[PATCH net-next v4 00/14] net: dsa: b53: fix BCM5325 support

[PATCH net-next v4 00/14] net: dsa: b53: fix BCM5325 support

[Álvaro Fernández Rojas]

These patches get the BCM5325 switch working with b53.

The existing brcm legacy tag only works with BCM63xx switches.
We need to add a new legacy tag for BCM5325 and BCM5365 switches, which
require including the FCS and length.

I'm not really sure that everything here is correct since I don't work for
Broadcom and all this is based on the public datasheet available for the
BCM5325 and my own experiments with a Huawei HG556a (BCM6358).

Both sets of patches have been merged due to the change requested by Jonas
about BRCM_HDR register access depending on legacy tags.

 v4: introduce changes requested by Jonas and other improvements:
  - Fix line length warning.
  - Introduce variant_id field in b53_device.
  - Move B53_VLAN_ID_IDX BCM5325M check to variants patch.
  - Reduce number of ARL buckets for BCM5325E.
  - Disable ARLIO_PAGE->VLAN_ID_IDX access for BCM5325M.
  - Avoid in_range() confusion.
  - Ensure PD_MODE_POWER_DOWN_PORT(0) is cleared.
  - Improve B53_PD_MODE_CTRL_25 register defines.

 v3: introduce changes requested by Florian, Jonas and Jakub:
  - Improve brcm legacy tag Kconfig description, use __le32 and crc32_le().
  - Detect BCM5325 variants as requested by Florian.
  - B53_VLAN_ID_IDX exists in newer BCM5325E switches.
  - Check for legacy tag protocols instead of is5325() for B53_BRCM_HDR.
  - Use in_range() helper for B53_PD_MODE_CTRL_25.

 v2: introduce changes requested by Jonas, Florian and Vladimir:
  - Add b53_arl_to_entry_25 function.
  - Add b53_arl_from_entry_25 function.
  - Add b53_arl_read_25 function, fixing usage of ARLTBL_VALID_25 and
    ARLTBL_VID_MASK_25.
  - Change b53_set_forwarding function flow.
  - Disallow BR_LEARNING on b53_br_flags_pre() for BCM5325.
  - Drop rate control registers.
  - Move B53_PD_MODE_CTRL_25 to b53_setup_port().
  - Replace swab32 with cpu_to_le32.

Florian Fainelli (1):
  net: dsa: b53: add support for FDB operations on 5325/5365

Álvaro Fernández Rojas (13):
  net: dsa: tag_brcm: legacy: reorganize functions
  net: dsa: tag_brcm: add support for legacy FCS tags
  net: dsa: b53: support legacy FCS tags
  net: dsa: b53: detect BCM5325 variants
  net: dsa: b53: prevent FAST_AGE access on BCM5325
  net: dsa: b53: prevent SWITCH_CTRL access on BCM5325
  net: dsa: b53: fix IP_MULTICAST_CTRL on BCM5325
  net: dsa: b53: prevent DIS_LEARNING access on BCM5325
  net: dsa: b53: prevent BRCM_HDR access on older devices
  net: dsa: b53: prevent GMII_PORT_OVERRIDE_CTRL access on BCM5325
  net: dsa: b53: fix unicast/multicast flooding on BCM5325
  net: dsa: b53: fix b53_imp_vlan_setup for BCM5325
  net: dsa: b53: ensure BCM5325 PHYs are enabled

 drivers/net/dsa/b53/Kconfig      |   1 +
 drivers/net/dsa/b53/b53_common.c | 284 ++++++++++++++++++++++++-------
 drivers/net/dsa/b53/b53_priv.h   |  48 ++++++
 drivers/net/dsa/b53/b53_regs.h   |  27 ++-
 include/net/dsa.h                |   2 +
 net/dsa/Kconfig                  |  16 +-
 net/dsa/tag_brcm.c               | 119 ++++++++++---
 7 files changed, 408 insertions(+), 89 deletions(-)

-- 
2.39.5

[PATCH net-next v4 01/14] net: dsa: tag_brcm: legacy: reorganize functions

[Álvaro Fernández Rojas]

Move brcm_leg_tag_rcv() definition to top.
This function is going to be shared between two different tags.

Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
 net/dsa/tag_brcm.c | 64 +++++++++++++++++++++++-----------------------
 1 file changed, 32 insertions(+), 32 deletions(-)

 v4: no changes

 v3: no changes

 v2: no changes

diff --git a/net/dsa/tag_brcm.c b/net/dsa/tag_brcm.c
index fe75821623a4..9f4b0bcd95cd 100644
--- a/net/dsa/tag_brcm.c
+++ b/net/dsa/tag_brcm.c
@@ -213,6 +213,38 @@ MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_BRCM, BRCM_NAME);
 #endif
 
 #if IS_ENABLED(CONFIG_NET_DSA_TAG_BRCM_LEGACY)
+static struct sk_buff *brcm_leg_tag_rcv(struct sk_buff *skb,
+					struct net_device *dev)
+{
+	int len = BRCM_LEG_TAG_LEN;
+	int source_port;
+	u8 *brcm_tag;
+
+	if (unlikely(!pskb_may_pull(skb, BRCM_LEG_TAG_LEN + VLAN_HLEN)))
+		return NULL;
+
+	brcm_tag = dsa_etype_header_pos_rx(skb);
+
+	source_port = brcm_tag[5] & BRCM_LEG_PORT_ID;
+
+	skb->dev = dsa_conduit_find_user(dev, 0, source_port);
+	if (!skb->dev)
+		return NULL;
+
+	/* VLAN tag is added by BCM63xx internal switch */
+	if (netdev_uses_dsa(skb->dev))
+		len += VLAN_HLEN;
+
+	/* Remove Broadcom tag and update checksum */
+	skb_pull_rcsum(skb, len);
+
+	dsa_default_offload_fwd_mark(skb);
+
+	dsa_strip_etype_header(skb, len);
+
+	return skb;
+}
+
 static struct sk_buff *brcm_leg_tag_xmit(struct sk_buff *skb,
 					 struct net_device *dev)
 {
@@ -250,38 +282,6 @@ static struct sk_buff *brcm_leg_tag_xmit(struct sk_buff *skb,
 	return skb;
 }
 
-static struct sk_buff *brcm_leg_tag_rcv(struct sk_buff *skb,
-					struct net_device *dev)
-{
-	int len = BRCM_LEG_TAG_LEN;
-	int source_port;
-	u8 *brcm_tag;
-
-	if (unlikely(!pskb_may_pull(skb, BRCM_LEG_TAG_LEN + VLAN_HLEN)))
-		return NULL;
-
-	brcm_tag = dsa_etype_header_pos_rx(skb);
-
-	source_port = brcm_tag[5] & BRCM_LEG_PORT_ID;
-
-	skb->dev = dsa_conduit_find_user(dev, 0, source_port);
-	if (!skb->dev)
-		return NULL;
-
-	/* VLAN tag is added by BCM63xx internal switch */
-	if (netdev_uses_dsa(skb->dev))
-		len += VLAN_HLEN;
-
-	/* Remove Broadcom tag and update checksum */
-	skb_pull_rcsum(skb, len);
-
-	dsa_default_offload_fwd_mark(skb);
-
-	dsa_strip_etype_header(skb, len);
-
-	return skb;
-}
-
 static const struct dsa_device_ops brcm_legacy_netdev_ops = {
 	.name = BRCM_LEGACY_NAME,
 	.proto = DSA_TAG_PROTO_BRCM_LEGACY,
-- 
2.39.5

[PATCH net-next v4 02/14] net: dsa: tag_brcm: add support for legacy FCS tags

[Álvaro Fernández Rojas]

Add support for legacy Broadcom FCS tags, which are similar to
DSA_TAG_PROTO_BRCM_LEGACY.
BCM5325 and BCM5365 switches require including the original FCS value and
length, as opposed to BCM63xx switches.
Adding the original FCS value and length to DSA_TAG_PROTO_BRCM_LEGACY would
impact performance of BCM63xx switches, so it's better to create a new tag.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
 include/net/dsa.h  |  2 ++
 net/dsa/Kconfig    | 16 ++++++++--
 net/dsa/tag_brcm.c | 73 +++++++++++++++++++++++++++++++++++++++++++++-
 3 files changed, 88 insertions(+), 3 deletions(-)

 v4: fix line length warning.

 v3: fix warnings:
  - Improve Kconfig description.
  - Use __le32 type.
  - Use crc32_le() instead of crc32().

 v2: replace swab32 with cpu_to_le32.

diff --git a/include/net/dsa.h b/include/net/dsa.h
index 55e2d97f247e..d73ea0880066 100644
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -54,11 +54,13 @@ struct tc_action;
 #define DSA_TAG_PROTO_RZN1_A5PSW_VALUE		26
 #define DSA_TAG_PROTO_LAN937X_VALUE		27
 #define DSA_TAG_PROTO_VSC73XX_8021Q_VALUE	28
+#define DSA_TAG_PROTO_BRCM_LEGACY_FCS_VALUE	29
 
 enum dsa_tag_protocol {
 	DSA_TAG_PROTO_NONE		= DSA_TAG_PROTO_NONE_VALUE,
 	DSA_TAG_PROTO_BRCM		= DSA_TAG_PROTO_BRCM_VALUE,
 	DSA_TAG_PROTO_BRCM_LEGACY	= DSA_TAG_PROTO_BRCM_LEGACY_VALUE,
+	DSA_TAG_PROTO_BRCM_LEGACY_FCS	= DSA_TAG_PROTO_BRCM_LEGACY_FCS_VALUE,
 	DSA_TAG_PROTO_BRCM_PREPEND	= DSA_TAG_PROTO_BRCM_PREPEND_VALUE,
 	DSA_TAG_PROTO_DSA		= DSA_TAG_PROTO_DSA_VALUE,
 	DSA_TAG_PROTO_EDSA		= DSA_TAG_PROTO_EDSA_VALUE,
diff --git a/net/dsa/Kconfig b/net/dsa/Kconfig
index 2dfe9063613f..869cbe57162f 100644
--- a/net/dsa/Kconfig
+++ b/net/dsa/Kconfig
@@ -42,12 +42,24 @@ config NET_DSA_TAG_BRCM
 	  Broadcom switches which place the tag after the MAC source address.
 
 config NET_DSA_TAG_BRCM_LEGACY
-	tristate "Tag driver for Broadcom legacy switches using in-frame headers"
+	tristate "Tag driver for BCM63xx legacy switches using in-frame headers"
 	select NET_DSA_TAG_BRCM_COMMON
 	help
 	  Say Y if you want to enable support for tagging frames for the
-	  Broadcom legacy switches which place the tag after the MAC source
+	  BCM63xx legacy switches which place the tag after the MAC source
 	  address.
+	  This tag is used in BCM63xx legacy switches which work without the
+	  original FCS and length before the tag insertion.
+
+config NET_DSA_TAG_BRCM_LEGACY_FCS
+	tristate "Tag driver for BCM53xx legacy switches using in-frame headers"
+	select NET_DSA_TAG_BRCM_COMMON
+	help
+	  Say Y if you want to enable support for tagging frames for the
+	  BCM53xx legacy switches which place the tag after the MAC source
+	  address.
+	  This tag is used in BCM53xx legacy switches which expect original
+	  FCS and length before the tag insertion to be present.
 
 config NET_DSA_TAG_BRCM_PREPEND
 	tristate "Tag driver for Broadcom switches using prepended headers"
diff --git a/net/dsa/tag_brcm.c b/net/dsa/tag_brcm.c
index 9f4b0bcd95cd..26bb657ceac3 100644
--- a/net/dsa/tag_brcm.c
+++ b/net/dsa/tag_brcm.c
@@ -15,6 +15,7 @@
 
 #define BRCM_NAME		"brcm"
 #define BRCM_LEGACY_NAME	"brcm-legacy"
+#define BRCM_LEGACY_FCS_NAME	"brcm-legacy-fcs"
 #define BRCM_PREPEND_NAME	"brcm-prepend"
 
 /* Legacy Broadcom tag (6 bytes) */
@@ -32,6 +33,10 @@
 #define BRCM_LEG_MULTICAST	(1 << 5)
 #define BRCM_LEG_EGRESS		(2 << 5)
 #define BRCM_LEG_INGRESS	(3 << 5)
+#define BRCM_LEG_LEN_HI(x)	(((x) >> 8) & 0x7)
+
+/* 4th byte in the tag */
+#define BRCM_LEG_LEN_LO(x)	((x) & 0xff)
 
 /* 6th byte in the tag */
 #define BRCM_LEG_PORT_ID	(0xf)
@@ -212,7 +217,8 @@ DSA_TAG_DRIVER(brcm_netdev_ops);
 MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_BRCM, BRCM_NAME);
 #endif
 
-#if IS_ENABLED(CONFIG_NET_DSA_TAG_BRCM_LEGACY)
+#if IS_ENABLED(CONFIG_NET_DSA_TAG_BRCM_LEGACY) || \
+	IS_ENABLED(CONFIG_NET_DSA_TAG_BRCM_LEGACY_FCS)
 static struct sk_buff *brcm_leg_tag_rcv(struct sk_buff *skb,
 					struct net_device *dev)
 {
@@ -244,7 +250,9 @@ static struct sk_buff *brcm_leg_tag_rcv(struct sk_buff *skb,
 
 	return skb;
 }
+#endif /* CONFIG_NET_DSA_TAG_BRCM_LEGACY || CONFIG_NET_DSA_TAG_BRCM_LEGACY_FCS */
 
+#if IS_ENABLED(CONFIG_NET_DSA_TAG_BRCM_LEGACY)
 static struct sk_buff *brcm_leg_tag_xmit(struct sk_buff *skb,
 					 struct net_device *dev)
 {
@@ -294,6 +302,66 @@ DSA_TAG_DRIVER(brcm_legacy_netdev_ops);
 MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_BRCM_LEGACY, BRCM_LEGACY_NAME);
 #endif /* CONFIG_NET_DSA_TAG_BRCM_LEGACY */
 
+#if IS_ENABLED(CONFIG_NET_DSA_TAG_BRCM_LEGACY_FCS)
+static struct sk_buff *brcm_leg_fcs_tag_xmit(struct sk_buff *skb,
+					     struct net_device *dev)
+{
+	struct dsa_port *dp = dsa_user_to_port(dev);
+	unsigned int fcs_len;
+	__le32 fcs_val;
+	u8 *brcm_tag;
+
+	/* The Ethernet switch we are interfaced with needs packets to be at
+	 * least 64 bytes (including FCS) otherwise they will be discarded when
+	 * they enter the switch port logic. When Broadcom tags are enabled, we
+	 * need to make sure that packets are at least 70 bytes (including FCS
+	 * and tag) because the length verification is done after the Broadcom
+	 * tag is stripped off the ingress packet.
+	 *
+	 * Let dsa_user_xmit() free the SKB.
+	 */
+	if (__skb_put_padto(skb, ETH_ZLEN + BRCM_LEG_TAG_LEN, false))
+		return NULL;
+
+	fcs_len = skb->len;
+	fcs_val = cpu_to_le32(crc32_le(~0, skb->data, fcs_len) ^ ~0);
+
+	skb_push(skb, BRCM_LEG_TAG_LEN);
+
+	dsa_alloc_etype_header(skb, BRCM_LEG_TAG_LEN);
+
+	brcm_tag = skb->data + 2 * ETH_ALEN;
+
+	/* Broadcom tag type */
+	brcm_tag[0] = BRCM_LEG_TYPE_HI;
+	brcm_tag[1] = BRCM_LEG_TYPE_LO;
+
+	/* Broadcom tag value */
+	brcm_tag[2] = BRCM_LEG_EGRESS | BRCM_LEG_LEN_HI(fcs_len);
+	brcm_tag[3] = BRCM_LEG_LEN_LO(fcs_len);
+	brcm_tag[4] = 0;
+	brcm_tag[5] = dp->index & BRCM_LEG_PORT_ID;
+
+	/* Original FCS value */
+	if (__skb_pad(skb, ETH_FCS_LEN, false))
+		return NULL;
+	skb_put_data(skb, &fcs_val, ETH_FCS_LEN);
+
+	return skb;
+}
+
+static const struct dsa_device_ops brcm_legacy_fcs_netdev_ops = {
+	.name = BRCM_LEGACY_FCS_NAME,
+	.proto = DSA_TAG_PROTO_BRCM_LEGACY_FCS,
+	.xmit = brcm_leg_fcs_tag_xmit,
+	.rcv = brcm_leg_tag_rcv,
+	.needed_headroom = BRCM_LEG_TAG_LEN,
+};
+
+DSA_TAG_DRIVER(brcm_legacy_fcs_netdev_ops);
+MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_BRCM_LEGACY_FCS, BRCM_LEGACY_FCS_NAME);
+#endif /* CONFIG_NET_DSA_TAG_BRCM_LEGACY_FCS */
+
 #if IS_ENABLED(CONFIG_NET_DSA_TAG_BRCM_PREPEND)
 static struct sk_buff *brcm_tag_xmit_prepend(struct sk_buff *skb,
 					     struct net_device *dev)
@@ -328,6 +396,9 @@ static struct dsa_tag_driver *dsa_tag_driver_array[] =	{
 #if IS_ENABLED(CONFIG_NET_DSA_TAG_BRCM_LEGACY)
 	&DSA_TAG_DRIVER_NAME(brcm_legacy_netdev_ops),
 #endif
+#if IS_ENABLED(CONFIG_NET_DSA_TAG_BRCM_LEGACY_FCS)
+	&DSA_TAG_DRIVER_NAME(brcm_legacy_fcs_netdev_ops),
+#endif
 #if IS_ENABLED(CONFIG_NET_DSA_TAG_BRCM_PREPEND)
 	&DSA_TAG_DRIVER_NAME(brcm_prepend_netdev_ops),
 #endif
-- 
2.39.5

