[PATCH v5 0/3] arm64: dts: qcom: x1-hp-x14: Add support for X1P42100 HP Omnibook X14

[PATCH v5 0/3] arm64: dts: qcom: x1-hp-x14: Add support for X1P42100 HP Omnibook X14

[Jens Glathe via B4 Relay]

This patch series adds support for the HP Omnibook X Laptop 14-fe1xxx. [1]

Since this is actually the same model as the 14-fe0xxx, but with an
X1P-42-100 SoC (Purwa), it needs a slightly different device tree.
To have as minimal duplicate definition as possible, the hp X14 gets 
commonalized into a dtsi (and it stays compatible to the derived 
device trees, like the Ultrabook G1q). 

The supported features are the same as for the original Omnibook X14:

- Keyboard (no function keys though)
- Display
- PWM brightness control
- Touchpad
- Touchscreen
- PCIe ports (pcie4, pcie6a)
- USB type-c, type-a
- WCN6855 Wifi-6E
- WCN6855 Bluetooth
- ADSP and CDSP
- X1 GPU
- GPIO Keys (Lid switch)
- Audio definition (works via USB and with internal speakers)

[1]: https://www.hp.com/us-en/shop/pdp/hp-omnibook-x-laptop-next-gen-ai-pc-14-fe100-14-a4nd1av-1#techSpecs

Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
---
Changes in v5:
- rebased to next-20250708.
- changed commit message for patch #1 to reflect what happens
- moved gpu node into the common dtsi part (always supported now)
- switched over to gpu_zap_shader definition in the individual parts
- Link to v4: https://lore.kernel.org/r/20250705-hp-x14-x1p-v4-0-1c351dbeaf18@oldschoolsolutions.biz

Changes in v4:
- leave the qcom,jp-omnibook-x14 ABI unchanged, reuse it for the -fe0 variant
- hacked b4 to create an easier reviewable patch: https://lore.kernel.org/all/20250705-format-harder-v1-1-55c5342be55c@oldschoolsolutions.biz
- Link to v3: https://lore.kernel.org/r/20250703-hp-x14-x1p-v3-0-affe103b4356@oldschoolsolutions.biz

Changes in v3:
- removed copyright strings
- amended changed commit message  
- Link to v2: https://lore.kernel.org/r/20250702-hp-x14-x1p-v2-0-af5b588d1979@oldschoolsolutions.biz

Changes in v2:
- remove pm8010 handling
- Link to v1: https://lore.kernel.org/r/20250702-hp-x14-x1p-v1-0-219356e83207@oldschoolsolutions.biz

---
Jens Glathe (3):
      dt-bindings: arm: qcom: Add HP Omnibook X14 AI X1P4200 variant
      arm64: dts: qcom: x1-hp-x14: Commonalize HP Omnibook X14 device tree
      arm64: dts: qcom: x1-hp-x14: Add support for X1P42100 HP Omnibook X14

 Documentation/devicetree/bindings/arm/qcom.yaml    |    1 +
 arch/arm64/boot/dts/qcom/Makefile                  |    2 +
 arch/arm64/boot/dts/qcom/x1-hp-omnibook-x14.dtsi   | 1553 ++++++++++++++++++++
 .../boot/dts/qcom/x1e80100-hp-omnibook-x14.dts     | 1550 +------------------
 .../boot/dts/qcom/x1p42100-hp-omnibook-x14.dts     |   36 +
 5 files changed, 1596 insertions(+), 1546 deletions(-)
---
base-commit: 58ba80c4740212c29a1cf9b48f588e60a7612209
change-id: 20250702-hp-x14-x1p-eb32f4696d96

Best regards,
-- 
Jens Glathe <jens.glathe@oldschoolsolutions.biz>

[PATCH v5 1/3] dt-bindings: arm: qcom: Add HP Omnibook X14 AI X1P4200 variant

[Jens Glathe via B4 Relay]

From: Jens Glathe <jens.glathe@oldschoolsolutions.biz>

The HP Omnibook X14 AI PC is available in fe0 (Hamoa, x1e80100) and
fe1 (Purwa, x1p42100) SKUs. Since they are not completely dtb-compatible,
add amother variant:

hp,omnibook-x14-fe1 compatible to cqom,x1p42100

Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
---
 Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index ae43b35565808ed27cd8354b9a342545c4a98ed6..50b7b77dfe3e66f8fd57ccd5fd7e95a7e1ac2e35 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -1159,6 +1159,7 @@ properties:
       - items:
           - enum:
               - asus,zenbook-a14-ux3407qa
+              - hp,omnibook-x14-fe1
               - qcom,x1p42100-crd
           - const: qcom,x1p42100
 

-- 
2.48.1

[PATCH v5 2/3] arm64: dts: qcom: x1-hp-x14: Commonalize HP Omnibook X14 device tree

[Jens Glathe via B4 Relay]

From: Jens Glathe <jens.glathe@oldschoolsolutions.biz>

Commonalize the HP Omnibook X14 device tree for derivation of Hamoa (x1e*/x1p6*)
and Purwa (x1p4*/x1*) variants. Required because the device trees are not
compatible.

Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
---
 ...hp-omnibook-x14.dts => x1-hp-omnibook-x14.dtsi} |   23 -
 .../boot/dts/qcom/x1e80100-hp-omnibook-x14.dts     | 1610 +-------------------
 2 files changed, 34 insertions(+), 1599 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts b/arch/arm64/boot/dts/qcom/x1-hp-omnibook-x14.dtsi
similarity index 98%
copy from arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts
copy to arch/arm64/boot/dts/qcom/x1-hp-omnibook-x14.dtsi
index 8d2a9b7f4730783bbaa81e488a0e99cc195a195f..740d145d51a90b67e572b02486eeff9aa256fcde 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts
+++ b/arch/arm64/boot/dts/qcom/x1-hp-omnibook-x14.dtsi
@@ -4,17 +4,12 @@
  * Copyright (c) 2024, Xilin Wu <wuxilin123@gmail.com>
  */
 
-/dts-v1/;
-
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/gpio-keys.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 
-#include "x1e80100.dtsi"
-#include "x1e80100-pmics.dtsi"
-
 / {
 	model = "HP Omnibook X 14";
 	compatible = "hp,omnibook-x14", "qcom,x1e80100";
@@ -860,10 +855,6 @@ vreg_l3j_0p8: ldo3 {
 
 &gpu {
 	status = "okay";
-
-	zap-shader {
-		firmware-name = "qcom/x1e80100/hp/omnibook-x14/qcdxkmsuc8380.mbn";
-	};
 };
 
 &i2c0 {
@@ -1229,20 +1220,6 @@ &qupv3_2 {
 	status = "okay";
 };
 
