[PATCH v3 00/12] qrb4210-rb2: add wsa audio playback and capture support

[Alexey Klimov <alexey.klimov@linaro.org>]

Rebased, updated, re-tested. This implements the playback support via the
following path: RX1 from DSP is connected to rxmacro which communicates
with wcd codec using soundwire. This goes into AUX input of wcd. Wcd codec
outputs analog audio into wsa8815 amplifier. Capturing works through vamacro
using one onboard DMIC which is directly connected to vamacro codec.

Changes since v2:
-- dropped [PATCH v2 08/14] dt-bindings: arm: qcom-soc: extend pattern matching
to support qcom,wsa881x and replaced with new one;
-- dropped [PATCH v2 14/14] ASoC: qcom: sm8250: force single channel via RX_1 output for qrb4210
-- reordered as suggested by Krzysztof;
-- updates to wsa881x-common.h registers descriptions and corresponding updates
to wsa881x-common.c (Konrad);
-- sorted subnodes in DT alphabetically as suggested by Konrad;
-- wsa881x bindings updates (as suggested by Krzysztof);
-- ASoC: dt-bindings: qcom: Add SM6115 LPASS rxmacro and vamacro codecs
is still present;
-- added "qcom,wsa8810" compatible to wsa881x-i2c.c;
-- wsa881x is still present in wsa881x_probe_common();

Second version:
https://lore.kernel.org/linux-arm-msm/20241212004727.2903846-1-alexey.klimov@linaro.org/

First version:
https://lore.kernel.org/linux-sound/20241101053154.497550-1-alexey.klimov@linaro.org/

---
Alexey Klimov (12):
      ASoC: dt-bindings: qcom: Add SM6115 LPASS rxmacro and vamacro codecs
      dt-bindings: arm: qcom-soc: ignore "wsa" from being selected as SoC component
      ASoC: dt-bindings: qcom,wsa881x: extend description to analog mode
      ASoC: codecs: lpass-rx-macro: add sm6115 compatible
      ASoC: codecs: wsa881x: split into common and soundwire drivers
      ASoC: codecs: add wsa881x-i2c amplifier codec driver
      arm64: dts: qcom: sm6115: add LPASS devices
      arm64: dts: qcom: sm4250: add description of soundwire and dmic pins
      arm64: dts: qcom: qrb4210-rb2: add wcd937x codec support
      arm64: dts: qcom: qrb4210-rb2: enable wsa881x amplifier
      arm64: dts: qcom: qrb4210-rb2: add WSA audio playback support
      arm64: dts: qcom: qrb4210-rb2: add VA capture support

 .../devicetree/bindings/arm/qcom-soc.yaml          |    2 +-
 .../bindings/sound/qcom,lpass-rx-macro.yaml        |   19 +
 .../bindings/sound/qcom,lpass-va-macro.yaml        |   22 +-
 .../devicetree/bindings/sound/qcom,wsa881x.yaml    |   66 +-
 arch/arm64/boot/dts/qcom/qrb4210-rb2.dts           |  113 ++
 arch/arm64/boot/dts/qcom/sm4250.dtsi               |   62 +
 arch/arm64/boot/dts/qcom/sm6115.dtsi               |  132 ++
 sound/soc/codecs/Kconfig                           |   15 +
 sound/soc/codecs/Makefile                          |    4 +
 sound/soc/codecs/lpass-rx-macro.c                  |    4 +-
 sound/soc/codecs/wsa881x-common.c                  |  193 +++
 sound/soc/codecs/wsa881x-common.h                  |  478 +++++++
 sound/soc/codecs/wsa881x-i2c.c                     | 1353 ++++++++++++++++++++
 sound/soc/codecs/wsa881x.c                         |  493 +------
 14 files changed, 2459 insertions(+), 497 deletions(-)
---
base-commit: 7bac2c97af4078d7a627500c9bcdd5b033f97718
change-id: 20250522-rb2_audio_v3-ffa12dcc6148

Best regards,
-- 
Alexey Klimov <alexey.klimov@linaro.org>