[PATCH net-next v4 03/14] net: dsa: b53: support legacy FCS tags

[Álvaro Fernández Rojas]

Commit 46c5176c586c ("net: dsa: b53: support legacy tags") introduced
support for legacy tags, but it turns out that BCM5325 and BCM5365
switches require the original FCS value and length, so they have to be
treated differently.

Fixes: 46c5176c586c ("net: dsa: b53: support legacy tags")
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
 drivers/net/dsa/b53/Kconfig      | 1 +
 drivers/net/dsa/b53/b53_common.c | 7 +++++--
 2 files changed, 6 insertions(+), 2 deletions(-)

 v4: no changes

 v3: no changes

 v2: no changes

diff --git a/drivers/net/dsa/b53/Kconfig b/drivers/net/dsa/b53/Kconfig
index ebaa4a80d544..915008e8eff5 100644
--- a/drivers/net/dsa/b53/Kconfig
+++ b/drivers/net/dsa/b53/Kconfig
@@ -5,6 +5,7 @@ menuconfig B53
 	select NET_DSA_TAG_NONE
 	select NET_DSA_TAG_BRCM
 	select NET_DSA_TAG_BRCM_LEGACY
+	select NET_DSA_TAG_BRCM_LEGACY_FCS
 	select NET_DSA_TAG_BRCM_PREPEND
 	help
 	  This driver adds support for Broadcom managed switch chips. It supports
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index dc2f4adac9bc..9a038992f043 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -2241,8 +2241,11 @@ enum dsa_tag_protocol b53_get_tag_protocol(struct dsa_switch *ds, int port,
 		goto out;
 	}
 
-	/* Older models require a different 6 byte tag */
-	if (is5325(dev) || is5365(dev) || is63xx(dev)) {
+	/* Older models require different 6 byte tags */
+	if (is5325(dev) || is5365(dev)) {
+		dev->tag_protocol = DSA_TAG_PROTO_BRCM_LEGACY_FCS;
+		goto out;
+	} else if (is63xx(dev)) {
 		dev->tag_protocol = DSA_TAG_PROTO_BRCM_LEGACY;
 		goto out;
 	}
-- 
2.39.5

[PATCH net-next v4 04/14] net: dsa: b53: detect BCM5325 variants

[Álvaro Fernández Rojas]

We need to be able to differentiate the BCM5325 variants because:
- BCM5325M switches lack the ARLIO_PAGE->VLAN_ID_IDX register.
- BCM5325E have less 512 ARL buckets instead of 1024.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
 drivers/net/dsa/b53/b53_common.c | 24 +++++++++++++++++++++---
 drivers/net/dsa/b53/b53_priv.h   | 19 +++++++++++++++++++
 2 files changed, 40 insertions(+), 3 deletions(-)

 v4: add changes requested by Jonas and other improvements:
  - Introduce variant_id field in b53_device.
  - Reduce number of ARL buckets for BCM5325E.
  - Disable ARLIO_PAGE->VLAN_ID_IDX access for BCM5325M.

 v3: detect BCM5325 variants as requested by Florian.

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 9a038992f043..a7c75f44369a 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -1778,7 +1778,8 @@ static int b53_arl_op(struct b53_device *dev, int op, int port,
 
 	/* Perform a read for the given MAC and VID */
 	b53_write48(dev, B53_ARLIO_PAGE, B53_MAC_ADDR_IDX, mac);
-	b53_write16(dev, B53_ARLIO_PAGE, B53_VLAN_ID_IDX, vid);
+	if (!is5325m(dev))
+		b53_write16(dev, B53_ARLIO_PAGE, B53_VLAN_ID_IDX, vid);
 
 	/* Issue a read operation for this MAC */
 	ret = b53_arl_rw_op(dev, 1);
@@ -2833,6 +2834,9 @@ static int b53_switch_init(struct b53_device *dev)
 		}
 	}
 
+	if (is5325e(dev))
+		dev->num_arl_buckets = 512;
+
 	dev->num_ports = fls(dev->enabled_ports);
 
 	dev->ds->num_ports = min_t(unsigned int, dev->num_ports, DSA_MAX_PORTS);
@@ -2934,10 +2938,24 @@ int b53_switch_detect(struct b53_device *dev)
 		b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, 0xf);
 		b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, &tmp);
 
-		if (tmp == 0xf)
+		if (tmp == 0xf) {
+			u32 phy_id;
+			int val;
+
 			dev->chip_id = BCM5325_DEVICE_ID;
-		else
+
+			val = b53_phy_read16(dev->ds, 0, MII_PHYSID1);
+			phy_id = (val & 0xffff) << 16;
+			val = b53_phy_read16(dev->ds, 0, MII_PHYSID2);
+			phy_id |= (val & 0xfff0);
+
+			if (phy_id == 0x00406330)
+				dev->variant_id = B53_VARIANT_5325M;
+			else if (phy_id == 0x0143bc30)
+				dev->variant_id = B53_VARIANT_5325E;
+		} else {
 			dev->chip_id = BCM5365_DEVICE_ID;
+		}
 		break;
 	case BCM5389_DEVICE_ID:
 	case BCM5395_DEVICE_ID:
diff --git a/drivers/net/dsa/b53/b53_priv.h b/drivers/net/dsa/b53/b53_priv.h
index a5ef7071ba07..e8689410b5d0 100644
--- a/drivers/net/dsa/b53/b53_priv.h
+++ b/drivers/net/dsa/b53/b53_priv.h
@@ -84,6 +84,12 @@ enum {
 	BCM53134_DEVICE_ID = 0x5075,
 };
 
+enum b53_variant_id {
+	B53_VARIANT_NONE = 0,
+	B53_VARIANT_5325E,
+	B53_VARIANT_5325M,
+};
+
 struct b53_pcs {
 	struct phylink_pcs pcs;
 	struct b53_device *dev;
@@ -118,6 +124,7 @@ struct b53_device {
 
 	/* chip specific data */
 	u32 chip_id;
+	enum b53_variant_id variant_id;
 	u8 core_rev;
 	u8 vta_regs[3];
 	u8 duplex_reg;
@@ -165,6 +172,18 @@ static inline int is5325(struct b53_device *dev)
 	return dev->chip_id == BCM5325_DEVICE_ID;
 }
 
+static inline int is5325e(struct b53_device *dev)
+{
+	return is5325(dev) &&
+		dev->variant_id == B53_VARIANT_5325E;
+}
+
+static inline int is5325m(struct b53_device *dev)
+{
+	return is5325(dev) &&
+		dev->variant_id == B53_VARIANT_5325M;
+}
+
 static inline int is5365(struct b53_device *dev)
 {
 #ifdef CONFIG_BCM47XX
-- 
2.39.5

[PATCH net-next v4 05/14] net: dsa: b53: add support for FDB operations on 5325/5365

[Álvaro Fernández Rojas]

From: Florian Fainelli <f.fainelli@gmail.com>

BCM5325 and BCM5365 are part of a much older generation of switches which,
due to their limited number of ports and VLAN entries (up to 256) allowed
a single 64-bit register to hold a full ARL entry.
This requires a little bit of massaging when reading, writing and
converting ARL entries in both directions.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
 drivers/net/dsa/b53/b53_common.c | 101 +++++++++++++++++++++++++------
 drivers/net/dsa/b53/b53_priv.h   |  29 +++++++++
 drivers/net/dsa/b53/b53_regs.h   |   7 ++-
 3 files changed, 115 insertions(+), 22 deletions(-)

 v4: move B53_VLAN_ID_IDX BCM5325M check to the previous patch.

 v3: add changes requested by Florian:
  - B53_VLAN_ID_IDX exists in newer BCM5325E switches.

 v2: add changes requested by Jonas and fix proposed by Florian:
  - Add b53_arl_to_entry_25 function.
  - Add b53_arl_from_entry_25 function.
  - Add b53_arl_read_25 function, fixing usage of ARLTBL_VALID_25 and
    ARLTBL_VID_MASK_25.

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index a7c75f44369a..033cd78577f7 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -1764,6 +1764,45 @@ static int b53_arl_read(struct b53_device *dev, u64 mac,
 	return *idx >= dev->num_arl_bins ? -ENOSPC : -ENOENT;
 }
 
+static int b53_arl_read_25(struct b53_device *dev, u64 mac,
+			   u16 vid, struct b53_arl_entry *ent, u8 *idx)
+{
+	DECLARE_BITMAP(free_bins, B53_ARLTBL_MAX_BIN_ENTRIES);
+	unsigned int i;
+	int ret;
+
+	ret = b53_arl_op_wait(dev);
+	if (ret)
+		return ret;
+
+	bitmap_zero(free_bins, dev->num_arl_bins);
+
+	/* Read the bins */
+	for (i = 0; i < dev->num_arl_bins; i++) {
+		u64 mac_vid;
+
+		b53_read64(dev, B53_ARLIO_PAGE,
+			   B53_ARLTBL_MAC_VID_ENTRY(i), &mac_vid);
+
+		b53_arl_to_entry_25(ent, mac_vid);
+
+		if (!(mac_vid & ARLTBL_VALID_25)) {
+			set_bit(i, free_bins);
+			continue;
+		}
+		if ((mac_vid & ARLTBL_MAC_MASK) != mac)
+			continue;
+		if (dev->vlan_enabled &&
+		    ((mac_vid >> ARLTBL_VID_S_65) & ARLTBL_VID_MASK_25) != vid)
+			continue;
+		*idx = i;
+		return 0;
+	}
+
+	*idx = find_first_bit(free_bins, dev->num_arl_bins);
+	return *idx >= dev->num_arl_bins ? -ENOSPC : -ENOENT;
+}
+
 static int b53_arl_op(struct b53_device *dev, int op, int port,
 		      const unsigned char *addr, u16 vid, bool is_valid)
 {
@@ -1786,7 +1825,10 @@ static int b53_arl_op(struct b53_device *dev, int op, int port,
 	if (ret)
 		return ret;
 
-	ret = b53_arl_read(dev, mac, vid, &ent, &idx);
+	if (is5325(dev) || is5365(dev))
+		ret = b53_arl_read_25(dev, mac, vid, &ent, &idx);
+	else
+		ret = b53_arl_read(dev, mac, vid, &ent, &idx);
 
 	/* If this is a read, just finish now */
 	if (op)
@@ -1830,12 +1872,17 @@ static int b53_arl_op(struct b53_device *dev, int op, int port,
 	ent.is_static = true;
 	ent.is_age = false;
 	memcpy(ent.mac, addr, ETH_ALEN);
-	b53_arl_from_entry(&mac_vid, &fwd_entry, &ent);
+	if (is5325(dev) || is5365(dev))
+		b53_arl_from_entry_25(&mac_vid, &ent);
+	else
+		b53_arl_from_entry(&mac_vid, &fwd_entry, &ent);
 
 	b53_write64(dev, B53_ARLIO_PAGE,
 		    B53_ARLTBL_MAC_VID_ENTRY(idx), mac_vid);
-	b53_write32(dev, B53_ARLIO_PAGE,
-		    B53_ARLTBL_DATA_ENTRY(idx), fwd_entry);
+
+	if (!is5325(dev) && !is5365(dev))
+		b53_write32(dev, B53_ARLIO_PAGE,
+			    B53_ARLTBL_DATA_ENTRY(idx), fwd_entry);
 
 	return b53_arl_rw_op(dev, 0);
 }
@@ -1847,12 +1894,6 @@ int b53_fdb_add(struct dsa_switch *ds, int port,
 	struct b53_device *priv = ds->priv;
 	int ret;
 
-	/* 5325 and 5365 require some more massaging, but could
-	 * be supported eventually
-	 */
-	if (is5325(priv) || is5365(priv))
-		return -EOPNOTSUPP;
-
 	mutex_lock(&priv->arl_mutex);
 	ret = b53_arl_op(priv, 0, port, addr, vid, true);
 	mutex_unlock(&priv->arl_mutex);
@@ -1879,10 +1920,15 @@ EXPORT_SYMBOL(b53_fdb_del);
 static int b53_arl_search_wait(struct b53_device *dev)
 {
 	unsigned int timeout = 1000;
-	u8 reg;
+	u8 reg, offset;
+
+	if (is5325(dev) || is5365(dev))
+		offset = B53_ARL_SRCH_CTL_25;
+	else
+		offset = B53_ARL_SRCH_CTL;
 
 	do {
-		b53_read8(dev, B53_ARLIO_PAGE, B53_ARL_SRCH_CTL, &reg);
+		b53_read8(dev, B53_ARLIO_PAGE, offset, &reg);
 		if (!(reg & ARL_SRCH_STDN))
 			return 0;
 
@@ -1899,13 +1945,24 @@ static void b53_arl_search_rd(struct b53_device *dev, u8 idx,
 			      struct b53_arl_entry *ent)
 {
 	u64 mac_vid;
-	u32 fwd_entry;
 
-	b53_read64(dev, B53_ARLIO_PAGE,
-		   B53_ARL_SRCH_RSTL_MACVID(idx), &mac_vid);
-	b53_read32(dev, B53_ARLIO_PAGE,
-		   B53_ARL_SRCH_RSTL(idx), &fwd_entry);
-	b53_arl_to_entry(ent, mac_vid, fwd_entry);
+	if (is5325(dev)) {
+		b53_read64(dev, B53_ARLIO_PAGE, B53_ARL_SRCH_RSTL_0_MACVID_25,
+			   &mac_vid);
+		b53_arl_to_entry_25(ent, mac_vid);
+	} else if (is5365(dev)) {
+		b53_read64(dev, B53_ARLIO_PAGE, B53_ARL_SRCH_RSTL_0_MACVID_65,
+			   &mac_vid);
+		b53_arl_to_entry_25(ent, mac_vid);
+	} else {
+		u32 fwd_entry;
+
+		b53_read64(dev, B53_ARLIO_PAGE, B53_ARL_SRCH_RSTL_MACVID(idx),
+			   &mac_vid);
+		b53_read32(dev, B53_ARLIO_PAGE, B53_ARL_SRCH_RSTL(idx),
+			   &fwd_entry);
+		b53_arl_to_entry(ent, mac_vid, fwd_entry);
+	}
 }
 
 static int b53_fdb_copy(int port, const struct b53_arl_entry *ent,
@@ -1926,14 +1983,20 @@ int b53_fdb_dump(struct dsa_switch *ds, int port,
 	struct b53_device *priv = ds->priv;
 	struct b53_arl_entry results[2];
 	unsigned int count = 0;
+	u8 offset;
 	int ret;
 	u8 reg;
 
 	mutex_lock(&priv->arl_mutex);
 
+	if (is5325(priv) || is5365(priv))
+		offset = B53_ARL_SRCH_CTL_25;
+	else
+		offset = B53_ARL_SRCH_CTL;
+
 	/* Start search operation */
 	reg = ARL_SRCH_STDN;
-	b53_write8(priv, B53_ARLIO_PAGE, B53_ARL_SRCH_CTL, reg);
+	b53_write8(priv, offset, B53_ARL_SRCH_CTL, reg);
 
 	do {
 		ret = b53_arl_search_wait(priv);
diff --git a/drivers/net/dsa/b53/b53_priv.h b/drivers/net/dsa/b53/b53_priv.h
index e8689410b5d0..b1b9e8882ba4 100644
--- a/drivers/net/dsa/b53/b53_priv.h
+++ b/drivers/net/dsa/b53/b53_priv.h
@@ -317,6 +317,19 @@ static inline void b53_arl_to_entry(struct b53_arl_entry *ent,
 	ent->vid = mac_vid >> ARLTBL_VID_S;
 }
 
+static inline void b53_arl_to_entry_25(struct b53_arl_entry *ent,
+				       u64 mac_vid)
+{
+	memset(ent, 0, sizeof(*ent));
+	ent->port = (mac_vid >> ARLTBL_DATA_PORT_ID_S_25) &
+		     ARLTBL_DATA_PORT_ID_MASK_25;
+	ent->is_valid = !!(mac_vid & ARLTBL_VALID_25);
+	ent->is_age = !!(mac_vid & ARLTBL_AGE_25);
+	ent->is_static = !!(mac_vid & ARLTBL_STATIC_25);
+	u64_to_ether_addr(mac_vid, ent->mac);
+	ent->vid = mac_vid >> ARLTBL_VID_S_65;
+}
+
 static inline void b53_arl_from_entry(u64 *mac_vid, u32 *fwd_entry,
 				      const struct b53_arl_entry *ent)
 {
@@ -331,6 +344,22 @@ static inline void b53_arl_from_entry(u64 *mac_vid, u32 *fwd_entry,
 		*fwd_entry |= ARLTBL_AGE;
 }
 
+static inline void b53_arl_from_entry_25(u64 *mac_vid,
+					 const struct b53_arl_entry *ent)
+{
+	*mac_vid = ether_addr_to_u64(ent->mac);
+	*mac_vid |= (u64)(ent->port & ARLTBL_DATA_PORT_ID_MASK_25) <<
+			  ARLTBL_DATA_PORT_ID_S_25;
+	*mac_vid |= (u64)(ent->vid & ARLTBL_VID_MASK_25) <<
+			  ARLTBL_VID_S_65;
+	if (ent->is_valid)
+		*mac_vid |= ARLTBL_VALID_25;
+	if (ent->is_static)
+		*mac_vid |= ARLTBL_STATIC_25;
+	if (ent->is_age)
+		*mac_vid |= ARLTBL_AGE_25;
+}
+
 #ifdef CONFIG_BCM47XX
 
 #include <linux/bcm47xx_nvram.h>
diff --git a/drivers/net/dsa/b53/b53_regs.h b/drivers/net/dsa/b53/b53_regs.h
index 1fbc5a204bc7..1f15332fb2a7 100644
--- a/drivers/net/dsa/b53/b53_regs.h
+++ b/drivers/net/dsa/b53/b53_regs.h
@@ -324,9 +324,10 @@
 #define   ARLTBL_VID_MASK		0xfff
 #define   ARLTBL_DATA_PORT_ID_S_25	48
 #define   ARLTBL_DATA_PORT_ID_MASK_25	0xf
-#define   ARLTBL_AGE_25			BIT(61)
-#define   ARLTBL_STATIC_25		BIT(62)
-#define   ARLTBL_VALID_25		BIT(63)
+#define   ARLTBL_VID_S_65		53
+#define   ARLTBL_AGE_25			BIT_ULL(61)
+#define   ARLTBL_STATIC_25		BIT_ULL(62)
+#define   ARLTBL_VALID_25		BIT_ULL(63)
 
 /* ARL Table Data Entry N Registers (32 bit) */
 #define B53_ARLTBL_DATA_ENTRY(n)	((0x10 * (n)) + 0x18)
-- 
2.39.5

[PATCH net-next v4 06/14] net: dsa: b53: prevent FAST_AGE access on BCM5325

[Álvaro Fernández Rojas]

BCM5325 doesn't implement FAST_AGE registers so we should avoid reading or
writing them.

Fixes: 967dd82ffc52 ("net: dsa: b53: Add support for Broadcom RoboSwitch")
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
 drivers/net/dsa/b53/b53_common.c | 9 +++++++++
 1 file changed, 9 insertions(+)

 v4: no changes

 v3: no changes

 v2: no changes

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 033cd78577f7..e4e71d193b39 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -487,6 +487,9 @@ static int b53_flush_arl(struct b53_device *dev, u8 mask)
 {
 	unsigned int i;
 
+	if (is5325(dev))
+		return 0;
+
 	b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL,
 		   FAST_AGE_DONE | FAST_AGE_DYNAMIC | mask);
 
@@ -511,6 +514,9 @@ static int b53_flush_arl(struct b53_device *dev, u8 mask)
 
 static int b53_fast_age_port(struct b53_device *dev, int port)
 {
+	if (is5325(dev))
+		return 0;
+
 	b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_PORT_CTRL, port);
 
 	return b53_flush_arl(dev, FAST_AGE_PORT);
@@ -518,6 +524,9 @@ static int b53_fast_age_port(struct b53_device *dev, int port)
 
 static int b53_fast_age_vlan(struct b53_device *dev, u16 vid)
 {
+	if (is5325(dev))
+		return 0;
+
 	b53_write16(dev, B53_CTRL_PAGE, B53_FAST_AGE_VID_CTRL, vid);
 
 	return b53_flush_arl(dev, FAST_AGE_VLAN);
-- 
2.39.5

[PATCH net-next v4 07/14] net: dsa: b53: prevent SWITCH_CTRL access on BCM5325

[Álvaro Fernández Rojas]

BCM5325 doesn't implement SWITCH_CTRL register so we should avoid reading
or writing it.

Fixes: a424f0de6163 ("net: dsa: b53: Include IMP/CPU port in dumb forwarding mode")
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
 drivers/net/dsa/b53/b53_common.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

 v4: no changes

 v3: no changes

 v2: no changes

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index e4e71d193b39..24a9a0372122 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -361,11 +361,12 @@ static void b53_set_forwarding(struct b53_device *dev, int enable)
 
 	b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt);
 
-	/* Include IMP port in dumb forwarding mode
-	 */
-	b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, &mgmt);
-	mgmt |= B53_MII_DUMB_FWDG_EN;
-	b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, mgmt);
+	if (!is5325(dev)) {
+		/* Include IMP port in dumb forwarding mode */
+		b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, &mgmt);
+		mgmt |= B53_MII_DUMB_FWDG_EN;
+		b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, mgmt);
+	}
 
 	/* Look at B53_UC_FWD_EN and B53_MC_FWD_EN to decide whether
 	 * frames should be flooded or not.
-- 
2.39.5

[PATCH net-next v4 08/14] net: dsa: b53: fix IP_MULTICAST_CTRL on BCM5325

[Álvaro Fernández Rojas]

BCM5325 doesn't implement B53_UC_FWD_EN, B53_MC_FWD_EN or B53_IPMC_FWD_EN.

Fixes: 53568438e381 ("net: dsa: b53: Add support for port_egress_floods callback")
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
 drivers/net/dsa/b53/b53_common.c | 18 +++++++++++-------
 drivers/net/dsa/b53/b53_regs.h   |  1 +
 2 files changed, 12 insertions(+), 7 deletions(-)

 v4: no changes

 v3: no changes

 v2: add changes proposed by Jonas:
  - Change function flow.

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 24a9a0372122..c7c950127448 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -366,14 +366,18 @@ static void b53_set_forwarding(struct b53_device *dev, int enable)
 		b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, &mgmt);
 		mgmt |= B53_MII_DUMB_FWDG_EN;
 		b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, mgmt);
-	}
 
-	/* Look at B53_UC_FWD_EN and B53_MC_FWD_EN to decide whether
-	 * frames should be flooded or not.
-	 */
-	b53_read8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, &mgmt);
-	mgmt |= B53_UC_FWD_EN | B53_MC_FWD_EN | B53_IPMC_FWD_EN;
-	b53_write8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, mgmt);
+		/* Look at B53_UC_FWD_EN and B53_MC_FWD_EN to decide whether
+		 * frames should be flooded or not.
+		 */
+		b53_read8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, &mgmt);
+		mgmt |= B53_UC_FWD_EN | B53_MC_FWD_EN | B53_IPMC_FWD_EN;
+		b53_write8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, mgmt);
+	} else {
+		b53_read8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, &mgmt);
+		mgmt |= B53_IP_MCAST_25;
+		b53_write8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, mgmt);
+	}
 }
 
 static void b53_enable_vlan(struct b53_device *dev, int port, bool enable,
diff --git a/drivers/net/dsa/b53/b53_regs.h b/drivers/net/dsa/b53/b53_regs.h
index 1f15332fb2a7..896684d7f594 100644
--- a/drivers/net/dsa/b53/b53_regs.h
+++ b/drivers/net/dsa/b53/b53_regs.h
@@ -106,6 +106,7 @@
 
 /* IP Multicast control (8 bit) */
 #define B53_IP_MULTICAST_CTRL		0x21
+#define  B53_IP_MCAST_25		BIT(0)
 #define  B53_IPMC_FWD_EN		BIT(1)
 #define  B53_UC_FWD_EN			BIT(6)
 #define  B53_MC_FWD_EN			BIT(7)
-- 
2.39.5

[PATCH net-next v4 09/14] net: dsa: b53: prevent DIS_LEARNING access on BCM5325

[Álvaro Fernández Rojas]

BCM5325 doesn't implement DIS_LEARNING register so we should avoid reading
or writing it.

Fixes: f9b3827ee66c ("net: dsa: b53: Support setting learning on port")
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
 drivers/net/dsa/b53/b53_common.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

 v4: no changes

 v3: no changes

 v2: add changes proposed by Vladimir:
  - Disallow BR_LEARNING on b53_br_flags_pre() for BCM5325.

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index c7c950127448..daf7c1906711 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -593,6 +593,9 @@ static void b53_port_set_learning(struct b53_device *dev, int port,
 {
 	u16 reg;
 
+	if (is5325(dev))
+		return;
+
 	b53_read16(dev, B53_CTRL_PAGE, B53_DIS_LEARNING, &reg);
 	if (learning)
 		reg &= ~BIT(port);
@@ -2243,7 +2246,13 @@ int b53_br_flags_pre(struct dsa_switch *ds, int port,
 		     struct switchdev_brport_flags flags,
 		     struct netlink_ext_ack *extack)
 {
-	if (flags.mask & ~(BR_FLOOD | BR_MCAST_FLOOD | BR_LEARNING))
+	struct b53_device *dev = ds->priv;
+	unsigned long mask = (BR_FLOOD | BR_MCAST_FLOOD);
+
+	if (!is5325(dev))
+		mask |= BR_LEARNING;
+
+	if (flags.mask & ~mask)
 		return -EINVAL;
 
 	return 0;
-- 
2.39.5

[PATCH net-next v4 10/14] net: dsa: b53: prevent BRCM_HDR access on older devices

[Álvaro Fernández Rojas]

Older switches don't implement BRCM_HDR register so we should avoid
reading or writing it.

Fixes: b409a9efa183 ("net: dsa: b53: Move Broadcom header setup to b53")
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
 drivers/net/dsa/b53/b53_common.c | 5 +++++
 1 file changed, 5 insertions(+)

 v4: no changes

 v3: add changes requested by Jonas:
  - Check for legacy tag protocols instead of is5325().

 v2: no changes

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index daf7c1906711..2bcbb003b1fd 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -730,6 +730,11 @@ void b53_brcm_hdr_setup(struct dsa_switch *ds, int port)
 		hdr_ctl |= GC_FRM_MGMT_PORT_M;
 	b53_write8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, hdr_ctl);
 
+	/* B53_BRCM_HDR not present on devices with legacy tags */
+	if (dev->tag_protocol == DSA_TAG_PROTO_BRCM_LEGACY ||
+	    dev->tag_protocol == DSA_TAG_PROTO_BRCM_LEGACY_FCS)
+		return;
+
 	/* Enable Broadcom tags for IMP port */
 	b53_read8(dev, B53_MGMT_PAGE, B53_BRCM_HDR, &hdr_ctl);
 	if (tag_en)
-- 
2.39.5

[PATCH net-next v4 11/14] net: dsa: b53: prevent GMII_PORT_OVERRIDE_CTRL access on BCM5325

[Álvaro Fernández Rojas]

BCM5325 doesn't implement GMII_PORT_OVERRIDE_CTRL register so we should
avoid reading or writing it.
PORT_OVERRIDE_RX_FLOW and PORT_OVERRIDE_TX_FLOW aren't defined on BCM5325
and we should use PORT_OVERRIDE_LP_FLOW_25 instead.

Fixes: 5e004460f874 ("net: dsa: b53: Add helper to set link parameters")
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
 drivers/net/dsa/b53/b53_common.c | 21 +++++++++++++++++----
 drivers/net/dsa/b53/b53_regs.h   |  1 +
 2 files changed, 18 insertions(+), 4 deletions(-)

 v4: no changes

 v3: no changes

 v2: no changes

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 2bcbb003b1fd..034e36b351c9 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -1279,6 +1279,8 @@ static void b53_force_link(struct b53_device *dev, int port, int link)
 	if (port == dev->imp_port) {
 		off = B53_PORT_OVERRIDE_CTRL;
 		val = PORT_OVERRIDE_EN;
+	} else if (is5325(dev)) {
+		return;
 	} else {
 		off = B53_GMII_PORT_OVERRIDE_CTRL(port);
 		val = GMII_PO_EN;
@@ -1303,6 +1305,8 @@ static void b53_force_port_config(struct b53_device *dev, int port,
 	if (port == dev->imp_port) {
 		off = B53_PORT_OVERRIDE_CTRL;
 		val = PORT_OVERRIDE_EN;
+	} else if (is5325(dev)) {
+		return;
 	} else {
 		off = B53_GMII_PORT_OVERRIDE_CTRL(port);
 		val = GMII_PO_EN;
@@ -1333,10 +1337,19 @@ static void b53_force_port_config(struct b53_device *dev, int port,
 		return;
 	}
 
-	if (rx_pause)
-		reg |= PORT_OVERRIDE_RX_FLOW;
-	if (tx_pause)
-		reg |= PORT_OVERRIDE_TX_FLOW;
+	if (rx_pause) {
+		if (is5325(dev))
+			reg |= PORT_OVERRIDE_LP_FLOW_25;
+		else
+			reg |= PORT_OVERRIDE_RX_FLOW;
+	}
+
+	if (tx_pause) {
+		if (is5325(dev))
+			reg |= PORT_OVERRIDE_LP_FLOW_25;
+		else
+			reg |= PORT_OVERRIDE_TX_FLOW;
+	}
 
 	b53_write8(dev, B53_CTRL_PAGE, off, reg);
 }
diff --git a/drivers/net/dsa/b53/b53_regs.h b/drivers/net/dsa/b53/b53_regs.h
index 896684d7f594..ab15f36a135a 100644
--- a/drivers/net/dsa/b53/b53_regs.h
+++ b/drivers/net/dsa/b53/b53_regs.h
@@ -95,6 +95,7 @@
 #define   PORT_OVERRIDE_SPEED_10M	(0 << PORT_OVERRIDE_SPEED_S)
 #define   PORT_OVERRIDE_SPEED_100M	(1 << PORT_OVERRIDE_SPEED_S)
 #define   PORT_OVERRIDE_SPEED_1000M	(2 << PORT_OVERRIDE_SPEED_S)
+#define   PORT_OVERRIDE_LP_FLOW_25	BIT(3) /* BCM5325 only */
 #define   PORT_OVERRIDE_RV_MII_25	BIT(4) /* BCM5325 only */
 #define   PORT_OVERRIDE_RX_FLOW		BIT(4)
 #define   PORT_OVERRIDE_TX_FLOW		BIT(5)
-- 
2.39.5

[PATCH net-next v4 12/14] net: dsa: b53: fix unicast/multicast flooding on BCM5325

[Álvaro Fernández Rojas]

BCM5325 doesn't implement UC_FLOOD_MASK, MC_FLOOD_MASK and IPMC_FLOOD_MASK
registers.
This has to be handled differently with other pages and registers.

Fixes: a8b659e7ff75 ("net: dsa: act as passthrough for bridge port flags")
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
 drivers/net/dsa/b53/b53_common.c | 60 ++++++++++++++++++++++----------
 drivers/net/dsa/b53/b53_regs.h   | 13 +++++++
 2 files changed, 55 insertions(+), 18 deletions(-)

 v4: no changes

 v3: no changes

 v2: add changes proposed by Jonas:
  - Drop rate control registers.