-&remoteproc_adsp {
-	firmware-name = "qcom/x1e80100/hp/omnibook-x14/qcadsp8380.mbn",
-			"qcom/x1e80100/hp/omnibook-x14/adsp_dtbs.elf";
-
-	status = "okay";
-};
-
-&remoteproc_cdsp {
-	firmware-name = "qcom/x1e80100/hp/omnibook-x14/qccdsp8380.mbn",
-			"qcom/x1e80100/hp/omnibook-x14/cdsp_dtbs.elf";
-
-	status = "okay";
-};
-
 &smb2360_0 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts
dissimilarity index 98%
index 8d2a9b7f4730783bbaa81e488a0e99cc195a195f..29c8794c1aa10ce6b6400ec11f6e0d3de857b061 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts
@@ -1,1576 +1,34 @@
-// SPDX-License-Identifier: BSD-3-Clause
-/*
- * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
- * Copyright (c) 2024, Xilin Wu <wuxilin123@gmail.com>
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/gpio-keys.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
-
-#include "x1e80100.dtsi"
-#include "x1e80100-pmics.dtsi"
-
-/ {
-	model = "HP Omnibook X 14";
-	compatible = "hp,omnibook-x14", "qcom,x1e80100";
-	chassis-type = "laptop";
-
-	aliases {
-		serial0 = &uart21;
-		serial1 = &uart14;
-	};
-
-	wcd938x: audio-codec {
-		compatible = "qcom,wcd9385-codec";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&wcd_default>;
-
-		qcom,micbias1-microvolt = <1800000>;
-		qcom,micbias2-microvolt = <1800000>;
-		qcom,micbias3-microvolt = <1800000>;
-		qcom,micbias4-microvolt = <1800000>;
-		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
-		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
-		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
-		qcom,rx-device = <&wcd_rx>;
-		qcom,tx-device = <&wcd_tx>;
-
-		reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>;
-
-		vdd-buck-supply = <&vreg_l15b_1p8>;
-		vdd-rxtx-supply = <&vreg_l15b_1p8>;
-		vdd-io-supply = <&vreg_l15b_1p8>;
-		vdd-mic-bias-supply = <&vreg_bob1>;
-
-		#sound-dai-cells = <1>;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pmk8550_pwm 0 5000000>;
-
-		brightness-levels = <0 2048 4096 8192 16384 65535>;
-		num-interpolated-steps = <20>;
-		default-brightness-level = <80>;
-
-		enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
-		power-supply = <&vreg_edp_bl>;
-
-		pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>;
-		pinctrl-names = "default";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		pinctrl-0 = <&hall_int_n_default>;
-		pinctrl-names = "default";
-
-		switch-lid {
-			gpios = <&tlmm 92 GPIO_ACTIVE_LOW>;
-			linux,input-type = <EV_SW>;
-			linux,code = <SW_LID>;
-			wakeup-source;
-			wakeup-event-action = <EV_ACT_DEASSERTED>;
-		};
-	};
-
-	pmic-glink {
-		compatible = "qcom,x1e80100-pmic-glink",
-			     "qcom,sm8550-pmic-glink",
-			     "qcom,pmic-glink";
-		orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
-				    <&tlmm 123 GPIO_ACTIVE_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* Left-side port, closer to the screen */
-		connector@0 {
-			compatible = "usb-c-connector";
-			reg = <0>;
-			power-role = "dual";
-			data-role = "dual";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-
-					pmic_glink_ss0_hs_in: endpoint {
-						remote-endpoint = <&usb_1_ss0_dwc3_hs>;
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-
-					pmic_glink_ss0_ss_in: endpoint {
-						remote-endpoint = <&retimer_ss0_ss_out>;
-					};
-				};
-
-				port@2 {
-					reg = <2>;
-
-					pmic_glink_ss0_con_sbu_in: endpoint {
-						remote-endpoint = <&retimer_ss0_con_sbu_out>;
-					};
-				};
-			};
-		};
-
-		/* Left-side port, farther from the screen */
-		connector@1 {
-			compatible = "usb-c-connector";
-			reg = <1>;
-			power-role = "dual";
-			data-role = "dual";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-
-					pmic_glink_ss1_hs_in: endpoint {
-						remote-endpoint = <&usb_1_ss1_dwc3_hs>;
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-
-					pmic_glink_ss1_ss_in: endpoint {
-						remote-endpoint = <&usb_1_ss1_qmpphy_out>;
-					};
-				};
-
-				port@2 {
-					reg = <2>;
-
-					pmic_glink_ss1_sbu: endpoint {
-						remote-endpoint = <&usb_1_ss1_sbu_mux>;
-					};
-				};
-			};
-		};
-	};
-
-	reserved-memory {
-		linux,cma {
-			compatible = "shared-dma-pool";
-			size = <0x0 0x8000000>;
-			reusable;
-			linux,cma-default;
-		};
-	};
-
-	sound: sound {
-		compatible = "qcom,x1e80100-sndcard";
-		model = "X1E80100-HP-OMNIBOOK-X14";
-		audio-routing = "SpkrLeft IN", "WSA WSA_SPK1 OUT",
-				"SpkrRight IN", "WSA WSA_SPK2 OUT",
-				"IN1_HPHL", "HPHL_OUT",
-				"IN2_HPHR", "HPHR_OUT",
-				"AMIC2", "MIC BIAS2",
-				"VA DMIC0", "MIC BIAS3",
-				"VA DMIC1", "MIC BIAS3",
-				"VA DMIC2", "MIC BIAS1",
-				"VA DMIC3", "MIC BIAS1",
-				"VA DMIC0", "VA MIC BIAS3",
-				"VA DMIC1", "VA MIC BIAS3",
-				"VA DMIC2", "VA MIC BIAS1",
-				"VA DMIC3", "VA MIC BIAS1",
-				"TX SWR_INPUT1", "ADC2_OUTPUT";
-
-		wcd-playback-dai-link {
-			link-name = "WCD Playback";
-
-			cpu {
-				sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
-			};
-
-			codec {
-				sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
-			};
-
-			platform {
-				sound-dai = <&q6apm>;
-			};
-		};
-
-		wcd-capture-dai-link {
-			link-name = "WCD Capture";
-
-			cpu {
-				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
-			};
-
-			codec {
-				sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>;
-			};
-
-			platform {
-				sound-dai = <&q6apm>;
-			};
-		};
-
-		wsa-dai-link {
-			link-name = "WSA Playback";
-
-			cpu {
-				sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
-			};
-
-			codec {
-				sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>;
-			};
-
-			platform {
-				sound-dai = <&q6apm>;
-			};
-		};
-
-		va-dai-link {
-			link-name = "VA Capture";
-
-			cpu {
-				sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
-			};
-
-			codec {
-				sound-dai = <&lpass_vamacro 0>;
-			};
-
-			platform {
-				sound-dai = <&q6apm>;
-			};
-		};
-	};
-
-	vreg_edp_3p3: regulator-edp-3p3 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "VREG_EDP_3P3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-0 = <&edp_reg_en>;
-		pinctrl-names = "default";
-
-		regulator-boot-on;
-	};
-
-	vreg_edp_bl: regulator-edp-bl {
-		compatible = "regulator-fixed";
-
-		regulator-name = "VBL9";
-		regulator-min-microvolt = <3600000>;
-		regulator-max-microvolt = <3600000>;
-
-		gpio = <&pmc8380_3_gpios 10 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&edp_bl_reg_en>;
-
-		regulator-boot-on;
-	};
-
-	vreg_misc_3p3: regulator-misc-3p3 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "VREG_MISC_3P3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&pm8550ve_8_gpios 6 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&misc_3p3_reg_en>;
-
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	vreg_nvme: regulator-nvme {
-		compatible = "regulator-fixed";
-
-		regulator-name = "VREG_NVME_3P3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-0 = <&nvme_reg_en>;
-		pinctrl-names = "default";
-
-		regulator-boot-on;
-	};
-
-	vreg_rtmr0_1p15: regulator-rtmr0-1p15 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "VREG_RTMR0_1P15";
-		regulator-min-microvolt = <1150000>;
-		regulator-max-microvolt = <1150000>;
-
-		gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-0 = <&usb0_pwr_1p15_reg_en>;
-		pinctrl-names = "default";
-
-		regulator-boot-on;
-	};
-
-	vreg_rtmr0_1p8: regulator-rtmr0-1p8 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "VREG_RTMR0_1P8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-
-		gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-0 = <&usb0_1p8_reg_en>;
-		pinctrl-names = "default";
-
-		regulator-boot-on;
-	};
-
-	vreg_rtmr0_3p3: regulator-rtmr0-3p3 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "VREG_RTMR0_3P3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-0 = <&usb0_3p3_reg_en>;
-		pinctrl-names = "default";
-
-		regulator-boot-on;
-	};
-
-	vreg_vph_pwr: regulator-vph-pwr {
-		compatible = "regulator-fixed";
-
-		regulator-name = "vreg_vph_pwr";
-		regulator-min-microvolt = <3700000>;
-		regulator-max-microvolt = <3700000>;
-
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	vreg_wcn_3p3: regulator-wcn-3p3 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "VREG_WCN_3P3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-0 = <&wcn_sw_en>;
-		pinctrl-names = "default";
-
-		regulator-boot-on;
-	};
-
-	/*
-	 * TODO: These two regulators are actually part of the removable M.2
-	 * card and not the CRD mainboard. Need to describe this differently.
-	 * Functionally it works correctly, because all we need to do is to
-	 * turn on the actual 3.3V supply above.
-	 */
-	vreg_wcn_0p95: regulator-wcn-0p95 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "VREG_WCN_0P95";
-		regulator-min-microvolt = <950000>;
-		regulator-max-microvolt = <950000>;
-
-		vin-supply = <&vreg_wcn_3p3>;
-	};
-
-	vreg_wcn_1p9: regulator-wcn-1p9 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "VREG_WCN_1P9";
-		regulator-min-microvolt = <1900000>;
-		regulator-max-microvolt = <1900000>;
-
-		vin-supply = <&vreg_wcn_3p3>;
-	};
-
-	wcn6855-pmu {
-		compatible = "qcom,wcn6855-pmu";
-
-		vddaon-supply = <&vreg_wcn_0p95>;
-		vddio-supply = <&vreg_wcn_1p9>;
-		vddpcie1p3-supply = <&vreg_wcn_1p9>;
-		vddpcie1p9-supply = <&vreg_wcn_1p9>;
-		vddpmu-supply = <&vreg_wcn_0p95>;
