* [PATCH 0/3] Support i.MX28 Amarula rmm board
@ 2025-05-21 9:28 Dario Binacchi
2025-05-21 9:28 ` [PATCH 1/3] ARM: dts: imx28: add pwm7 muxing options Dario Binacchi
` (3 more replies)
0 siblings, 4 replies; 12+ messages in thread
From: Dario Binacchi @ 2025-05-21 9:28 UTC (permalink / raw)
To: linux-kernel
Cc: linux-amarula, michael, Dario Binacchi, Alexander Stein,
Conor Dooley, Fabio Estevam, Fabio Estevam, Francesco Dolcini,
Frieder Schrempf, Heiko Schocher, Krzysztof Kozlowski,
Marek Vasut, Max Merchel, Michael Walle, Peng Fan,
Pengutronix Kernel Team, Rob Herring, Sascha Hauer, Shawn Guo,
Tim Harvey, devicetree, imx, linux-arm-kernel
The series adds support for i.MX28 Amarula rmm board.
The board includes the following resources:
- 256 Mbytes NAND Flash
- 256 Mbytes SRAM
- LCD-TFT controller
- CAN
- USB 2.0 high-speed/full-speed
- Ethernet MAC
Dario Binacchi (3):
ARM: dts: imx28: add pwm7 muxing options
dt-bindings: arm: fsl: add i.MX28 Amarula rmm board
ARM: dts: mxs: support i.MX28 Amarula rmm board
.../devicetree/bindings/arm/fsl.yaml | 1 +
arch/arm/boot/dts/nxp/mxs/Makefile | 1 +
.../boot/dts/nxp/mxs/imx28-amarula-rmm.dts | 302 ++++++++++++++++++
arch/arm/boot/dts/nxp/mxs/imx28.dtsi | 10 +
4 files changed, 314 insertions(+)
create mode 100644 arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dts
--
2.43.0
base-commit: 4a95bc121ccdaee04c4d72f84dbfa6b880a514b6
branch: imx28-amarula-rmm
^ permalink raw reply [flat|nested] 12+ messages in thread* [PATCH 1/3] ARM: dts: imx28: add pwm7 muxing options 2025-05-21 9:28 [PATCH 0/3] Support i.MX28 Amarula rmm board Dario Binacchi @ 2025-05-21 9:28 ` Dario Binacchi 2025-05-21 9:28 ` [PATCH 2/3] dt-bindings: arm: fsl: add i.MX28 Amarula rmm board Dario Binacchi ` (2 subsequent siblings) 3 siblings, 0 replies; 12+ messages in thread From: Dario Binacchi @ 2025-05-21 9:28 UTC (permalink / raw) To: linux-kernel Cc: linux-amarula, michael, Dario Binacchi, Conor Dooley, Fabio Estevam, Krzysztof Kozlowski, Pengutronix Kernel Team, Rob Herring, Sascha Hauer, Shawn Guo, devicetree, imx, linux-arm-kernel Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> --- arch/arm/boot/dts/nxp/mxs/imx28.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm/boot/dts/nxp/mxs/imx28.dtsi b/arch/arm/boot/dts/nxp/mxs/imx28.dtsi index bbea8b77386f..ece46d0e7c7f 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx28.dtsi +++ b/arch/arm/boot/dts/nxp/mxs/imx28.dtsi @@ -755,6 +755,16 @@ MX28_PAD_PWM4__PWM_4 fsl,pull-up = <MXS_PULL_DISABLE>; }; + pwm7_pins_a: pwm7@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SAIF1_SDATA0__PWM_7 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + lcdif_24bit_pins_a: lcdif-24bit@0 { reg = <0>; fsl,pinmux-ids = < -- 2.43.0 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 2/3] dt-bindings: arm: fsl: add i.MX28 Amarula rmm board 2025-05-21 9:28 [PATCH 0/3] Support i.MX28 Amarula rmm board Dario Binacchi 2025-05-21 9:28 ` [PATCH 1/3] ARM: dts: imx28: add pwm7 muxing options Dario Binacchi @ 2025-05-21 9:28 ` Dario Binacchi 2025-05-21 9:28 ` [PATCH 3/3] ARM: dts: mxs: support " Dario Binacchi 2025-05-21 12:56 ` [PATCH 0/3] Support " Rob Herring (Arm) 3 siblings, 0 replies; 12+ messages in thread From: Dario Binacchi @ 2025-05-21 9:28 UTC (permalink / raw) To: linux-kernel Cc: linux-amarula, michael, Dario Binacchi, Alexander Stein, Conor Dooley, Fabio Estevam, Francesco Dolcini, Frieder Schrempf, Heiko Schocher, Krzysztof Kozlowski, Marek Vasut, Max Merchel, Michael Walle, Peng Fan, Rob Herring, Shawn Guo, Tim Harvey, devicetree The board includes the following resources: - 256 Mbytes NAND Flash - 256 Mbytes SRAM - LCD-TFT controller - CAN - USB 2.0 high-speed/full-speed - Ethernet MAC Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> --- Documentation/devicetree/bindings/arm/fsl.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index 1b90870958a2..b67f0e71e4c8 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -89,6 +89,7 @@ properties: - description: i.MX28 based Boards items: - enum: + - amarula,imx28-rmm - armadeus,imx28-apf28 # APF28 SoM - bluegiga,apx4devkit # Bluegiga APx4 SoM on dev board - crystalfontz,cfa10036 # Crystalfontz CFA-10036 SoM -- 2.43.0 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 3/3] ARM: dts: mxs: support i.MX28 Amarula rmm board 2025-05-21 9:28 [PATCH 0/3] Support i.MX28 Amarula rmm board Dario Binacchi 2025-05-21 9:28 ` [PATCH 1/3] ARM: dts: imx28: add pwm7 muxing options Dario Binacchi 2025-05-21 9:28 ` [PATCH 2/3] dt-bindings: arm: fsl: add i.MX28 Amarula rmm board Dario Binacchi @ 2025-05-21 9:28 ` Dario Binacchi 2025-05-21 9:35 ` Marc Kleine-Budde 2025-05-21 11:40 ` Fabio Estevam 2025-05-21 12:56 ` [PATCH 0/3] Support " Rob Herring (Arm) 3 siblings, 2 replies; 12+ messages in thread From: Dario Binacchi @ 2025-05-21 9:28 UTC (permalink / raw) To: linux-kernel Cc: linux-amarula, michael, Dario Binacchi, Conor Dooley, Fabio Estevam, Krzysztof Kozlowski, Pengutronix Kernel Team, Rob Herring, Sascha Hauer, Shawn Guo, devicetree, imx, linux-arm-kernel The board includes the following resources: - 256 Mbytes NAND Flash - 256 Mbytes SRAM - LCD-TFT controller - CAN - USB 2.0 high-speed/full-speed - Ethernet MAC Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> --- arch/arm/boot/dts/nxp/mxs/Makefile | 1 + .../boot/dts/nxp/mxs/imx28-amarula-rmm.dts | 302 ++++++++++++++++++ 2 files changed, 303 insertions(+) create mode 100644 arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dts diff --git a/arch/arm/boot/dts/nxp/mxs/Makefile b/arch/arm/boot/dts/nxp/mxs/Makefile index 96dd31ea19ba..d72ba702b6fa 100644 --- a/arch/arm/boot/dts/nxp/mxs/Makefile +++ b/arch/arm/boot/dts/nxp/mxs/Makefile @@ -5,6 +5,7 @@ dtb-$(CONFIG_ARCH_MXS) += \ imx23-sansa.dtb \ imx23-stmp378x_devb.dtb \ imx23-xfi3.dtb \ + imx28-amarula-rmm.dtb \ imx28-apf28.dtb \ imx28-apf28dev.dtb \ imx28-apx4devkit.dtb \ diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dts b/arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dts new file mode 100644 index 000000000000..ce6b34e35e1c --- /dev/null +++ b/arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dts @@ -0,0 +1,302 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2025 Amarula Solutions, Dario Binacchi <dario.binacchi@amarulasolutions.com> + */ + +/dts-v1/; +#include "imx28.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "Amarula i.MX28 rmm"; + compatible = "amarula,imx28-rmm", "fsl,imx28"; + + memory@40000000 { + device_type = "memory"; + reg = <0x40000000 0x08000000>; + }; + + reg_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_fec_3v3: regulator-fec-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&fec_3v3_enable_pin>; + regulator-name = "fec-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>; + enable-active-high; + startup-delay-us = <300000>; + vin-supply = <®_5v>; + }; + + reg_usb0_vbus: regulator-usb0-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&usb0_vbus_enable_pin>; + regulator-name = "usb0_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio2 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_usb1_vbus: regulator-usb1-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&usb1_vbus_enable_pin>; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 4 5000000 0>; + brightness-levels = <0 255>; + num-interpolated-steps = <255>; + default-brightness-level = <255>; + power-supply = <®_5v>; + }; + + beeper { + compatible = "pwm-beeper"; + pwms = <&pwm 7 100000 0>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&leds_pins>; + + led-0 { + label = "status"; + gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-1 { + label = "x22_5"; + gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-2 { + label = "x22_4"; + gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; +}; + +&auart0 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_2pins_a>; + status = "okay"; +}; + +&auart1 { + pinctrl-names = "default"; + pinctrl-0 = <&auart1_pins_a>; + status = "okay"; +}; + +&can0 { + pinctrl-names = "default"; + pinctrl-0 = <&can0_pins_a>; + xceiver-supply = <®_3v3>; + status = "okay"; +}; + +&duart { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_b>; + status = "okay"; +}; + +&duart_pins_b { + fsl,voltage = <MXS_VOLTAGE_LOW>; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + polytouch: edt-ft5x06@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + pinctrl-names = "default"; + pinctrl-0 = <&edt_ft5x06_pins &edt_ft5x06_wake_pin>; + interrupt-parent = <&gpio0>; + interrupts = <19 IRQ_TYPE_EDGE_RISING>; + reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; + wake-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>; + }; +}; + +&lradc { + status = "okay"; +}; + +&mac0 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + phy-supply = <®_fec_3v3>; + phy-handle = <ðphy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + max-speed = <100>; + reset-gpios = <&gpio3 28 GPIO_ACTIVE_LOW>; + reset-assert-us = <4000>; + reset-deassert-us = <4000>; + }; + }; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog-0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_RESET__GPIO_3_30 /* LCD reset */ + MX28_PAD_SSP2_SS1__GPIO_2_20 /* External power */ + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + edt_ft5x06_pins: edt-ft5x06-0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_RDY1__GPIO_0_21 /* Reset */ + MX28_PAD_GPMI_CE3N__GPIO_0_19 /* Interrupt */ + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + edt_ft5x06_wake_pin: edt-ft5x06-wake-0 { + reg = <0>; + fsl,pinmux-ids = <MX28_PAD_GPMI_CE2N__GPIO_0_18>; + fsl,drive-strength = <MXS_DRIVE_16mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + fec_3v3_enable_pin: fec-3v3-enable-0 { + reg = <0>; + fsl,pinmux-ids = <MX28_PAD_SPDIF__GPIO_3_27>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + leds_pins: leds-0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP0_DATA7__GPIO_2_7 + MX28_PAD_PWM0__GPIO_3_16 + MX28_PAD_PWM1__GPIO_3_17 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + usb0_vbus_enable_pin: usb0-vbus-enable-0 { + reg = <0>; + fsl,pinmux-ids = <MX28_PAD_SSP0_DATA5__GPIO_2_5>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + usb1_vbus_enable_pin: usb1-vbus-enable-0 { + reg = <0>; + fsl,pinmux-ids = <MX28_PAD_SSP0_DATA6__GPIO_2_6>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm4_pins_a &pwm7_pins_a>; + status = "okay"; +}; + +&ssp0 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>; + status = "okay"; + bus-width = <4>; + broken-cd; +}; + +&usb0 { + status = "okay"; + vbus-supply = <®_usb0_vbus>; + dr_mode = "host"; +}; + +&usb1 { + status = "okay"; + vbus-supply = <®_usb1_vbus>; + dr_mode = "host"; +}; + +&usbphy0 { + status = "okay"; +}; + +&usbphy1 { + status = "okay"; +}; -- 2.43.0 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH 3/3] ARM: dts: mxs: support i.MX28 Amarula rmm board 2025-05-21 9:28 ` [PATCH 3/3] ARM: dts: mxs: support " Dario Binacchi @ 2025-05-21 9:35 ` Marc Kleine-Budde 2025-05-21 10:32 ` Dario Binacchi 2025-05-21 11:40 ` Fabio Estevam 1 sibling, 1 reply; 12+ messages in thread From: Marc Kleine-Budde @ 2025-05-21 9:35 UTC (permalink / raw) To: Dario Binacchi Cc: linux-kernel, Rob Herring, Conor Dooley, devicetree, linux-amarula, Sascha Hauer, imx, Pengutronix Kernel Team, Shawn Guo, Krzysztof Kozlowski, michael, Fabio Estevam, linux-arm-kernel [-- Attachment #1: Type: text/plain, Size: 803 bytes --] On 21.05.2025 11:28:22, Dario Binacchi wrote: > The board includes the following resources: > - 256 Mbytes NAND Flash > - 256 Mbytes SRAM > - LCD-TFT controller > - CAN [...] > +&can0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&can0_pins_a>; > + xceiver-supply = <®_3v3>; Since v6.15-rc1 (d80bfde3c57a ("can: flexcan: add transceiver capabilities")), the flexcan driver supports CAN transceivers via the phy framework, see drivers/phy/phy-can-transceiver.c. Can you make use of it? regards, Marc -- Pengutronix e.K. | Marc Kleine-Budde | Embedded Linux | https://www.pengutronix.de | Vertretung Nürnberg | Phone: +49-5121-206917-129 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-9 | [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 488 bytes --] ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 3/3] ARM: dts: mxs: support i.MX28 Amarula rmm board 2025-05-21 9:35 ` Marc Kleine-Budde @ 2025-05-21 10:32 ` Dario Binacchi 2025-05-21 12:59 ` Marc Kleine-Budde 0 siblings, 1 reply; 12+ messages in thread From: Dario Binacchi @ 2025-05-21 10:32 UTC (permalink / raw) To: Marc Kleine-Budde Cc: linux-kernel, Rob Herring, Conor Dooley, devicetree, linux-amarula, Sascha Hauer, imx, Pengutronix Kernel Team, Shawn Guo, Krzysztof Kozlowski, michael, Fabio Estevam, linux-arm-kernel Hello Marc, On Wed, May 21, 2025 at 11:35 AM Marc Kleine-Budde <mkl@pengutronix.de> wrote: > > On 21.05.2025 11:28:22, Dario Binacchi wrote: > > The board includes the following resources: > > - 256 Mbytes NAND Flash > > - 256 Mbytes SRAM > > - LCD-TFT controller > > - CAN > > [...] > > > +&can0 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&can0_pins_a>; > > + xceiver-supply = <®_3v3>; > > Since v6.15-rc1 (d80bfde3c57a ("can: flexcan: add transceiver > capabilities")), the flexcan driver supports CAN transceivers via the > phy framework, see drivers/phy/phy-can-transceiver.c. Can you make use > of it? The board uses the SN65HVD233 transceiver, which is not listed among those supported by drivers/phy/phy-can-transceiver.c. So I can't use the PHY framework. Do you agree? Or am I missing something? Thanks and regards, Dario > > regards, > Marc > > -- > Pengutronix e.K. | Marc Kleine-Budde | > Embedded Linux | https://www.pengutronix.de | > Vertretung Nürnberg | Phone: +49-5121-206917-129 | > Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-9 | -- Dario Binacchi Senior Embedded Linux Developer dario.binacchi@amarulasolutions.com __________________________________ Amarula Solutions SRL Via Le Canevare 30, 31100 Treviso, Veneto, IT T. +39 042 243 5310 info@amarulasolutions.com www.amarulasolutions.com ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 3/3] ARM: dts: mxs: support i.MX28 Amarula rmm board 2025-05-21 10:32 ` Dario Binacchi @ 2025-05-21 12:59 ` Marc Kleine-Budde 0 siblings, 0 replies; 12+ messages in thread From: Marc Kleine-Budde @ 2025-05-21 12:59 UTC (permalink / raw) To: Dario Binacchi Cc: linux-kernel, Rob Herring, Conor Dooley, devicetree, linux-amarula, Sascha Hauer, imx, Pengutronix Kernel Team, Shawn Guo, Krzysztof Kozlowski, michael, Fabio Estevam, linux-arm-kernel [-- Attachment #1: Type: text/plain, Size: 1415 bytes --] On 21.05.2025 12:32:19, Dario Binacchi wrote: > Hello Marc, > > On Wed, May 21, 2025 at 11:35 AM Marc Kleine-Budde <mkl@pengutronix.de> wrote: > > > > On 21.05.2025 11:28:22, Dario Binacchi wrote: > > > The board includes the following resources: > > > - 256 Mbytes NAND Flash > > > - 256 Mbytes SRAM > > > - LCD-TFT controller > > > - CAN > > > > [...] > > > > > +&can0 { > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&can0_pins_a>; > > > + xceiver-supply = <®_3v3>; > > > > Since v6.15-rc1 (d80bfde3c57a ("can: flexcan: add transceiver > > capabilities")), the flexcan driver supports CAN transceivers via the > > phy framework, see drivers/phy/phy-can-transceiver.c. Can you make use > > of it? > > The board uses the SN65HVD233 transceiver, which is not listed among those > supported by drivers/phy/phy-can-transceiver.c. So I can't use the PHY > framework. Hmmm, okay. Since the SN65HVD233 has features like loopback, we have to think about it more than adding a new compatible to the existing driver. > Do you agree? Ok > Or am I missing something? regards, Marc -- Pengutronix e.K. | Marc Kleine-Budde | Embedded Linux | https://www.pengutronix.de | Vertretung Nürnberg | Phone: +49-5121-206917-129 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-9 | [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 488 bytes --] ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 3/3] ARM: dts: mxs: support i.MX28 Amarula rmm board 2025-05-21 9:28 ` [PATCH 3/3] ARM: dts: mxs: support " Dario Binacchi 2025-05-21 9:35 ` Marc Kleine-Budde @ 2025-05-21 11:40 ` Fabio Estevam 2025-05-21 13:19 ` Dario Binacchi 1 sibling, 1 reply; 12+ messages in thread From: Fabio Estevam @ 2025-05-21 11:40 UTC (permalink / raw) To: Dario Binacchi Cc: linux-kernel, linux-amarula, michael, Conor Dooley, Krzysztof Kozlowski, Pengutronix Kernel Team, Rob Herring, Sascha Hauer, Shawn Guo, devicetree, imx, linux-arm-kernel Hi Dario, On Wed, May 21, 2025 at 6:28 AM Dario Binacchi <dario.binacchi@amarulasolutions.com> wrote: > > The board includes the following resources: > - 256 Mbytes NAND Flash > - 256 Mbytes SRAM SRAM or DDR? > - LCD-TFT controller The LCD support is not described in the dts. > +/ { > + model = "Amarula i.MX28 rmm"; > + compatible = "amarula,imx28-rmm", "fsl,imx28"; > + > + memory@40000000 { > + device_type = "memory"; > + reg = <0x40000000 0x08000000>; In the commit log, you say 256 MB, but here we have 128 MB. > +&i2c0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c0_pins_a>; > + status = "okay"; > + > + polytouch: edt-ft5x06@38 { Node names should be generic: touchscreen@38 > + > +&pinctrl { > + pinctrl-names = "default"; > + pinctrl-0 = <&hog_pins_a>; > + > + hog_pins_a: hog-0 { > + reg = <0>; > + fsl,pinmux-ids = < > + MX28_PAD_LCD_RESET__GPIO_3_30 /* LCD reset */ > + MX28_PAD_SSP2_SS1__GPIO_2_20 /* External power */ Proper panel bindings should better describe these pins than hog pins. Do you plan to add display support? ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 3/3] ARM: dts: mxs: support i.MX28 Amarula rmm board 2025-05-21 11:40 ` Fabio Estevam @ 2025-05-21 13:19 ` Dario Binacchi 2025-05-23 13:05 ` Fabio Estevam 0 siblings, 1 reply; 12+ messages in thread From: Dario Binacchi @ 2025-05-21 13:19 UTC (permalink / raw) To: Fabio Estevam Cc: linux-kernel, linux-amarula, michael, Conor Dooley, Krzysztof Kozlowski, Pengutronix Kernel Team, Rob Herring, Sascha Hauer, Shawn Guo, devicetree, imx, linux-arm-kernel Hi Fabio, On Wed, May 21, 2025 at 1:40 PM Fabio Estevam <festevam@gmail.com> wrote: > > Hi Dario, > > On Wed, May 21, 2025 at 6:28 AM Dario Binacchi > <dario.binacchi@amarulasolutions.com> wrote: > > > > The board includes the following resources: > > - 256 Mbytes NAND Flash > > - 256 Mbytes SRAM > > SRAM or DDR? Sorry, DRAM DDR2 > > > - LCD-TFT controller > > The LCD support is not described in the dts. Yes, you're right. The board has been in use for a long time with a 4.19 kernel. We recently bumped it to the LTS version 6.6.69. However, for now we've had to revert commit f225f1393f034 ("video: fbdev: mxsfb: Remove driver") along with other custom changes to reproduce the correct display behavior in the field. That's why we haven't described the LCD panel yet. We'd like to add it only after we get it working without needing to apply non-mainline patches. The same goes for the sound, which is neither mentioned in the commit description nor in the DTS. So if you're okay with it, I will remove all references to the LCD display — both from the commit message and from the DTS, such as the reset pin, for example. > > > +/ { > > + model = "Amarula i.MX28 rmm"; > > + compatible = "amarula,imx28-rmm", "fsl,imx28"; > > + > > + memory@40000000 { > > + device_type = "memory"; > > + reg = <0x40000000 0x08000000>; > > In the commit log, you say 256 MB, but here we have 128 MB. We have two models, one with 128MB and one with 256MB of RAM. What's the recommended way to handle both cases? Should I define a new DTS file named imx28-amarula-rmm-256mb.dts that includes imx28-amarula-rmm.dts and override the reg property of the memory node? > > > +&i2c0 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&i2c0_pins_a>; > > + status = "okay"; > > + > > + polytouch: edt-ft5x06@38 { > > Node names should be generic: touchscreen@38 Ok > > > + > > +&pinctrl { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&hog_pins_a>; > > + > > + hog_pins_a: hog-0 { > > + reg = <0>; > > + fsl,pinmux-ids = < > > + MX28_PAD_LCD_RESET__GPIO_3_30 /* LCD reset */ > > + MX28_PAD_SSP2_SS1__GPIO_2_20 /* External power */ > > Proper panel bindings should better describe these pins than hog pins. I will drop the LCD reset pin. Thanks and regards, Dario > > Do you plan to add display support? -- Dario Binacchi Senior Embedded Linux Developer dario.binacchi@amarulasolutions.com __________________________________ Amarula Solutions SRL Via Le Canevare 30, 31100 Treviso, Veneto, IT T. +39 042 243 5310 info@amarulasolutions.com www.amarulasolutions.com ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 3/3] ARM: dts: mxs: support i.MX28 Amarula rmm board 2025-05-21 13:19 ` Dario Binacchi @ 2025-05-23 13:05 ` Fabio Estevam 0 siblings, 0 replies; 12+ messages in thread From: Fabio Estevam @ 2025-05-23 13:05 UTC (permalink / raw) To: Dario Binacchi Cc: linux-kernel, linux-amarula, michael, Conor Dooley, Krzysztof Kozlowski, Pengutronix Kernel Team, Rob Herring, Sascha Hauer, Shawn Guo, devicetree, imx, linux-arm-kernel Hi Dario, On Wed, May 21, 2025 at 10:20 AM Dario Binacchi <dario.binacchi@amarulasolutions.com> wrote: > So if you're okay with it, I will remove all references to the LCD > display — both from the commit > message and from the DTS, such as the reset pin, for example. Yes, that's OK. > We have two models, one with 128MB and one with 256MB of RAM. > What's the recommended way to handle both cases? > Should I define a new DTS file named imx28-amarula-rmm-256mb.dts > that includes imx28-amarula-rmm.dts and override the reg property of > the memory node? Or maybe you can describe 128MB in the dts and let the bootloader run a fixup on the memory size, adjusting it if needed? ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 0/3] Support i.MX28 Amarula rmm board 2025-05-21 9:28 [PATCH 0/3] Support i.MX28 Amarula rmm board Dario Binacchi ` (2 preceding siblings ...) 2025-05-21 9:28 ` [PATCH 3/3] ARM: dts: mxs: support " Dario Binacchi @ 2025-05-21 12:56 ` Rob Herring (Arm) 2025-05-28 8:40 ` Dario Binacchi 3 siblings, 1 reply; 12+ messages in thread From: Rob Herring (Arm) @ 2025-05-21 12:56 UTC (permalink / raw) To: Dario Binacchi Cc: Michael Walle, devicetree, linux-arm-kernel, Marek Vasut, Max Merchel, Sascha Hauer, Krzysztof Kozlowski, Frieder Schrempf, Fabio Estevam, Peng Fan, Shawn Guo, Conor Dooley, Francesco Dolcini, Tim Harvey, Alexander Stein, Fabio Estevam, Heiko Schocher, Pengutronix Kernel Team, imx, linux-amarula, linux-kernel, michael On Wed, 21 May 2025 11:28:19 +0200, Dario Binacchi wrote: > The series adds support for i.MX28 Amarula rmm board. > > The board includes the following resources: > - 256 Mbytes NAND Flash > - 256 Mbytes SRAM > - LCD-TFT controller > - CAN > - USB 2.0 high-speed/full-speed > - Ethernet MAC > > > Dario Binacchi (3): > ARM: dts: imx28: add pwm7 muxing options > dt-bindings: arm: fsl: add i.MX28 Amarula rmm board > ARM: dts: mxs: support i.MX28 Amarula rmm board > > .../devicetree/bindings/arm/fsl.yaml | 1 + > arch/arm/boot/dts/nxp/mxs/Makefile | 1 + > .../boot/dts/nxp/mxs/imx28-amarula-rmm.dts | 302 ++++++++++++++++++ > arch/arm/boot/dts/nxp/mxs/imx28.dtsi | 10 + > 4 files changed, 314 insertions(+) > create mode 100644 arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dts > > -- > 2.43.0 > > base-commit: 4a95bc121ccdaee04c4d72f84dbfa6b880a514b6 > branch: imx28-amarula-rmm > > My bot found new DTB warnings on the .dts files added or changed in this series. Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings are fixed by another series. Ultimately, it is up to the platform maintainer whether these warnings are acceptable or not. No need to reply unless the platform maintainer has comments. If you already ran DT checks and didn't see these error(s), then make sure dt-schema is up to date: pip3 install dtschema --upgrade This patch series was applied (using b4) to base: Base: using specified base-commit 4a95bc121ccdaee04c4d72f84dbfa6b880a514b6 If this is not the correct base, please add 'base-commit' tag (or use b4 which does this automatically) New warnings running 'make CHECK_DTBS=y for arch/arm/boot/dts/nxp/' for 20250521092826.1035448-1-dario.binacchi@amarulasolutions.com: arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dtb: /apb@80000000/apbh-bus@80000000/interrupt-controller@80000000: failed to match any schema with compatible: ['fsl,imx28-icoll', 'fsl,icoll'] arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dtb: /apb@80000000/apbh-bus@80000000/interrupt-controller@80000000: failed to match any schema with compatible: ['fsl,imx28-icoll', 'fsl,icoll'] arch/arm/boot/dts/nxp/mxs/imx28-xea.dtb: spi@80010000 (fsl,imx28-mmc): $nodename:0: 'spi@80010000' does not match '^mmc(@.