[PATCH v5 06/13] arm64: dts: mediatek: mt7988: add basic ethernet-nodes

[Frank Wunderlich <linux@fw-web.de>]

From: Frank Wunderlich <frank-w@public-files.de>

Add basic ethernet related nodes.

Mac1+2 needs pcs (sgmii+usxgmii) to work correctly which will be linked
later when driver is merged.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
v5:
- add reserved irqs and change name to fe0..fe3
- change rx-ringX to pdmaX to be closer to documentation

v4:
- comment for fixed-link on gmac0
- update 2g5 phy node
  - unit-name dec instead of hex to match reg property
  - move compatible before reg
  - drop phy-mode
- add interrupts for RSS
- add interrupt-names and drop reserved irqs for ethernet
- some reordering
- eth-reg and clock whitespace-fix based on angelos review
---
 arch/arm64/boot/dts/mediatek/mt7988a.dtsi | 128 +++++++++++++++++++++-
 1 file changed, 125 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
index 560ec86dbec0..3ab77ad4736a 100644
--- a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
@@ -680,7 +680,28 @@ xphyu3port0: usb-phy@11e13000 {
 			};
 		};
 
-		clock-controller@11f40000 {
+		xfi_tphy0: phy@11f20000 {
+			compatible = "mediatek,mt7988-xfi-tphy";
+			reg = <0 0x11f20000 0 0x10000>;
+			clocks = <&xfi_pll CLK_XFIPLL_PLL_EN>,
+				 <&topckgen CLK_TOP_XFI_PHY_0_XTAL_SEL>;
+			clock-names = "xfipll", "topxtal";
+			resets = <&watchdog 14>;
+			mediatek,usxgmii-performance-errata;
+			#phy-cells = <0>;
+		};
+
+		xfi_tphy1: phy@11f30000 {
+			compatible = "mediatek,mt7988-xfi-tphy";
+			reg = <0 0x11f30000 0 0x10000>;
+			clocks = <&xfi_pll CLK_XFIPLL_PLL_EN>,
+				 <&topckgen CLK_TOP_XFI_PHY_1_XTAL_SEL>;
+			clock-names = "xfipll", "topxtal";
+			resets = <&watchdog 15>;
+			#phy-cells = <0>;
+		};
+
+		xfi_pll: clock-controller@11f40000 {
 			compatible = "mediatek,mt7988-xfi-pll";
 			reg = <0 0x11f40000 0 0x1000>;
 			resets = <&watchdog 16>;
@@ -714,19 +735,120 @@ phy_calibration_p3: calib@97c {
 			};
 		};
 
-		clock-controller@15000000 {
+		ethsys: clock-controller@15000000 {
 			compatible = "mediatek,mt7988-ethsys", "syscon";
 			reg = <0 0x15000000 0 0x1000>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 		};
 
