The Linux Kernel Mailing List
 help / color / mirror / Atom feed
From: Kory Maincent <kory.maincent@bootlin.com>
To: Tony Lindgren <tony@atomide.com>, Rob Herring <robh@kernel.org>,
	 Krzysztof Kozlowski <krzk+dt@kernel.org>,
	 Conor Dooley <conor+dt@kernel.org>,
	Aaro Koskinen <aaro.koskinen@iki.fi>,
	 Andreas Kemnade <andreas@kemnade.info>,
	Kevin Hilman <khilman@baylibre.com>,
	 Roger Quadros <rogerq@kernel.org>,
	Russell King <linux@armlinux.org.uk>
Cc: Bajjuri Praneeth <praneeth@ti.com>,
	Liam Girdwood <lgirdwood@gmail.com>,
	 Mark Brown <broonie@kernel.org>,
	 Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	linux-omap@vger.kernel.org,  devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	 linux-arm-kernel@lists.infradead.org,
	 Kory Maincent <kory.maincent@bootlin.com>
Subject: [PATCH 1/2] arm: dts: omap: Add support for BeagleBone Green Eco board
Date: Fri, 23 May 2025 17:57:42 +0200	[thread overview]
Message-ID: <20250523-bbg-v1-1-ef4a9e57eeee@bootlin.com> (raw)
In-Reply-To: <20250523-bbg-v1-0-ef4a9e57eeee@bootlin.com>

SeeedStudio BeagleBone Green Eco (BBGE) is a clone of the BeagleBone Green
(BBG). It has minor differences from the BBG, such as a different PMIC,
a different Ethernet PHY, and a larger eMMC.

Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
---

The pmic binding is currently only in regulator tree. I don't know if it
should be merged in omap tree or in regulator tree due to that binding
dependency.
---
 arch/arm/boot/dts/ti/omap/Makefile                 |   1 +
 arch/arm/boot/dts/ti/omap/am335x-bonegreen-eco.dts | 170 +++++++++++++++++++++
 2 files changed, 171 insertions(+)

diff --git a/arch/arm/boot/dts/ti/omap/Makefile b/arch/arm/boot/dts/ti/omap/Makefile
index 95c68135dd0c..1aef60eef671 100644
--- a/arch/arm/boot/dts/ti/omap/Makefile
+++ b/arch/arm/boot/dts/ti/omap/Makefile
@@ -93,6 +93,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \
 	am335x-boneblue.dtb \
 	am335x-bonegreen.dtb \
 	am335x-bonegreen-wireless.dtb \
+	am335x-bonegreen-eco.dtb \
 	am335x-chiliboard.dtb \
 	am335x-cm-t335.dtb \
 	am335x-evm.dtb \
diff --git a/arch/arm/boot/dts/ti/omap/am335x-bonegreen-eco.dts b/arch/arm/boot/dts/ti/omap/am335x-bonegreen-eco.dts
new file mode 100644
index 000000000000..521f92347bbe
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/am335x-bonegreen-eco.dts
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2025 Bootlin
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
+#include "am335x-bonegreen-common.dtsi"
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	model = "TI AM335x BeagleBone Green Eco";
+	compatible = "ti,am335x-bone-green-eco", "ti,am335x-bone-green",
+		     "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&buck1>;
+		};
+	};
+
+	sys_5v: sys-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "sys_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	v3v3: v3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "v3v3";
+		regulator-always-on;
+	};
+};
+
+&usb0 {
+	interrupts-extended = <&intc 18>;
+	interrupt-names = "mc";
+};
+
+&baseboard_eeprom {
+	vcc-supply = <&v3v3>;
+};
+
+&i2c0 {
+	/delete-node/ tps@24;
+
+	tps65214: tps@30 {
+		compatible = "ti,tps65214";
+		reg = <0x30>;
+		buck1-supply = <&sys_5v>;
+		buck2-supply = <&sys_5v>;
+		buck3-supply = <&sys_5v>;
+		ldo1-supply = <&sys_5v>;
+		ldo2-supply = <&sys_5v>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <7>;
+		pinctrl-0 = <&pmic_irq_pins_default>;
+
+		regulators {
+			buck1: buck1 {
+				regulator-name = "vdd_mpu";
+				regulator-min-microvolt = <925000>;
+				regulator-max-microvolt = <1351500>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck2: buck2 {
+				regulator-name = "vdd_core";
+				regulator-min-microvolt = <925000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck3: buck3 {
+				regulator-name = "vdds_ddr";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+
+			ldo1_reg: ldo1 {
+				regulator-name = "vdd_1v8_1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: ldo2 {
+				regulator-name = "vdd_1v8_2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&cpsw_port1 {
+	phy-mode = "rgmii-id";
+	phy-handle = <&dp83867_0>;
+	ti,dual-emac-pvid = <1>;
+};
+
+&mac_sw {
+	pinctrl-0 = <&cpsw_b_default>;
+	pinctrl-1 = <&cpsw_b_sleep>;
+};
+
+&davinci_mdio_sw {
+	/delete-node/ ethernet-phy@0;
+
+	dp83867_0: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+		ti,min-output-impedance;
+		ti,dp83867-rxctrl-strap-quirk;
+	};
+};
+
+&am33xx_pinmux {
+	cpsw_b_default: cpsw-b-default-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2)
+		>;
+	};
+
+	cpsw_b_sleep: cpsw-b-sleep-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	pmic_irq_pins_default: pmic-irq-default-pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(AM335X_PIN_NNMI, PIN_INPUT_PULLUP | MUX_MODE0)
+		>;
+	};
+};

-- 
2.43.0


  reply	other threads:[~2025-05-23 15:58 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-05-23 15:57 [PATCH 0/2] Add support for BeagleBone Green Eco board Kory Maincent
2025-05-23 15:57 ` Kory Maincent [this message]
2025-05-23 19:43   ` [PATCH 1/2] arm: dts: omap: " Andreas Kemnade
2025-05-23 15:57 ` [PATCH 2/2] arm: omap2plus_defconfig: Enable TPS65219 regulator Kory Maincent
2025-05-23 19:48   ` Andreas Kemnade
2025-05-23 19:17 ` [PATCH 0/2] Add support for BeagleBone Green Eco board Rob Herring (Arm)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250523-bbg-v1-1-ef4a9e57eeee@bootlin.com \
    --to=kory.maincent@bootlin.com \
    --cc=aaro.koskinen@iki.fi \
    --cc=andreas@kemnade.info \
    --cc=broonie@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=khilman@baylibre.com \
    --cc=krzk+dt@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=praneeth@ti.com \
    --cc=robh@kernel.org \
    --cc=rogerq@kernel.org \
    --cc=thomas.petazzoni@bootlin.com \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox