[PATCH v5 2/4] clocksource/drivers/timer-vt8500: Add defines for magic constants

[Alexey Charkov <alchark@gmail.com>]

Add defines for all known registers and their bits to make the code more
self-explanatory. While at that, replace _VAL suffixes with more
intuitive _REG suffixes on register offsets.

No functional changes.

Signed-off-by: Alexey Charkov <alchark@gmail.com>
---
 drivers/clocksource/timer-vt8500.c | 65 ++++++++++++++++++++++++--------------
 1 file changed, 42 insertions(+), 23 deletions(-)

diff --git a/drivers/clocksource/timer-vt8500.c b/drivers/clocksource/timer-vt8500.c
index a469b1b5f97233202bf01298b9f612e07026c20c..9f28f30dcaf83ab4e9c89952175b0d4c75bd6b40 100644
--- a/drivers/clocksource/timer-vt8500.c
+++ b/drivers/clocksource/timer-vt8500.c
@@ -24,15 +24,31 @@
 
 #define VT8500_TIMER_OFFSET	0x0100
 #define VT8500_TIMER_HZ		3000000
-#define TIMER_MATCH_VAL		0x0000
-#define TIMER_COUNT_VAL		0x0010
-#define TIMER_STATUS_VAL	0x0014
-#define TIMER_IER_VAL		0x001c		/* interrupt enable */
-#define TIMER_CTRL_VAL		0x0020
-#define TIMER_AS_VAL		0x0024		/* access status */
-#define TIMER_COUNT_R_ACTIVE	(1 << 5)	/* not ready for read */
-#define TIMER_COUNT_W_ACTIVE	(1 << 4)	/* not ready for write */
-#define TIMER_MATCH_W_ACTIVE	(1 << 0)	/* not ready for write */
+
+#define TIMER_MATCH_REG(x)	(4 * (x))
+#define TIMER_COUNT_REG		0x0010	 /* clocksource counter */
+
+#define TIMER_STATUS_REG	0x0014
+#define TIMER_STATUS_MATCH(x)	BIT((x))
+#define TIMER_STATUS_CLEARALL	(TIMER_STATUS_MATCH(0) | \
+				 TIMER_STATUS_MATCH(1) | \
+				 TIMER_STATUS_MATCH(2) | \
+				 TIMER_STATUS_MATCH(3))
+
+#define TIMER_WATCHDOG_EN_REG	0x0018
+#define TIMER_WD_EN		BIT(0)
+
+#define TIMER_INT_EN_REG	0x001c	 /* interrupt enable */
+#define TIMER_INT_EN_MATCH(x)	BIT((x))
+
+#define TIMER_CTRL_REG		0x0020
+#define TIMER_CTRL_ENABLE	BIT(0)	 /* enable clocksource counter */
+#define TIMER_CTRL_RD_REQ	BIT(1)	 /* request counter read */
+
+#define TIMER_ACC_STS_REG	0x0024	 /* access status */
+#define TIMER_ACC_WR_MATCH(x)	BIT((x)) /* writing Match (x) value */
+#define TIMER_ACC_WR_COUNTER	BIT(4)	 /* writing clocksource counter */
+#define TIMER_ACC_RD_COUNTER	BIT(5)	 /* reading clocksource counter */
 
 #define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
 
@@ -43,11 +59,12 @@ static void __iomem *regbase;
 static u64 vt8500_timer_read(struct clocksource *cs)
 {
 	int loops = msecs_to_loops(10);
-	writel(3, regbase + TIMER_CTRL_VAL);
-	while ((readl((regbase + TIMER_AS_VAL)) & TIMER_COUNT_R_ACTIVE)
-						&& --loops)
+
+	writel(TIMER_CTRL_ENABLE | TIMER_CTRL_RD_REQ, regbase + TIMER_CTRL_REG);
+	while (readl(regbase + TIMER_ACC_STS_REG) & TIMER_ACC_RD_COUNTER
+	     && --loops)
 		cpu_relax();
-	return readl(regbase + TIMER_COUNT_VAL);
+	return readl(regbase + TIMER_COUNT_REG);
 }
 
 static struct clocksource clocksource = {
@@ -63,23 +80,25 @@ static int vt8500_timer_set_next_event(unsigned long cycles,
 {
 	int loops = msecs_to_loops(10);
 	u64 alarm = clocksource.read(&clocksource) + cycles;
-	while ((readl(regbase + TIMER_AS_VAL) & TIMER_MATCH_W_ACTIVE)
-						&& --loops)
+
+	while (readl(regbase + TIMER_ACC_STS_REG) & TIMER_ACC_WR_MATCH(0)
+	       && --loops)
 		cpu_relax();
-	writel((unsigned long)alarm, regbase + TIMER_MATCH_VAL);
+	writel((unsigned long)alarm, regbase + TIMER_MATCH_REG(0));
 
 	if ((signed)(alarm - clocksource.read(&clocksource)) <= MIN_OSCR_DELTA)
 		return -ETIME;
 
-	writel(1, regbase + TIMER_IER_VAL);
+	writel(TIMER_INT_EN_MATCH(0), regbase + TIMER_INT_EN_REG);
 
 	return 0;
 }
 
 static int vt8500_shutdown(struct clock_event_device *evt)
 {
-	writel(readl(regbase + TIMER_CTRL_VAL) | 1, regbase + TIMER_CTRL_VAL);
-	writel(0, regbase + TIMER_IER_VAL);
+	writel(readl(regbase + TIMER_CTRL_REG) | TIMER_CTRL_ENABLE,
+	       regbase + TIMER_CTRL_REG);
+	writel(0, regbase + TIMER_INT_EN_REG);
 	return 0;
 }
 
@@ -95,7 +114,7 @@ static struct clock_event_device clockevent = {
 static irqreturn_t vt8500_timer_interrupt(int irq, void *dev_id)
 {
 	struct clock_event_device *evt = dev_id;
-	writel(0xf, regbase + TIMER_STATUS_VAL);
+	writel(TIMER_STATUS_CLEARALL, regbase + TIMER_STATUS_REG);
 	evt->event_handler(evt);
 
 	return IRQ_HANDLED;
@@ -119,9 +138,9 @@ static int __init vt8500_timer_init(struct device_node *np)
 		return -EINVAL;
 	}
 
-	writel(1, regbase + TIMER_CTRL_VAL);
-	writel(0xf, regbase + TIMER_STATUS_VAL);
-	writel(~0, regbase + TIMER_MATCH_VAL);
+	writel(TIMER_CTRL_ENABLE, regbase + TIMER_CTRL_REG);
+	writel(TIMER_STATUS_CLEARALL, regbase + TIMER_STATUS_REG);
+	writel(~0, regbase + TIMER_MATCH_REG(0));
 
 	ret = clocksource_register_hz(&clocksource, VT8500_TIMER_HZ);
 	if (ret) {

-- 
2.49.0