*)?$' from schema $id: http://devicetree.org/schemas/mmc/mxs-mmc.yaml# arch/arm/boot/dts/nxp/mxs/imx28-duckbill-2-spi.dtb: pinctrl@80018000 (fsl,imx28-pinctrl): 'auart0-2pins@0', 'auart0@0', 'auart1-2pins@0', 'auart1@0', 'auart2-2pins@0', 'auart2-2pins@1', 'auart2-pins@0', 'auart3-2pins@0', 'auart3-2pins@1', 'auart3@0', 'auart4@0', 'auart4@1', 'can0@0', 'can1@0', 'duart-4pins@0', 'duart@0', 'duart@1', 'gpmi-nand@0', 'gpmi-status-cfg@0', 'hog@0', 'i2c0@0', 'i2c0@1', 'i2c1@0', 'i2c1@1', 'lcdif-16bit@0', 'lcdif-18bit@0', 'lcdif-24bit@0', 'lcdif-sync@0', 'leds@0', 'mac0-phy-int@0', 'mac0-phy-reset@0', 'mac0@0', 'mac0@1', 'mac1@0', 'mmc0-4bit@0', 'mmc0-8bit@0', 'mmc0-cd-cfg@0', 'mmc0-sck-cfg@0', 'mmc1-4bit@0', 'mmc1-cd-cfg@0', 'mmc1-sck-cfg@0', 'mmc2-4bit@0', 'mmc2-4bit@1', 'mmc2-cd-cfg@0', 'mmc2-sck-cfg@0', 'mmc2-sck-cfg@1', 'pwm0@0', 'pwm2@0', 'pwm3@0', 'pwm3@1', 'pwm4@0', 'pwm7@0', 'qca7000@0', 'saif0@0', 'saif0@1', 'saif1@0', 'spi2@0', 'spi3@0', 'spi3@1', 'usb0@0', 'usb0@1', 'usb0id1@0', 'usb0id@0', 'usb1@0', 'usb1@1' do not match any of the regexes: '^pinctrl-[0-9]+$', 'gpio@[0-9]+$' from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dtb: nand-controller@8000c000 (fsl,imx28-gpmi-nand): #size-cells: 0 was expected from schema $id: http://devicetree.org/schemas/mtd/gpmi-nand.yaml# arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dtb: nand-controller@8000c000 (fsl,imx28-gpmi-nand): Unevaluated properties are not allowed ('#address-cells', '#size-cells' were unexpected) from schema $id: http://devicetree.org/schemas/mtd/gpmi-nand.yaml# arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dtb: nand-controller@8000c000 (fsl,imx28-gpmi-nand): #size-cells: 0 was expected from schema $id: http://devicetree.org/schemas/mtd/nand-controller.yaml# arch/arm/boot/dts/nxp/mxs/imx28-cfa10056.dtb: pinctrl@80018000 (fsl,imx28-pinctrl): 'auart0-2pins@0', 'auart0@0', 'auart1-2pins@0', 'auart1@0', 'auart2-2pins@0', 'auart2-2pins@1', 'auart2-pins@0', 'auart3-2pins@0', 'auart3-2pins@1', 'auart3@0', 'auart4@0', 'auart4@1', 'can0@0', 'can1@0', 'duart-4pins@0', 'duart@0', 'duart@1', 'gpmi-nand@0', 'gpmi-status-cfg@0', 'i2c0@0', 'i2c0@1', 'i2c1@0', 'i2c1@1', 'lcdif-10056-pullup@0', 'lcdif-10056@0', 'lcdif-16bit@0', 'lcdif-18bit@0', 'lcdif-24bit@0', 'lcdif-sync@0', 'leds-10036@0', 'mac0-10037@0', 'mac0@0', 'mac0@1', 'mac1@0', 'mmc0-4bit@0', 'mmc0-8bit@0', 'mmc0-cd-cfg@0', 'mmc0-sck-cfg@0', 'mmc1-4bit@0', 'mmc1-cd-cfg@0', 'mmc1-sck-cfg@0', 'mmc2-4bit@0', 'mmc2-4bit@1', 'mmc2-cd-cfg@0', 'mmc2-sck-cfg@0', 'mmc2-sck-cfg@1', 'mmc_pwr_cfa10036@0', 'otg-10036@0', 'pwm0@0', 'pwm2@0', 'pwm3@0', 'pwm3@1', 'pwm4@0', 'pwm7@0', 'saif0@0', 'saif0@1', 'saif1@0', 'spi2-cfa10056@0', 'spi2@0', 'spi3@0', 'spi3@1', 'ssd1306-10036@0', 'usb-10037@0', 'usb0@0', 'usb0@1', 'usb0id1@0', 'usb0id@0', 'usb1@0', 'usb1@1' do not match any of the regexes: '^pinctrl-[0-9]+$', 'gpio@[0-9]+$' from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dtb: spi@80010000 (fsl,imx28-mmc): $nodename:0: 'spi@80010000' does not match '^mmc(@.*)?$' from schema $id: http://devicetree.org/schemas/mmc/mxs-mmc.yaml# arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dtb: spi@80010000 (fsl,imx28-mmc): Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'broken-cd', 'bus-width', 'clocks' were unexpected) from schema $id: http://devicetree.org/schemas/mmc/mxs-mmc.yaml# arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dtb: pinctrl@80018000 (fsl,imx28-pinctrl): 'auart0-2pins@0', 'auart0@0', 'auart1-2pins@0', 'auart1@0', 'auart2-2pins@0', 'auart2-2pins@1', 'auart2-pins@0', 'auart3-2pins@0', 'auart3-2pins@1', 'auart3@0', 'auart4@0', 'auart4@1', 'can0@0', 'can1@0', 'duart-4pins@0', 'duart@0', 'duart@1', 'edt-ft5x06-0', 'edt-ft5x06-wake-0', 'fec-3v3-enable-0', 'gpmi-nand@0', 'gpmi-status-cfg@0', 'hog-0', 'i2c0@0', 'i2c0@1', 'i2c1@0', 'i2c1@1', 'lcdif-16bit@0', 'lcdif-18bit@0', 'lcdif-24bit@0', 'lcdif-sync@0', 'leds-0', 'mac0@0', 'mac0@1', 'mac1@0', 'mmc0-4bit@0', 'mmc0-8bit@0', 'mmc0-cd-cfg@0', 'mmc0-sck-cfg@0', 'mmc1-4bit@0', 'mmc1-cd-cfg@0', 'mmc1-sck-cfg@0', 'mmc2-4bit@0', 'mmc2-4bit@1', 'mmc2-cd-cfg@0', 'mmc2-sck-cfg@0', 'mmc2-sck-cfg@1', 'pwm0@0', 'pwm2@0', 'pwm3@0', 'pwm3@1', 'pwm4@0', 'pwm7@0', 'saif0@0', 'saif0@1', 'saif1@0', 'spi2@0', 'spi3@0', 'spi3@1', 'usb0-vbus-enable-0', 'usb0@0', 'usb0@1', 'usb0id1@0', 'usb0id@0', 'usb1-vbus-enable-0', 'usb1@0', 'usb1@1' do not match any of the regexes: '^pinctrl-[0-9]+$', 'gpio@[0-9]+$' from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dtb: pinctrl@80018000 (fsl,imx28-pinctrl): compatible: ['fsl,imx28-pinctrl', 'simple-bus'] is too long from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# arch/arm/boot/dts/nxp/mxs/imx28-xea.dtb: pinctrl@80018000 (fsl,imx28-pinctrl): 'auart0-2pins@0', 'auart0@0', 'auart1-2pins@0', 'auart1@0', 'auart2-2pins@0', 'auart2-2pins@1', 'auart2-pins@0', 'auart3-2pins@0', 'auart3-2pins@1', 'auart3@0', 'auart4@0', 'auart4@1', 'can0@0', 'can1@0', 'duart-4pins@0', 'duart@0', 'duart@1', 'gpmi-nand@0', 'gpmi-status-cfg@0', 'hog@0', 'hog@1', 'hog@2', 'i2c0@0', 'i2c0@1', 'i2c1@0', 'i2c1@1', 'lcdif-16bit@0', 'lcdif-18bit@0', 'lcdif-24bit@0', 'lcdif-sync@0', 'mac0@0', 'mac0@1', 'mac1@0', 'mmc0-4bit@0', 'mmc0-8bit@0', 'mmc0-cd-cfg@0', 'mmc0-sck-cfg@0', 'mmc1-4bit@0', 'mmc1-cd-cfg@0', 'mmc1-sck-cfg@0', 'mmc2-4bit@0', 'mmc2-4bit@1', 'mmc2-cd-cfg@0', 'mmc2-sck-cfg@0', 'mmc2-sck-cfg@1', 'pwm0@0', 'pwm2@0', 'pwm3@0', 'pwm3@1', 'pwm4@0', 'pwm7@0', 'saif0@0', 'saif0@1', 'saif1@0', 'spi2@0', 'spi3@0', 'spi3@1', 'usb0@0', 'usb0@1', 'usb0id1@0', 'usb0id@0', 'usb1@0', 'usb1@1' do not match any of the regexes: '^pinctrl-[0-9]+$', 'gpio@[0-9]+$' from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# arch/arm/boot/dts/nxp/mxs/imx28-cfa10037.dtb: pinctrl@80018000 (fsl,imx28-pinctrl): 'auart0-2pins@0', 'auart0@0', 'auart1-2pins@0', 'auart1@0', 'auart2-2pins@0', 'auart2-2pins@1', 'auart2-pins@0', 'auart3-2pins@0', 'auart3-2pins@1', 'auart3@0', 'auart4@0', 'auart4@1', 'can0@0', 'can1@0', 'duart-4pins@0', 'duart@0', 'duart@1', 'gpmi-nand@0', 'gpmi-status-cfg@0', 'i2c0@0', 'i2c0@1', 'i2c1@0', 'i2c1@1', 'lcdif-16bit@0', 'lcdif-18bit@0', 'lcdif-24bit@0', 'lcdif-sync@0', 'leds-10036@0', 'mac0-10037@0', 'mac0@0', 'mac0@1', 'mac1@0', 'mmc0-4bit@0', 'mmc0-8bit@0', 'mmc0-cd-cfg@0', 'mmc0-sck-cfg@0', 'mmc1-4bit@0', 'mmc1-cd-cfg@0', 'mmc1-sck-cfg@0', 'mmc2-4bit@0', 'mmc2-4bit@1', 'mmc2-cd-cfg@0', 'mmc2-sck-cfg@0', 'mmc2-sck-cfg@1', 'mmc_pwr_cfa10036@0', 'otg-10036@0', 'pwm0@0', 'pwm2@0', 'pwm3@0', 'pwm3@1', 'pwm4@0', 'pwm7@0', 'saif0@0', 'saif0@1', 'saif1@0', 'spi2@0', 'spi3@0', 'spi3@1', 'ssd1306-10036@0', 'usb-10037@0', 'usb0@0', 'usb0@1', 'usb0id1@0', 'usb0id@0', 'usb1@0', 'usb1@1' do not match any of the regexes: '^pinctrl-[0-9]+$', 'gpio@[0-9]+$' from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# arch/arm/boot/dts/nxp/mxs/imx28-apx4devkit.dtb: pinctrl@80018000 (fsl,imx28-pinctrl): 'auart0-2pins@0', 'auart0@0', 'auart1-2pins@0', 'auart1@0', 'auart2-2pins@0', 'auart2-2pins@1', 'auart2-pins@0', 'auart3-2pins@0', 'auart3-2pins@1', 'auart3@0', 'auart4@0', 'auart4@1', 'can0@0', 'can1@0', 'duart-4pins@0', 'duart@0', 'duart@1', 'gpmi-nand@0', 'gpmi-status-cfg@0', 'hog@0', 'i2c0@0', 'i2c0@1', 'i2c1@0', 'i2c1@1', 'lcdif-16bit@0', 'lcdif-18bit@0', 'lcdif-24bit@0', 'lcdif-apx4@0', 'lcdif-sync@0', 'mac0@0', 'mac0@1', 'mac1@0', 'mmc0-4bit@0', 'mmc0-8bit@0', 'mmc0-cd-cfg@0', 'mmc0-sck-cfg@0', 'mmc1-4bit@0', 'mmc1-cd-cfg@0', 'mmc1-sck-cfg@0', 'mmc2-4bit-apx4@0', 'mmc2-4bit@0', 'mmc2-4bit@1', 'mmc2-cd-cfg@0', 'mmc2-sck-cfg-apx4@0', 'mmc2-sck-cfg@0', 'mmc2-sck-cfg@1', 'pwm0@0', 'pwm2@0', 'pwm3@0', 'pwm3@1', 'pwm4@0', 'pwm7@0', 'saif0@0', 'saif0@1', 'saif1@0', 'spi2@0', 'spi3@0', 'spi3@1', 'usb0@0', 'usb0@1', 'usb0id1@0', 'usb0id@0', 'usb1@0', 'usb1@1' do not match any of the regexes: '^pinctrl-[0-9]+$', 'gpio@[0-9]+$' from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# arch/arm/boot/dts/nxp/mxs/imx28-btt3-0.dtb: pinctrl@80018000 (fsl,imx28-pinctrl): 'auart0-2pins@0', 'auart0@0', 'auart1-2pins@0', 'auart1@0', 'auart2-2pins@0', 'auart2-2pins@1', 'auart2-pins@0', 'auart3-2pins@0', 'auart3-2pins@1', 'auart3@0', 'auart4@0', 'auart4@1', 'can0@0', 'can1@0', 'duart-4pins@0', 'duart@0', 'duart@1', 'gpmi-nand@0', 'gpmi-status-cfg@0', 'hog@0', 'hog@1', 'i2c0@0', 'i2c0@1', 'i2c1@0', 'i2c1@1', 'keypad-bttc@0', 'lcdif-16bit@0', 'lcdif-18bit@0', 'lcdif-24bit@0', 'lcdif-bttc@0', 'lcdif-bttc@1', 'lcdif-sync@0', 'mac0@0', 'mac0@1', 'mac1@0', 'mmc0-4bit@0', 'mmc0-8bit@0', 'mmc0-cd-cfg@0', 'mmc0-sck-cfg@0', 'mmc1-4bit@0', 'mmc1-cd-cfg@0', 'mmc1-sck-cfg@0', 'mmc2-4bit@0', 'mmc2-4bit@1', 'mmc2-cd-cfg@0', 'mmc2-sck-cfg@0', 'mmc2-sck-cfg@1', 'pwm0@0', 'pwm2@0', 'pwm3@0', 'pwm3@1', 'pwm4@0', 'pwm7@0', 'saif0@0', 'saif0@1', 'saif1@0', 'spi2@0', 'spi3@0', 'spi3@1', 'ssp1-sdio@0', 'usb0@0', 'usb0@1', 'usb0id1@0', 'usb0id@0', 'usb1@0', 'usb1@1', 'wifi-en-pin@0' do not match any of the regexes: '^pinctrl-[0-9]+$', 'gpio@[0-9]+$' from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# arch/arm/boot/dts/nxp/mxs/imx28-tx28.dtb: pinctrl@80018000 (fsl,imx28-pinctrl): 'auart0-2pins@0', 'auart0@0', 'auart1-2pins@0', 'auart1@0', 'auart2-2pins@0', 'auart2-2pins@1', 'auart2-pins@0', 'auart3-2pins@0', 'auart3-2pins@1', 'auart3@0', 'auart4@0', 'auart4@1', 'can0@0', 'can1@0', 'duart-4pins@0', 'duart@0', 'duart@1', 'gpmi-nand@0', 'gpmi-status-cfg@0', 'hog@0', 'i2c0@0', 'i2c0@1', 'i2c1@0', 'i2c1@1', 'lcdif-16bit@0', 'lcdif-18bit@0', 'lcdif-24bit@0', 'lcdif-sync@0', 'mac0@0', 'mac0@1', 'mac1@0', 'mmc0-4bit@0', 'mmc0-8bit@0', 'mmc0-cd-cfg@0', 'mmc0-sck-cfg@0', 'mmc1-4bit@0', 'mmc1-cd-cfg@0', 'mmc1-sck-cfg@0', 'mmc2-4bit@0', 'mmc2-4bit@1', 'mmc2-cd-cfg@0', 'mmc2-sck-cfg@0', 'mmc2-sck-cfg@1', 'pwm0@0', 'pwm2@0', 'pwm3@0', 'pwm3@1', 'pwm4@0', 'pwm7@0', 'saif0@0', 'saif0@1', 'saif1@0', 'spi-gpiogrp@0', 'spi2@0', 'spi3@0', 'spi3@1', 'tx28-edt-ft5x06-pins@0', 'tx28-flexcan-xcvr-pins@0', 'tx28-lcdif-23bit@0', 'tx28-lcdif-ctrl@0', 'tx28-mac0-gpio-pins@0', 'tx28-pca9554-pins@0', 'tx28-tsc2007-pins@0', 'tx28-usbphy0-pins@0', 'tx28-usbphy1-pins@0', 'usb0@0', 'usb0@1', 'usb0id1@0', 'usb0id@0', 'usb1@0', 'usb1@1' do not match any of the regexes: '^pinctrl-[0-9]+$', 'gpio@[0-9]+$' from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dtb: /apb@80000000/apbh-bus@80000000/digctl@8001c000: failed to match any schema with compatible: ['fsl,imx28-digctl', 'fsl,imx23-digctl'] arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dtb: /apb@80000000/apbh-bus@80000000/digctl@8001c000: failed to match any schema with compatible: ['fsl,imx28-digctl', 'fsl,imx23-digctl'] arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dtb: /apb@80000000/apbx-bus@80040000/lradc@80050000: failed to match any schema with compatible: ['fsl,imx28-lradc'] arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dtb: /apb@80000000/apbx-bus@80040000/i2c@80058000/edt-ft5x06@38: failed to match any schema with compatible: ['edt,edt-ft5x06'] arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dtb: /apb@80000000/apbx-bus@80040000/timrot@80068000: failed to match any schema with compatible: ['fsl,imx28-timrot', 'fsl,timrot'] arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dtb: /apb@80000000/apbx-bus@80040000/timrot@80068000: failed to match any schema with compatible: ['fsl,imx28-timrot', 'fsl,timrot'] arch/arm/boot/dts/nxp/mxs/imx28-duckbill-2-enocean.dtb: pinctrl@80018000 (fsl,imx28-pinctrl): 'auart0-2pins@0', 'auart0@0', 'auart1-2pins@0', 'auart1@0', 'auart2-2pins@0', 'auart2-2pins@1', 'auart2-pins@0', 'auart3-2pins@0', 'auart3-2pins@1', 'auart3@0', 'auart4@0', 'auart4@1', 'can0@0', 'can1@0', 'duart-4pins@0', 'duart@0', 'duart@1', 'enocean-button@0', 'gpmi-nand@0', 'gpmi-status-cfg@0', 'hog@0', 'i2c0@0', 'i2c0@1', 'i2c1@0', 'i2c1@1', 'lcdif-16bit@0', 'lcdif-18bit@0', 'lcdif-24bit@0', 'lcdif-sync@0', 'leds@0', 'mac0-phy-int@0', 'mac0-phy-reset@0', 'mac0@0', 'mac0@1', 'mac1@0', 'mmc0-4bit@0', 'mmc0-8bit@0', 'mmc0-cd-cfg@0', 'mmc0-sck-cfg@0', 'mmc1-4bit@0', 'mmc1-cd-cfg@0', 'mmc1-sck-cfg@0', 'mmc2-4bit@0', 'mmc2-4bit@1', 'mmc2-cd-cfg@0', 'mmc2-sck-cfg@0', 'mmc2-sck-cfg@1', 'pwm0@0', 'pwm2@0', 'pwm3@0', 'pwm3@1', 'pwm4@0', 'pwm7@0', 'saif0@0', 'saif0@1', 'saif1@0', 