-		clock-controller@15031000 {
+		ethwarp: clock-controller@15031000 {
 			compatible = "mediatek,mt7988-ethwarp";
 			reg = <0 0x15031000 0 0x1000>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 		};
+
+		eth: ethernet@15100000 {
+			compatible = "mediatek,mt7988-eth";
+			reg = <0 0x15100000 0 0x80000>, <0 0x15400000 0 0x200000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+                                     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+                                     <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+                                     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "fe0", "fe1", "fe2", "fe3", "pdma0",
+					  "pdma1", "pdma2", "pdma3";
+			clocks = <&ethsys CLK_ETHDMA_CRYPT0_EN>,
+				 <&ethsys CLK_ETHDMA_FE_EN>,
+				 <&ethsys CLK_ETHDMA_GP2_EN>,
+				 <&ethsys CLK_ETHDMA_GP1_EN>,
+				 <&ethsys CLK_ETHDMA_GP3_EN>,
+				 <&ethwarp CLK_ETHWARP_WOCPU2_EN>,
+				 <&ethwarp CLK_ETHWARP_WOCPU1_EN>,
+				 <&ethwarp CLK_ETHWARP_WOCPU0_EN>,
+				 <&ethsys CLK_ETHDMA_ESW_EN>,
+				 <&topckgen CLK_TOP_ETH_GMII_SEL>,
+				 <&topckgen CLK_TOP_ETH_REFCK_50M_SEL>,
+				 <&topckgen CLK_TOP_ETH_SYS_200M_SEL>,
+				 <&topckgen CLK_TOP_ETH_SYS_SEL>,
+				 <&topckgen CLK_TOP_ETH_XGMII_SEL>,
+				 <&topckgen CLK_TOP_ETH_MII_SEL>,
+				 <&topckgen CLK_TOP_NETSYS_SEL>,
+				 <&topckgen CLK_TOP_NETSYS_500M_SEL>,
+				 <&topckgen CLK_TOP_NETSYS_PAO_2X_SEL>,
+				 <&topckgen CLK_TOP_NETSYS_SYNC_250M_SEL>,
+				 <&topckgen CLK_TOP_NETSYS_PPEFB_250M_SEL>,
+				 <&topckgen CLK_TOP_NETSYS_WARP_SEL>,
+				 <&ethsys CLK_ETHDMA_XGP1_EN>,
+				 <&ethsys CLK_ETHDMA_XGP2_EN>,
+				 <&ethsys CLK_ETHDMA_XGP3_EN>;
+			clock-names = "crypto", "fe", "gp2", "gp1", "gp3",
+				      "ethwarp_wocpu2", "ethwarp_wocpu1",
+				      "ethwarp_wocpu0", "esw", "top_eth_gmii_sel",
+				      "top_eth_refck_50m_sel", "top_eth_sys_200m_sel",
+				      "top_eth_sys_sel", "top_eth_xgmii_sel",
+				      "top_eth_mii_sel", "top_netsys_sel",
+				      "top_netsys_500m_sel", "top_netsys_pao_2x_sel",
+				      "top_netsys_sync_250m_sel",
+				      "top_netsys_ppefb_250m_sel",
+				      "top_netsys_warp_sel","xgp1", "xgp2", "xgp3";
+			assigned-clocks = <&topckgen CLK_TOP_NETSYS_2X_SEL>,
+					  <&topckgen CLK_TOP_NETSYS_GSW_SEL>,
+					  <&topckgen CLK_TOP_USXGMII_SBUS_0_SEL>,
+					  <&topckgen CLK_TOP_USXGMII_SBUS_1_SEL>,
+					  <&topckgen CLK_TOP_SGM_0_SEL>,
+					  <&topckgen CLK_TOP_SGM_1_SEL>;
+			assigned-clock-parents = <&apmixedsys CLK_APMIXED_NET2PLL>,
+						 <&topckgen CLK_TOP_NET1PLL_D4>,
+						 <&topckgen CLK_TOP_NET1PLL_D8_D4>,
+						 <&topckgen CLK_TOP_NET1PLL_D8_D4>,
+						 <&apmixedsys CLK_APMIXED_SGMPLL>,
+						 <&apmixedsys CLK_APMIXED_SGMPLL>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			mediatek,ethsys = <&ethsys>;
+			mediatek,infracfg = <&topmisc>;
+
+			gmac0: mac@0 {
+				compatible = "mediatek,eth-mac";
+				reg = <0>;
+				phy-mode = "internal";
+
+				/* Connected to internal switch */
+				fixed-link {
+					speed = <10000>;
+					full-duplex;
+					pause;
+				};
+			};
+
+			gmac1: mac@1 {
+				compatible = "mediatek,eth-mac";
+				reg = <1>;
+				status = "disabled";
+			};
+
+			gmac2: mac@2 {
+				compatible = "mediatek,eth-mac";
+				reg = <2>;
+				status = "disabled";
+			};
+
+			mdio_bus: mdio-bus {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/* internal 2.5G PHY */
+				int_2p5g_phy: ethernet-phy@15 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <15>;
+				};
+			};
+		};
 	};
 
 	thermal-zones {
-- 
2.43.0