linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sean Anderson <sean.anderson@linux.dev>
To: netdev@vger.kernel.org, Andrew Lunn <andrew+netdev@lunn.ch>,
	"David S . Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Russell King <linux@armlinux.org.uk>
Cc: upstream@airoha.com, Kory Maincent <kory.maincent@bootlin.com>,
	Simon Horman <horms@kernel.org>,
	Christian Marangi <ansuelsmth@gmail.com>,
	linux-kernel@vger.kernel.org,
	Heiner Kallweit <hkallweit1@gmail.com>,
	Sean Anderson <sean.anderson@linux.dev>
Subject: [net-next PATCH v4 02/11] net: phylink: Support setting PCS link change callbacks
Date: Mon, 12 May 2025 12:10:04 -0400	[thread overview]
Message-ID: <20250512161013.731955-3-sean.anderson@linux.dev> (raw)
In-Reply-To: <20250512161013.731955-1-sean.anderson@linux.dev>

Support changing the link change callback, similar to how PHYs do it.
This will allow the PCS wrapper to forward link changes to the wrapped
PCS.

Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
---

(no changes since v1)

 drivers/net/phy/phylink.c | 24 +++++++-----------------
 include/linux/phylink.h   | 27 ++++++++++++++++++++++-----
 2 files changed, 29 insertions(+), 22 deletions(-)

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index b68369e2342b..67ebd3689b2b 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -1205,6 +1205,8 @@ static void phylink_pcs_neg_mode(struct phylink *pl, struct phylink_pcs *pcs,
 	pl->act_link_an_mode = mode;
 }
 
+static void pcs_change_callback(void *priv, bool up);
+
 static void phylink_major_config(struct phylink *pl, bool restart,
 				  const struct phylink_link_state *state)
 {
@@ -1260,10 +1262,10 @@ static void phylink_major_config(struct phylink *pl, bool restart,
 		phylink_pcs_disable(pl->pcs);
 
 		if (pl->pcs)
-			pl->pcs->phylink = NULL;
-
-		pcs->phylink = pl;
+			pl->pcs->link_change_priv = NULL;
 
+		pcs->link_change = pcs_change_callback;
+		pcs->link_change_priv = pl;
 		pl->pcs = pcs;
 	}
 
@@ -2333,25 +2335,13 @@ void phylink_mac_change(struct phylink *pl, bool up)
 }
 EXPORT_SYMBOL_GPL(phylink_mac_change);
 
-/**
- * phylink_pcs_change() - notify phylink of a change to PCS link state
- * @pcs: pointer to &struct phylink_pcs
- * @up: indicates whether the link is currently up.
- *
- * The PCS driver should call this when the state of its link changes
- * (e.g. link failure, new negotiation results, etc.) Note: it should
- * not determine "up" by reading the BMSR. If in doubt about the link
- * state at interrupt time, then pass true if pcs_get_state() returns
- * the latched link-down state, otherwise pass false.
- */
-void phylink_pcs_change(struct phylink_pcs *pcs, bool up)
+static void pcs_change_callback(void *priv, bool up)
 {
-	struct phylink *pl = pcs->phylink;
+	struct phylink *pl = priv;
 
 	if (pl)
 		phylink_link_changed(pl, up, "pcs");
 }
-EXPORT_SYMBOL_GPL(phylink_pcs_change);
 
 static irqreturn_t phylink_link_handler(int irq, void *data)
 {
diff --git a/include/linux/phylink.h b/include/linux/phylink.h
index 1f5773ab5660..a16282ae746d 100644
--- a/include/linux/phylink.h
+++ b/include/linux/phylink.h
@@ -441,7 +441,8 @@ struct phylink_pcs_ops;
  * @supported_interfaces: describing which PHY_INTERFACE_MODE_xxx
  *                        are supported by this PCS.
  * @ops: a pointer to the &struct phylink_pcs_ops structure
- * @phylink: pointer to &struct phylink_config
+ * @link_change: callback for when the link changes
+ * @link_change_priv: first argument to @link_change
  * @poll: poll the PCS for link changes
  * @rxc_always_on: The MAC driver requires the reference clock
  *                 to always be on. Standalone PCS drivers which
@@ -451,13 +452,14 @@ struct phylink_pcs_ops;
  * This structure is designed to be embedded within the PCS private data,
  * and will be passed between phylink and the PCS.
  *
- * The @phylink member is private to phylink and must not be touched by
- * the PCS driver.
+ * @link_change, @link_change_priv, and @rxc_always_on will be filled in by
+ * phylink.
  */
 struct phylink_pcs {
 	DECLARE_PHY_INTERFACE_MASK(supported_interfaces);
 	const struct phylink_pcs_ops *ops;
-	struct phylink *phylink;
+	void (*link_change)(void *priv, bool up);
+	void *link_change_priv;
 	bool poll;
 	bool rxc_always_on;
 };
@@ -699,7 +701,22 @@ int phylink_set_fixed_link(struct phylink *,
 			   const struct phylink_link_state *);
 
 void phylink_mac_change(struct phylink *, bool up);
-void phylink_pcs_change(struct phylink_pcs *, bool up);
+/**
+ * phylink_pcs_change() - notify phylink of a change to PCS link state
+ * @pcs: pointer to &struct phylink_pcs
+ * @up: indicates whether the link is currently up.
+ *
+ * The PCS driver should call this when the state of its link changes
+ * (e.g. link failure, new negotiation results, etc.) Note: it should
+ * not determine "up" by reading the BMSR. If in doubt about the link
+ * state at interrupt time, then pass true if pcs_get_state() returns
+ * the latched link-down state, otherwise pass false.
+ */
+static inline void phylink_pcs_change(struct phylink_pcs *pcs, bool up)
+{
+	if (pcs->link_change)
+		pcs->link_change(pcs->link_change_priv, up);
+}
 
 int phylink_pcs_pre_init(struct phylink *pl, struct phylink_pcs *pcs);
 
-- 
2.35.1.1320.gc452695387.dirty


  parent reply	other threads:[~2025-05-12 16:10 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-05-12 16:10 [net-next PATCH v4 00/11] Add PCS core support Sean Anderson
2025-05-12 16:10 ` [net-next PATCH v4 01/11] dt-bindings: net: Add Xilinx PCS Sean Anderson
2025-05-12 16:10 ` Sean Anderson [this message]
2025-05-12 16:10 ` [net-next PATCH v4 03/11] net: pcs: Add subsystem Sean Anderson
2025-05-14 16:22   ` Lei Wei
2025-05-19 17:43     ` Sean Anderson
2025-05-21 12:50       ` Lei Wei
2025-05-22 15:14         ` Sean Anderson
2025-05-12 16:10 ` [net-next PATCH v4 04/11] net: dsa: ocelot: suppress PHY device scanning on the internal MDIO bus Sean Anderson
2025-05-12 16:10 ` [net-next PATCH v4 05/11] net: pcs: lynx: Convert to an MDIO driver Sean Anderson
2025-05-12 16:10 ` [net-next PATCH v4 06/11] net: phy: Export some functions Sean Anderson
2025-05-15  2:57   ` Jakub Kicinski
2025-05-15  5:38     ` Heiner Kallweit
2025-05-19 18:17       ` Sean Anderson
2025-05-15  8:12     ` Russell King (Oracle)
2025-05-15  8:39       ` Christian Marangi (Ansuel)
2025-05-19 18:14       ` Sean Anderson
2025-05-19 15:29     ` Sean Anderson
2025-05-12 16:10 ` [net-next PATCH v4 07/11] net: pcs: Add Xilinx PCS driver Sean Anderson
2025-05-14 16:18   ` Lei Wei
2025-05-19 15:31     ` Sean Anderson
2025-05-12 16:10 ` [net-next PATCH v4 08/11] net: axienet: Convert to use PCS subsystem Sean Anderson
2025-05-12 16:14 ` [net-next PATCH v4 09/11] net: macb: Move most of mac_config to mac_prepare Sean Anderson
2025-05-12 16:14   ` [net-next PATCH v4 10/11] net: macb: Support external PCSs Sean Anderson
2025-05-12 16:14   ` [net-next PATCH v4 11/11] of: property: Add device link support for PCS Sean Anderson
2025-05-13 15:29   ` [net-next PATCH v4 09/11] net: macb: Move most of mac_config to mac_prepare Karumanchi, Vineeth
2025-05-13 15:49     ` Sean Anderson
2025-05-15  6:14       ` Karumanchi, Vineeth
2025-05-13 16:40     ` Sean Anderson
2025-05-15  6:20       ` Karumanchi, Vineeth
2025-05-12 17:11 ` [net-next PATCH v4 00/11] Add PCS core support Daniel Golle
2025-05-12 17:15   ` Sean Anderson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250512161013.731955-3-sean.anderson@linux.dev \
    --to=sean.anderson@linux.dev \
    --cc=andrew+netdev@lunn.ch \
    --cc=ansuelsmth@gmail.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=hkallweit1@gmail.com \
    --cc=horms@kernel.org \
    --cc=kory.maincent@bootlin.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=upstream@airoha.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).