[PATCH 0/3] arm64: dts: qcom: sar2130p: correct display controller device

[PATCH 0/3] arm64: dts: qcom: sar2130p: correct display controller device

[Dmitry Baryshkov]

I didn't notice that Bjorn has picked up v1 of the SAR2130P display
patchset instead of v5. Correct several mistakes that were fixed between
those two versions.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
---
Dmitry Baryshkov (3):
      arm64: dts: qcom: sar2130p: use TAG_ALWAYS for MDSS's mdp0-mem path
      arm64: dts: qcom: sar2130p: correct VBIF region size for MDSS
      arm64: dts: qcom: sar2130p: use defines for DSI PHY clocks

 arch/arm64/boot/dts/qcom/sar2130p.dtsi | 23 ++++++++++++-----------
 1 file changed, 12 insertions(+), 11 deletions(-)
---
base-commit: 6e5ab6fee68df8c40b338baeae6e269fa25a7e25
change-id: 20250618-sar2130p-fix-mdss-a14b47f065e3

Best regards,
-- 
With best wishes
Dmitry

[PATCH 1/3] arm64: dts: qcom: sar2130p: use TAG_ALWAYS for MDSS's mdp0-mem path

[Dmitry Baryshkov]

Switch the main memory interconnect of the MDSS device to use
QCOM_ICC_TAG_ALWAYS instead of _ACTIVE_ONLY.

Fixes: 541d0b2f4dcd ("arm64: dts: qcom: sar2130p: add display nodes")
Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/sar2130p.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sar2130p.dtsi b/arch/arm64/boot/dts/qcom/sar2130p.dtsi
index e400ea4cdee8c9f512a8bee4444506fd23d0f0b3..6d7d4f05d502049dd6dc404317412c438b11d081 100644
--- a/arch/arm64/boot/dts/qcom/sar2130p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sar2130p.dtsi
@@ -2036,8 +2036,8 @@ mdss: display-subsystem@ae00000 {
 
 			power-domains = <&dispcc MDSS_GDSC>;
 
-			interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ACTIVE_ONLY
-					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+			interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
 					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
 					 &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
 			interconnect-names = "mdp0-mem", "cpu-cfg";

-- 
2.39.5

[PATCH 2/3] arm64: dts: qcom: sar2130p: correct VBIF region size for MDSS

[Dmitry Baryshkov]

Correct the VBIF region size for the display device on the SAR1230P
platform.

Fixes: 541d0b2f4dcd ("arm64: dts: qcom: sar2130p: add display nodes")
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Closes: https://lore.kernel.org/all/c14dfd37-7d12-40c3-8281-fd0a7410813e@oss.qualcomm.com/
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/sar2130p.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sar2130p.dtsi b/arch/arm64/boot/dts/qcom/sar2130p.dtsi
index 6d7d4f05d502049dd6dc404317412c438b11d081..d9948360cc0198a768598f60302097e1143cf1fc 100644
--- a/arch/arm64/boot/dts/qcom/sar2130p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sar2130p.dtsi
@@ -2053,7 +2053,7 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
 			mdss_mdp: display-controller@ae01000 {
 				compatible = "qcom,sar2130p-dpu";
 				reg = <0x0 0x0ae01000 0x0 0x8f000>,
-				      <0x0 0x0aeb0000 0x0 0x2008>;
+				      <0x0 0x0aeb0000 0x0 0x3000>;
 				reg-names = "mdp",
 					    "vbif";
 

-- 
2.39.5

[PATCH 3/3] arm64: dts: qcom: sar2130p: use defines for DSI PHY clocks

[Dmitry Baryshkov]

Use defined IDs to reference DSI PHY clocks instead of using raw
numbers.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/sar2130p.dtsi | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sar2130p.dtsi b/arch/arm64/boot/dts/qcom/sar2130p.dtsi
index d9948360cc0198a768598f60302097e1143cf1fc..38f7869616ff01ece3799ced15c39375d629e364 100644
--- a/arch/arm64/boot/dts/qcom/sar2130p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sar2130p.dtsi
@@ -3,6 +3,7 @@
  * Copyright (c) 2024, Linaro Limited
  */
 
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,sar2130p-gcc.h>
 #include <dt-bindings/clock/qcom,sar2130p-gpucc.h>
@@ -2237,8 +2238,8 @@ mdss_dsi0: dsi@ae94000 {
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>,
-							 <&mdss_dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&mdss_dsi_opp_table>;
 
@@ -2333,8 +2334,8 @@ mdss_dsi1: dsi@ae96000 {
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi1_phy 0>,
-							 <&mdss_dsi1_phy 1>;
+				assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&mdss_dsi_opp_table>;
 
@@ -2392,10 +2393,10 @@ dispcc: clock-controller@af00000 {
 				 <&rpmhcc RPMH_CXO_CLK_A>,
 				 <&gcc GCC_DISP_AHB_CLK>,
 				 <&sleep_clk>,
-				 <&mdss_dsi0_phy 0>,
-				 <&mdss_dsi0_phy 1>,
-				 <&mdss_dsi1_phy 0>,
-				 <&mdss_dsi1_phy 1>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
 				 <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
 				 <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 				 <0>, /* dp1 */

-- 
2.39.5

Re: [PATCH 1/3] arm64: dts: qcom: sar2130p: use TAG_ALWAYS for MDSS's mdp0-mem path

[Konrad Dybcio]

On 6/18/25 7:49 PM, Dmitry Baryshkov wrote:
> Switch the main memory interconnect of the MDSS device to use
> QCOM_ICC_TAG_ALWAYS instead of _ACTIVE_ONLY.
> 
> Fixes: 541d0b2f4dcd ("arm64: dts: qcom: sar2130p: add display nodes")
> Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad

Re: [PATCH 2/3] arm64: dts: qcom: sar2130p: correct VBIF region size for MDSS

[Konrad Dybcio]

On 6/18/25 7:49 PM, Dmitry Baryshkov wrote:
> Correct the VBIF region size for the display device on the SAR1230P
> platform.
> 
> Fixes: 541d0b2f4dcd ("arm64: dts: qcom: sar2130p: add display nodes")
> Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> Closes: https://lore.kernel.org/all/c14dfd37-7d12-40c3-8281-fd0a7410813e@oss.qualcomm.com/
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad

Re: [PATCH 3/3] arm64: dts: qcom: sar2130p: use defines for DSI PHY clocks

[Konrad Dybcio]

On 6/18/25 7:49 PM, Dmitry Baryshkov wrote:
> Use defined IDs to reference DSI PHY clocks instead of using raw
> numbers.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad

Re: [PATCH 0/3] arm64: dts: qcom: sar2130p: correct display controller device

[Bjorn Andersson]

On Wed, 18 Jun 2025 20:49:50 +0300, Dmitry Baryshkov wrote:
> I didn't notice that Bjorn has picked up v1 of the SAR2130P display
> patchset instead of v5. Correct several mistakes that were fixed between
> those two versions.
> 
> 

Applied, thanks!

[1/3] arm64: dts: qcom: sar2130p: use TAG_ALWAYS for MDSS's mdp0-mem path
      commit: 8d99dfc9c83c5a4b6f16f190dda7b6ed132530a1
[2/3] arm64: dts: qcom: sar2130p: correct VBIF region size for MDSS
      commit: 6f49c8ab9137ceb5bbeed2a2fe9ab18c18ca025b
[3/3] arm64: dts: qcom: sar2130p: use defines for DSI PHY clocks
      commit: 05bb4e8ef9ffc3c3b0ba19bc3d74f72e334a6d40

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>