linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Thomas Gleixner <tglx@linutronix.de>
To: LKML <linux-kernel@vger.kernel.org>
Cc: Richard Cochran <richardcochran@gmail.com>, netdev@vger.kernel.org
Subject: [patch 02/13] ptp: Split out PTP_EXTTS_REQUEST ioctl code
Date: Fri, 20 Jun 2025 15:24:29 +0200 (CEST)	[thread overview]
Message-ID: <20250620131943.842871495@linutronix.de> (raw)
In-Reply-To: 20250620130144.351492917@linutronix.de

Continue the ptp_ioctl() cleanup by splitting out the PTP_EXTTS_REQUEST
ioctl code into a helper function. Convert to a lock guard while at it.

No functional change intended.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 drivers/ptp/ptp_chardev.c |  105 +++++++++++++++++++++-------------------------
 1 file changed, 50 insertions(+), 55 deletions(-)

--- a/drivers/ptp/ptp_chardev.c
+++ b/drivers/ptp/ptp_chardev.c
@@ -177,12 +177,57 @@ static long ptp_clock_getcaps(struct ptp
 	return copy_to_user(arg, &caps, sizeof(caps)) ? -EFAULT : 0;
 }
 
+static long ptp_extts_request(struct ptp_clock *ptp, unsigned int cmd, void __user *arg)
+{
+	struct ptp_clock_request req = { .type = PTP_CLK_REQ_EXTTS };
+	struct ptp_clock_info *ops = ptp->info;
+	unsigned int supported_extts_flags;
+
+	if (copy_from_user(&req.extts, arg, sizeof(req.extts)))
+		return -EFAULT;
+
+	if (cmd == PTP_EXTTS_REQUEST2) {
+		/* Tell the drivers to check the flags carefully. */
+		req.extts.flags |= PTP_STRICT_FLAGS;
+		/* Make sure no reserved bit is set. */
+		if ((req.extts.flags & ~PTP_EXTTS_VALID_FLAGS) ||
+		    req.extts.rsv[0] || req.extts.rsv[1])
+			return -EINVAL;
+
+		/* Ensure one of the rising/falling edge bits is set. */
+		if ((req.extts.flags & PTP_ENABLE_FEATURE) &&
+		    (req.extts.flags & PTP_EXTTS_EDGES) == 0)
+			return -EINVAL;
+	} else {
+		req.extts.flags &= PTP_EXTTS_V1_VALID_FLAGS;
+		memset(req.extts.rsv, 0, sizeof(req.extts.rsv));
+	}
+
+	if (req.extts.index >= ops->n_ext_ts)
+		return -EINVAL;
+
+	supported_extts_flags = ptp->info->supported_extts_flags;
+	/* The PTP_ENABLE_FEATURE flag is always supported. */
+	supported_extts_flags |= PTP_ENABLE_FEATURE;
+	/* If the driver does not support strictly checking flags, the
+	 * PTP_RISING_EDGE and PTP_FALLING_EDGE flags are merely hints
+	 * which are not enforced.
+	 */
+	if (!(supported_extts_flags & PTP_STRICT_FLAGS))
+		supported_extts_flags |= PTP_EXTTS_EDGES;
+	/* Reject unsupported flags */
+	if (req.extts.flags & ~supported_extts_flags)
+		return -EOPNOTSUPP;
+
+	scoped_cond_guard(mutex_intr, return -ERESTARTSYS, &ptp->pincfg_mux)
+		return ops->enable(ops, &req, req.extts.flags & PTP_ENABLE_FEATURE ? 1 : 0);
+}
+
 long ptp_ioctl(struct posix_clock_context *pccontext, unsigned int cmd,
 	       unsigned long arg)
 {
 	struct ptp_clock *ptp =
 		container_of(pccontext->clk, struct ptp_clock, clock);
-	unsigned int i, pin_index, supported_extts_flags;
 	struct ptp_sys_offset_extended *extoff = NULL;
 	struct ptp_sys_offset_precise precise_offset;
 	struct system_device_crosststamp xtstamp;
@@ -192,6 +237,7 @@ long ptp_ioctl(struct posix_clock_contex
 	struct ptp_system_timestamp sts;
 	struct ptp_clock_request req;
 	struct ptp_clock_time *pct;
+	unsigned int i, pin_index;
 	struct ptp_pin_desc pd;
 	struct timespec64 ts;
 	int enable, err = 0;
@@ -210,60 +256,9 @@ long ptp_ioctl(struct posix_clock_contex
 