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 034e36b351c9..6aaa81af5367 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -560,12 +560,24 @@ static void b53_port_set_ucast_flood(struct b53_device *dev, int port,
 {
 	u16 uc;
 
-	b53_read16(dev, B53_CTRL_PAGE, B53_UC_FLOOD_MASK, &uc);
-	if (unicast)
-		uc |= BIT(port);
-	else
-		uc &= ~BIT(port);
-	b53_write16(dev, B53_CTRL_PAGE, B53_UC_FLOOD_MASK, uc);
+	if (is5325(dev)) {
+		if (port == B53_CPU_PORT_25)
+			port = B53_CPU_PORT;
+
+		b53_read16(dev, B53_IEEE_PAGE, B53_IEEE_UCAST_DLF, &uc);
+		if (unicast)
+			uc |= BIT(port) | B53_IEEE_UCAST_DROP_EN;
+		else
+			uc &= ~BIT(port);
+		b53_write16(dev, B53_IEEE_PAGE, B53_IEEE_UCAST_DLF, uc);
+	} else {
+		b53_read16(dev, B53_CTRL_PAGE, B53_UC_FLOOD_MASK, &uc);
+		if (unicast)
+			uc |= BIT(port);
+		else
+			uc &= ~BIT(port);
+		b53_write16(dev, B53_CTRL_PAGE, B53_UC_FLOOD_MASK, uc);
+	}
 }
 
 static void b53_port_set_mcast_flood(struct b53_device *dev, int port,
@@ -573,19 +585,31 @@ static void b53_port_set_mcast_flood(struct b53_device *dev, int port,
 {
 	u16 mc;
 
-	b53_read16(dev, B53_CTRL_PAGE, B53_MC_FLOOD_MASK, &mc);
-	if (multicast)
-		mc |= BIT(port);
-	else
-		mc &= ~BIT(port);
-	b53_write16(dev, B53_CTRL_PAGE, B53_MC_FLOOD_MASK, mc);
+	if (is5325(dev)) {
+		if (port == B53_CPU_PORT_25)
+			port = B53_CPU_PORT;
 
-	b53_read16(dev, B53_CTRL_PAGE, B53_IPMC_FLOOD_MASK, &mc);
-	if (multicast)
-		mc |= BIT(port);
-	else
-		mc &= ~BIT(port);
-	b53_write16(dev, B53_CTRL_PAGE, B53_IPMC_FLOOD_MASK, mc);
+		b53_read16(dev, B53_IEEE_PAGE, B53_IEEE_MCAST_DLF, &mc);
+		if (multicast)
+			mc |= BIT(port) | B53_IEEE_MCAST_DROP_EN;
+		else
+			mc &= ~BIT(port);
+		b53_write16(dev, B53_IEEE_PAGE, B53_IEEE_MCAST_DLF, mc);
+	} else {
+		b53_read16(dev, B53_CTRL_PAGE, B53_MC_FLOOD_MASK, &mc);
+		if (multicast)
+			mc |= BIT(port);
+		else
+			mc &= ~BIT(port);
+		b53_write16(dev, B53_CTRL_PAGE, B53_MC_FLOOD_MASK, mc);
+
+		b53_read16(dev, B53_CTRL_PAGE, B53_IPMC_FLOOD_MASK, &mc);
+		if (multicast)
+			mc |= BIT(port);
+		else
+			mc &= ~BIT(port);
+		b53_write16(dev, B53_CTRL_PAGE, B53_IPMC_FLOOD_MASK, mc);
+	}
 }
 
 static void b53_port_set_learning(struct b53_device *dev, int port,
diff --git a/drivers/net/dsa/b53/b53_regs.h b/drivers/net/dsa/b53/b53_regs.h
index ab15f36a135a..d6849cf6b0a3 100644
--- a/drivers/net/dsa/b53/b53_regs.h
+++ b/drivers/net/dsa/b53/b53_regs.h
@@ -29,6 +29,7 @@
 #define B53_ARLIO_PAGE			0x05 /* ARL Access */
 #define B53_FRAMEBUF_PAGE		0x06 /* Management frame access */
 #define B53_MEM_ACCESS_PAGE		0x08 /* Memory access */
+#define B53_IEEE_PAGE			0x0a /* IEEE 802.1X */
 
 /* PHY Registers */
 #define B53_PORT_MII_PAGE(i)		(0x10 + (i)) /* Port i MII Registers */
@@ -368,6 +369,18 @@
 #define B53_ARL_SRCH_RSTL_MACVID(x)	(B53_ARL_SRCH_RSTL_0_MACVID + ((x) * 0x10))
 #define B53_ARL_SRCH_RSTL(x)		(B53_ARL_SRCH_RSTL_0 + ((x) * 0x10))
 
+/*************************************************************************
+ * IEEE 802.1X Registers
+ *************************************************************************/
+
+/* Multicast DLF Drop Control register (16 bit) */
+#define B53_IEEE_MCAST_DLF		0x94
+#define B53_IEEE_MCAST_DROP_EN		BIT(11)
+
+/* Unicast DLF Drop Control register (16 bit) */
+#define B53_IEEE_UCAST_DLF		0x96
+#define B53_IEEE_UCAST_DROP_EN		BIT(11)
+
 /*************************************************************************
  * Port VLAN Registers
  *************************************************************************/
-- 
2.39.5

[PATCH net-next v4 13/14] net: dsa: b53: fix b53_imp_vlan_setup for BCM5325

[Álvaro Fernández Rojas]

CPU port should be B53_CPU_PORT instead of B53_CPU_PORT_25 for
B53_PVLAN_PORT_MASK register.

Fixes: ff39c2d68679 ("net: dsa: b53: Add bridge support")
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
 drivers/net/dsa/b53/b53_common.c | 4 ++++
 1 file changed, 4 insertions(+)

 v4: no changes

 v3: no changes

 v2: no changes

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 6aaa81af5367..29f207a69b9c 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -543,6 +543,10 @@ void b53_imp_vlan_setup(struct dsa_switch *ds, int cpu_port)
 	unsigned int i;
 	u16 pvlan;
 
+	/* BCM5325 CPU port is at 8 */
+	if ((is5325(dev) || is5365(dev)) && cpu_port == B53_CPU_PORT_25)
+		cpu_port = B53_CPU_PORT;
+
 	/* Enable the IMP port to be in the same VLAN as the other ports
 	 * on a per-port basis such that we only have Port i and IMP in
 	 * the same VLAN.
-- 
2.39.5

[PATCH net-next v4 14/14] net: dsa: b53: ensure BCM5325 PHYs are enabled

[Álvaro Fernández Rojas]

According to the datasheet, BCM5325 uses B53_PD_MODE_CTRL_25 register to
disable clocking to individual PHYs.
Only ports 1-4 can be enabled or disabled and the datasheet is explicit
about not toggling BIT(0) since it disables the PLL power and the switch.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
 drivers/net/dsa/b53/b53_common.c | 13 +++++++++++++
 drivers/net/dsa/b53/b53_regs.h   |  5 ++++-
 2 files changed, 17 insertions(+), 1 deletion(-)

 v4: add changes requested by Jonas:
  - Avoid in_range() confusion.
  - Ensure PD_MODE_POWER_DOWN_PORT(0) is cleared.
  - Improve B53_PD_MODE_CTRL_25 register defines.

 v3: add changes requested by Florian:
  - Use in_range() helper.

 v2: add changes requested by Florian:
  - Move B53_PD_MODE_CTRL_25 to b53_setup_port().

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 29f207a69b9c..46978757c972 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -660,6 +660,19 @@ int b53_setup_port(struct dsa_switch *ds, int port)
 	if (dsa_is_user_port(ds, port))
 		b53_set_eap_mode(dev, port, EAP_MODE_SIMPLIFIED);
 
+	if (is5325(dev) &&
+	    in_range(port, 1, 4)) {
+		u8 reg;
+
+		b53_read8(dev, B53_CTRL_PAGE, B53_PD_MODE_CTRL_25, &reg);
+		reg &= ~PD_MODE_POWER_DOWN_PORT(0);
+		if (dsa_is_unused_port(ds, port))
+			reg |= PD_MODE_POWER_DOWN_PORT(port);
+		else
+			reg &= ~PD_MODE_POWER_DOWN_PORT(port);
+		b53_write8(dev, B53_CTRL_PAGE, B53_PD_MODE_CTRL_25, reg);
+	}
+
 	return 0;
 }
 EXPORT_SYMBOL(b53_setup_port);
diff --git a/drivers/net/dsa/b53/b53_regs.h b/drivers/net/dsa/b53/b53_regs.h
index d6849cf6b0a3..309fe0e46dad 100644
--- a/drivers/net/dsa/b53/b53_regs.h
+++ b/drivers/net/dsa/b53/b53_regs.h
@@ -103,8 +103,11 @@
 #define   PORT_OVERRIDE_SPEED_2000M	BIT(6) /* BCM5301X only, requires setting 1000M */
 #define   PORT_OVERRIDE_EN		BIT(7) /* Use the register contents */
 
-/* Power-down mode control */
+/* Power-down mode control (8 bit) */
 #define B53_PD_MODE_CTRL_25		0x0f
+#define  PD_MODE_PORT_MASK		0x1f
+/* Bit 0 also powers down the switch. */
+#define  PD_MODE_POWER_DOWN_PORT(i)	BIT(i)
 
 /* IP Multicast control (8 bit) */
 #define B53_IP_MULTICAST_CTRL		0x21
-- 
2.39.5

Re: [PATCH net-next v4 02/14] net: dsa: tag_brcm: add support for legacy FCS tags

[Florian Fainelli]

On 6/14/25 00:59, Álvaro Fernández Rojas wrote:
> Add support for legacy Broadcom FCS tags, which are similar to
> DSA_TAG_PROTO_BRCM_LEGACY.
> BCM5325 and BCM5365 switches require including the original FCS value and
> length, as opposed to BCM63xx switches.
> Adding the original FCS value and length to DSA_TAG_PROTO_BRCM_LEGACY would
> impact performance of BCM63xx switches, so it's better to create a new tag.
> 
> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
-- 
Florian

Re: [PATCH net-next v4 04/14] net: dsa: b53: detect BCM5325 variants

[Florian Fainelli]

On 6/14/25 00:59, Álvaro Fernández Rojas wrote:
> We need to be able to differentiate the BCM5325 variants because:
> - BCM5325M switches lack the ARLIO_PAGE->VLAN_ID_IDX register.
> - BCM5325E have less 512 ARL buckets instead of 1024.
> 
> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
-- 
Florian

Re: [PATCH net-next v4 06/14] net: dsa: b53: prevent FAST_AGE access on BCM5325

[Florian Fainelli]

On 6/14/25 00:59, Álvaro Fernández Rojas wrote:
> BCM5325 doesn't implement FAST_AGE registers so we should avoid reading or
> writing them.
> 
> Fixes: 967dd82ffc52 ("net: dsa: b53: Add support for Broadcom RoboSwitch")
> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
-- 
Florian

Re: [PATCH net-next v4 14/14] net: dsa: b53: ensure BCM5325 PHYs are enabled

[Florian Fainelli]

On 6/14/25 01:00, Álvaro Fernández Rojas wrote:
> According to the datasheet, BCM5325 uses B53_PD_MODE_CTRL_25 register to
> disable clocking to individual PHYs.
> Only ports 1-4 can be enabled or disabled and the datasheet is explicit
> about not toggling BIT(0) since it disables the PLL power and the switch.
> 
> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
-- 
Florian

Re: [PATCH net-next v4 12/14] net: dsa: b53: fix unicast/multicast flooding on BCM5325

[Florian Fainelli]

On 6/14/25 00:59, Álvaro Fernández Rojas wrote:
> BCM5325 doesn't implement UC_FLOOD_MASK, MC_FLOOD_MASK and IPMC_FLOOD_MASK
> registers.
> This has to be handled differently with other pages and registers.
> 
> Fixes: a8b659e7ff75 ("net: dsa: act as passthrough for bridge port flags")
> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
-- 
Florian

Re: [PATCH net-next v4 00/14] net: dsa: b53: fix BCM5325 support

[Jakub Kicinski]

On Sat, 14 Jun 2025 09:59:46 +0200 Álvaro Fernández Rojas wrote:
> These patches get the BCM5325 switch working with b53.
> 
> The existing brcm legacy tag only works with BCM63xx switches.
> We need to add a new legacy tag for BCM5325 and BCM5365 switches, which
> require including the FCS and length.
> 
> I'm not really sure that everything here is correct since I don't work for
> Broadcom and all this is based on the public datasheet available for the
> BCM5325 and my own experiments with a Huawei HG556a (BCM6358).
> 
> Both sets of patches have been merged due to the change requested by Jonas
> about BRCM_HDR register access depending on legacy tags.

From the commit messages sounds like the support for these switches
never really worked properly. So I'll drop the Fixes tag when applying.
No objection if you'd like to argue with stable folks for stable
inclusion once these reach Linus, given what lands in stable these days.
But I don't want to implicitly support that by applying with the Fixes
tags.

Re: [PATCH net-next v4 00/14] net: dsa: b53: fix BCM5325 support

[patchwork-bot+netdevbpf]

Hello:

This series was applied to netdev/net-next.git (main)
by Jakub Kicinski <kuba@kernel.org>:

On Sat, 14 Jun 2025 09:59:46 +0200 you wrote:
> These patches get the BCM5325 switch working with b53.
> 
> The existing brcm legacy tag only works with BCM63xx switches.
> We need to add a new legacy tag for BCM5325 and BCM5365 switches, which
> require including the FCS and length.
> 
> I'm not really sure that everything here is correct since I don't work for
> Broadcom and all this is based on the public datasheet available for the
> BCM5325 and my own experiments with a Huawei HG556a (BCM6358).
> 
> [...]

Here is the summary with links:
  - [net-next,v4,01/14] net: dsa: tag_brcm: legacy: reorganize functions
    https://git.kernel.org/netdev/net-next/c/a4daaf063f82
  - [net-next,v4,02/14] net: dsa: tag_brcm: add support for legacy FCS tags
    https://git.kernel.org/netdev/net-next/c/ef07df397a62
  - [net-next,v4,03/14] net: dsa: b53: support legacy FCS tags
    https://git.kernel.org/netdev/net-next/c/c3cf059a4d41
  - [net-next,v4,04/14] net: dsa: b53: detect BCM5325 variants
    https://git.kernel.org/netdev/net-next/c/0cbec9aef5a8
  - [net-next,v4,05/14] net: dsa: b53: add support for FDB operations on 5325/5365
    https://git.kernel.org/netdev/net-next/c/c45655386e53
  - [net-next,v4,06/14] net: dsa: b53: prevent FAST_AGE access on BCM5325
    https://git.kernel.org/netdev/net-next/c/9b6c767c312b
  - [net-next,v4,07/14] net: dsa: b53: prevent SWITCH_CTRL access on BCM5325
    https://git.kernel.org/netdev/net-next/c/22ccaaca4344
  - [net-next,v4,08/14] net: dsa: b53: fix IP_MULTICAST_CTRL on BCM5325
    https://git.kernel.org/netdev/net-next/c/044d5ce2788b
  - [net-next,v4,09/14] net: dsa: b53: prevent DIS_LEARNING access on BCM5325
    https://git.kernel.org/netdev/net-next/c/800728abd9f8
  - [net-next,v4,10/14] net: dsa: b53: prevent BRCM_HDR access on older devices
    https://git.kernel.org/netdev/net-next/c/e17813968b08
  - [net-next,v4,11/14] net: dsa: b53: prevent GMII_PORT_OVERRIDE_CTRL access on BCM5325
    https://git.kernel.org/netdev/net-next/c/37883bbc45a8
  - [net-next,v4,12/14] net: dsa: b53: fix unicast/multicast flooding on BCM5325
    https://git.kernel.org/netdev/net-next/c/651c9e71ffe4
  - [net-next,v4,13/14] net: dsa: b53: fix b53_imp_vlan_setup for BCM5325
    https://git.kernel.org/netdev/net-next/c/c00df1018791
  - [net-next,v4,14/14] net: dsa: b53: ensure BCM5325 PHYs are enabled
    https://git.kernel.org/netdev/net-next/c/966a83df36c6

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html