From: Cosmin Tanislav <demonsingur@gmail.com>
Cc: Sean Young <sean@mess.org>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
Cosmin Tanislav <demonsingur@gmail.com>
Subject: [PATCH v3] media: rc: ir-spi: allocate buffer dynamically
Date: Mon, 9 Jun 2025 14:17:13 +0300 [thread overview]
Message-ID: <20250609111715.2572138-1-demonsingur@gmail.com> (raw)
Replace the static transmit buffer with a dynamically allocated one,
removing the limit imposed on the number of pulses to transmit.
Calculate the number of pulses for each duration in the received buffer
ahead of time, while also adding up the total pulses, to be able to
allocate a buffer that perfectly fits the total number of pulses, then
populate it.
Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com>
---
V3:
* move the allocation to be done per-TX operation
V2:
* use devm_krealloc_array
drivers/media/rc/ir-spi.c | 33 ++++++++++++++++++++-------------
1 file changed, 20 insertions(+), 13 deletions(-)
diff --git a/drivers/media/rc/ir-spi.c b/drivers/media/rc/ir-spi.c
index 8fc8e496e6aa..50e30e2fae22 100644
--- a/drivers/media/rc/ir-spi.c
+++ b/drivers/media/rc/ir-spi.c
@@ -21,13 +21,11 @@
#define IR_SPI_DRIVER_NAME "ir-spi"
#define IR_SPI_DEFAULT_FREQUENCY 38000
-#define IR_SPI_MAX_BUFSIZE 4096
struct ir_spi_data {
u32 freq;
bool negated;
- u16 tx_buf[IR_SPI_MAX_BUFSIZE];
u16 pulse;
u16 space;
@@ -43,37 +41,42 @@ static int ir_spi_tx(struct rc_dev *dev, unsigned int *buffer, unsigned int coun
unsigned int len = 0;
struct ir_spi_data *idata = dev->priv;
struct spi_transfer xfer;
+ u16 *tx_buf;
/* convert the pulse/space signal to raw binary signal */
for (i = 0; i < count; i++) {
- unsigned int periods;
+ buffer[i] = DIV_ROUND_CLOSEST(buffer[i] * idata->freq, 1000000);
+ len += buffer[i];
+ }
+
+ tx_buf = kmalloc_array(len, sizeof(*tx_buf), GFP_KERNEL);
+ if (!tx_buf)
+ return -ENOMEM;
+
+ len = 0;
+ for (i = 0; i < count; i++) {
int j;
u16 val;
- periods = DIV_ROUND_CLOSEST(buffer[i] * idata->freq, 1000000);
-
- if (len + periods >= IR_SPI_MAX_BUFSIZE)
- return -EINVAL;
-
/*
* The first value in buffer is a pulse, so that 0, 2, 4, ...
* contain a pulse duration. On the contrary, 1, 3, 5, ...
* contain a space duration.
*/
val = (i % 2) ? idata->space : idata->pulse;
- for (j = 0; j < periods; j++)
- idata->tx_buf[len++] = val;
+ for (j = 0; j < buffer[i]; j++)
+ tx_buf[len++] = val;
}
memset(&xfer, 0, sizeof(xfer));
xfer.speed_hz = idata->freq * 16;
- xfer.len = len * sizeof(*idata->tx_buf);
- xfer.tx_buf = idata->tx_buf;
+ xfer.len = len * sizeof(*tx_buf);
+ xfer.tx_buf = tx_buf;
ret = regulator_enable(idata->regulator);
if (ret)
- return ret;
+ goto err_free_tx_buf;
ret = spi_sync_transfer(idata->spi, &xfer, 1);
if (ret)
@@ -81,6 +84,10 @@ static int ir_spi_tx(struct rc_dev *dev, unsigned int *buffer, unsigned int coun
regulator_disable(idata->regulator);
+err_free_tx_buf:
+
+ kfree(tx_buf);
+
return ret ? ret : count;
}
--
2.49.0
next reply other threads:[~2025-06-09 11:17 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-09 11:17 Cosmin Tanislav [this message]
2025-06-10 9:39 ` [PATCH v3] media: rc: ir-spi: allocate buffer dynamically Sean Young
2025-06-10 10:15 ` Cosmin Tanislav
2025-06-10 13:21 ` Sean Young
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250609111715.2572138-1-demonsingur@gmail.com \
--to=demonsingur@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=sean@mess.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox