[PATCH v2 0/3] dt-bindings: clock: ti: convert to yaml

[PATCH v2 0/3] dt-bindings: clock: ti: convert to yaml

[Sukrut Bellary]

Convert TI autoidle and fixed-factor-clock bindings to yaml. We are fixing
binding warnings only. No change in the existing dts.

Changes in v2:
	Patch 1:
	- Dropped reg and example.
	- Updated description
	- Fixed the subject
	- Fixed line re-wrap.

	Dropped clockdomain.yaml(patch 2 in v1). This will be taken
	  with prcm.txt binding conversion.

	Patch 2:
	- Fixed ti,autoidle.yaml reference.
	- Added constraints.
	- Dropped description from clocks and clock-output-names.

	Patch 3:
	- Restored the license.

Link to v1:
	https://lore.kernel.org/lkml/20250404014500.2789830-1-sbellary@baylibre.com/

Sukrut Bellary (3):
  dt-bindings: clock: ti: Convert autoidle binding to yaml
  dt-bindings: clock: ti: Convert fixed-factor-clock to yaml
  dt-bindings: clock: ti: add ti,autoidle.yaml reference

 .../devicetree/bindings/clock/ti/autoidle.txt | 37 ---------
 .../bindings/clock/ti/fixed-factor-clock.txt  | 42 ----------
 .../bindings/clock/ti/ti,autoidle.yaml        | 34 +++++++++
 .../bindings/clock/ti/ti,divider-clock.yaml   | 22 +-----
 .../clock/ti/ti,fixed-factor-clock.yaml       | 76 +++++++++++++++++++
 5 files changed, 114 insertions(+), 97 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/clock/ti/autoidle.txt
 delete mode 100644 Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt
 create mode 100644 Documentation/devicetree/bindings/clock/ti/ti,autoidle.yaml
 create mode 100644 Documentation/devicetree/bindings/clock/ti/ti,fixed-factor-clock.yaml

-- 
2.34.1

[PATCH v2 1/3] dt-bindings: clock: ti: Convert autoidle binding to yaml

[Sukrut Bellary]

Autoidle clock is not an individual clock; it is always a derivate of some
basic clock like a gate, divider, or fixed-factor. This binding will be
referred in ti,divider-clock.yaml, and ti,fixed-factor-clock.yaml.

As all clocks don't support the autoidle feature e.g.,
in DRA77xx/AM57xx[1], dpll_abe_x2* and dpll_per_x2 don't have
autoidle, remove required properties from the binding.

Add the creator of the original binding as a maintainer.

[1] https://www.ti.com/lit/ug/spruhz6l/spruhz6l.pdf

Signed-off-by: Sukrut Bellary <sbellary@baylibre.com>
---
 .../devicetree/bindings/clock/ti/autoidle.txt | 37 -------------------
 .../bindings/clock/ti/ti,autoidle.yaml        | 34 +++++++++++++++++
 2 files changed, 34 insertions(+), 37 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/clock/ti/autoidle.txt
 create mode 100644 Documentation/devicetree/bindings/clock/ti/ti,autoidle.yaml

diff --git a/Documentation/devicetree/bindings/clock/ti/autoidle.txt b/Documentation/devicetree/bindings/clock/ti/autoidle.txt
deleted file mode 100644
index 05645a10a9e3..000000000000
--- a/Documentation/devicetree/bindings/clock/ti/autoidle.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-Binding for Texas Instruments autoidle clock.
-
-This binding uses the common clock binding[1]. It assumes a register mapped
-clock which can be put to idle automatically by hardware based on the usage
-and a configuration bit setting. Autoidle clock is never an individual
-clock, it is always a derivative of some basic clock like a gate, divider,
-or fixed-factor.
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-- reg : offset for the register controlling the autoidle
-- ti,autoidle-shift : bit shift of the autoidle enable bit
-- ti,invert-autoidle-bit : autoidle is enabled by setting the bit to 0
-
-Examples:
-	dpll_core_m4_ck: dpll_core_m4_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2d38>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_usb_clkdcoldo_ck: dpll_usb_clkdcoldo_ck {
-		#clock-cells = <0>;
-		compatible = "ti,fixed-factor-clock";
-		clocks = <&dpll_usb_ck>;
-		ti,clock-div = <1>;
-		ti,autoidle-shift = <8>;
-		reg = <0x01b4>;
-		ti,clock-mult = <1>;
-		ti,invert-autoidle-bit;
-	};
diff --git a/Documentation/devicetree/bindings/clock/ti/ti,autoidle.yaml b/Documentation/devicetree/bindings/clock/ti/ti,autoidle.yaml
new file mode 100644
index 000000000000..ed1bf182b64d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/ti,autoidle.yaml
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/ti/ti,autoidle.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI autoidle clock
+
+maintainers:
+  - Tero Kristo <kristo@kernel.org>
+  - Sukrut Bellary <sbellary@baylibre.com>
+
+description:
+  Some clocks in TI SoC support the autoidle feature. These properties are
+  applicable only if the clock supports autoidle feature. It assumes a register
+  mapped clock which can be put to idle automatically by hardware based on
+  usage and configuration bit setting. Autoidle clock is never an individual
+  clock, it is always a derivative of some basic clock like a gate, divider, or
+  fixed-factor.
+
+properties:
+  ti,autoidle-shift:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      bit shift of the autoidle enable bit for the clock
+    maximum: 31
+    default: 0
+
+  ti,invert-autoidle-bit:
+    type: boolean
+    description:
+      autoidle is enabled by setting the bit to 0
+
+additionalProperties: true
-- 
2.34.1

[PATCH v2 2/3] dt-bindings: clock: ti: Convert fixed-factor-clock to yaml

[Sukrut Bellary]

This uses the ti,autoidle.yaml for clock autoidle support. Clean up the example
to meet the current standards.

Add the creator of the original binding as a maintainer.

Signed-off-by: Sukrut Bellary <sbellary@baylibre.com>
---
 .../bindings/clock/ti/fixed-factor-clock.txt  | 42 ----------
 .../clock/ti/ti,fixed-factor-clock.yaml       | 76 +++++++++++++++++++
 2 files changed, 76 insertions(+), 42 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt
 create mode 100644 Documentation/devicetree/bindings/clock/ti/ti,fixed-factor-clock.yaml

diff --git a/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt b/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt
deleted file mode 100644
index dc69477b6e98..000000000000
--- a/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-Binding for TI fixed factor rate clock sources.
-
-This binding uses the common clock binding[1], and also uses the autoidle
-support from TI autoidle clock [2].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/clock/ti/autoidle.txt
-
-Required properties:
-- compatible : shall be "ti,fixed-factor-clock".
-- #clock-cells : from common clock binding; shall be set to 0.
-- ti,clock-div: fixed divider.
-- ti,clock-mult: fixed multiplier.
-- clocks: parent clock.
-
-Optional properties:
-- clock-output-names : from common clock binding.
-- ti,autoidle-shift: bit shift of the autoidle enable bit for the clock,
-  see [2]
-- reg: offset for the autoidle register of this clock, see [2]
-- ti,invert-autoidle-bit: autoidle is enabled by setting the bit to 0, see [2]
-- ti,set-rate-parent: clk_set_rate is propagated to parent
-
-Example:
-	clock {
-		compatible = "ti,fixed-factor-clock";
-		clocks = <&parentclk>;
-		#clock-cells = <0>;
-		ti,clock-div = <2>;
-		ti,clock-mult = <1>;
-	};
-
-	dpll_usb_clkdcoldo_ck: dpll_usb_clkdcoldo_ck {
-		#clock-cells = <0>;
-		compatible = "ti,fixed-factor-clock";
-		clocks = <&dpll_usb_ck>;
-		ti,clock-div = <1>;
-		ti,autoidle-shift = <8>;
-		reg = <0x01b4>;
-		ti,clock-mult = <1>;
-		ti,invert-autoidle-bit;
-	};
diff --git a/Documentation/devicetree/bindings/clock/ti/ti,fixed-factor-clock.yaml b/Documentation/devicetree/bindings/clock/ti/ti,fixed-factor-clock.yaml
new file mode 100644
index 000000000000..7a63b0992976
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/ti,fixed-factor-clock.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/ti/ti,fixed-factor-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI fixed factor rate clock sources
+
+maintainers:
+  - Tero Kristo <kristo@kernel.org>
+  - Sukrut Bellary <sbellary@baylibre.com>
+
+description:
+  This consists of a divider and a multiplier used to generate a fixed rate
+  clock. This also uses the autoidle support from TI autoidle clock.
+
+allOf:
+  - $ref: ti,autoidle.yaml#
+
+properties:
+  compatible:
+    const: ti,fixed-factor-clock
+
+  "#clock-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  ti,clock-div:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Fixed divider
+    minimum: 1
+
+  ti,clock-mult:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Fixed multiplier
+    minimum: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-output-names:
+    maxItems: 1
+
+  ti,set-rate-parent:
+    description:
+      Propagate to parent clock
+    type: boolean
+
+required:
+  - compatible
+  - clocks
+  - "#clock-cells"
+  - ti,clock-mult
+  - ti,clock-div
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    bus{
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        clock@1b4 {
+            compatible = "ti,fixed-factor-clock";
+            reg = <0x1b4>;
+            clocks = <&dpll_usb_ck>;
+            #clock-cells = <0>;
+            ti,clock-mult = <1>;
+            ti,clock-div = <1>;
+            ti,autoidle-shift = <8>;
+            ti,invert-autoidle-bit;
+        };
+    };
-- 
2.34.1

[PATCH v2 3/3] dt-bindings: clock: ti: add ti,autoidle.yaml reference

[Sukrut Bellary]

ti,divider-clock uses properties from ti,autoidle.
As we are converting autoidle binding to ti,autoidle.yaml, fix the reference
here.

Signed-off-by: Sukrut Bellary <sbellary@baylibre.com>
---
 .../bindings/clock/ti/ti,divider-clock.yaml   | 22 ++++---------------
 1 file changed, 4 insertions(+), 18 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/ti/ti,divider-clock.yaml b/Documentation/devicetree/bindings/clock/ti/ti,divider-clock.yaml
index 3fbe236eb565..6729fcb839d2 100644
--- a/Documentation/devicetree/bindings/clock/ti/ti,divider-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/ti/ti,divider-clock.yaml
@@ -55,9 +55,10 @@ description: |
   is missing it is the same as supplying a zero shift.
 
   This binding can also optionally provide support to the hardware autoidle
-  feature, see [1].
+  feature.
 
-  [1] Documentation/devicetree/bindings/clock/ti/autoidle.txt
+allOf:
+  - $ref: ti,autoidle.yaml#
 
 properties:
   compatible:
@@ -97,7 +98,6 @@ properties:
     minimum: 1
     default: 1
 
-
   ti,max-div:
     $ref: /schemas/types.yaml#/definitions/uint32
     description:
@@ -116,20 +116,6 @@ properties:
       valid divisor programming must be a power of two,
       only valid if ti,dividers is not defined.
 
-  ti,autoidle-shift:
-    $ref: /schemas/types.yaml#/definitions/uint32
-    description:
-      bit shift of the autoidle enable bit for the clock,
-      see [1].
-    maximum: 31
-    default: 0
-
-  ti,invert-autoidle-bit:
-    type: boolean
-    description:
-      autoidle is enabled by setting the bit to 0,
-      see [1]
-
   ti,set-rate-parent:
     type: boolean
     description:
@@ -156,7 +142,7 @@ required:
   - clocks
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
-- 
2.34.1

Re: [PATCH v2 1/3] dt-bindings: clock: ti: Convert autoidle binding to yaml

[Rob Herring (Arm)]

On Fri, 16 May 2025 01:16:10 -0700, Sukrut Bellary wrote:
> Autoidle clock is not an individual clock; it is always a derivate of some
> basic clock like a gate, divider, or fixed-factor. This binding will be
> referred in ti,divider-clock.yaml, and ti,fixed-factor-clock.yaml.
> 
> As all clocks don't support the autoidle feature e.g.,
> in DRA77xx/AM57xx[1], dpll_abe_x2* and dpll_per_x2 don't have
> autoidle, remove required properties from the binding.
> 
> Add the creator of the original binding as a maintainer.
> 
> [1] https://www.ti.com/lit/ug/spruhz6l/spruhz6l.pdf
> 
> Signed-off-by: Sukrut Bellary <sbellary@baylibre.com>
> ---
>  .../devicetree/bindings/clock/ti/autoidle.txt | 37 -------------------
>  .../bindings/clock/ti/ti,autoidle.yaml        | 34 +++++++++++++++++
>  2 files changed, 34 insertions(+), 37 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/clock/ti/autoidle.txt
>  create mode 100644 Documentation/devicetree/bindings/clock/ti/ti,autoidle.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:


doc reference errors (make refcheckdocs):
Warning: Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt references a file that doesn't exist: Documentation/devicetree/bindings/clock/ti/autoidle.txt
Warning: Documentation/devicetree/bindings/clock/ti/ti,divider-clock.yaml references a file that doesn't exist: Documentation/devicetree/bindings/clock/ti/autoidle.txt
Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt: Documentation/devicetree/bindings/clock/ti/autoidle.txt
Documentation/devicetree/bindings/clock/ti/ti,divider-clock.yaml: Documentation/devicetree/bindings/clock/ti/autoidle.txt

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250516081612.767559-2-sbellary@baylibre.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.

Re: [PATCH v2 0/3] dt-bindings: clock: ti: convert to yaml

[Rob Herring]

On Fri, May 16, 2025 at 01:16:09AM -0700, Sukrut Bellary wrote:
> Convert TI autoidle and fixed-factor-clock bindings to yaml. We are fixing
> binding warnings only. No change in the existing dts.
> 
> Changes in v2:
> 	Patch 1:
> 	- Dropped reg and example.
> 	- Updated description
> 	- Fixed the subject
> 	- Fixed line re-wrap.
> 
> 	Dropped clockdomain.yaml(patch 2 in v1). This will be taken
> 	  with prcm.txt binding conversion.
> 
> 	Patch 2:
> 	- Fixed ti,autoidle.yaml reference.
> 	- Added constraints.
> 	- Dropped description from clocks and clock-output-names.
> 
> 	Patch 3:
> 	- Restored the license.
> 
> Link to v1:
> 	https://lore.kernel.org/lkml/20250404014500.2789830-1-sbellary@baylibre.com/
> 
> Sukrut Bellary (3):
>   dt-bindings: clock: ti: Convert autoidle binding to yaml
>   dt-bindings: clock: ti: Convert fixed-factor-clock to yaml
>   dt-bindings: clock: ti: add ti,autoidle.yaml reference

Reviewed-by: Rob Herring (Arm) <robh@kernel.org>

Re: [PATCH v2 1/3] dt-bindings: clock: ti: Convert autoidle binding to yaml

[Stephen Boyd]

Quoting Sukrut Bellary (2025-05-16 03:16:10)
> Autoidle clock is not an individual clock; it is always a derivate of some
> basic clock like a gate, divider, or fixed-factor. This binding will be
> referred in ti,divider-clock.yaml, and ti,fixed-factor-clock.yaml.
> 
> As all clocks don't support the autoidle feature e.g.,
> in DRA77xx/AM57xx[1], dpll_abe_x2* and dpll_per_x2 don't have
> autoidle, remove required properties from the binding.
> 
> Add the creator of the original binding as a maintainer.
> 
> [1] https://www.ti.com/lit/ug/spruhz6l/spruhz6l.pdf
> 
> Signed-off-by: Sukrut Bellary <sbellary@baylibre.com>
> ---

Applied to clk-next

Re: [PATCH v2 2/3] dt-bindings: clock: ti: Convert fixed-factor-clock to yaml

[Stephen Boyd]

Quoting Sukrut Bellary (2025-05-16 03:16:11)
> This uses the ti,autoidle.yaml for clock autoidle support. Clean up the example
> to meet the current standards.
> 
> Add the creator of the original binding as a maintainer.
> 
> Signed-off-by: Sukrut Bellary <sbellary@baylibre.com>
> ---

Applied to clk-next

Re: [PATCH v2 3/3] dt-bindings: clock: ti: add ti,autoidle.yaml reference

[Stephen Boyd]

Quoting Sukrut Bellary (2025-05-16 03:16:12)
> ti,divider-clock uses properties from ti,autoidle.
> As we are converting autoidle binding to ti,autoidle.yaml, fix the reference
> here.
> 
> Signed-off-by: Sukrut Bellary <sbellary@baylibre.com>
> ---

Applied to clk-next