[PATCH V2 net-next 4/8] net: hns3: add \n at the end when print msg

[Jijie Shao <shaojijie@huawei.com>]

From: Peiyang Wang <wangpeiyang1@huawei.com>

To make the print message more clearly, add \n at the and of message if
it is missing currently.

Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
---
 drivers/net/ethernet/hisilicon/hns3/hns3_enet.c        |  2 +-
 drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c     | 10 +++++-----
 .../net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c    |  2 +-
 .../net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c  |  2 +-
 4 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index 208a2dfc07ec..dc1e15926482 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -2447,7 +2447,7 @@ static int hns3_nic_set_features(struct net_device *netdev,
 	if ((netdev->features & NETIF_F_HW_TC) > (features & NETIF_F_HW_TC) &&
 	    h->ae_algo->ops->cls_flower_active(h)) {
 		netdev_err(netdev,
-			   "there are offloaded TC filters active, cannot disable HW TC offload");
+			   "there are offloaded TC filters active, cannot disable HW TC offload\n");
 		return -EINVAL;
 	}
 
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
index 5e01dd55d660..6a244ba5e051 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
@@ -436,7 +436,7 @@ static void hns3_self_test(struct net_device *ndev,
 		data[i] = HNS3_NIC_LB_TEST_UNEXECUTED;
 
 	if (hns3_nic_resetting(ndev)) {
-		netdev_err(ndev, "dev resetting!");
+		netdev_err(ndev, "dev resetting!\n");
 		goto failure;
 	}
 
@@ -794,7 +794,7 @@ static int hns3_get_link_ksettings(struct net_device *netdev,
 		break;
 	default:
 
-		netdev_warn(netdev, "Unknown media type");
+		netdev_warn(netdev, "Unknown media type\n");
 		return 0;
 	}
 
@@ -842,7 +842,7 @@ static int hns3_check_ksettings_param(const struct net_device *netdev,
 	if (cmd->base.duplex == DUPLEX_HALF &&
 	    media_type != HNAE3_MEDIA_TYPE_COPPER) {
 		netdev_err(netdev,
-			   "only copper port supports half duplex!");
+			   "only copper port supports half duplex!\n");
 		return -EINVAL;
 	}
 
@@ -1308,7 +1308,7 @@ static int hns3_nway_reset(struct net_device *netdev)
 		return 0;
 
 	if (hns3_nic_resetting(netdev)) {
-		netdev_err(netdev, "dev resetting!");
+		netdev_err(netdev, "dev resetting!\n");
 		return -EBUSY;
 	}
 
@@ -1924,7 +1924,7 @@ static int hns3_set_tunable(struct net_device *netdev,
 	int i, ret = 0;
 
 	if (hns3_nic_resetting(netdev) || !priv->ring) {
-		netdev_err(netdev, "failed to set tunable value, dev resetting!");
+		netdev_err(netdev, "failed to set tunable value, dev resetting!\n");
 		return -EBUSY;
 	}
 
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index a5b480d59fbf..e0a2ca21ee46 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -11423,7 +11423,7 @@ static int hclge_pci_init(struct hclge_dev *hdev)
 		ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
 		if (ret) {
 			dev_err(&pdev->dev,
-				"can't set consistent PCI DMA");
+				"can't set consistent PCI DMA\n");
 			goto err_disable_device;
 		}
 		dev_warn(&pdev->dev, "set DMA mask to 32 bits\n");
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
index c4f35e8e2177..e3f86638540b 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
@@ -2625,7 +2625,7 @@ static int hclgevf_pci_init(struct hclgevf_dev *hdev)
 
 	ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
 	if (ret) {
-		dev_err(&pdev->dev, "can't set consistent PCI DMA, exiting");
+		dev_err(&pdev->dev, "can't set consistent PCI DMA, exiting\n");
 		goto err_disable_device;
 	}
 
-- 
2.33.0