'spi2@0', 'spi3@0', 'spi3@1', 'usb0@0', 'usb0@1', 'usb0id1@0', 'usb0id@0', 'usb1@0', 'usb1@1' do not match any of the regexes: '^pinctrl-[0-9]+$', 'gpio@[0-9]+$' from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# arch/arm/boot/dts/nxp/mxs/imx28-cfa10036.dtb: pinctrl@80018000 (fsl,imx28-pinctrl): 'auart0-2pins@0', 'auart0@0', 'auart1-2pins@0', 'auart1@0', 'auart2-2pins@0', 'auart2-2pins@1', 'auart2-pins@0', 'auart3-2pins@0', 'auart3-2pins@1', 'auart3@0', 'auart4@0', 'auart4@1', 'can0@0', 'can1@0', 'duart-4pins@0', 'duart@0', 'duart@1', 'gpmi-nand@0', 'gpmi-status-cfg@0', 'i2c0@0', 'i2c0@1', 'i2c1@0', 'i2c1@1', 'lcdif-16bit@0', 'lcdif-18bit@0', 'lcdif-24bit@0', 'lcdif-sync@0', 'leds-10036@0', 'mac0@0', 'mac0@1', 'mac1@0', 'mmc0-4bit@0', 'mmc0-8bit@0', 'mmc0-cd-cfg@0', 'mmc0-sck-cfg@0', 'mmc1-4bit@0', 'mmc1-cd-cfg@0', 'mmc1-sck-cfg@0', 'mmc2-4bit@0', 'mmc2-4bit@1', 'mmc2-cd-cfg@0', 'mmc2-sck-cfg@0', 'mmc2-sck-cfg@1', 'mmc_pwr_cfa10036@0', 'otg-10036@0', 'pwm0@0', 'pwm2@0', 'pwm3@0', 'pwm3@1', 'pwm4@0', 'pwm7@0', 'saif0@0', 'saif0@1', 'saif1@0', 'spi2@0', 'spi3@0', 'spi3@1', 'ssd1306-10036@0', 'usb0@0', 'usb0@1', 'usb0id1@0', 'usb0id@0', 'usb1@0', 'usb1@1' do not match any of the regexes: '^pinctrl-[0-9]+$', 'gpio@[0-9]+$' from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# arch/arm/boot/dts/nxp/mxs/imx28-apf28.dtb: pinctrl@80018000 (fsl,imx28-pinctrl): 'auart0-2pins@0', 'auart0@0', 'auart1-2pins@0', 'auart1@0', 'auart2-2pins@0', 'auart2-2pins@1', 'auart2-pins@0', 'auart3-2pins@0', 'auart3-2pins@1', 'auart3@0', 'auart4@0', 'auart4@1', 'can0@0', 'can1@0', 'duart-4pins@0', 'duart@0', 'duart@1', 'gpmi-nand@0', 'gpmi-status-cfg@0', 'i2c0@0', 'i2c0@1', 'i2c1@0', 'i2c1@1', 'lcdif-16bit@0', 'lcdif-18bit@0', 'lcdif-24bit@0', 'lcdif-sync@0', 'mac0@0', 'mac0@1', 'mac1@0', 'mmc0-4bit@0', 'mmc0-8bit@0', 'mmc0-cd-cfg@0', 'mmc0-sck-cfg@0', 'mmc1-4bit@0', 'mmc1-cd-cfg@0', 'mmc1-sck-cfg@0', 'mmc2-4bit@0', 'mmc2-4bit@1', 'mmc2-cd-cfg@0', 'mmc2-sck-cfg@0', 'mmc2-sck-cfg@1', 'pwm0@0', 'pwm2@0', 'pwm3@0', 'pwm3@1', 'pwm4@0', 'pwm7@0', 'saif0@0', 'saif0@1', 'saif1@0', 'spi2@0', 'spi3@0', 'spi3@1', 'usb0@0', 'usb0@1', 'usb0id1@0', 'usb0id@0', 'usb1@0', 'usb1@1' do not match any of the regexes: '^pinctrl-[0-9]+$', 'gpio@[0-9]+$' from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# arch/arm/boot/dts/nxp/mxs/imx28-duckbill.dtb: pinctrl@80018000 (fsl,imx28-pinctrl): 'auart0-2pins@0', 'auart0@0', 'auart1-2pins@0', 'auart1@0', 'auart2-2pins@0', 'auart2-2pins@1', 'auart2-pins@0', 'auart3-2pins@0', 'auart3-2pins@1', 'auart3@0', 'auart4@0', 'auart4@1', 'can0@0', 'can1@0', 'duart-4pins@0', 'duart@0', 'duart@1', 'gpmi-nand@0', 'gpmi-status-cfg@0', 'hog@0', 'i2c0@0', 'i2c0@1', 'i2c1@0', 'i2c1@1', 'lcdif-16bit@0', 'lcdif-18bit@0', 'lcdif-24bit@0', 'lcdif-sync@0', 'leds@0', 'mac0-phy-reset@0', 'mac0@0', 'mac0@1', 'mac1@0', 'mmc0-4bit@0', 'mmc0-8bit@0', 'mmc0-cd-cfg@0', 'mmc0-sck-cfg@0', 'mmc1-4bit@0', 'mmc1-cd-cfg@0', 'mmc1-sck-cfg@0', 'mmc2-4bit@0', 'mmc2-4bit@1', 'mmc2-cd-cfg@0', 'mmc2-sck-cfg@0', 'mmc2-sck-cfg@1', 'pwm0@0', 'pwm2@0', 'pwm3@0', 'pwm3@1', 'pwm4@0', 'pwm7@0', 'saif0@0', 'saif0@1', 'saif1@0', 'spi2@0', 'spi3@0', 'spi3@1', 'usb0@0', 'usb0@1', 'usb0id1@0', 'usb0id@0', 'usb1@0', 'usb1@1' do not match any of the regexes: '^pinctrl-[0-9]+$', 'gpio@[0-9]+$' from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# arch/arm/boot/dts/nxp/mxs/imx28-cfa10058.dtb: pinctrl@80018000 (fsl,imx28-pinctrl): 'auart0-2pins@0', 'auart0@0', 'auart1-2pins@0', 'auart1@0', 'auart2-2pins@0', 'auart2-2pins@1', 'auart2-pins@0', 'auart3-2pins@0', 'auart3-2pins@1', 'auart3@0', 'auart4@0', 'auart4@1', 'can0@0', 'can1@0', 'duart-4pins@0', 'duart@0', 'duart@1', 'gpmi-nand@0', 'gpmi-status-cfg@0', 'i2c0@0', 'i2c0@1', 'i2c1@0', 'i2c1@1', 'lcdif-10058@0', 'lcdif-16bit@0', 'lcdif-18bit@0', 'lcdif-24bit@0', 'lcdif-sync@0', 'leds-10036@0', 'mac0@0', 'mac0@1', 'mac1@0', 'mmc0-4bit@0', 'mmc0-8bit@0', 'mmc0-cd-cfg@0', 'mmc0-sck-cfg@0', 'mmc1-4bit@0', 'mmc1-cd-cfg@0', 'mmc1-sck-cfg@0', 'mmc2-4bit@0', 'mmc2-4bit@1', 'mmc2-cd-cfg@0', 'mmc2-sck-cfg@0', 'mmc2-sck-cfg@1', 'mmc_pwr_cfa10036@0', 'otg-10036@0', 'pwm0@0', 'pwm2@0', 'pwm3@0', 'pwm3@1', 'pwm4@0', 'pwm7@0', 'saif0@0', 'saif0@1', 'saif1@0', 'spi2@0', 'spi3@0', 'spi3@1', 'ssd1306-10036@0', 'usb-10058@0', 'usb0@0', 'usb0@1', 'usb0id1@0', 'usb0id@0', 'usb1@0', 'usb1@1' do not match any of the regexes: '^pinctrl-[0-9]+$', 'gpio@[0-9]+$' from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# arch/arm/boot/dts/nxp/mxs/imx28-btt3-1.dtb: pinctrl@80018000 (fsl,imx28-pinctrl): 'auart0-2pins@0', 'auart0@0', 'auart1-2pins@0', 'auart1@0', 'auart2-2pins@0', 'auart2-2pins@1', 'auart2-pins@0', 'auart3-2pins@0', 'auart3-2pins@1', 'auart3@0', 'auart4@0', 'auart4@1', 'can0@0', 'can1@0', 'duart-4pins@0', 'duart@0', 'duart@1', 'gpmi-nand@0', 'gpmi-status-cfg@0', 'hog@0', 'hog@1', 'i2c0@0', 'i2c0@1', 'i2c1@0', 'i2c1@1', 'keypad-bttc@0', 'lcdif-16bit@0', 'lcdif-18bit@0', 'lcdif-24bit@0', 'lcdif-bttc@0', 'lcdif-bttc@1', 'lcdif-sync@0', 'mac0@0', 'mac0@1', 'mac1@0', 'mmc0-4bit@0', 'mmc0-8bit@0', 'mmc0-cd-cfg@0', 'mmc0-sck-cfg@0', 'mmc1-4bit@0', 'mmc1-cd-cfg@0', 'mmc1-sck-cfg@0', 'mmc2-4bit@0', 'mmc2-4bit@1', 'mmc2-cd-cfg@0', 'mmc2-sck-cfg@0', 'mmc2-sck-cfg@1', 'pwm0@0', 'pwm2@0', 'pwm3@0', 'pwm3@1', 'pwm4@0', 'pwm7@0', 'saif0@0', 'saif0@1', 'saif1@0', 'spi2@0', 'spi3@0', 'spi3@1', 'ssp1-sdio@0', 'usb0@0', 'usb0@1', 'usb0id1@0', 'usb0id@0', 'usb1@0', 'usb1@1', 'wifi-en-pin@0' do not match any of the regexes: '^pinctrl-[0-9]+$', 'gpio@[0-9]+$' from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# arch/arm/boot/dts/nxp/mxs/imx28-eukrea-mbmx283lc.dtb: pinctrl@80018000 (fsl,imx28-pinctrl): 'auart0-2pins@0', 'auart0@0', 'auart1-2pins@0', 'auart1@0', 'auart2-2pins@0', 'auart2-2pins@1', 'auart2-pins@0', 'auart3-2pins@0', 'auart3-2pins@1', 'auart3@0', 'auart4@0', 'auart4@1', 'can0@0', 'can1@0', 'duart-4pins@0', 'duart@0', 'duart@1', 'gpio-button-sw3-mbmx28lc@0', 'gpio-button-sw4-mbmx28lc@0', 'gpmi-nand@0', 'gpmi-status-cfg@0', 'hog-cpuimx283@0', 'i2c0@0', 'i2c0@1', 'i2c1@0', 'i2c1@1', 'lcd-3v3-mbmx28lc@0', 'lcdif-16bit@0', 'lcdif-18bit@0', 'lcdif-24bit@0', 'lcdif-mbmx28lc@0', 'lcdif-sync@0', 'led-d6-mbmx28lc@0', 'led-d7-mbmx28lc@0', 'mac0@0', 'mac0@1', 'mac1@0', 'mmc0-4bit@0', 'mmc0-8bit@0', 'mmc0-cd-cfg@0', 'mmc0-sck-cfg@0', 'mmc1-4bit@0', 'mmc1-cd-cfg@0', 'mmc1-sck-cfg@0', 'mmc2-4bit@0', 'mmc2-4bit@1', 'mmc2-cd-cfg@0', 'mmc2-sck-cfg@0', 'mmc2-sck-cfg@1', 'pwm0@0', 'pwm2@0', 'pwm3@0', 'pwm3@1', 'pwm4@0', 'pwm7@0', 'reg-usb0-vbus-mbmx28lc@0', 'reg-usb1-vbus-mbmx28lc@0', 'saif0@0', 'saif0@1', 'saif1@0', 'spi2@0', 'spi3@0', 'spi3@1', 'usb0@0', 'usb0@1', 'usb0id1@0', 'usb0id@0', 'usb1@0', 'usb1@1' do not match any of the regexes: '^pinctrl-[0-9]+$', 'gpio@[0-9]+$' from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# arch/arm/boot/dts/nxp/mxs/imx28-sps1.dtb: pinctrl@80018000 (fsl,imx28-pinctrl): 'auart0-2pins@0', 'auart0@0', 'auart1-2pins@0', 'auart1@0', 'auart2-2pins@0', 'auart2-2pins@1', 'auart2-pins@0', 'auart3-2pins@0', 'auart3-2pins@1', 'auart3@0', 'auart4@0', 'auart4@1', 'can0@0', 'can1@0', 'duart-4pins@0', 'duart@0', 'duart@1', 'gpmi-nand@0', 'gpmi-status-cfg@0', 'hog-gpios@0', 'i2c0@0', 'i2c0@1', 'i2c1@0', 'i2c1@1', 'lcdif-16bit@0', 'lcdif-18bit@0', 'lcdif-24bit@0', 'lcdif-sync@0', 'mac0@0', 'mac0@1', 'mac1@0', 'mmc0-4bit@0', 'mmc0-8bit@0', 'mmc0-cd-cfg@0', 'mmc0-sck-cfg@0', 'mmc1-4bit@0', 'mmc1-cd-cfg@0', 'mmc1-sck-cfg@0', 'mmc2-4bit@0', 'mmc2-4bit@1', 'mmc2-cd-cfg@0', 'mmc2-sck-cfg@0', 'mmc2-sck-cfg@1', 'pwm0@0', 'pwm2@0', 'pwm3@0', 'pwm3@1', 'pwm4@0', 'pwm7@0', 'saif0@0', 'saif0@1', 'saif1@0', 'spi2@0', 'spi3@0', 'spi3@1', 'usb0@0', 'usb0@1', 'usb0id1@0', 'usb0id@0', 'usb1@0', 'usb1@1' do not match any of the regexes: '^pinctrl-[0-9]+$', 'gpio@[0-9]+$' from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# arch/arm/boot/dts/nxp/mxs/imx28-apf28dev.dtb: pinctrl@80018000 (fsl,imx28-pinctrl): 'auart0-2pins@0', 'auart0@0', 'auart1-2pins@0', 'auart1@0', 'auart2-2pins@0', 'auart2-2pins@1', 'auart2-pins@0', 'auart3-2pins@0', 'auart3-2pins@1', 'auart3@0', 'auart4@0', 'auart4@1', 'can0@0', 'can1@0', 'duart-4pins@0', 'duart@0', 'duart@1', 'gpmi-nand@0', 'gpmi-status-cfg@0', 'hog@0', 'i2c0@0', 'i2c0@1', 'i2c1@0', 'i2c1@1', 'lcdif-16bit@0', 'lcdif-18bit@0', 'lcdif-24bit@0', 'lcdif-apf28dev@0', 'lcdif-sync@0', 'mac0@0', 'mac0@1', 'mac1@0', 'mmc0-4bit@0', 'mmc0-8bit@0', 'mmc0-cd-cfg@0', 'mmc0-sck-cfg@0', 'mmc1-4bit@0', 'mmc1-cd-cfg@0', 'mmc1-sck-cfg@0', 'mmc2-4bit@0', 'mmc2-4bit@1', 'mmc2-cd-cfg@0', 'mmc2-sck-cfg@0', 'mmc2-sck-cfg@1', 'otg-apf28dev@0', 'pwm0@0', 'pwm2@0', 'pwm3@0', 'pwm3@1', 'pwm4@0', 'pwm7@0', 'saif0@0', 'saif0@1', 'saif1@0', 'spi2@0', 'spi3@0', 'spi3@1', 'usb0@0', 'usb0@1', 'usb0id1@0', 'usb0id@0', 'usb1@0', 'usb1@1' do not match any of the regexes: '^pinctrl-[0-9]+$', 'gpio@[0-9]+$' from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# arch/arm/boot/dts/nxp/mxs/imx28-cfa10055.dtb: pinctrl@80018000 (fsl,imx28-pinctrl): 'auart0-2pins@0', 'auart0@0', 'auart1-2pins@0', 'auart1@0', 'auart2-2pins@0', 'auart2-2pins@1', 'auart2-pins@0', 'auart3-2pins@0', 'auart3-2pins@1', 'auart3@0', 'auart4@0', 'auart4@1', 'can0@0', 'can1@0', 'duart-4pins@0', 'duart@0', 'duart@1', 'gpmi-nand@0', 'gpmi-status-cfg@0', 'i2c0@0', 'i2c0@1', 'i2c1@0', 'i2c1@1', 'lcdif-10055-pullup@0', 'lcdif-16bit@0', 'lcdif-18bit@0', 'lcdif-24bit@0', 'lcdif-evk@0', 'lcdif-sync@0', 'leds-10036@0', 'mac0-10037@0', 'mac0@0', 'mac0@1', 'mac1@0', 'mmc0-4bit@0', 'mmc0-8bit@0', 'mmc0-cd-cfg@0', 'mmc0-sck-cfg@0', 'mmc1-4bit@0', 'mmc1-cd-cfg@0', 'mmc1-sck-cfg@0', 'mmc2-4bit@0', 'mmc2-4bit@1', 'mmc2-cd-cfg@0', 'mmc2-sck-cfg@0', 'mmc2-sck-cfg@1', 'mmc_pwr_cfa10036@0', 'otg-10036@0', 'pwm0@0', 'pwm2@0', 'pwm3@0', 'pwm3@1', 'pwm4@0', 'pwm7@0', 'saif0@0', 'saif0@1', 'saif1@0', 'spi2-cfa10055@0', 'spi2@0', 'spi3@0', 'spi3@1', 'ssd1306-10036@0', 'usb-10037@0', 'usb0@0', 'usb0@1', 'usb0id1@0', 'usb0id@0', 'usb1@0', 'usb1@1' do not match any of the regexes: '^pinctrl-[0-9]+$', 'gpio@[0-9]+$' from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# arch/arm/boot/dts/nxp/mxs/imx28-cfa10057.dtb: pinctrl@80018000 (fsl,imx28-pinctrl): 'auart0-2pins@0', 'auart0@0', 'auart1-2pins@0', 'auart1@0', 'auart2-2pins@0', 'auart2-2pins@1', 'auart2-pins@0', 'auart3-2pins@0', 'auart3-2pins@1', 'auart3@0', 'auart4@0', 'auart4@1', 'can0@0', 'can1@0', 'duart-4pins@0', 'duart@0', 'duart@1', 'gpmi-nand@0', 'gpmi-status-cfg@0', 'i2c0@0', 'i2c0@1', 'i2c1@0', 'i2c1@1', 'lcdif-16bit@0', 'lcdif-18bit@0', 'lcdif-24bit@0', 'lcdif-evk@0', 'lcdif-sync@0', 'leds-10036@0', 'mac0@0', 'mac0@1', 'mac1@0', 'mmc0-4bit@0', 'mmc0-8bit@0', 'mmc0-cd-cfg@0', 'mmc0-sck-cfg@0', 'mmc1-4bit@0', 'mmc1-cd-cfg@0', 'mmc1-sck-cfg@0', 'mmc2-4bit@0', 'mmc2-4bit@1', 'mmc2-cd-cfg@0', 'mmc2-sck-cfg@0', 'mmc2-sck-cfg@1', 'mmc_pwr_cfa10036@0', 'otg-10036@0', 'pwm0@0', 'pwm2@0', 'pwm3@0', 'pwm3@1', 'pwm4@0', 'pwm7@0', 'saif0@0', 'saif0@1', 'saif1@0', 'spi2@0', 'spi3@0', 'spi3@1', 'ssd1306-10036@0', 'usb-10057@0', 'usb0@0', 'usb0@1', 'usb0id1@0', 'usb0id@0', 'usb1@0', 'usb1@1' do not match any of the regexes: '^pinctrl-[0-9]+$', 'gpio@[0-9]+$' from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# arch/arm/boot/dts/nxp/mxs/imx28-btt3-2.dtb: pinctrl@80018000 (fsl,imx28-pinctrl): 'auart0-2pins@0', 'auart0@0', 'auart1-2pins@0', 'auart1@0', 'auart2-2pins@0', 'auart2-2pins@1', 'auart2-pins@0', 'auart3-2pins@0', 'auart3-2pins@1', 'auart3@0', 'auart4@0', 'auart4@1', 'can0@0', 'can1@0', 'duart-4pins@0', 'duart@0', 'duart@1', 'gpmi-nand@0', 'gpmi-status-cfg@0', 'hog@0', 'hog@1', 'i2c0@0', 'i2c0@1', 'i2c1@0', 'i2c1@1', 'keypad-bttc@0', 'lcdif-16bit@0', 'lcdif-18bit@0', 'lcdif-24bit@0', 'lcdif-bttc@0', 'lcdif-bttc@1', 'lcdif-sync@0', 'mac0@0', 'mac0@1', 'mac1@0', 'mmc0-4bit@0', 'mmc0-8bit@0', 'mmc0-cd-cfg@0', 'mmc0-sck-cfg@0', 'mmc1-4bit@0', 'mmc1-cd-cfg@0', 'mmc1-sck-cfg@0', 'mmc2-4bit@0', 'mmc2-4bit@1', 'mmc2-cd-cfg@0', 'mmc2-sck-cfg@0', 'mmc2-sck-cfg@1', 'pwm0@0', 'pwm2@0', 'pwm3@0', 'pwm3@1', 'pwm4@0', 'pwm7@0', 'saif0@0', 'saif0@1', 'saif1@0', 'spi2@0', 'spi3@0', 'spi3@1', 'ssp1-sdio@0', 'usb0@0', 'usb0@1', 'usb0id1@0', 'usb0id@0', 'usb1@0', 'usb1@1', 'wifi-en-pin@0' do not match any of the regexes: '^pinctrl-[0-9]+$', 'gpio@[0-9]+$' from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# arch/arm/boot/dts/nxp/mxs/imx28-evk.dtb: pinctrl@80018000 (fsl,imx28-pinctrl): 'auart0-2pins@0', 'auart0@0', 'auart1-2pins@0', 'auart1@0', 'auart2-2pins@0', 'auart2-2pins@1', 'auart2-pins@0', 'auart3-2pins@0', 'auart3-2pins@1', 'auart3@0', 'auart4@0', 'auart4@1', 'can0@0', 'can1@0', 'duart-4pins@0', 'duart@0', 'duart@1', 'gpmi-nand-evk@0', 'gpmi-nand@0', 'gpmi-status-cfg@0', 'hog@0', 'i2c0@0', 'i2c0@1', 'i2c1@0', 'i2c1@1', 'lcdif-16bit@0', 'lcdif-18bit@0', 'lcdif-24bit@0', 'lcdif-evk@0', 'lcdif-sync@0', 'led_gpio3_5@0', 'mac0@0', 'mac0@1', 'mac1@0', 'mmc0-4bit@0', 'mmc0-8bit@0', 'mmc0-cd-cfg@0', 'mmc0-sck-cfg@0', 'mmc1-4bit@0', 'mmc1-cd-cfg@0', 'mmc1-sck-cfg@0', 'mmc2-4bit@0', 'mmc2-4bit@1', 'mmc2-cd-cfg@0', 'mmc2-sck-cfg@0', 'mmc2-sck-cfg@1', 'pwm0@0', 'pwm2@0', 'pwm3@0', 'pwm3@1', 'pwm4@0', 'pwm7@0', 'saif0@0', 'saif0@1', 'saif1@0', 'spi2@0', 'spi3@0', 'spi3@1', 'usb0@0', 'usb0@1', 'usb0id1@0', 'usb0id@0', 'usb1@0', 'usb1@1' do not match any of the regexes: '^pinctrl-[0-9]+$', 'gpio@[0-9]+$' from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# arch/arm/boot/dts/nxp/mxs/imx28-duckbill-2.dtb: pinctrl@80018000 (fsl,imx28-pinctrl): 'auart0-2pins@0', 'auart0@0', 'auart1-2pins@0', 'auart1@0', 'auart2-2pins@0', 'auart2-2pins@1', 'auart2-pins@0', 'auart3-2pins@0', 'auart3-2pins@1', 'auart3@0', 'auart4@0', 'auart4@1', 'can0@0', 'can1@0', 'duart-4pins@0', 'duart@0', 'duart@1', 'gpmi-nand@0', 'gpmi-status-cfg@0', 'hog@0', 'i2c0@0', 'i2c0@1', 'i2c1@0', 'i2c1@1', 'lcdif-16bit@0', 'lcdif-18bit@0', 'lcdif-24bit@0', 'lcdif-sync@0', 'leds@0', 'mac0-phy-int@0', 'mac0-phy-reset@0', 'mac0@0', 'mac0@1', 'mac1@0', 'mmc0-4bit@0', 'mmc0-8bit@0', 'mmc0-cd-cfg@0', 'mmc0-sck-cfg@0', 'mmc1-4bit@0', 'mmc1-cd-cfg@0', 'mmc1-sck-cfg@0', 'mmc2-4bit@0', 'mmc2-4bit@1', 'mmc2-cd-cfg@0', 'mmc2-sck-cfg@0', 'mmc2-sck-cfg@1', 'pwm0@0', 'pwm2@0', 'pwm3@0', 'pwm3@1', 'pwm4@0', 'pwm7@0', 'saif0@0', 'saif0@1', 'saif1@0', 'spi2@0', 'spi3@0', 'spi3@1', 'usb0@0', 'usb0@1', 'usb0id1@0', 'usb0id@0', 'usb1@0', 'usb1@1' do not match any of the regexes: '^pinctrl-[0-9]+$', 'gpio@[0-9]+$' from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# arch/arm/boot/dts/nxp/mxs/imx28-cfa10049.dtb: pinctrl@80018000 (fsl,imx28-pinctrl): 'auart0-2pins@0', 'auart0@0', 'auart1-2pins@0', 'auart1@0', 'auart2-2pins@0', 'auart2-2pins@1', 'auart2-pins@0', 'auart3-2pins@0', 'auart3-2pins@1', 'auart3@0', 'auart4@0', 'auart4@1', 'can0@0', 'can1@0', 'duart-4pins@0', 'duart@0', 'duart@1', 'gpmi-nand@0', 'gpmi-status-cfg@0', 'i2c0@0', 'i2c0@1', 'i2c1@0', 'i2c1@1', 'i2cmux-10049@0', 'lcdif-10049-pullup@0', 'lcdif-16bit@0', 'lcdif-18bit@0', 'lcdif-24bit@0', 'lcdif-evk@0', 'lcdif-sync@0', 'leds-10036@0', 'mac0-10049@0', 'mac0@0', 'mac0@1', 'mac1@0', 'mmc0-4bit@0', 'mmc0-8bit@0', 'mmc0-cd-cfg@0', 'mmc0-sck-cfg@0', 'mmc1-4bit@0', 'mmc1-cd-cfg@0', 'mmc1-sck-cfg@0', 'mmc2-4bit@0', 'mmc2-4bit@1', 'mmc2-cd-cfg@0', 'mmc2-sck-cfg@0', 'mmc2-sck-cfg@1', 'mmc_pwr_cfa10036@0', 'otg-10036@0', 'pca-10049@0', 'pwm0@0', 'pwm2@0', 'pwm3@0', 'pwm3@1', 'pwm4@0', 'pwm7@0', 'rotary-10049@0', 'rotary-btn-10049@0', 'saif0@0', 'saif0@1', 'saif1@0', 'spi2-cfa10049@0', 'spi2@0', 'spi3-cfa10049@0', 'spi3@0', 'spi3@1', 'ssd1306-10036@0', 'usb-10049@0', 'usb0@0', 'usb0@1', 'usb0id1@0', 'usb0id@0', 'usb1@0', 'usb1@1' do not match any of the regexes: '^pinctrl-[0-9]+$', 'gpio@[0-9]+$' from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# arch/arm/boot/dts/nxp/mxs/imx28-ts4600.dtb: pinctrl@80018000 (fsl,imx28-pinctrl): 'auart0-2pins@0', 'auart0@0', 'auart1-2pins@0', 'auart1@0', 'auart2-2pins@0', 'auart2-2pins@1', 'auart2-pins@0', 'auart3-2pins@0', 'auart3-2pins@1', 'auart3@0', 'auart4@0', 'auart4@1', 'can0@0', 'can1@0', 'duart-4pins@0', 'duart@0', 'duart@1', 'en-sd-pwr@0', 'gpmi-nand@0', 'gpmi-status-cfg@0', 'i2c0@0', 'i2c0@1', 'i2c1@0', 'i2c1@1', 'lcdif-16bit@0', 'lcdif-18bit@0', 'lcdif-24bit@0', 'lcdif-sync@0', 'mac0@0', 'mac0@1', 'mac1@0', 'mmc0-4bit@0', 'mmc0-8bit@0', 'mmc0-cd-cfg@0', 'mmc0-sck-cfg@0', 'mmc1-4bit@0', 'mmc1-cd-cfg@0', 'mmc1-sck-cfg@0', 'mmc2-4bit@0', 'mmc2-4bit@1', 'mmc2-cd-cfg@0', 'mmc2-sck-cfg@0', 'mmc2-sck-cfg@1', 'pwm0@0', 'pwm2@0', 'pwm3@0', 'pwm3@1', 'pwm4@0', 'pwm7@0', 'saif0@0', 'saif0@1', 'saif1@0', 'spi2@0', 'spi3@0', 'spi3@1', 'usb0@0', 'usb0@1', 'usb0id1@0', 'usb0id@0', 'usb1@0', 'usb1@1' do not match any of the regexes: '^pinctrl-[0-9]+$', 'gpio@[0-9]+$' from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# arch/arm/boot/dts/nxp/mxs/imx28-m28cu3.dtb: pinctrl@80018000 (fsl,imx28-pinctrl): 'auart0-2pins@0', 'auart0@0', 'auart1-2pins@0', 'auart1@0', 'auart2-2pins@0', 'auart2-2pins@1', 'auart2-pins@0', 'auart3-2pins@0', 'auart3-2pins@1', 'auart3@0', 'auart4@0', 'auart4@1', 'can0@0', 'can1@0', 'duart-4pins@0', 'duart@0', 'duart@1', 'gpmi-nand@0', 'gpmi-status-cfg@0', 'hog@0', 'i2c0@0', 'i2c0@1', 'i2c1@0', 'i2c1@1', 'lcdif-16bit@0', 'lcdif-18bit@0', 'lcdif-24bit@0', 'lcdif-m28@0', 'lcdif-sync@0', 'leds-m28@0', 'mac0@0', 'mac0@1', 'mac1@0', 'mmc0-4bit@0', 'mmc0-8bit@0', 'mmc0-cd-cfg@0', 'mmc0-sck-cfg@0', 'mmc1-4bit@0', 'mmc1-cd-cfg@0', 'mmc1-sck-cfg@0', 'mmc2-4bit@0', 'mmc2-4bit@1', 'mmc2-cd-cfg@0', 'mmc2-sck-cfg@0', 'mmc2-sck-cfg@1', 'pwm0@0', 'pwm2@0', 'pwm3@0', 'pwm3@1', 'pwm4@0', 'pwm7@0', 'saif0@0', 'saif0@1', 'saif1@0', 'spi2@0', 'spi3@0', 'spi3@1', 'usb0@0', 'usb0@1', 'usb0id1@0', 'usb0id@0', 'usb1@0', 'usb1@1' do not match any of the regexes: '^pinctrl-[0-9]+$', 'gpio@[0-9]+$' from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# arch/arm/boot/dts/nxp/mxs/imx28-m28evk.dtb: pinctrl@80018000 (fsl,imx28-pinctrl): 'auart0-2pins@0', 'auart0@0', 'auart1-2pins@0', 'auart1@0', 'auart2-2pins@0', 'auart2-2pins@1', 'auart2-pins@0', 'auart3-2pins@0', 'auart3-2pins@1', 'auart3@0', 'auart4@0', 'auart4@1', 'can0@0', 'can1@0', 'duart-4pins@0', 'duart@0', 'duart@1', 'gpmi-nand@0', 'gpmi-status-cfg@0', 'hog@0', 'i2c0@0', 'i2c0@1', 'i2c1@0', 'i2c1@1', 'lcdif-16bit@0', 'lcdif-18bit@0', 'lcdif-24bit@0', 'lcdif-m28@0', 'lcdif-sync@0', 'mac0@0', 'mac0@1', 'mac1@0', 'mmc0-4bit@0', 'mmc0-8bit@0', 'mmc0-cd-cfg@0', 'mmc0-sck-cfg@0', 'mmc1-4bit@0', 'mmc1-cd-cfg@0', 'mmc1-sck-cfg@0', 'mmc2-4bit@0', 'mmc2-4bit@1', 'mmc2-cd-cfg@0', 'mmc2-sck-cfg@0', 'mmc2-sck-cfg@1', 'pwm0@0', 'pwm2@0', 'pwm3@0', 'pwm3@1', 'pwm4@0', 'pwm7@0', 'saif0@0', 'saif0@1', 'saif1@0', 'spi2@0', 'spi3@0', 'spi3@1', 'usb0@0', 'usb0@1', 'usb0id1@0', 'usb0id@0', 'usb1@0', 'usb1@1' do not match any of the regexes: '^pinctrl-[0-9]+$', 'gpio@[0-9]+$' from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# arch/arm/boot/dts/nxp/mxs/imx28-duckbill-2-485.dtb: pinctrl@80018000 (fsl,imx28-pinctrl): 'auart0-2pins@0', 'auart0@0', 'auart1-2pins@0', 'auart1@0', 'auart2-2pins@0', 'auart2-2pins@1', 'auart2-pins@0', 'auart3-2pins@0', 'auart3-2pins@1', 'auart3@0', 'auart4@0', 'auart4@1', 'can0@0', 'can1@0', 'duart-4pins@0', 'duart@0', 'duart@1', 'gpmi-nand@0', 'gpmi-status-cfg@0', 'hog@0', 'i2c0@0', 'i2c0@1', 'i2c1@0', 'i2c1@1', 'lcdif-16bit@0', 'lcdif-18bit@0', 'lcdif-24bit@0', 'lcdif-sync@0', 'leds@0', 'mac0-phy-int@0', 'mac0-phy-reset@0', 'mac0@0', 'mac0@1', 'mac1@0', 'mmc0-4bit@0', 'mmc0-8bit@0', 'mmc0-cd-cfg@0', 'mmc0-sck-cfg@0', 'mmc1-4bit@0', 'mmc1-cd-cfg@0', 'mmc1-sck-cfg@0', 'mmc2-4bit@0', 'mmc2-4bit@1', 'mmc2-cd-cfg@0', 'mmc2-sck-cfg@0', 'mmc2-sck-cfg@1', 'pwm0@0', 'pwm2@0', 'pwm3@0', 'pwm3@1', 'pwm4@0', 'pwm7@0', 'saif0@0', 'saif0@1', 'saif1@0', 'spi2@0', 'spi3@0', 'spi3@1', 'usb0@0', 'usb0@1', 'usb0id1@0', 'usb0id@0', 'usb1@0', 'usb1@1' do not match any of the regexes: '^pinctrl-[0-9]+$', 'gpio@[0-9]+$' from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# arch/arm/boot/dts/nxp/mxs/imx28-eukrea-mbmx287lc.dtb: pinctrl@80018000 (fsl,imx28-pinctrl): 'auart0-2pins@0', 'auart0@0', 'auart1-2pins@0', 'auart1@0', 'auart2-2pins@0', 'auart2-2pins@1', 'auart2-pins@0', 'auart3-2pins@0', 'auart3-2pins@1', 'auart3@0', 'auart4@0', 'auart4@1', 'can0@0', 'can1@0', 'duart-4pins@0', 'duart@0', 'duart@1', 'gpio-button-sw3-mbmx28lc@0', 'gpio-button-sw4-mbmx28lc@0', 'gpmi-nand@0', 'gpmi-status-cfg@0', 'hog-cpuimx283@0', 'hog-cpuimx287@0', 'i2c0@0', 'i2c0@1', 'i2c1@0', 'i2c1@1', 'lcd-3v3-mbmx28lc@0', 'lcdif-16bit@0', 'lcdif-18bit@0', 'lcdif-24bit@0', 'lcdif-mbmx28lc@0', 'lcdif-sync@0', 'led-d6-mbmx28lc@0', 'led-d7-mbmx28lc@0', 'mac0@0', 'mac0@1', 'mac1@0', 'mmc0-4bit@0', 'mmc0-8bit@0', 'mmc0-cd-cfg@0', 'mmc0-sck-cfg@0', 'mmc1-4bit@0', 'mmc1-cd-cfg@0', 'mmc1-sck-cfg@0', 'mmc2-4bit@0', 'mmc2-4bit@1', 'mmc2-cd-cfg@0', 'mmc2-sck-cfg@0', 'mmc2-sck-cfg@1', 'pwm0@0', 'pwm2@0', 'pwm3@0', 'pwm3@1', 'pwm4@0', 'pwm7@0', 'reg-usb0-vbus-mbmx28lc@0', 'reg-usb1-vbus-mbmx28lc@0', 'saif0@0', 'saif0@1', 'saif1@0', 'spi2@0', 'spi3@0', 'spi3@1', 'usb0@0', 'usb0@1', 'usb0id1@0', 'usb0id@0', 'usb1@0', 'usb1@1' do not match any of the regexes: '^pinctrl-[0-9]+$', 'gpio@[0-9]+$' from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# arch/arm/boot/dts/nxp/lpc/lpc3250-phy3250.dtb: /ahb/flash@20020000: failed to match any schema with compatible: ['nxp,lpc3220-slc'] ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 0/3] Support i.MX28 Amarula rmm board 2025-05-21 12:56 ` [PATCH 0/3] Support " Rob Herring (Arm) @ 2025-05-28 8:40 ` Dario Binacchi 0 siblings, 0 replies; 12+ messages in thread From: Dario Binacchi @ 2025-05-28 8:40 UTC (permalink / raw) To: Rob Herring (Arm) Cc: Michael Walle, devicetree, linux-arm-kernel, Marek Vasut, Max Merchel, Sascha Hauer, Krzysztof Kozlowski, Frieder Schrempf, Fabio Estevam, Peng Fan, Shawn Guo, Conor Dooley, Francesco Dolcini, Tim Harvey, Alexander Stein, Fabio Estevam, Heiko Schocher, Pengutronix Kernel Team, imx, linux-amarula, linux-kernel, michael, Frank Li Hello Rob, On Wed, May 21, 2025 at 2:56 PM Rob Herring (Arm) <robh@kernel.org> wrote: > > > On Wed, 21 May 2025 11:28:19 +0200, Dario Binacchi wrote: > > The series adds support for i.MX28 Amarula rmm board. > > > > The board includes the following resources: > > - 256 Mbytes NAND Flash > > - 256 Mbytes SRAM > > - LCD-TFT controller > > - CAN > > - USB 2.0 high-speed/full-speed > > - Ethernet MAC > > > > > > Dario Binacchi (3): > > ARM: dts: imx28: add pwm7 muxing options > > dt-bindings: arm: fsl: add i.MX28 Amarula rmm board > > ARM: dts: mxs: support i.MX28 Amarula rmm board > > > > .../devicetree/bindings/arm/fsl.yaml | 1 + > > arch/arm/boot/dts/nxp/mxs/Makefile | 1 + > > .../boot/dts/nxp/mxs/imx28-amarula-rmm.dts | 302 ++++++++++++++++++ > > arch/arm/boot/dts/nxp/mxs/imx28.dtsi | 10 + > > 4 files changed, 314 insertions(+) > > create mode 100644 arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dts > > > > -- > > 2.43.0 > > > > base-commit: 4a95bc121ccdaee04c4d72f84dbfa6b880a514b6 > > branch: imx28-amarula-rmm > > > > > > > My bot found new DTB warnings on the .dts files added or changed in this > series. > > Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings > are fixed by another series. There are some errors/warnings that need to be fixed in the board's DTS, but most of them originate from imx28.dtsi and the lack of data bindings. By applying the following patches to my series: https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250522194732.493624-1-Frank.Li@nxp.com/ https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250522205710.502779-1-Frank.Li@nxp.com/ https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250522223742.516254-1-Frank.Li@nxp.com/ https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250523191928.563368-1-Frank.Li@nxp.com/ https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250523192016.563540-1-Frank.Li@nxp.com/ https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250523192055.563711-1-Frank.Li@nxp.com/ https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250523203159.570982-1-Frank.Li@nxp.com/ https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250523213252.582366-1-Frank.Li@nxp.com/ https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250523204524.573028-1-Frank.Li@nxp.com/ and by adding a new patch for the mxs-lradc.yaml binding to the series, I managed to reach the following situation, where almost all warnings/errors have been fixed, but one still remains: make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- CHECK_DTBS=y dtbs arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dts DTC [C] arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dtb /home/dario/projects/linux/arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dtb: spi@80010000: $nodename:0: 'spi@80010000' does not match '^mmc(@.