-		vddpmumx-supply = <&vreg_wcn_0p95>;
-		vddpmucx-supply = <&vreg_wcn_0p95>;
-		vddrfa0p95-supply = <&vreg_wcn_0p95>;
-		vddrfa1p3-supply = <&vreg_wcn_1p9>;
-		vddrfa1p9-supply = <&vreg_wcn_1p9>;
-
-		wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
-		bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
-
-		pinctrl-0 = <&wcn_wlan_bt_en>;
-		pinctrl-names = "default";
-
-		regulators {
-			vreg_pmu_rfa_cmn_0p8: ldo0 {
-				regulator-name = "vreg_pmu_rfa_cmn_0p8";
-			};
-
-			vreg_pmu_aon_0p8: ldo1 {
-				regulator-name = "vreg_pmu_aon_0p8";
-			};
-
-			vreg_pmu_wlcx_0p8: ldo2 {
-				regulator-name = "vreg_pmu_wlcx_0p8";
-			};
-
-			vreg_pmu_wlmx_0p8: ldo3 {
-				regulator-name = "vreg_pmu_wlmx_0p8";
-			};
-
-			vreg_pmu_btcmx_0p8: ldo4 {
-				regulator-name = "vreg_pmu_btcmx_0p8";
-			};
-
-			vreg_pmu_pcie_1p8: ldo5 {
-				regulator-name = "vreg_pmu_pcie_1p8";
-			};
-
-			vreg_pmu_pcie_0p9: ldo6 {
-				regulator-name = "vreg_pmu_pcie_0p9";
-			};
-
-			vreg_pmu_rfa_0p8: ldo7 {
-				regulator-name = "vreg_pmu_rfa_0p8";
-			};
-
-			vreg_pmu_rfa_1p2: ldo8 {
-				regulator-name = "vreg_pmu_rfa_1p2";
-			};
-
-			vreg_pmu_rfa_1p7: ldo9 {
-				regulator-name = "vreg_pmu_rfa_1p7";
-			};
-		};
-	};
-
-	usb-1-ss1-sbu-mux {
-		compatible = "onnn,fsusb42", "gpio-sbu-mux";
-
-		enable-gpios = <&tlmm 179 GPIO_ACTIVE_LOW>;
-		select-gpios = <&tlmm 178 GPIO_ACTIVE_HIGH>;
-
-		pinctrl-0 = <&usb_1_ss1_sbu_default>;
-		pinctrl-names = "default";
-
-		mode-switch;
-		orientation-switch;
-
-		port {
-			usb_1_ss1_sbu_mux: endpoint {
-				remote-endpoint = <&pmic_glink_ss1_sbu>;
-			};
-		};
-	};
-};
-
-&apps_rsc {
-	regulators-0 {
-		compatible = "qcom,pm8550-rpmh-regulators";
-		qcom,pmic-id = "b";
-
-		vdd-bob1-supply = <&vreg_vph_pwr>;
-		vdd-bob2-supply = <&vreg_vph_pwr>;
-		vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
-		vdd-l2-l13-l14-supply = <&vreg_bob1>;
-		vdd-l5-l16-supply = <&vreg_bob1>;
-		vdd-l6-l7-supply = <&vreg_bob2>;
-		vdd-l8-l9-supply = <&vreg_bob1>;
-		vdd-l12-supply = <&vreg_s5j_1p2>;
-		vdd-l15-supply = <&vreg_s4c_1p8>;
-		vdd-l17-supply = <&vreg_bob2>;
-
-		vreg_bob1: bob1 {
-			regulator-name = "vreg_bob1";
-			regulator-min-microvolt = <3008000>;
-			regulator-max-microvolt = <3960000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_bob2: bob2 {
-			regulator-name = "vreg_bob2";
-			regulator-min-microvolt = <2504000>;
-			regulator-max-microvolt = <3008000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l1b_1p8: ldo1 {
-			regulator-name = "vreg_l1b_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l2b_3p0: ldo2 {
-			regulator-name = "vreg_l2b_3p0";
-			regulator-min-microvolt = <3072000>;
-			regulator-max-microvolt = <3100000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l4b_1p8: ldo4 {
-			regulator-name = "vreg_l4b_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l5b_3p0: ldo5 {
-			regulator-name = "vreg_l5b_3p0";
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l6b_1p8: ldo6 {
-			regulator-name = "vreg_l6b_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2960000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l7b_2p8: ldo7 {
-			regulator-name = "vreg_l7b_2p8";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l8b_3p0: ldo8 {
-			regulator-name = "vreg_l8b_3p0";
-			regulator-min-microvolt = <3072000>;
-			regulator-max-microvolt = <3072000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l9b_2p9: ldo9 {
-			regulator-name = "vreg_l9b_2p9";
-			regulator-min-microvolt = <2960000>;
-			regulator-max-microvolt = <2960000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l10b_1p8: ldo10 {
-			regulator-name = "vreg_l10b_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l12b_1p2: ldo12 {
-			regulator-name = "vreg_l12b_1p2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-always-on;
-		};
-
-		vreg_l13b_3p0: ldo13 {
-			regulator-name = "vreg_l13b_3p0";
-			regulator-min-microvolt = <3072000>;
-			regulator-max-microvolt = <3100000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l14b_3p0: ldo14 {
-			regulator-name = "vreg_l14b_3p0";
-			regulator-min-microvolt = <3072000>;
-			regulator-max-microvolt = <3072000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l15b_1p8: ldo15 {
-			regulator-name = "vreg_l15b_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-always-on;
-		};
-
-		vreg_l16b_2p9: ldo16 {
-			regulator-name = "vreg_l16b_2p9";
-			regulator-min-microvolt = <2912000>;
-			regulator-max-microvolt = <2912000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l17b_2p5: ldo17 {
-			regulator-name = "vreg_l17b_2p5";
-			regulator-min-microvolt = <2504000>;