 	case PTP_EXTTS_REQUEST:
 	case PTP_EXTTS_REQUEST2:
-		if ((pccontext->fp->f_mode & FMODE_WRITE) == 0) {
-			err = -EACCES;
-			break;
-		}
-		memset(&req, 0, sizeof(req));
-
-		if (copy_from_user(&req.extts, (void __user *)arg,
-				   sizeof(req.extts))) {
-			err = -EFAULT;
-			break;
-		}
-		if (cmd == PTP_EXTTS_REQUEST2) {
-			/* Tell the drivers to check the flags carefully. */
-			req.extts.flags |= PTP_STRICT_FLAGS;
-			/* Make sure no reserved bit is set. */
-			if ((req.extts.flags & ~PTP_EXTTS_VALID_FLAGS) ||
-			    req.extts.rsv[0] || req.extts.rsv[1]) {
-				err = -EINVAL;
-				break;
-			}
-			/* Ensure one of the rising/falling edge bits is set. */
-			if ((req.extts.flags & PTP_ENABLE_FEATURE) &&
-			    (req.extts.flags & PTP_EXTTS_EDGES) == 0) {
-				err = -EINVAL;
-				break;
-			}
-		} else if (cmd == PTP_EXTTS_REQUEST) {
-			req.extts.flags &= PTP_EXTTS_V1_VALID_FLAGS;
-			req.extts.rsv[0] = 0;
-			req.extts.rsv[1] = 0;
-		}
-		if (req.extts.index >= ops->n_ext_ts) {
-			err = -EINVAL;
-			break;
-		}
-		supported_extts_flags = ptp->info->supported_extts_flags;
-		/* The PTP_ENABLE_FEATURE flag is always supported. */
-		supported_extts_flags |= PTP_ENABLE_FEATURE;
-		/* If the driver does not support strictly checking flags, the
-		 * PTP_RISING_EDGE and PTP_FALLING_EDGE flags are merely
-		 * hints which are not enforced.
-		 */
-		if (!(supported_extts_flags & PTP_STRICT_FLAGS))
-			supported_extts_flags |= PTP_EXTTS_EDGES;
-		/* Reject unsupported flags */
-		if (req.extts.flags & ~supported_extts_flags)
-			return -EOPNOTSUPP;
-		req.type = PTP_CLK_REQ_EXTTS;
-		enable = req.extts.flags & PTP_ENABLE_FEATURE ? 1 : 0;
-		if (mutex_lock_interruptible(&ptp->pincfg_mux))
-			return -ERESTARTSYS;
-		err = ops->enable(ops, &req, enable);
-		mutex_unlock(&ptp->pincfg_mux);
-		break;
+		if ((pccontext->fp->f_mode & FMODE_WRITE) == 0)
+			return -EACCES;
+		return ptp_extts_request(ptp, cmd, argptr);
 
 	case PTP_PEROUT_REQUEST:
 	case PTP_PEROUT_REQUEST2:


  parent reply	other threads:[~2025-06-20 13:24 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-06-20 13:24 [patch 00/13] ptp: Belated spring cleaning of the chardev driver Thomas Gleixner
2025-06-20 13:24 ` [patch 01/13] ptp: Split out PTP_CLOCK_GETCAPS ioctl code Thomas Gleixner
2025-06-21 20:22   ` Vadim Fedorenko
2025-06-20 13:24 ` Thomas Gleixner [this message]
2025-06-21 20:24   ` [patch 02/13] ptp: Split out PTP_EXTTS_REQUEST " Vadim Fedorenko
2025-06-20 13:24 ` [patch 03/13] ptp: Split out PTP_PEROUT_REQUEST " Thomas Gleixner
2025-06-21 20:24   ` Vadim Fedorenko
2025-06-20 13:24 ` [patch 04/13] ptp: Split out PTP_ENABLE_PPS " Thomas Gleixner
2025-06-21 20:25   ` Vadim Fedorenko
2025-06-20 13:24 ` [patch 05/13] ptp: Split out PTP_SYS_OFFSET_PRECISE " Thomas Gleixner
2025-06-21 20:27   ` Vadim Fedorenko
2025-06-20 13:24 ` [patch 06/13] ptp: Split out PTP_SYS_OFFSET_EXTENDED " Thomas Gleixner
2025-06-21 20:29   ` Vadim Fedorenko
2025-06-20 13:24 ` [patch 07/13] ptp: Split out PTP_SYS_OFFSET " Thomas Gleixner
2025-06-21 20:14   ` Vadim Fedorenko
2025-06-21 20:42     ` Thomas Gleixner
2025-06-21 20:58       ` Vadim Fedorenko
2025-06-20 13:24 ` [patch 08/13] ptp: Split out PTP_PIN_GETFUNC " Thomas Gleixner
2025-06-21 20:29   ` Vadim Fedorenko
2025-06-24  9:22   ` Paolo Abeni
2025-06-24 13:39     ` Thomas Gleixner
2025-06-25  8:19       ` Thomas Gleixner
2025-06-20 13:24 ` [patch 09/13] ptp: Split out PTP_PIN_SETFUNC " Thomas Gleixner
2025-06-21 20:30   ` Vadim Fedorenko
2025-06-20 13:24 ` [patch 10/13] ptp: Split out PTP_MASK_CLEAR_ALL " Thomas Gleixner
2025-06-21 20:36   ` Vadim Fedorenko
2025-06-21 20:44     ` Thomas Gleixner
2025-06-21 20:59       ` Vadim Fedorenko
2025-06-20 13:24 ` [patch 11/13] ptp: Split out PTP_MASK_EN_SINGLE " Thomas Gleixner
2025-06-21 20:32   ` Vadim Fedorenko
2025-06-20 13:24 ` [patch 12/13] ptp: Convert chardev code to lock guards Thomas Gleixner
2025-06-20 13:24 ` [patch 13/13] ptp: Convert ptp_open/read() to __free() Thomas Gleixner
2025-06-24  9:48   ` Paolo Abeni
2025-06-24 13:38     ` Thomas Gleixner
2025-06-24 16:36   ` Jakub Kicinski
2025-06-25 10:33     ` Thomas Gleixner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250620131943.842871495@linutronix.de \
    --to=tglx@linutronix.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=richardcochran@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).