From: Ronak Doshi <ronak.doshi@broadcom.com>
To: netdev@vger.kernel.org
Cc: Ronak Doshi <ronak.doshi@broadcom.com>,
Guolin Yang <guolin.yang@broadcom.com>,
Broadcom internal kernel review list
<bcm-kernel-feedback-list@broadcom.com>,
Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
linux-kernel@vger.kernel.org (open list)
Subject: [PATCH net v4] vmxnet3: correctly report gso type for UDP tunnels
Date: Fri, 30 May 2025 15:27:00 +0000 [thread overview]
Message-ID: <20250530152701.70354-1-ronak.doshi@broadcom.com> (raw)
Commit 3d010c8031e3 ("udp: do not accept non-tunnel GSO skbs landing
in a tunnel") added checks in linux stack to not accept non-tunnel
GRO packets landing in a tunnel. This exposed an issue in vmxnet3
which was not correctly reporting GRO packets for tunnel packets.
This patch fixes this issue by setting correct GSO type for the
tunnel packets.
Currently, vmxnet3 does not support reporting inner fields for LRO
tunnel packets. The issue is not seen for egress drivers that do not
use skb inner fields. The workaround is to enable tnl-segmentation
offload on the egress interfaces if the driver supports it. This
problem pre-exists this patch fix and can be addressed as a separate
future patch.
Fixes: dacce2be3312 ("vmxnet3: add geneve and vxlan tunnel offload support")
Signed-off-by: Ronak Doshi <ronak.doshi@broadcom.com>
Acked-by: Guolin Yang <guolin.yang@broadcom.com>
Changes v1-->v2:
Do not set encapsulation bit as inner fields are not updated
Changes v2-->v3:
Update the commit message explaining the next steps to address
segmentation issues that pre-exists this patch fix.
Changes v3->v4:
Update the commit message to clarify the workaround.
---
drivers/net/vmxnet3/vmxnet3_drv.c | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c
index c676979c7ab9..287b7c20c0d6 100644
--- a/drivers/net/vmxnet3/vmxnet3_drv.c
+++ b/drivers/net/vmxnet3/vmxnet3_drv.c
@@ -1568,6 +1568,30 @@ vmxnet3_get_hdr_len(struct vmxnet3_adapter *adapter, struct sk_buff *skb,
return (hlen + (hdr.tcp->doff << 2));
}
+static void
+vmxnet3_lro_tunnel(struct sk_buff *skb, __be16 ip_proto)
+{
+ struct udphdr *uh = NULL;
+
+ if (ip_proto == htons(ETH_P_IP)) {
+ struct iphdr *iph = (struct iphdr *)skb->data;
+
+ if (iph->protocol == IPPROTO_UDP)
+ uh = (struct udphdr *)(iph + 1);
+ } else {
+ struct ipv6hdr *iph = (struct ipv6hdr *)skb->data;
+
+ if (iph->nexthdr == IPPROTO_UDP)
+ uh = (struct udphdr *)(iph + 1);
+ }
+ if (uh) {
+ if (uh->check)
+ skb_shinfo(skb)->gso_type |= SKB_GSO_UDP_TUNNEL_CSUM;
+ else
+ skb_shinfo(skb)->gso_type |= SKB_GSO_UDP_TUNNEL;
+ }
+}
+
static int
vmxnet3_rq_rx_complete(struct vmxnet3_rx_queue *rq,
struct vmxnet3_adapter *adapter, int quota)
@@ -1881,6 +1905,8 @@ vmxnet3_rq_rx_complete(struct vmxnet3_rx_queue *rq,
if (segCnt != 0 && mss != 0) {
skb_shinfo(skb)->gso_type = rcd->v4 ?
SKB_GSO_TCPV4 : SKB_GSO_TCPV6;
+ if (encap_lro)
+ vmxnet3_lro_tunnel(skb, skb->protocol);
skb_shinfo(skb)->gso_size = mss;
skb_shinfo(skb)->gso_segs = segCnt;
} else if ((segCnt != 0 || skb->len > mtu) && !encap_lro) {
--
2.45.2
next reply other threads:[~2025-05-30 15:44 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-30 15:27 Ronak Doshi [this message]
2025-06-03 7:23 ` [PATCH net v4] vmxnet3: correctly report gso type for UDP tunnels Simon Horman
2025-06-03 9:27 ` Paolo Abeni
2025-06-03 10:10 ` patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250530152701.70354-1-ronak.doshi@broadcom.com \
--to=ronak.doshi@broadcom.com \
--cc=andrew+netdev@lunn.ch \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=guolin.yang@broadcom.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox