The Linux Kernel Mailing List
 help / color / mirror / Atom feed
From: "Peter Chen (CIX)" <peter.chen@kernel.org>
To: Pawel Laszczak <pawell@cadence.com>
Cc: "gregkh@linuxfoundation.org" <gregkh@linuxfoundation.org>,
	"linux-usb@vger.kernel.org" <linux-usb@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"stable@vger.kernel.org" <stable@vger.kernel.org>
Subject: Re: [PATCH] usb: cdnsp: Fix issue with CV Bad Descriptor test
Date: Tue, 17 Jun 2025 16:33:35 +0800	[thread overview]
Message-ID: <20250617083335.GC1716298@nchen-desktop> (raw)
In-Reply-To: <PH7PR07MB95388A30AE3E50D42E0592CADD73A@PH7PR07MB9538.namprd07.prod.outlook.com>

On 25-06-17 07:15:06, Pawel Laszczak wrote:
> The SSP2 controller has extra endpoint state preserve bit (ESP) which
> setting causes that endpoint state will be preserved during
> Halt Endpoint command. It is used only for EP0.
> Without this bit the Command Verifier "TD 9.10 Bad Descriptor Test"
> failed.
> Setting this bit doesn't have any impact for SSP controller.
> 
> Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
> cc: stable@vger.kernel.org
> Signed-off-by: Pawel Laszczak <pawell@cadence.com>
> ---
>  drivers/usb/cdns3/cdnsp-debug.h  |  5 +++--
>  drivers/usb/cdns3/cdnsp-ep0.c    | 17 ++++++++++++++---
>  drivers/usb/cdns3/cdnsp-gadget.h |  3 +++
>  drivers/usb/cdns3/cdnsp-ring.c   |  3 ++-
>  4 files changed, 22 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/usb/cdns3/cdnsp-debug.h b/drivers/usb/cdns3/cdnsp-debug.h
> index cd138acdcce1..86860686d836 100644
> --- a/drivers/usb/cdns3/cdnsp-debug.h
> +++ b/drivers/usb/cdns3/cdnsp-debug.h
> @@ -327,12 +327,13 @@ static inline const char *cdnsp_decode_trb(char *str, size_t size, u32 field0,
>  	case TRB_RESET_EP:
>  	case TRB_HALT_ENDPOINT:
>  		ret = scnprintf(str, size,
> -				"%s: ep%d%s(%d) ctx %08x%08x slot %ld flags %c",
> +				"%s: ep%d%s(%d) ctx %08x%08x slot %ld flags %c %c",
>  				cdnsp_trb_type_string(type),
>  				ep_num, ep_id % 2 ? "out" : "in",
>  				TRB_TO_EP_INDEX(field3), field1, field0,
>  				TRB_TO_SLOT_ID(field3),
> -				field3 & TRB_CYCLE ? 'C' : 'c');
> +				field3 & TRB_CYCLE ? 'C' : 'c',
> +				field3 & TRB_ESP ? 'P' : 'p');
>  		break;
>  	case TRB_STOP_RING:
>  		ret = scnprintf(str, size,
> diff --git a/drivers/usb/cdns3/cdnsp-ep0.c b/drivers/usb/cdns3/cdnsp-ep0.c
> index f317d3c84781..567ccfdecded 100644
> --- a/drivers/usb/cdns3/cdnsp-ep0.c
> +++ b/drivers/usb/cdns3/cdnsp-ep0.c
> @@ -414,6 +414,7 @@ static int cdnsp_ep0_std_request(struct cdnsp_device *pdev,
>  void cdnsp_setup_analyze(struct cdnsp_device *pdev)
>  {
>  	struct usb_ctrlrequest *ctrl = &pdev->setup;
> +	struct cdnsp_ep *pep;
>  	int ret = -EINVAL;
>  	u16 len;
>  
> @@ -428,9 +429,19 @@ void cdnsp_setup_analyze(struct cdnsp_device *pdev)
>  	}
>  
>  	/* Restore the ep0 to Stopped/Running state. */
> -	if (pdev->eps[0].ep_state & EP_HALTED) {
> -		trace_cdnsp_ep0_halted("Restore to normal state");
> -		cdnsp_halt_endpoint(pdev, &pdev->eps[0], 0);
> +	if (pep->ep_state & EP_HALTED) {
> +		/*
> +		 * Halt Endpoint Command for SSP2 for ep0 preserve current
> +		 * endpoint state and driver has to synchronise the

%s/synchronise/synchronize

> +		 * software endpointp state with endpoint output context

%s/endpointp/endpoint

> +		 * state.
> +		 */
> +		if (GET_EP_CTX_STATE(pep->out_ctx) == EP_STATE_HALTED) {
> +			cdnsp_halt_endpoint(pdev, pep, 0);
> +		} else {
> +			pep->ep_state &= ~EP_HALTED;
> +			pep->ep_state |= EP_STOPPED;
> +		}
>  	}
>  
>  	/*
> diff --git a/drivers/usb/cdns3/cdnsp-gadget.h b/drivers/usb/cdns3/cdnsp-gadget.h
> index 2afa3e558f85..c26abef6e1c9 100644
> --- a/drivers/usb/cdns3/cdnsp-gadget.h
> +++ b/drivers/usb/cdns3/cdnsp-gadget.h
> @@ -987,6 +987,9 @@ enum cdnsp_setup_dev {
>  #define STREAM_ID_FOR_TRB(p)		((((p)) << 16) & GENMASK(31, 16))
>  #define SCT_FOR_TRB(p)			(((p) << 1) & 0x7)
>  
> +/* Halt Endpoint Command TRB field. */
> +#define TRB_ESP				BIT(9)
> +

Please add comment it is specific for SSP2.

Peter

>  /* Link TRB specific fields. */
>  #define TRB_TC				BIT(1)
>  
> diff --git a/drivers/usb/cdns3/cdnsp-ring.c b/drivers/usb/cdns3/cdnsp-ring.c
> index fd06cb85c4ea..d397d28efc6e 100644
> --- a/drivers/usb/cdns3/cdnsp-ring.c
> +++ b/drivers/usb/cdns3/cdnsp-ring.c
> @@ -2483,7 +2483,8 @@ void cdnsp_queue_halt_endpoint(struct cdnsp_device *pdev, unsigned int ep_index)
>  {
>  	cdnsp_queue_command(pdev, 0, 0, 0, TRB_TYPE(TRB_HALT_ENDPOINT) |
>  			    SLOT_ID_FOR_TRB(pdev->slot_id) |
> -			    EP_ID_FOR_TRB(ep_index));
> +			    EP_ID_FOR_TRB(ep_index) |
> +			    (!ep_index ? TRB_ESP : 0));
>  }
>  
>  void cdnsp_force_header_wakeup(struct cdnsp_device *pdev, int intf_num)
> -- 
> 2.43.0
> 

-- 

Best regards,
Peter

  reply	other threads:[~2025-06-17  8:33 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20250617071045.128040-1-pawell@cadence.com>
2025-06-17  7:15 ` [PATCH] usb: cdnsp: Fix issue with CV Bad Descriptor test Pawel Laszczak
2025-06-17  8:33   ` Peter Chen (CIX) [this message]
2025-06-17 23:58   ` kernel test robot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250617083335.GC1716298@nchen-desktop \
    --to=peter.chen@kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=pawell@cadence.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox