-- compatible: Should be one of:
-              * "marvell,cp110-icu-nsr"
-	      * "marvell,cp110-icu-sr"
-	      * "marvell,cp110-icu-sei"
-	      * "marvell,cp110-icu-rei"
-
-- #interrupt-cells: Specifies the number of cells needed to encode an
-  interrupt source. The value shall be 2.
-
-  The 1st cell is the index of the interrupt in the ICU unit.
-
-  The 2nd cell is the type of the interrupt. See arm,gic.txt for
-  details.
-
-- interrupt-controller: Identifies the node as an interrupt
-  controller.
-
-- msi-parent: Should point to the GICP controller, the GIC extension
-  that allows to trigger interrupts using MSG memory mapped
-  transactions.
-
-Note: each 'interrupts' property referring to any 'icu_xxx' node shall
-      have a different number within [0:206].
-
-Example:
-
-icu: interrupt-controller@1e0000 {
-	compatible = "marvell,cp110-icu";
-	reg = <0x1e0000 0x440>;
-
-	CP110_LABEL(icu_nsr): interrupt-controller@10 {
-		compatible = "marvell,cp110-icu-nsr";
-		reg = <0x10 0x20>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		msi-parent = <&gicp>;
-	};
-
-	CP110_LABEL(icu_sei): interrupt-controller@50 {
-		compatible = "marvell,cp110-icu-sei";
-		reg = <0x50 0x10>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		msi-parent = <&sei>;
-	};
-};
-
-node1 {
-	interrupt-parent = <&icu_nsr>;
-	interrupts = <106 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-node2 {
-	interrupt-parent = <&icu_sei>;
-	interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-/* Would not work with the above nodes */
-node3 {
-	interrupt-parent = <&icu_nsr>;
-	interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-The legacy bindings were different in this way:
-
-- #interrupt-cells: The value was 3.
-	The 1st cell was the group type of the ICU interrupt. Possible
-	group types were:
-	ICU_GRP_NSR (0x0) : Shared peripheral interrupt, non-secure
-	ICU_GRP_SR  (0x1) : Shared peripheral interrupt, secure
-	ICU_GRP_SEI (0x4) : System error interrupt
-	ICU_GRP_REI (0x5) : RAM error interrupt
-	The 2nd cell was the index of the interrupt in the ICU unit.
-	The 3rd cell was the type of the interrupt. See arm,gic.txt for
-	details.
-
-Example:
-
-icu: interrupt-controller@1e0000 {
-	compatible = "marvell,cp110-icu";
-	reg = <0x1e0000 0x440>;
-
-	#interrupt-cells = <3>;
-	interrupt-controller;
-	msi-parent = <&gicp>;
-};
-
-node1 {
-	interrupt-parent = <&icu>;
-	interrupts = <ICU_GRP_NSR 106 IRQ_TYPE_LEVEL_HIGH>;
-};
-- 
2.47.2