From: Lothar Rubusch <l.rubusch@gmail.com>
To: jic23@kernel.org, dlechner@baylibre.com, nuno.sa@analog.com,
andy@kernel.org, corbet@lwn.net, lucas.p.stankus@gmail.com,
lars@metafoo.de, Michael.Hennerich@analog.com,
bagasdotme@gmail.com
Cc: l.rubusch@gmail.com, linux-iio@vger.kernel.org,
linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v6 6/8] iio: accel: adxl313: implement power-save on inactivity
Date: Sun, 22 Jun 2025 12:29:35 +0000 [thread overview]
Message-ID: <20250622122937.156930-7-l.rubusch@gmail.com> (raw)
In-Reply-To: <20250622122937.156930-1-l.rubusch@gmail.com>
Configure the link bit to associate activity and inactivity sensing,
allowing the sensor to reflect its internal power-saving state.
Additionally, enable the auto-sleep bit to transition the sensor into
auto-sleep mode during periods of inactivity, as outlined in the
datasheet.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
---
drivers/iio/accel/adxl313.h | 3 +++
drivers/iio/accel/adxl313_core.c | 22 ++++++++++++++++++++++
2 files changed, 25 insertions(+)
diff --git a/drivers/iio/accel/adxl313.h b/drivers/iio/accel/adxl313.h
index d7e8cb44855b..75ef54b60f75 100644
--- a/drivers/iio/accel/adxl313.h
+++ b/drivers/iio/accel/adxl313.h
@@ -41,6 +41,9 @@
#define ADXL313_RATE_BASE 6
#define ADXL313_POWER_CTL_MSK BIT(3)
+#define ADXL313_POWER_CTL_INACT_MSK GENMASK(5, 4)
+#define ADXL313_POWER_CTL_LINK BIT(5)
+#define ADXL313_POWER_CTL_AUTO_SLEEP BIT(4)
#define ADXL313_RANGE_MSK GENMASK(1, 0)
#define ADXL313_RANGE_MAX 3
diff --git a/drivers/iio/accel/adxl313_core.c b/drivers/iio/accel/adxl313_core.c
index 36cfd23d2e3c..40c75e90e4bf 100644
--- a/drivers/iio/accel/adxl313_core.c
+++ b/drivers/iio/accel/adxl313_core.c
@@ -396,6 +396,23 @@ static int adxl313_is_act_inact_en(struct adxl313_data *data,
return adxl313_act_int_reg[type] & regval;
}
+static int adxl313_set_act_inact_linkbit(struct adxl313_data *data, bool en)
+{
+ int act_en, inact_en;
+
+ act_en = adxl313_is_act_inact_en(data, ADXL313_ACTIVITY);
+ if (act_en < 0)
+ return act_en;
+
+ inact_en = adxl313_is_act_inact_en(data, ADXL313_INACTIVITY);
+ if (inact_en < 0)
+ return inact_en;
+
+ return regmap_assign_bits(data->regmap, ADXL313_REG_POWER_CTL,
+ ADXL313_POWER_CTL_AUTO_SLEEP | ADXL313_POWER_CTL_LINK,
+ en && act_en && inact_en);
+}
+
static int adxl313_set_act_inact_en(struct adxl313_data *data,
enum adxl313_activity_type type,
bool cmd_en)
@@ -455,6 +472,11 @@ static int adxl313_set_act_inact_en(struct adxl313_data *data,
if (ret)
return ret;
+ /* Set link-bit and auto-sleep only when ACT and INACT are enabled */
+ ret = adxl313_set_act_inact_linkbit(data, cmd_en);
+ if (ret)
+ return ret;
+
return adxl313_set_measure_en(data, true);
}
--
2.39.5
next prev parent reply other threads:[~2025-06-22 12:29 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-22 12:29 [PATCH v6 0/8] iio: accel: adxl313: add power-save on activity/inactivity Lothar Rubusch
2025-06-22 12:29 ` [PATCH v6 1/8] iio: accel: adxl313: make use of regmap cache Lothar Rubusch
2025-06-22 12:29 ` [PATCH v6 2/8] iio: accel: adxl313: add function to enable measurement Lothar Rubusch
2025-06-22 12:29 ` [PATCH v6 3/8] iio: accel: adxl313: add buffered FIFO watermark with interrupt handling Lothar Rubusch
2025-06-28 17:16 ` Jonathan Cameron
2025-07-01 7:23 ` Lothar Rubusch
2025-07-01 13:53 ` David Lechner
2025-06-22 12:29 ` [PATCH v6 4/8] iio: accel: adxl313: add activity sensing Lothar Rubusch
2025-06-28 17:27 ` Jonathan Cameron
2025-06-30 22:32 ` Lothar Rubusch
2025-07-01 17:34 ` Jonathan Cameron
2025-06-22 12:29 ` [PATCH v6 5/8] iio: accel: adxl313: add inactivity sensing Lothar Rubusch
2025-06-22 12:29 ` Lothar Rubusch [this message]
2025-06-22 12:29 ` [PATCH v6 7/8] iio: accel: adxl313: add AC coupled activity/inactivity events Lothar Rubusch
2025-06-22 12:29 ` [PATCH v6 8/8] docs: iio: add ADXL313 accelerometer Lothar Rubusch
2025-06-22 14:34 ` [PATCH v6 0/8] iio: accel: adxl313: add power-save on activity/inactivity Jonathan Cameron
2025-06-28 17:29 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250622122937.156930-7-l.rubusch@gmail.com \
--to=l.rubusch@gmail.com \
--cc=Michael.Hennerich@analog.com \
--cc=andy@kernel.org \
--cc=bagasdotme@gmail.com \
--cc=corbet@lwn.net \
--cc=dlechner@baylibre.com \
--cc=jic23@kernel.org \
--cc=lars@metafoo.de \
--cc=linux-doc@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lucas.p.stankus@gmail.com \
--cc=nuno.sa@analog.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).