*)?$' from schema $id: http://devicetree.org/schemas/mmc/mxs-mmc.yaml# /home/dario/projects/linux/arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dtb: spi@80010000: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'broken-cd', 'bus-width', 'clocks' were unexpected) from schema $id: http://devicetree.org/schemas/mmc/mxs-mmc.yaml# make[1]: Nothing to be done for 'arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dts'. I don’t know how to fix this, and the issue also appears when compiling other boards. I’ll send out version 2 with the changes to imx28-amarula-rmm.board. Thanks and regards, Dario > Ultimately, it is up to the platform > maintainer whether these warnings are acceptable or not. No need to reply > unless the platform maintainer has comments. > > If you already ran DT checks and didn't see these error(s), then > make sure dt-schema is up to date: > > pip3 install dtschema --upgrade > > > This patch series was applied (using b4) to base: > Base: using specified base-commit 4a95bc121ccdaee04c4d72f84dbfa6b880a514b6 > > If this is not the correct base, please add 'base-commit' tag > (or use b4 which does this automatically) > > New warnings running 'make CHECK_DTBS=y for arch/arm/boot/dts/nxp/' for 20250521092826.1035448-1-dario.binacchi@amarulasolutions.com: > > arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dtb: /apb@80000000/apbh-bus@80000000/interrupt-controller@80000000: failed to match any schema with compatible: ['fsl,imx28-icoll', 'fsl,icoll'] > arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dtb: /apb@80000000/apbh-bus@80000000/interrupt-controller@80000000: failed to match any schema with compatible: ['fsl,imx28-icoll', 'fsl,icoll'] > arch/arm/boot/dts/nxp/mxs/imx28-xea.dtb: spi@80010000 (fsl,imx28-mmc): $nodename:0: 'spi@80010000' does not match '^mmc(@.*)?$' > from schema $id: http://devicetree.org/schemas/mmc/mxs-mmc.yaml# > arch/arm/boot/dts/nxp/mxs/imx28-duckbill-2-spi.dtb: pinctrl@80018000 (fsl,imx28-pinctrl): 'auart0-2pins@0', 'auart0@0', 'auart1-2pins@0', 'auart1@0', 'auart2-2pins@0', 'auart2-2pins@1', 'auart2-pins@0', 'auart3-2pins@0', 'auart3-2pins@1', 'auart3@0', 'auart4@0', 'auart4@1', 'can0@0', 'can1@0', 'duart-4pins@0', 'duart@0', 'duart@1', 'gpmi-nand@0', 'gpmi-status-cfg@0', 'hog@0', 'i2c0@0', 'i2c0@1', 'i2c1@0', 'i2c1@1', 'lcdif-16bit@0', 'lcdif-18bit@0', 'lcdif-24bit@0', 'lcdif-sync@0', 'leds@0', 'mac0-phy-int@0', 'mac0-phy-reset@0', 'mac0@0', 'mac0@1', 'mac1@0', 'mmc0-4bit@0', 'mmc0-8bit@0', 'mmc0-cd-cfg@0', 'mmc0-sck-cfg@0', 'mmc1-4bit@0', 'mmc1-cd-cfg@0', 'mmc1-sck-cfg@0', 'mmc2-4bit@0', 'mmc2-4bit@1', 'mmc2-cd-cfg@0', 'mmc2-sck-cfg@0', 'mmc2-sck-cfg@1', 'pwm0@0', 'pwm2@0', 'pwm3@0', 'pwm3@1', 'pwm4@0', 'pwm7@0', 'qca7000@0', 'saif0@0', 'saif0@1', 'saif1@0', 'spi2@0', 'spi3@0', 'spi3@1', 'usb0@0', 'usb0@1', 'usb0id1@0', 'usb0id@0', 'usb1@0', 'usb1@1' do not match any of the regexes: '^p > inctrl-[0-9]+$', 'gpio@[0-9]+$' > from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# > arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dtb: nand-controller@8000c000 (fsl,imx28-gpmi-nand): #size-cells: 0 was expected > from schema $id: http://devicetree.org/schemas/mtd/gpmi-nand.yaml# > arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dtb: nand-controller@8000c000 (fsl,imx28-gpmi-nand): Unevaluated properties are not allowed ('#address-cells', '#size-cells' were unexpected) > from schema $id: http://devicetree.org/schemas/mtd/gpmi-nand.yaml# > arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dtb: nand-controller@8000c000 (fsl,imx28-gpmi-nand): #size-cells: 0 was expected > from schema $id: http://devicetree.org/schemas/mtd/nand-controller.yaml# > arch/arm/boot/dts/nxp/mxs/imx28-cfa10056.dtb: pinctrl@80018000 (fsl,imx28-pinctrl): 'auart0-2pins@0', 'auart0@0', 'auart1-2pins@0', 'auart1@0', 'auart2-2pins@0', 'auart2-2pins@1', 'auart2-pins@0', 'auart3-2pins@0', 'auart3-2pins@1', 'auart3@0', 'auart4@0', 'auart4@1', 'can0@0', 'can1@0', 'duart-4pins@0', 'duart@0', 'duart@1', 'gpmi-nand@0', 'gpmi-status-cfg@0', 'i2c0@0', 'i2c0@1', 'i2c1@0', 'i2c1@1', 'lcdif-10056-pullup@0', 'lcdif-10056@0', 'lcdif-16bit@0', 'lcdif-18bit@0', 'lcdif-24bit@0', 'lcdif-sync@0', 'leds-10036@0', 'mac0-10037@0', 'mac0@0', 'mac0@1', 'mac1@0', 'mmc0-4bit@0', 'mmc0-8bit@0', 'mmc0-cd-cfg@0', 'mmc0-sck-cfg@0', 'mmc1-4bit@0', 'mmc1-cd-cfg@0', 'mmc1-sck-cfg@0', 'mmc2-4bit@0', 'mmc2-4bit@1', 'mmc2-cd-cfg@0', 'mmc2-sck-cfg@0', 'mmc2-sck-cfg@1', 'mmc_pwr_cfa10036@0', 'otg-10036@0', 'pwm0@0', 'pwm2@0', 'pwm3@0', 'pwm3@1', 'pwm4@0', 'pwm7@0', 'saif0@0', 'saif0@1', 'saif1@0', 'spi2-cfa10056@0', 'spi2@0', 'spi3@0', 'spi3@1', 'ssd1306-10036@0', 'usb-10037@0', 'usb0@0', 'us > b0@1', 'usb0id1@0', 'usb0id@0', 'usb1@0', 'usb1@1' do not match any of the regexes: '^pinctrl-[0-9]+$', 'gpio@[0-9]+$' > from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# > arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dtb: spi@80010000 (fsl,imx28-mmc): $nodename:0: 'spi@80010000' does not match '^mmc(@.*)?$' > from schema $id: http://devicetree.org/schemas/mmc/mxs-mmc.yaml# > arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dtb: spi@80010000 (fsl,imx28-mmc): Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'broken-cd', 'bus-width', 'clocks' were unexpected) > from schema $id: http://devicetree.org/schemas/mmc/mxs-mmc.yaml# > arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dtb: pinctrl@80018000 (fsl,imx28-pinctrl): 'auart0-2pins@0', 'auart0@0', 'auart1-2pins@0', 'auart1@0', 'auart2-2pins@0', 'auart2-2pins@1', 'auart2-pins@0', 'auart3-2pins@0', 'auart3-2pins@1', 'auart3@0', 'auart4@0', 'auart4@1', 'can0@0', 'can1@0', 'duart-4pins@0', 'duart@0', 'duart@1', 'edt-ft5x06-0', 'edt-ft5x06-wake-0', 'fec-3v3-enable-0', 'gpmi-nand@0', 'gpmi-status-cfg@0', 'hog-0', 'i2c0@0', 'i2c0@1', 'i2c1@0', 'i2c1@1', 'lcdif-16bit@0', 'lcdif-18bit@0', 'lcdif-24bit@0', 'lcdif-sync@0', 'leds-0', 'mac0@0', 'mac0@1', 'mac1@0', 'mmc0-4bit@0', 'mmc0-8bit@0', 'mmc0-cd-cfg@0', 'mmc0-sck-cfg@0', 'mmc1-4bit@0', 'mmc1-cd-cfg@0', 'mmc1-sck-cfg@0', 'mmc2-4bit@0', 'mmc2-4bit@1', 'mmc2-cd-cfg@0', 'mmc2-sck-cfg@0', 'mmc2-sck-cfg@1', 'pwm0@0', 'pwm2@0', 'pwm3@0', 'pwm3@1', 'pwm4@0', 'pwm7@0', 'saif0@0', 'saif0@1', 'saif1@0', 'spi2@0', 'spi3@0', 'spi3@1', 'usb0-vbus-enable-0', 'usb0@0', 'usb0@1', 'usb0id1@0', 'usb0id@0', 'usb1-vbus-enable-0', 'usb1@0' > , 'usb1@1' do not match any of the regexes: '^pinctrl-[0-9]+$', 'gpio@[0-9]+$' > from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# > arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dtb: pinctrl@80018000 (fsl,imx28-pinctrl): compatible: ['fsl,imx28-pinctrl', 'simple-bus'] is too long > from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# > arch/arm/boot/dts/nxp/mxs/imx28-xea.dtb: pinctrl@80018000 (fsl,imx28-pinctrl): 'auart0-2pins@0', 'auart0@0', 'auart1-2pins@0', 'auart1@0', 'auart2-2pins@0', 'auart2-2pins@1', 'auart2-pins@0', 'auart3-2pins@0', 'auart3-2pins@1', 'auart3@0', 'auart4@0', 'auart4@1', 'can0@0', 'can1@0', 'duart-4pins@0', 'duart@0', 'duart@1', 'gpmi-nand@0', 'gpmi-status-cfg@0', 'hog@0', 'hog@1', 'hog@2', 'i2c0@0', 'i2c0@1', 'i2c1@0', 'i2c1@1', 'lcdif-16bit@0', 'lcdif-18bit@0', 'lcdif-24bit@0', 'lcdif-sync@0', 'mac0@0', 'mac0@1', 'mac1@0', 'mmc0-4bit@0', 'mmc0-8bit@0', 'mmc0-cd-cfg@0', 'mmc0-sck-cfg@0', 'mmc1-4bit@0', 'mmc1-cd-cfg@0', 'mmc1-sck-cfg@0', 'mmc2-4bit@0', 'mmc2-4bit@1', 'mmc2-cd-cfg@0', 'mmc2-sck-cfg@0', 'mmc2-sck-cfg@1', 'pwm0@0', 'pwm2@0', 'pwm3@0', 'pwm3@1', 'pwm4@0', 'pwm7@0', 'saif0@0', 'saif0@1', 'saif1@0', 'spi2@0', 'spi3@0', 'spi3@1', 'usb0@0', 'usb0@1', 'usb0id1@0', 'usb0id@0', 'usb1@0', 'usb1@1' do not match any of the regexes: '^pinctrl-[0-9]+$', 'gpio@[0-9]+$' > from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# > arch/arm/boot/dts/nxp/mxs/imx28-cfa10037.dtb: pinctrl@80018000 (fsl,imx28-pinctrl): 'auart0-2pins@0', 'auart0@0', 'auart1-2pins@0', 'auart1@0', 'auart2-2pins@0', 'auart2-2pins@1', 'auart2-pins@0', 'auart3-2pins@0', 'auart3-2pins@1', 'auart3@0', 'auart4@0', 'auart4@1', 'can0@0', 'can1@0', 'duart-4pins@0', 'duart@0', 'duart@1', 'gpmi-nand@0', 'gpmi-status-cfg@0', 'i2c0@0', 'i2c0@1', 'i2c1@0', 'i2c1@1', 'lcdif-16bit@0', 'lcdif-18bit@0', 'lcdif-24bit@0', 'lcdif-sync@0', 'leds-10036@0', 'mac0-10037@0', 'mac0@0', 'mac0@1', 'mac1@0', 'mmc0-4bit@0', 'mmc0-8bit@0', 'mmc0-cd-cfg@0', 'mmc0-sck-cfg@0', 'mmc1-4bit@0', 'mmc1-cd-cfg@0', 'mmc1-sck-cfg@0', 'mmc2-4bit@0', 'mmc2-4bit@1', 'mmc2-cd-cfg@0', 'mmc2-sck-cfg@0', 'mmc2-sck-cfg@1', 'mmc_pwr_cfa10036@0', 'otg-10036@0', 'pwm0@0', 'pwm2@0', 'pwm3@0', 'pwm3@1', 'pwm4@0', 'pwm7@0', 'saif0@0', 'saif0@1', 'saif1@0', 'spi2@0', 'spi3@0', 'spi3@1', 'ssd1306-10036@0', 'usb-10037@0', 'usb0@0', 'usb0@1', 'usb0id1@0', 'usb0id@0', 'usb1@0', 'usb1@1' do not ma > tch any of the regexes: '^pinctrl-[0-9]+$', 'gpio@[0-9]+$' > from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# > arch/arm/boot/dts/nxp/mxs/imx28-apx4devkit.dtb: pinctrl@80018000 (fsl,imx28-pinctrl): 'auart0-2pins@0', 'auart0@0', 'auart1-2pins@0', 'auart1@0', 'auart2-2pins@0', 'auart2-2pins@1', 'auart2-pins@0', 'auart3-2pins@0', 'auart3-2pins@1', 'auart3@0', 'auart4@0', 'auart4@1', 'can0@0', 'can1@0', 'duart-4pins@0', 'duart@0', 'duart@1', 'gpmi-nand@0', 'gpmi-status-cfg@0', 'hog@0', 'i2c0@0', 'i2c0@1', 'i2c1@0', 'i2c1@1', 'lcdif-16bit@0', 'lcdif-18bit@0', 'lcdif-24bit@0', 'lcdif-apx4@0', 'lcdif-sync@0', 'mac0@0', 'mac0@1', 'mac1@0', 'mmc0-4bit@0', 'mmc0-8bit@0', 'mmc0-cd-cfg@0', 'mmc0-sck-cfg@0', 'mmc1-4bit@0', 'mmc1-cd-cfg@0', 'mmc1-sck-cfg@0', 'mmc2-4bit-apx4@0', 'mmc2-4bit@0', 'mmc2-4bit@1', 'mmc2-cd-cfg@0', 'mmc2-sck-cfg-apx4@0', 'mmc2-sck-cfg@0', 'mmc2-sck-cfg@1', 'pwm0@0', 'pwm2@0', 'pwm3@0', 'pwm3@1', 'pwm4@0', 'pwm7@0', 'saif0@0', 'saif0@1', 'saif1@0', 'spi2@0', 'spi3@0', 'spi3@1', 'usb0@0', 'usb0@1', 'usb0id1@0', 'usb0id@0', 'usb1@0', 'usb1@1' do not match any of the regexes: '^pinctrl > -[0-9]+$', 'gpio@[0-9]+$' > from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# > arch/arm/boot/dts/nxp/mxs/imx28-btt3-0.dtb: pinctrl@80018000 (fsl,imx28-pinctrl): 'auart0-2pins@0', 'auart0@0', 'auart1-2pins@0', 'auart1@0', 'auart2-2pins@0', 'auart2-2pins@1', 'auart2-pins@0', 'auart3-2pins@0', 'auart3-2pins@1', 'auart3@0', 'auart4@0', 'auart4@1', 'can0@0', 'can1@0', 'duart-4pins@0', 'duart@0', 'duart@1', 'gpmi-nand@0', 'gpmi-status-cfg@0', 'hog@0', 'hog@1', 'i2c0@0', 'i2c0@1', 'i2c1@0', 'i2c1@1', 'keypad-bttc@0', 'lcdif-16bit@0', 'lcdif-18bit@0', 'lcdif-24bit@0', 'lcdif-bttc@0', 'lcdif-bttc@1', 'lcdif-sync@0', 'mac0@0', 'mac0@1', 'mac1@0', 'mmc0-4bit@0', 'mmc0-8bit@0', 'mmc0-cd-cfg@0', 'mmc0-sck-cfg@0', 'mmc1-4bit@0', 'mmc1-cd-cfg@0', 'mmc1-sck-cfg@0', 'mmc2-4bit@0', 'mmc2-4bit@1', 'mmc2-cd-cfg@0', 'mmc2-sck-cfg@0', 'mmc2-sck-cfg@1', 'pwm0@0', 'pwm2@0', 'pwm3@0', 'pwm3@1', 'pwm4@0', 'pwm7@0', 'saif0@0', 'saif0@1', 'saif1@0', 'spi2@0', 'spi3@0', 'spi3@1', 'ssp1-sdio@0', 'usb0@0', 'usb0@1', 'usb0id1@0', 'usb0id@0', 'usb1@0', 'usb1@1', 'wifi-en-pin@0' do not match an > y of the regexes: '^pinctrl-[0-9]+$', 'gpio@[0-9]+$' > from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# > arch/arm/boot/dts/nxp/mxs/imx28-tx28.dtb: pinctrl@80018000 (fsl,imx28-pinctrl): 'auart0-2pins@0', 'auart0@0', 'auart1-2pins@0', 'auart1@0', 'auart2-2pins@0', 'auart2-2pins@1', 'auart2-pins@0', 'auart3-2pins@0', 'auart3-2pins@1', 'auart3@0', 'auart4@0', 'auart4@1', 'can0@0', 'can1@0', 'duart-4pins@0', 'duart@0', 'duart@1', 'gpmi-nand@0', 'gpmi-status-cfg@0', 'hog@0', 'i2c0@0', 'i2c0@1', 'i2c1@0', 'i2c1@1', 'lcdif-16bit@0', 'lcdif-18bit@0', 'lcdif-24bit@0', 'lcdif-sync@0', 'mac0@0', 'mac0@1', 'mac1@0', 'mmc0-4bit@0', 'mmc0-8bit@0', 'mmc0-cd-cfg@0', 'mmc0-sck-cfg@0', 'mmc1-4bit@0', 'mmc1-cd-cfg@0', 'mmc1-sck-cfg@0', 'mmc2-4bit@0', 'mmc2-4bit@1', 'mmc2-cd-cfg@0', 'mmc2-sck-cfg@0', 'mmc2-sck-cfg@1', 'pwm0@0', 'pwm2@0', 'pwm3@0', 'pwm3@1', 'pwm4@0', 'pwm7@0', 'saif0@0', 'saif0@1', 'saif1@0', 'spi-gpiogrp@0', 'spi2@0', 'spi3@0', 'spi3@1', 'tx28-edt-ft5x06-pins@0', 'tx28-flexcan-xcvr-pins@0', 'tx28-lcdif-23bit@0', 'tx28-lcdif-ctrl@0', 'tx28-mac0-gpio-pins@0', 'tx28-pca9554-pins@0', 'tx28-tsc > 2007-pins@0', 'tx28-usbphy0-pins@0', 'tx28-usbphy1-pins@0', 'usb0@0', 'usb0@1', 'usb0id1@0', 'usb0id@0', 'usb1@0', 