[PATCH v1 00/14] further mt7988 devicetree work

[Frank Wunderlich <linux@fw-web.de>]

From: Frank Wunderlich <frank-w@public-files.de>

This series continues mt7988 devicetree work

- Add SPI with BPI-R4 nand to reach eMMC
- Add thermal protection (fan+cooling-points)
- Extend cpu frequency scaling with CCI
- Basic network-support (ethernet controller + builtin switch + SFP Cages)

depencies (i hope this list is complete and latest patches/series linked):

"Add Bananapi R4 variants and add xsphy" (reviewed, but not yet applied):
https://patchwork.kernel.org/project/linux-mediatek/list/?series=955733

"net: phy: mediatek: do not require syscon compatible for pio property":
https://patchwork.kernel.org/project/netdevbpf/patch/20250510174933.154589-1-linux@fw-web.de/
for phy led function (RFC not yet reviewed, resent without RFC)

for 2.5g phy function (currently disabled):
- net: ethernet: mtk_eth_soc: add support for MT7988 internal 2.5G PHY (already merged to 6.15-net-next)
- net: phy: mediatek: add driver for built-in 2.5G ethernet PHY on MT7988
  https://patchwork.kernel.org/project/netdevbpf/patch/20250219083910.2255981-4-SkyLake.Huang@mediatek.com/
  requested updated patch due to comments

for SFP-Function (macs currently disabled):

PCS clearance which is a 1.5 year discussion currently ongoing

e.g. something like this (one of):
* https://patchwork.kernel.org/project/netdevbpf/patch/20250510102348.14134-4-ansuelsmth@gmail.com/ 
  (changes requested, but no comment on the pcs part)
* https://patchwork.kernel.org/project/netdevbpf/patch/20250415193323.2794214-3-sean.anderson@linux.dev/
  (changes requested)
* https://patchwork.kernel.org/project/netdevbpf/patch/ba4e359584a6b3bc4b3470822c42186d5b0856f9.1721910728.git.daniel@makrotopia.org/

full usxgmii driver:
https://patchwork.kernel.org/project/netdevbpf/patch/07845ec900ba41ff992875dce12c622277592c32.1702352117.git.daniel@makrotopia.org/

first PCS-discussion is here:
https://patchwork.kernel.org/project/netdevbpf/patch/8aa905080bdb6760875d62cb3b2b41258837f80e.1702352117.git.daniel@makrotopia.org/

and then dts nodes for sgmiisys+usxgmii

when above depencies are solved the mac1+2 can be enabled and 2.5G phy and SFP slots will work.

Frank Wunderlich (14):
  dt-bindings: net: mediatek,net: update for mt7988
  dt-bindings: net: dsa: mediatek,mt7530: add dsa-port definition for
    mt7988
  dt-bindings: net: dsa: mediatek,mt7530: add internal mdio bus
  arm64: dts: mediatek: mt7988: add spi controllers
  arm64: dts: mediatek: mt7988: move uart0 and spi1 pins to soc dtsi
  arm64: dts: mediatek: mt7988: add cci node
  arm64: dts: mediatek: mt7988: add phy calibration efuse subnodes
  arm64: dts: mediatek: mt7988: add basic ethernet-nodes
  arm64: dts: mediatek: mt7988: add switch node
  arm64: dts: mediatek: mt7988a-bpi-r4: Add fan and coolingmaps
  arm64: dts: mediatek: mt7988a-bpi-r4: configure spi-nodes
  arm64: dts: mediatek: mt7988a-bpi-r4: add proc-supply for cci
  arm64: dts: mediatek: mt7988a-bpi-r4: add sfp cages and link to gmac
  arm64: dts: mediatek: mt7988a-bpi-r4: configure switch phys and leds

 .../bindings/net/dsa/mediatek,mt7530.yaml     |  17 +-
 .../devicetree/bindings/net/mediatek,net.yaml |   9 +-
 .../mediatek/mt7988a-bananapi-bpi-r4-2g5.dts  |  11 +
 .../dts/mediatek/mt7988a-bananapi-bpi-r4.dts  |  18 +
 .../dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi | 137 +++++-
 arch/arm64/boot/dts/mediatek/mt7988a.dtsi     | 402 +++++++++++++++++-
 6 files changed, 574 insertions(+), 20 deletions(-)

-- 
2.43.0