'usb1@1' do not match any of the regexes: '^pinctrl-[0-9]+$', 'gpio@[0-9]+$' > from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# > arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dtb: /apb@80000000/apbh-bus@80000000/digctl@8001c000: failed to match any schema with compatible: ['fsl,imx28-digctl', 'fsl,imx23-digctl'] > arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dtb: /apb@80000000/apbh-bus@80000000/digctl@8001c000: failed to match any schema with compatible: ['fsl,imx28-digctl', 'fsl,imx23-digctl'] > arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dtb: /apb@80000000/apbx-bus@80040000/lradc@80050000: failed to match any schema with compatible: ['fsl,imx28-lradc'] > arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dtb: /apb@80000000/apbx-bus@80040000/i2c@80058000/edt-ft5x06@38: failed to match any schema with compatible: ['edt,edt-ft5x06'] > arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dtb: /apb@80000000/apbx-bus@80040000/timrot@80068000: failed to match any schema with compatible: ['fsl,imx28-timrot', 'fsl,timrot'] > arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dtb: /apb@80000000/apbx-bus@80040000/timrot@80068000: failed to match any schema with compatible: ['fsl,imx28-timrot', 'fsl,timrot'] > arch/arm/boot/dts/nxp/mxs/imx28-duckbill-2-enocean.dtb: pinctrl@80018000 (fsl,imx28-pinctrl): 'auart0-2pins@0', 'auart0@0', 'auart1-2pins@0', 'auart1@0', 'auart2-2pins@0', 'auart2-2pins@1', 'auart2-pins@0', 'auart3-2pins@0', 'auart3-2pins@1', 'auart3@0', 'auart4@0', 'auart4@1', 'can0@0', 'can1@0', 'duart-4pins@0', 'duart@0', 'duart@1', 'enocean-button@0', 'gpmi-nand@0', 'gpmi-status-cfg@0', 'hog@0', 'i2c0@0', 'i2c0@1', 'i2c1@0', 'i2c1@1', 'lcdif-16bit@0', 'lcdif-18bit@0', 'lcdif-24bit@0', 'lcdif-sync@0', 'leds@0', 'mac0-phy-int@0', 'mac0-phy-reset@0', 'mac0@0', 'mac0@1', 'mac1@0', 'mmc0-4bit@0', 'mmc0-8bit@0', 'mmc0-cd-cfg@0', 'mmc0-sck-cfg@0', 'mmc1-4bit@0', 'mmc1-cd-cfg@0', 'mmc1-sck-cfg@0', 'mmc2-4bit@0', 'mmc2-4bit@1', 'mmc2-cd-cfg@0', 'mmc2-sck-cfg@0', 'mmc2-sck-cfg@1', 'pwm0@0', 'pwm2@0', 'pwm3@0', 'pwm3@1', 'pwm4@0', 'pwm7@0', 'saif0@0', 'saif0@1', 'saif1@0', 'spi2@0', 'spi3@0', 'spi3@1', 'usb0@0', 'usb0@1', 'usb0id1@0', 'usb0id@0', 'usb1@0', 'usb1@1' do not match any of the r > egexes: '^pinctrl-[0-9]+$', 'gpio@[0-9]+$' > from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# > arch/arm/boot/dts/nxp/mxs/imx28-cfa10036.dtb: pinctrl@80018000 (fsl,imx28-pinctrl): 'auart0-2pins@0', 'auart0@0', 'auart1-2pins@0', 'auart1@0', 'auart2-2pins@0', 'auart2-2pins@1', 'auart2-pins@0', 'auart3-2pins@0', 'auart3-2pins@1', 'auart3@0', 'auart4@0', 'auart4@1', 'can0@0', 'can1@0', 'duart-4pins@0', 'duart@0', 'duart@1', 'gpmi-nand@0', 'gpmi-status-cfg@0', 'i2c0@0', 'i2c0@1', 'i2c1@0', 'i2c1@1', 'lcdif-16bit@0', 'lcdif-18bit@0', 'lcdif-24bit@0', 'lcdif-sync@0', 'leds-10036@0', 'mac0@0', 'mac0@1', 'mac1@0', 'mmc0-4bit@0', 'mmc0-8bit@0', 'mmc0-cd-cfg@0', 'mmc0-sck-cfg@0', 'mmc1-4bit@0', 'mmc1-cd-cfg@0', 'mmc1-sck-cfg@0', 'mmc2-4bit@0', 'mmc2-4bit@1', 'mmc2-cd-cfg@0', 'mmc2-sck-cfg@0', 'mmc2-sck-cfg@1', 'mmc_pwr_cfa10036@0', 'otg-10036@0', 'pwm0@0', 'pwm2@0', 'pwm3@0', 'pwm3@1', 'pwm4@0', 'pwm7@0', 'saif0@0', 'saif0@1', 'saif1@0', 'spi2@0', 'spi3@0', 'spi3@1', 'ssd1306-10036@0', 'usb0@0', 'usb0@1', 'usb0id1@0', 'usb0id@0', 'usb1@0', 'usb1@1' do not match any of the regexes: '^pinct > rl-[0-9]+$', 'gpio@[0-9]+$' > from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# > arch/arm/boot/dts/nxp/mxs/imx28-apf28.dtb: pinctrl@80018000 (fsl,imx28-pinctrl): 'auart0-2pins@0', 'auart0@0', 'auart1-2pins@0', 'auart1@0', 'auart2-2pins@0', 'auart2-2pins@1', 'auart2-pins@0', 'auart3-2pins@0', 'auart3-2pins@1', 'auart3@0', 'auart4@0', 'auart4@1', 'can0@0', 'can1@0', 'duart-4pins@0', 'duart@0', 'duart@1', 'gpmi-nand@0', 'gpmi-status-cfg@0', 'i2c0@0', 'i2c0@1', 'i2c1@0', 'i2c1@1', 'lcdif-16bit@0', 'lcdif-18bit@0', 'lcdif-24bit@0', 'lcdif-sync@0', 'mac0@0', 'mac0@1', 'mac1@0', 'mmc0-4bit@0', 'mmc0-8bit@0', 'mmc0-cd-cfg@0', 'mmc0-sck-cfg@0', 'mmc1-4bit@0', 'mmc1-cd-cfg@0', 'mmc1-sck-cfg@0', 'mmc2-4bit@0', 'mmc2-4bit@1', 'mmc2-cd-cfg@0', 'mmc2-sck-cfg@0', 'mmc2-sck-cfg@1', 'pwm0@0', 'pwm2@0', 'pwm3@0', 'pwm3@1', 'pwm4@0', 'pwm7@0', 'saif0@0', 'saif0@1', 'saif1@0', 'spi2@0', 'spi3@0', 'spi3@1', 'usb0@0', 'usb0@1', 'usb0id1@0', 'usb0id@0', 'usb1@0', 'usb1@1' do not match any of the regexes: '^pinctrl-[0-9]+$', 'gpio@[0-9]+$' > from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# > arch/arm/boot/dts/nxp/mxs/imx28-duckbill.dtb: pinctrl@80018000 (fsl,imx28-pinctrl): 'auart0-2pins@0', 'auart0@0', 'auart1-2pins@0', 'auart1@0', 'auart2-2pins@0', 'auart2-2pins@1', 'auart2-pins@0', 'auart3-2pins@0', 'auart3-2pins@1', 'auart3@0', 'auart4@0', 'auart4@1', 'can0@0', 'can1@0', 'duart-4pins@0', 'duart@0', 'duart@1', 'gpmi-nand@0', 'gpmi-status-cfg@0', 'hog@0', 'i2c0@0', 'i2c0@1', 'i2c1@0', 'i2c1@1', 'lcdif-16bit@0', 'lcdif-18bit@0', 'lcdif-24bit@0', 'lcdif-sync@0', 'leds@0', 'mac0-phy-reset@0', 'mac0@0', 'mac0@1', 'mac1@0', 'mmc0-4bit@0', 'mmc0-8bit@0', 'mmc0-cd-cfg@0', 'mmc0-sck-cfg@0', 'mmc1-4bit@0', 'mmc1-cd-cfg@0', 'mmc1-sck-cfg@0', 'mmc2-4bit@0', 'mmc2-4bit@1', 'mmc2-cd-cfg@0', 'mmc2-sck-cfg@0', 'mmc2-sck-cfg@1', 'pwm0@0', 'pwm2@0', 'pwm3@0', 'pwm3@1', 'pwm4@0', 'pwm7@0', 'saif0@0', 'saif0@1', 'saif1@0', 'spi2@0', 'spi3@0', 'spi3@1', 'usb0@0', 'usb0@1', 'usb0id1@0', 'usb0id@0', 'usb1@0', 'usb1@1' do not match any of the regexes: '^pinctrl-[0-9]+$', 'gpio@[0-9]+$' > from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# > arch/arm/boot/dts/nxp/mxs/imx28-cfa10058.dtb: pinctrl@80018000 (fsl,imx28-pinctrl): 'auart0-2pins@0', 'auart0@0', 'auart1-2pins@0', 'auart1@0', 'auart2-2pins@0', 'auart2-2pins@1', 'auart2-pins@0', 'auart3-2pins@0', 'auart3-2pins@1', 'auart3@0', 'auart4@0', 'auart4@1', 'can0@0', 'can1@0', 'duart-4pins@0', 'duart@0', 'duart@1', 'gpmi-nand@0', 'gpmi-status-cfg@0', 'i2c0@0', 'i2c0@1', 'i2c1@0', 'i2c1@1', 'lcdif-10058@0', 'lcdif-16bit@0', 'lcdif-18bit@0', 'lcdif-24bit@0', 'lcdif-sync@0', 'leds-10036@0', 'mac0@0', 'mac0@1', 'mac1@0', 'mmc0-4bit@0', 'mmc0-8bit@0', 'mmc0-cd-cfg@0', 'mmc0-sck-cfg@0', 'mmc1-4bit@0', 'mmc1-cd-cfg@0', 'mmc1-sck-cfg@0', 'mmc2-4bit@0', 'mmc2-4bit@1', 'mmc2-cd-cfg@0', 'mmc2-sck-cfg@0', 'mmc2-sck-cfg@1', 'mmc_pwr_cfa10036@0', 'otg-10036@0', 'pwm0@0', 'pwm2@0', 'pwm3@0', 'pwm3@1', 'pwm4@0', 'pwm7@0', 'saif0@0', 'saif0@1', 'saif1@0', 'spi2@0', 'spi3@0', 'spi3@1', 'ssd1306-10036@0', 'usb-10058@0', 'usb0@0', 'usb0@1', 'usb0id1@0', 'usb0id@0', 'usb1@0', 'usb1@1' do not m > atch any of the regexes: '^pinctrl-[0-9]+$', 'gpio@[0-9]+$' > from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# > arch/arm/boot/dts/nxp/mxs/imx28-btt3-1.dtb: pinctrl@80018000 (fsl,imx28-pinctrl): 'auart0-2pins@0', 'auart0@0', 'auart1-2pins@0', 'auart1@0', 'auart2-2pins@0', 'auart2-2pins@1', 'auart2-pins@0', 'auart3-2pins@0', 'auart3-2pins@1', 'auart3@0', 'auart4@0', 'auart4@1', 'can0@0', 'can1@0', 'duart-4pins@0', 'duart@0', 'duart@1', 'gpmi-nand@0', 'gpmi-status-cfg@0', 'hog@0', 'hog@1', 'i2c0@0', 'i2c0@1', 'i2c1@0', 'i2c1@1', 'keypad-bttc@0', 'lcdif-16bit@0', 'lcdif-18bit@0', 'lcdif-24bit@0', 'lcdif-bttc@0', 'lcdif-bttc@1', 'lcdif-sync@0', 'mac0@0', 'mac0@1', 'mac1@0', 'mmc0-4bit@0', 'mmc0-8bit@0', 'mmc0-cd-cfg@0', 'mmc0-sck-cfg@0', 'mmc1-4bit@0', 'mmc1-cd-cfg@0', 'mmc1-sck-cfg@0', 'mmc2-4bit@0', 'mmc2-4bit@1', 'mmc2-cd-cfg@0', 'mmc2-sck-cfg@0', 'mmc2-sck-cfg@1', 'pwm0@0', 'pwm2@0', 'pwm3@0', 'pwm3@1', 'pwm4@0', 'pwm7@0', 'saif0@0', 'saif0@1', 'saif1@0', 'spi2@0', 'spi3@0', 'spi3@1', 'ssp1-sdio@0', 'usb0@0', 'usb0@1', 'usb0id1@0', 'usb0id@0', 'usb1@0', 'usb1@1', 'wifi-en-pin@0' do not match an > y of the regexes: '^pinctrl-[0-9]+$', 'gpio@[0-9]+$' > from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# > arch/arm/boot/dts/nxp/mxs/imx28-eukrea-mbmx283lc.dtb: pinctrl@80018000 (fsl,imx28-pinctrl): 'auart0-2pins@0', 'auart0@0', 'auart1-2pins@0', 'auart1@0', 'auart2-2pins@0', 'auart2-2pins@1', 'auart2-pins@0', 'auart3-2pins@0', 'auart3-2pins@1', 'auart3@0', 'auart4@0', 'auart4@1', 'can0@0', 'can1@0', 'duart-4pins@0', 'duart@0', 'duart@1', 'gpio-button-sw3-mbmx28lc@0', 'gpio-button-sw4-mbmx28lc@0', 'gpmi-nand@0', 'gpmi-status-cfg@0', 'hog-cpuimx283@0', 'i2c0@0', 'i2c0@1', 'i2c1@0', 'i2c1@1', 'lcd-3v3-mbmx28lc@0', 'lcdif-16bit@0', 'lcdif-18bit@0', 'lcdif-24bit@0', 'lcdif-mbmx28lc@0', 'lcdif-sync@0', 'led-d6-mbmx28lc@0', 'led-d7-mbmx28lc@0', 'mac0@0', 'mac0@1', 'mac1@0', 'mmc0-4bit@0', 'mmc0-8bit@0', 'mmc0-cd-cfg@0', 'mmc0-sck-cfg@0', 'mmc1-4bit@0', 'mmc1-cd-cfg@0', 'mmc1-sck-cfg@0', 'mmc2-4bit@0', 'mmc2-4bit@1', 'mmc2-cd-cfg@0', 'mmc2-sck-cfg@0', 'mmc2-sck-cfg@1', 'pwm0@0', 'pwm2@0', 'pwm3@0', 'pwm3@1', 'pwm4@0', 'pwm7@0', 'reg-usb0-vbus-mbmx28lc@0', 'reg-usb1-vbus-mbmx28lc@0', 'saif0@0', ' > saif0@1', 'saif1@0', 'spi2@0', 'spi3@0', 'spi3@1', 'usb0@0', 'usb0@1', 'usb0id1@0', 'usb0id@0', 'usb1@0', 'usb1@1' do not match any of the regexes: '^pinctrl-[0-9]+$', 'gpio@[0-9]+$' > from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# > arch/arm/boot/dts/nxp/mxs/imx28-sps1.dtb: pinctrl@80018000 (fsl,imx28-pinctrl): 'auart0-2pins@0', 'auart0@0', 'auart1-2pins@0', 'auart1@0', 'auart2-2pins@0', 'auart2-2pins@1', 'auart2-pins@0', 'auart3-2pins@0', 'auart3-2pins@1', 'auart3@0', 'auart4@0', 'auart4@1', 'can0@0', 'can1@0', 'duart-4pins@0', 'duart@0', 'duart@1', 'gpmi-nand@0', 'gpmi-status-cfg@0', 'hog-gpios@0', 'i2c0@0', 'i2c0@1', 'i2c1@0', 'i2c1@1', 'lcdif-16bit@0', 'lcdif-18bit@0', 'lcdif-24bit@0', 'lcdif-sync@0', 'mac0@0', 'mac0@1', 'mac1@0', 'mmc0-4bit@0', 'mmc0-8bit@0', 'mmc0-cd-cfg@0', 'mmc0-sck-cfg@0', 'mmc1-4bit@0', 'mmc1-cd-cfg@0', 'mmc1-sck-cfg@0', 'mmc2-4bit@0', 'mmc2-4bit@1', 'mmc2-cd-cfg@0', 'mmc2-sck-cfg@0', 'mmc2-sck-cfg@1', 'pwm0@0', 'pwm2@0', 'pwm3@0', 'pwm3@1', 'pwm4@0', 'pwm7@0', 'saif0@0', 'saif0@1', 'saif1@0', 'spi2@0', 'spi3@0', 'spi3@1', 'usb0@0', 'usb0@1', 'usb0id1@0', 'usb0id@0', 'usb1@0', 'usb1@1' do not match any of the regexes: '^pinctrl-[0-9]+$', 'gpio@[0-9]+$' > from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# > arch/arm/boot/dts/nxp/mxs/imx28-apf28dev.dtb: pinctrl@80018000 (fsl,imx28-pinctrl): 'auart0-2pins@0', 'auart0@0', 'auart1-2pins@0', 'auart1@0', 'auart2-2pins@0', 'auart2-2pins@1', 'auart2-pins@0', 'auart3-2pins@0', 'auart3-2pins@1', 'auart3@0', 'auart4@0', 'auart4@1', 'can0@0', 'can1@0', 'duart-4pins@0', 'duart@0', 'duart@1', 'gpmi-nand@0', 'gpmi-status-cfg@0', 'hog@0', 'i2c0@0', 'i2c0@1', 'i2c1@0', 'i2c1@1', 'lcdif-16bit@0', 'lcdif-18bit@0', 'lcdif-24bit@0', 'lcdif-apf28dev@0', 'lcdif-sync@0', 'mac0@0', 'mac0@1', 'mac1@0', 'mmc0-4bit@0', 'mmc0-8bit@0', 'mmc0-cd-cfg@0', 'mmc0-sck-cfg@0', 'mmc1-4bit@0', 'mmc1-cd-cfg@0', 'mmc1-sck-cfg@0', 'mmc2-4bit@0', 'mmc2-4bit@1', 'mmc2-cd-cfg@0', 'mmc2-sck-cfg@0', 'mmc2-sck-cfg@1', 'otg-apf28dev@0', 'pwm0@0', 'pwm2@0', 'pwm3@0', 'pwm3@1', 'pwm4@0', 'pwm7@0', 'saif0@0', 'saif0@1', 'saif1@0', 'spi2@0', 'spi3@0', 'spi3@1', 'usb0@0', 'usb0@1', 'usb0id1@0', 'usb0id@0', 'usb1@0', 'usb1@1' do not match any of the regexes: '^pinctrl-[0-9]+$', 'gpio@[0-9]+ > $' > from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# > arch/arm/boot/dts/nxp/mxs/imx28-cfa10055.dtb: pinctrl@80018000 (fsl,imx28-pinctrl): 'auart0-2pins@0', 'auart0@0', 'auart1-2pins@0', 'auart1@0', 'auart2-2pins@0', 'auart2-2pins@1', 'auart2-pins@0', 'auart3-2pins@0', 'auart3-2pins@1', 'auart3@0', 'auart4@0', 'auart4@1', 'can0@0', 'can1@0', 'duart-4pins@0', 'duart@0', 'duart@1', 'gpmi-nand@0', 'gpmi-status-cfg@0', 'i2c0@0', 'i2c0@1', 'i2c1@0', 'i2c1@1', 'lcdif-10055-pullup@0', 'lcdif-16bit@0', 'lcdif-18bit@0', 'lcdif-24bit@0', 'lcdif-evk@0', 'lcdif-sync@0', 'leds-10036@0', 'mac0-10037@0', 'mac0@0', 'mac0@1', 'mac1@0', 'mmc0-4bit@0', 'mmc0-8bit@0', 'mmc0-cd-cfg@0', 'mmc0-sck-cfg@0', 'mmc1-4bit@0', 'mmc1-cd-cfg@0', 'mmc1-sck-cfg@0', 'mmc2-4bit@0', 'mmc2-4bit@1', 'mmc2-cd-cfg@0', 'mmc2-sck-cfg@0', 'mmc2-sck-cfg@1', 'mmc_pwr_cfa10036@0', 'otg-10036@0', 'pwm0@0', 'pwm2@0', 'pwm3@0', 'pwm3@1', 'pwm4@0', 'pwm7@0', 'saif0@0', 'saif0@1', 'saif1@0', 'spi2-cfa10055@0', 'spi2@0', 'spi3@0', 'spi3@1', 'ssd1306-10036@0', 'usb-10037@0', 'usb0@0', 'usb0 > @1', 'usb0id1@0', 'usb0id@0', 'usb1@0', 'usb1@1' do not match any of the regexes: '^pinctrl-[0-9]+$', 'gpio@[0-9]+$' > from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# > arch/arm/boot/dts/nxp/mxs/imx28-cfa10057.dtb: pinctrl@80018000 (fsl,imx28-pinctrl): 'auart0-2pins@0', 'auart0@0', 'auart1-2pins@0', 'auart1@0', 'auart2-2pins@0', 'auart2-2pins@1', 'auart2-pins@0', 'auart3-2pins@0', 'auart3-2pins@1', 'auart3@0', 'auart4@0', 'auart4@1', 'can0@0', 'can1@0', 'duart-4pins@0', 'duart@0', 'duart@1', 'gpmi-nand@0', 'gpmi-status-cfg@0', 'i2c0@0', 'i2c0@1', 'i2c1@0', 'i2c1@1', 'lcdif-16bit@0', 'lcdif-18bit@0', 'lcdif-24bit@0', 'lcdif-evk@0', 'lcdif-sync@0', 'leds-10036@0', 'mac0@0', 'mac0@1', 'mac1@0', 'mmc0-4bit@0', 'mmc0-8bit@0', 'mmc0-cd-cfg@0', 'mmc0-sck-cfg@0', 'mmc1-4bit@0', 'mmc1-cd-cfg@0', 'mmc1-sck-cfg@0', 'mmc2-4bit@0', 'mmc2-4bit@1', 'mmc2-cd-cfg@0', 'mmc2-sck-cfg@0', 'mmc2-sck-cfg@1', 'mmc_pwr_cfa10036@0', 'otg-10036@0', 'pwm0@0', 'pwm2@0', 'pwm3@0', 'pwm3@1', 'pwm4@0', 'pwm7@0', 'saif0@0', 'saif0@1', 'saif1@0', 'spi2@0', 'spi3@0', 'spi3@1', 'ssd1306-10036@0', 'usb-10057@0', 'usb0@0', 'usb0@1', 'usb0id1@0', 'usb0id@0', 'usb1@0', 'usb1@1' do not mat > ch any of the regexes: '^pinctrl-[0-9]+$', 'gpio@[0-9]+$' > from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# > arch/arm/boot/dts/nxp/mxs/imx28-btt3-2.dtb: pinctrl@80018000 (fsl,imx28-pinctrl): 'auart0-2pins@0', 'auart0@0', 'auart1-2pins@0', 'auart1@0', 'auart2-2pins@0', 'auart2-2pins@1', 'auart2-pins@0', 'auart3-2pins@0', 'auart3-2pins@1', 'auart3@0', 'auart4@0', 'auart4@1', 'can0@0', 'can1@0', 'duart-4pins@0', 'duart@0', 'duart@1', 'gpmi-nand@0', 'gpmi-status-cfg@0', 'hog@0', 'hog@1', 'i2c0@0', 'i2c0@1', 'i2c1@0', 'i2c1@1', 'keypad-bttc@0', 'lcdif-16bit@0', 'lcdif-18bit@0', 'lcdif-24bit@0', 'lcdif-bttc@0', 'lcdif-bttc@1', 'lcdif-sync@0', 'mac0@0', 'mac0@1', 'mac1@0', 'mmc0-4bit@0', 'mmc0-8bit@0', 'mmc0-cd-cfg@0', 'mmc0-sck-cfg@0', 'mmc1-4bit@0', 'mmc1-cd-cfg@0', 'mmc1-sck-cfg@0', 'mmc2-4bit@0', 'mmc2-4bit@1', 'mmc2-cd-cfg@0', 'mmc2-sck-cfg@0', 'mmc2-sck-cfg@1', 'pwm0@0', 'pwm2@0', 'pwm3@0', 'pwm3@1', 'pwm4@0', 'pwm7@0', 'saif0@0', 'saif0@1', 'saif1@0', 'spi2@0', 'spi3@0', 'spi3@1', 'ssp1-sdio@0', 'usb0@0', 'usb0@1', 'usb0id1@0', 'usb0id@0', 'usb1@0', 'usb1@1', 'wifi-en-pin@0' do not match an > y of the regexes: '^pinctrl-[0-9]+$', 'gpio@[0-9]+$' > from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# > arch/arm/boot/dts/nxp/mxs/imx28-evk.dtb: pinctrl@80018000 (fsl,imx28-pinctrl): 'auart0-2pins@0', 'auart0@0', 'auart1-2pins@0', 'auart1@0', 'auart2-2pins@0', 'auart2-2pins@1', 'auart2-pins@0', 'auart3-2pins@0', 'auart3-2pins@1', 'auart3@0', 'auart4@0', 'auart4@1', 'can0@0', 'can1@0', 'duart-4pins@0', 'duart@0', 'duart@1', 'gpmi-nand-evk@0', 'gpmi-nand@0', 'gpmi-status-cfg@0', 'hog@0', 'i2c0@0', 'i2c0@1', 'i2c1@0', 'i2c1@1', 'lcdif-16bit@0', 'lcdif-18bit@0', 'lcdif-24bit@0', 'lcdif-evk@0', 'lcdif-sync@0', 'led_gpio3_5@0', 'mac0@0', 'mac0@1', 'mac1@0', 'mmc0-4bit@0', 'mmc0-8bit@0', 'mmc0-cd-cfg@0', 'mmc0-sck-cfg@0', 'mmc1-4bit@0', 'mmc1-cd-cfg@0', 'mmc1-sck-cfg@0', 'mmc2-4bit@0', 'mmc2-4bit@1', 'mmc2-cd-cfg@0', 'mmc2-sck-cfg@0', 'mmc2-sck-cfg@1', 'pwm0@0', 'pwm2@0', 'pwm3@0', 'pwm3@1', 'pwm4@0', 'pwm7@0', 'saif0@0', 'saif0@1', 'saif1@0', 'spi2@0', 'spi3@0', 'spi3@1', 'usb0@0', 'usb0@1', 'usb0id1@0', 'usb0id@0', 'usb1@0', 'usb1@1' do not match any of the regexes: '^pinctrl-[0-9]+$', 'gpi > o@[0-9]+$' > from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# > arch/arm/boot/dts/nxp/mxs/imx28-duckbill-2.dtb: pinctrl@80018000 (fsl,imx28-pinctrl): 'auart0-2pins@0', 'auart0@0', 'auart1-2pins@0', 'auart1@0', 'auart2-2pins@0', 'auart2-2pins@1', 'auart2-pins@0', 'auart3-2pins@0', 'auart3-2pins@1', 'auart3@0', 'auart4@0', 'auart4@1', 'can0@0', 'can1@0', 'duart-4pins@0', 'duart@0', 'duart@1', 'gpmi-nand@0', 'gpmi-status-cfg@0', 'hog@0', 'i2c0@0', 'i2c0@1', 'i2c1@0', 'i2c1@1', 'lcdif-16bit@0', 'lcdif-18bit@0', 'lcdif-24bit@0', 'lcdif-sync@0', 'leds@0', 'mac0-phy-int@0', 'mac0-phy-reset@0', 'mac0@0', 'mac0@1', 'mac1@0', 'mmc0-4bit@0', 'mmc0-8bit@0', 'mmc0-cd-cfg@0', 'mmc0-sck-cfg@0', 'mmc1-4bit@0', 'mmc1-cd-cfg@0', 'mmc1-sck-cfg@0', 'mmc2-4bit@0', 'mmc2-4bit@1', 'mmc2-cd-cfg@0', 'mmc2-sck-cfg@0', 'mmc2-sck-cfg@1', 'pwm0@0', 'pwm2@0', 'pwm3@0', 'pwm3@1', 'pwm4@0', 'pwm7@0', 'saif0@0', 'saif0@1', 'saif1@0', 'spi2@0', 'spi3@0', 'spi3@1', 'usb0@0', 'usb0@1', 'usb0id1@0', 'usb0id@0', 'usb1@0', 'usb1@1' do not match any of the regexes: '^pinctrl-[0-9]+$', > 'gpio@[0-9]+$' > from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# > arch/arm/boot/dts/nxp/mxs/imx28-cfa10049.dtb: pinctrl@80018000 (fsl,imx28-pinctrl): 'auart0-2pins@0', 'auart0@0', 'auart1-2pins@0', 'auart1@0', 'auart2-2pins@0', 'auart2-2pins@1', 'auart2-pins@0', 'auart3-2pins@0', 'auart3-2pins@1', 'auart3@0', 'auart4@0', 'auart4@1', 'can0@0', 'can1@0', 'duart-4pins@0', 'duart@0', 'duart@1', 'gpmi-nand@0', 'gpmi-status-cfg@0', 'i2c0@0', 'i2c0@1', 'i2c1@0', 'i2c1@1', 'i2cmux-10049@0', 'lcdif-10049-pullup@0', 'lcdif-16bit@0', 'lcdif-18bit@0', 'lcdif-24bit@0', 'lcdif-evk@0', 'lcdif-sync@0', 'leds-10036@0', 'mac0-10049@0', 'mac0@0', 'mac0@1', 'mac1@0', 'mmc0-4bit@0', 'mmc0-8bit@0', 'mmc0-cd-cfg@0', 'mmc0-sck-cfg@0', 'mmc1-4bit@0', 'mmc1-cd-cfg@0', 'mmc1-sck-cfg@0', 'mmc2-4bit@0', 'mmc2-4bit@1', 'mmc2-cd-cfg@0', 'mmc2-sck-cfg@0', 'mmc2-sck-cfg@1', 'mmc_pwr_cfa10036@0', 'otg-10036@0', 'pca-10049@0', 'pwm0@0', 'pwm2@0', 'pwm3@0', 'pwm3@1', 'pwm4@0', 'pwm7@0', 'rotary-10049@0', 'rotary-btn-10049@0', 'saif0@0', 'saif0@1', 'saif1@0', 'spi2-cfa10049@0', 'spi2@ > 0', 'spi3-cfa10049@0', 'spi3@0', 'spi3@1', 'ssd1306-10036@0', 'usb-10049@0', 'usb0@0', 'usb0@1', 'usb0id1@0', 'usb0id@0', 'usb1@0', 'usb1@1' do not match any of the regexes: '^pinctrl-[0-9]+$', 'gpio@[0-9]+$' > from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# > arch/arm/boot/dts/nxp/mxs/imx28-ts4600.dtb: pinctrl@80018000 (fsl,imx28-pinctrl): 'auart0-2pins@0', 'auart0@0', 'auart1-2pins@0', 'auart1@0', 'auart2-2pins@0', 'auart2-2pins@1', 'auart2-pins@0', 'auart3-2pins@0', 'auart3-2pins@1', 'auart3@0', 'auart4@0', 'auart4@1', 'can0@0', 'can1@0', 'duart-4pins@0', 'duart@0', 'duart@1', 'en-sd-pwr@0', 'gpmi-nand@0', 'gpmi-status-cfg@0', 'i2c0@0', 'i2c0@1', 'i2c1@0', 'i2c1@1', 'lcdif-16bit@0', 'lcdif-18bit@0', 'lcdif-24bit@0', 'lcdif-sync@0', 'mac0@0', 'mac0@1', 'mac1@0', 'mmc0-4bit@0', 'mmc0-8bit@0', 'mmc0-cd-cfg@0', 'mmc0-sck-cfg@0', 'mmc1-4bit@0', 'mmc1-cd-cfg@0', 'mmc1-sck-cfg@0', 'mmc2-4bit@0', 'mmc2-4bit@1', 'mmc2-cd-cfg@0', 'mmc2-sck-cfg@0', 'mmc2-sck-cfg@1', 'pwm0@0', 'pwm2@0', 'pwm3@0', 'pwm3@1', 'pwm4@0', 'pwm7@0', 'saif0@0', 'saif0@1', 'saif1@0', 'spi2@0', 'spi3@0', 'spi3@1', 'usb0@0', 'usb0@1', 'usb0id1@0', 'usb0id@0', 'usb1@0', 'usb1@1' do not match any of the regexes: '^pinctrl-[0-9]+$', 'gpio@[0-9]+$' > from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# > arch/arm/boot/dts/nxp/mxs/imx28-m28cu3.dtb: pinctrl@80018000 (fsl,imx28-pinctrl): 'auart0-2pins@0', 'auart0@0', 'auart1-2pins@0', 'auart1@0', 'auart2-2pins@0', 'auart2-2pins@1', 'auart2-pins@0', 'auart3-2pins@0', 'auart3-2pins@1', 'auart3@0', 'auart4@0', 'auart4@1', 'can0@0', 'can1@0', 'duart-4pins@0', 'duart@0', 'duart@1', 'gpmi-nand@0', 'gpmi-status-cfg@0', 'hog@0', 'i2c0@0', 'i2c0@1', 'i2c1@0', 'i2c1@1', 'lcdif-16bit@0', 'lcdif-18bit@0', 'lcdif-24bit@0', 'lcdif-m28@0', 'lcdif-sync@0', 'leds-m28@0', 'mac0@0', 'mac0@1', 'mac1@0', 'mmc0-4bit@0', 'mmc0-8bit@0', 'mmc0-cd-cfg@0', 'mmc0-sck-cfg@0', 'mmc1-4bit@0', 'mmc1-cd-cfg@0', 'mmc1-sck-cfg@0', 'mmc2-4bit@0', 'mmc2-4bit@1', 'mmc2-cd-cfg@0', 'mmc2-sck-cfg@0', 'mmc2-sck-cfg@1', 'pwm0@0', 'pwm2@0', 'pwm3@0', 'pwm3@1', 'pwm4@0', 'pwm7@0', 'saif0@0', 'saif0@1', 'saif1@0', 'spi2@0', 'spi3@0', 'spi3@1', 'usb0@0', 'usb0@1', 'usb0id1@0', 'usb0id@0', 'usb1@0', 'usb1@1' do not match any of the regexes: '^pinctrl-[0-9]+$', 'gpio@[0-9]+$' > from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# > arch/arm/boot/dts/nxp/mxs/imx28-m28evk.dtb: pinctrl@80018000 (fsl,imx28-pinctrl): 'auart0-2pins@0', 'auart0@0', 'auart1-2pins@0', 'auart1@0', 'auart2-2pins@0', 'auart2-2pins@1', 'auart2-pins@0', 'auart3-2pins@0', 'auart3-2pins@1', 'auart3@0', 'auart4@0', 'auart4@1', 'can0@0', 'can1@0', 'duart-4pins@0', 'duart@0', 'duart@1', 'gpmi-nand@0', 'gpmi-status-cfg@0', 'hog@0', 'i2c0@0', 'i2c0@1', 'i2c1@0', 'i2c1@1', 'lcdif-16bit@0', 'lcdif-18bit@0', 'lcdif-24bit@0', 'lcdif-m28@0', 'lcdif-sync@0', 'mac0@0', 'mac0@1', 'mac1@0', 'mmc0-4bit@0', 'mmc0-8bit@0', 'mmc0-cd-cfg@0', 'mmc0-sck-cfg@0', 'mmc1-4bit@0', 'mmc1-cd-cfg@0', 'mmc1-sck-cfg@0', 'mmc2-4bit@0', 'mmc2-4bit@1', 'mmc2-cd-cfg@0', 'mmc2-sck-cfg@0', 'mmc2-sck-cfg@1', 'pwm0@0', 'pwm2@0', 'pwm3@0', 'pwm3@1', 'pwm4@0', 'pwm7@0', 'saif0@0', 'saif0@1', 'saif1@0', 'spi2@0', 'spi3@0', 'spi3@1', 'usb0@0', 'usb0@1', 'usb0id1@0', 'usb0id@0', 'usb1@0', 'usb1@1' do not match any of the regexes: '^pinctrl-[0-9]+$', 'gpio@[0-9]+$' > from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# > arch/arm/boot/dts/nxp/mxs/imx28-duckbill-2-485.dtb: pinctrl@80018000 (fsl,imx28-pinctrl): 'auart0-2pins@0', 'auart0@0', 'auart1-2pins@0', 'auart1@0', 'auart2-2pins@0', 'auart2-2pins@1', 'auart2-pins@0', 'auart3-2pins@0', 'auart3-2pins@1', 'auart3@0', 'auart4@0', 'auart4@1', 'can0@0', 'can1@0', 'duart-4pins@0', 'duart@0', 'duart@1', 'gpmi-nand@0', 'gpmi-status-cfg@0', 'hog@0', 'i2c0@0', 'i2c0@1', 'i2c1@0', 'i2c1@1', 'lcdif-16bit@0', 'lcdif-18bit@0', 'lcdif-24bit@0', 'lcdif-sync@0', 'leds@0', 'mac0-phy-int@0', 'mac0-phy-reset@0', 'mac0@0', 'mac0@1', 'mac1@0', 'mmc0-4bit@0', 'mmc0-8bit@0', 'mmc0-cd-cfg@0', 'mmc0-sck-cfg@0', 'mmc1-4bit@0', 'mmc1-cd-cfg@0', 'mmc1-sck-cfg@0', 'mmc2-4bit@0', 'mmc2-4bit@1', 'mmc2-cd-cfg@0', 'mmc2-sck-cfg@0', 'mmc2-sck-cfg@1', 'pwm0@0', 'pwm2@0', 'pwm3@0', 'pwm3@1', 'pwm4@0', 'pwm7@0', 'saif0@0', 'saif0@1', 'saif1@0', 'spi2@0', 'spi3@0', 'spi3@1', 'usb0@0', 'usb0@1', 'usb0id1@0', 'usb0id@0', 'usb1@0', 'usb1@1' do not match any of the regexes: '^pinctrl-[0-9]+ > $', 'gpio@[0-9]+$' > from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# > arch/arm/boot/dts/nxp/mxs/imx28-eukrea-mbmx287lc.dtb: pinctrl@80018000 (fsl,imx28-pinctrl): 'auart0-2pins@0', 'auart0@0', 'auart1-2pins@0', 'auart1@0', 'auart2-2pins@0', 'auart2-2pins@1', 'auart2-pins@0', 'auart3-2pins@0', 'auart3-2pins@1', 'auart3@0', 'auart4@0', 'auart4@1', 'can0@0', 'can1@0', 'duart-4pins@0', 'duart@0', 'duart@1', 'gpio-button-sw3-mbmx28lc@0', 'gpio-button-sw4-mbmx28lc@0', 'gpmi-nand@0', 'gpmi-status-cfg@0', 'hog-cpuimx283@0', 'hog-cpuimx287@0', 'i2c0@0', 'i2c0@1', 'i2c1@0', 'i2c1@1', 'lcd-3v3-mbmx28lc@0', 'lcdif-16bit@0', 'lcdif-18bit@0', 'lcdif-24bit@0', 'lcdif-mbmx28lc@0', 'lcdif-sync@0', 'led-d6-mbmx28lc@0', 'led-d7-mbmx28lc@0', 'mac0@0', 'mac0@1', 'mac1@0', 'mmc0-4bit@0', 'mmc0-8bit@0', 'mmc0-cd-cfg@0', 'mmc0-sck-cfg@0', 'mmc1-4bit@0', 'mmc1-cd-cfg@0', 'mmc1-sck-cfg@0', 'mmc2-4bit@0', 'mmc2-4bit@1', 'mmc2-cd-cfg@0', 'mmc2-sck-cfg@0', 'mmc2-sck-cfg@1', 'pwm0@0', 'pwm2@0', 'pwm3@0', 'pwm3@1', 'pwm4@0', 'pwm7@0', 'reg-usb0-vbus-mbmx28lc@0', 'reg-usb1-vbus-mbmx28 > lc@0', 'saif0@0', 'saif0@1', 'saif1@0', 'spi2@0', 'spi3@0', 'spi3@1', 'usb0@0', 'usb0@1', 'usb0id1@0', 'usb0id@0', 'usb1@0', 'usb1@1' do not match any of the regexes: '^pinctrl-[0-9]+$', 'gpio@[0-9]+$' > from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# > arch/arm/boot/dts/nxp/lpc/lpc3250-phy3250.dtb: /ahb/flash@20020000: failed to match any schema with compatible: ['nxp,lpc3220-slc'] > > > > > -- Dario Binacchi Senior Embedded Linux Developer dario.binacchi@amarulasolutions.com __________________________________ Amarula Solutions SRL Via Le Canevare 30, 31100 Treviso, Veneto, IT T. +39 042 243 5310 info@amarulasolutions.com www.amarulasolutions.com ^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2025-05-28 8:41 UTC | newest] Thread overview: 12+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2025-05-21 9:28 [PATCH 0/3] Support i.MX28 Amarula rmm board Dario Binacchi 2025-05-21 9:28 ` [PATCH 1/3] ARM: dts: imx28: add pwm7 muxing options Dario Binacchi 2025-05-21 9:28 ` [PATCH 2/3] dt-bindings: arm: fsl: add i.MX28 Amarula rmm board Dario Binacchi 2025-05-21 9:28 ` [PATCH 3/3] ARM: dts: mxs: support " Dario Binacchi 2025-05-21 9:35 ` Marc Kleine-Budde 2025-05-21 10:32 ` Dario Binacchi 2025-05-21 12:59 ` Marc Kleine-Budde 2025-05-21 11:40 ` Fabio Estevam 2025-05-21 13:19 ` Dario Binacchi 2025-05-23 13:05 ` Fabio Estevam 2025-05-21 12:56 ` [PATCH 0/3] Support " Rob Herring (Arm) 2025-05-28 8:40 ` Dario Binacchi
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).