-			regulator-max-microvolt = <2504000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-
-	regulators-1 {
-		compatible = "qcom,pm8550ve-rpmh-regulators";
-		qcom,pmic-id = "c";
-
-		vdd-l1-supply = <&vreg_s5j_1p2>;
-		vdd-l2-supply = <&vreg_s1f_0p7>;
-		vdd-l3-supply = <&vreg_s1f_0p7>;
-		vdd-s4-supply = <&vreg_vph_pwr>;
-
-		vreg_s4c_1p8: smps4 {
-			regulator-name = "vreg_s4c_1p8";
-			regulator-min-microvolt = <1856000>;
-			regulator-max-microvolt = <2000000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l1c_1p2: ldo1 {
-			regulator-name = "vreg_l1c_1p2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l2c_0p8: ldo2 {
-			regulator-name = "vreg_l2c_0p8";
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <920000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l3c_0p8: ldo3 {
-			regulator-name = "vreg_l3c_0p8";
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <920000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-
-	regulators-2 {
-		compatible = "qcom,pmc8380-rpmh-regulators";
-		qcom,pmic-id = "d";
-
-		vdd-l1-supply = <&vreg_s1f_0p7>;
-		vdd-l2-supply = <&vreg_s1f_0p7>;
-		vdd-l3-supply = <&vreg_s4c_1p8>;
-		vdd-s1-supply = <&vreg_vph_pwr>;
-
-		vreg_l1d_0p8: ldo1 {
-			regulator-name = "vreg_l1d_0p8";
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <920000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l2d_0p9: ldo2 {
-			regulator-name = "vreg_l2d_0p9";
-			regulator-min-microvolt = <912000>;
-			regulator-max-microvolt = <920000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l3d_1p8: ldo3 {
-			regulator-name = "vreg_l3d_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-
-	regulators-3 {
-		compatible = "qcom,pmc8380-rpmh-regulators";
-		qcom,pmic-id = "e";
-
-		vdd-l2-supply = <&vreg_s1f_0p7>;
-		vdd-l3-supply = <&vreg_s5j_1p2>;
-
-		vreg_l2e_0p8: ldo2 {
-			regulator-name = "vreg_l2e_0p8";
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <920000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l3e_1p2: ldo3 {
-			regulator-name = "vreg_l3e_1p2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-
-	regulators-4 {
-		compatible = "qcom,pmc8380-rpmh-regulators";
-		qcom,pmic-id = "f";
-
-		vdd-l1-supply = <&vreg_s5j_1p2>;
-		vdd-l2-supply = <&vreg_s5j_1p2>;
-		vdd-l3-supply = <&vreg_s5j_1p2>;
-		vdd-s1-supply = <&vreg_vph_pwr>;
-
-		vreg_s1f_0p7: smps1 {
-			regulator-name = "vreg_s1f_0p7";
-			regulator-min-microvolt = <700000>;
-			regulator-max-microvolt = <1100000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l1f_1p0: ldo1 {
-			regulator-name = "vreg_l1f_1p0";
-			regulator-min-microvolt = <1024000>;
-			regulator-max-microvolt = <1024000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l2f_1p0: ldo2 {
-			regulator-name = "vreg_l2f_1p0";
-			regulator-min-microvolt = <1024000>;
-			regulator-max-microvolt = <1024000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l3f_1p0: ldo3 {
-			regulator-name = "vreg_l3f_1p0";
-			regulator-min-microvolt = <1024000>;
-			regulator-max-microvolt = <1024000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-
-	regulators-6 {
-		compatible = "qcom,pm8550ve-rpmh-regulators";
-		qcom,pmic-id = "i";
-
-		vdd-l1-supply = <&vreg_s4c_1p8>;
-		vdd-l2-supply = <&vreg_s5j_1p2>;
-		vdd-l3-supply = <&vreg_s1f_0p7>;
-		vdd-s1-supply = <&vreg_vph_pwr>;
-		vdd-s2-supply = <&vreg_vph_pwr>;
-
-		vreg_s1i_0p9: smps1 {
-			regulator-name = "vreg_s1i_0p9";
-			regulator-min-microvolt = <900000>;
-			regulator-max-microvolt = <920000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_s2i_1p0: smps2 {
-			regulator-name = "vreg_s2i_1p0";
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1100000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l1i_1p8: ldo1 {
-			regulator-name = "vreg_l1i_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l2i_1p2: ldo2 {
-			regulator-name = "vreg_l2i_1p2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l3i_0p8: ldo3 {
-			regulator-name = "vreg_l3i_0p8";
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <920000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-
-	regulators-7 {
-		compatible = "qcom,pm8550ve-rpmh-regulators";
-		qcom,pmic-id = "j";
-
-		vdd-l1-supply = <&vreg_s1f_0p7>;
-		vdd-l2-supply = <&vreg_s5j_1p2>;
-		vdd-l3-supply = <&vreg_s1f_0p7>;
-		vdd-s5-supply = <&vreg_vph_pwr>;
-
-		vreg_s5j_1p2: smps5 {
-			regulator-name = "vreg_s5j_1p2";
-			regulator-min-microvolt = <1256000>;
-			regulator-max-microvolt = <1304000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l1j_0p8: ldo1 {
-			regulator-name = "vreg_l1j_0p8";
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <920000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l2j_1p2: ldo2 {
-			regulator-name = "vreg_l2j_1p2";
-			regulator-min-microvolt = <1256000>;
-			regulator-max-microvolt = <1256000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l3j_0p8: ldo3 {
-			regulator-name = "vreg_l3j_0p8";
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <920000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-};
-
-&gpu {
-	status = "okay";
-
-	zap-shader {
-		firmware-name = "qcom/x1e80100/hp/omnibook-x14/qcdxkmsuc8380.mbn";
-	};
-};
-
-&i2c0 {
-	clock-frequency = <400000>;
-
-	status = "okay";
-
-	keyboard@3a {
-		compatible = "hid-over-i2c";
-		reg = <0x3a>;
-
-		hid-descr-addr = <0x1>;
-		interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
-
-		vdd-supply = <&vreg_misc_3p3>;
-		vddl-supply = <&vreg_l12b_1p2>;
-
-		pinctrl-0 = <&kybd_default>;
-		pinctrl-names = "default";
-
-		wakeup-source;
-	};
-
-	touchpad@15 {
-		compatible = "hid-over-i2c";
-		reg = <0x15>;
-
-		hid-descr-addr = <0x1>;
-		interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
-
-		vdd-supply = <&vreg_misc_3p3>;
-		vddl-supply = <&vreg_l12b_1p2>;
-
-		pinctrl-0 = <&tpad_default>;
-		pinctrl-names = "default";
-
-		wakeup-source;
-	};
-};
-
-&i2c3 {
-	clock-frequency = <400000>;
-
-	status = "okay";
-
-	typec-mux@8 {
-		compatible = "parade,ps8830";
-		reg = <0x08>;
-
-		clocks = <&rpmhcc RPMH_RF_CLK3>;
-
-		vdd-supply = <&vreg_rtmr0_1p15>;
-		vdd33-supply = <&vreg_rtmr0_3p3>;
-		vdd33-cap-supply = <&vreg_rtmr0_3p3>;
-		vddar-supply = <&vreg_rtmr0_1p15>;
-		vddat-supply = <&vreg_rtmr0_1p15>;
-		vddio-supply = <&vreg_rtmr0_1p8>;
-
-		reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>;
-
-		pinctrl-0 = <&rtmr0_default>;
-		pinctrl-names = "default";
-
-		orientation-switch;
-		retimer-switch;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				retimer_ss0_ss_out: endpoint {
-					remote-endpoint = <&pmic_glink_ss0_ss_in>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				retimer_ss0_ss_in: endpoint {
-					remote-endpoint = <&usb_1_ss0_qmpphy_out>;
-				};
-			};
-
-			port@2 {
-				reg = <2>;
-
-				retimer_ss0_con_sbu_out: endpoint {
-					remote-endpoint = <&pmic_glink_ss0_con_sbu_in>;
-				};
-			};
-		};
-	};
-};
-
-&i2c5 {
-	clock-frequency = <400000>;
-	status = "okay";
-
-	eusb3_repeater: redriver@47 {
-		compatible = "nxp,ptn3222";
-		reg = <0x47>;
-		#phy-cells = <0>;
-
-		vdd3v3-supply = <&vreg_l13b_3p0>;
-		vdd1v8-supply = <&vreg_l4b_1p8>;
-
-		reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
-
-		pinctrl-0 = <&eusb3_reset_n>;
-		pinctrl-names = "default";
-
-	};
-};
-
-&i2c8 {
-	clock-frequency = <400000>;
-
-	status = "okay";
-
-	touchscreen@10 {
-		compatible = "hid-over-i2c";
-		reg = <0x10>;
-
-		hid-descr-addr = <0x1>;
-		interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>;
-
-		vdd-supply = <&vreg_misc_3p3>;
-		vddl-supply = <&vreg_l15b_1p8>;
-
-		pinctrl-0 = <&ts0_default>;
-		pinctrl-names = "default";
-	};
-};
-
-&lpass_tlmm {
-	spkr_01_sd_n_active: spkr-01-sd-n-active-state {
-		pins = "gpio12";
-		function = "gpio";
-		drive-strength = <16>;
-		bias-disable;
-		output-low;
-	};
-};
-
-&lpass_vamacro {
-	pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
-	pinctrl-names = "default";
-
-	vdd-micb-supply = <&vreg_l1b_1p8>;
-	qcom,dmic-sample-rate = <4800000>;
-};
-
-&mdss {
-	status = "okay";
-};
-
-&mdss_dp0 {
-	status = "okay";
-};
-
-&mdss_dp0_out {
-	data-lanes = <0 1>;
-	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
-};
-
-&mdss_dp1 {
-	status = "okay";
-};
-
-&mdss_dp1_out {
-	data-lanes = <0 1>;
-	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
-};
-
-&mdss_dp3 {
-	/delete-property/ #sound-dai-cells;
-
-	status = "okay";
-
-	aux-bus {
-		panel {
-			compatible = "edp-panel";
-			power-supply = <&vreg_edp_3p3>;
-
-			backlight = <&backlight>;
-
-			port {
-				edp_panel_in: endpoint {
-					remote-endpoint = <&mdss_dp3_out>;
-				};
-			};
-		};
-	};
-
-	ports {
-		port@1 {
-			reg = <1>;
-
-			mdss_dp3_out: endpoint {
-				data-lanes = <0 1 2 3>;
-				link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
-
-				remote-endpoint = <&edp_panel_in>;
-			};
-		};
-	};
-};
-
-&mdss_dp3_phy {
-	vdda-phy-supply = <&vreg_l3j_0p8>;
-	vdda-pll-supply = <&vreg_l2j_1p2>;
-
-	status = "okay";
-};
-
-&pcie4 {
-	perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
-	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
-
-	pinctrl-0 = <&pcie4_default>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&pcie4_phy {
-	vdda-phy-supply = <&vreg_l3i_0p8>;
-	vdda-pll-supply = <&vreg_l3e_1p2>;
-
-	status = "okay";
-};
-
-&pcie4_port0 {
-	wifi@0 {
-		compatible = "pci17cb,1107";
-		reg = <0x10000 0x0 0x0 0x0 0x0>;
-
-		vddaon-supply = <&vreg_pmu_aon_0p8>;
-		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
-		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
-		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
-		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
-		vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
-		vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>;
-		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
-		vddwlmx-supply = <&vreg_pmu_wlmx_0p8>;
-	};
-};
-
-&pcie6a {
-	perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
-	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
-
-	vddpe-3v3-supply = <&vreg_nvme>;
-
-	pinctrl-0 = <&pcie6a_default>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&pcie6a_phy {
-	vdda-phy-supply = <&vreg_l1d_0p8>;
-	vdda-pll-supply = <&vreg_l2j_1p2>;
-
-	status = "okay";
-};
-
-&pm8550_gpios {
-	rtmr0_default: rtmr0-reset-n-active-state {
-		pins = "gpio10";
-		function = "normal";
-		power-source = <1>; /* 1.8V */
-		bias-disable;
-		input-disable;
-		output-enable;
-	};
-
-	usb0_3p3_reg_en: usb0-3p3-reg-en-state {
-		pins = "gpio11";
-		function = "normal";
-		power-source = <1>; /* 1.8V */
-		bias-disable;
-		input-disable;
-		output-enable;
-	};
-};
-
-&pm8550ve_8_gpios {
-	misc_3p3_reg_en: misc-3p3-reg-en-state {
-		pins = "gpio6";
-		function = "normal";
-		bias-disable;
-		drive-push-pull;
-		input-disable;
-		output-enable;
-		power-source = <1>; /* 1.8 V */
-		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
-	};
-};
-
-&pm8550ve_9_gpios {
-	usb0_1p8_reg_en: usb0-1p8-reg-en-state {
-		pins = "gpio8";
-		function = "normal";
-		power-source = <1>; /* 1.8V */
-		bias-disable;
-		input-disable;
-		output-enable;
-	};
-};
-
-&pmc8380_3_gpios {
-	edp_bl_en: edp-bl-en-state {
-		pins = "gpio4";
-		function = "normal";
-		power-source = <1>; /* 1.8V */
-		input-disable;
-		output-enable;
-	};
-
-	edp_bl_reg_en: edp-bl-reg-en-state {
-		pins = "gpio10";
-		function = "normal";
-	};
-
-};
-
-&pmc8380_5_gpios {
-	usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state {
-		pins = "gpio8";
-		function = "normal";
-		power-source = <1>; /* 1.8V */
-		bias-disable;
-		input-disable;
-		output-enable;
-	};
-};
-
-&pmk8550_gpios {
-	edp_bl_pwm: edp-bl-pwm-state {
-		pins = "gpio5";
-		function = "func3";
-	};
-};
-
-&pmk8550_pwm {
-	status = "okay";
-};
-
-&qupv3_0 {
-	status = "okay";
-};
-
-&qupv3_1 {
-	status = "okay";
-};
-
-&qupv3_2 {
-	status = "okay";
-};
-
-&remoteproc_adsp {
-	firmware-name = "qcom/x1e80100/hp/omnibook-x14/qcadsp8380.mbn",
-			"qcom/x1e80100/hp/omnibook-x14/adsp_dtbs.elf";
-
-	status = "okay";
-};
-
-&remoteproc_cdsp {
-	firmware-name = "qcom/x1e80100/hp/omnibook-x14/qccdsp8380.mbn",
-			"qcom/x1e80100/hp/omnibook-x14/cdsp_dtbs.elf";
-
-	status = "okay";
-};
-
-&smb2360_0 {
-	status = "okay";
-};
-
-&smb2360_0_eusb2_repeater {
-	vdd18-supply = <&vreg_l3d_1p8>;
-	vdd3-supply = <&vreg_l2b_3p0>;
-};
-
-&smb2360_1 {
-	status = "okay";
-};
-
-&smb2360_1_eusb2_repeater {
-	vdd18-supply = <&vreg_l3d_1p8>;
-	vdd3-supply = <&vreg_l14b_3p0>;
-};
-
-&swr0 {
-	pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>;
-	pinctrl-names = "default";
-
-	status = "okay";
-
-	/* WSA8845, Left Speaker */
-	left_spkr: speaker@0,0 {
-		compatible = "sdw20217020400";
-		reg = <0 0>;
-		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
-		#sound-dai-cells = <0>;
-		sound-name-prefix = "SpkrLeft";
-		vdd-1p8-supply = <&vreg_l15b_1p8>;
-		vdd-io-supply = <&vreg_l12b_1p2>;
-		qcom,port-mapping = <1 2 3 7 10 13>;
-	};
-
-	/* WSA8845, Right Speaker */
-	right_spkr: speaker@0,1 {
-		compatible = "sdw20217020400";
-		reg = <0 1>;
-		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
-		#sound-dai-cells = <0>;
-		sound-name-prefix = "SpkrRight";
-		vdd-1p8-supply = <&vreg_l15b_1p8>;
-		vdd-io-supply = <&vreg_l12b_1p2>;
-		qcom,port-mapping = <4 5 6 7 11 13>;
-	};
-};
-
-&swr1 {
-	status = "okay";
-
-	/* WCD9385 RX */
-	wcd_rx: codec@0,4 {
-		compatible = "sdw20217010d00";
-		reg = <0 4>;
-		qcom,rx-port-mapping = <1 2 3 4 5>;
-	};
-};
-
-&swr2 {
-	status = "okay";
-
-	/* WCD9385 TX */
-	wcd_tx: codec@0,3 {
-		compatible = "sdw20217010d00";
-		reg = <0 3>;
-		qcom,tx-port-mapping = <2 2 3 4>;
-	};
-};
-
-&tlmm {
-	gpio-reserved-ranges = <34 2>, /* Unused */
-			       <44 4>, /* SPI (TPM) */
-			       <72 2>, /* Secure EC I2C connection (?) */
-			       <238 1>; /* UFS Reset */
-
-	edp_reg_en: edp-reg-en-state {
-		pins = "gpio70";
-		function = "gpio";
-		drive-strength = <16>;
-		bias-disable;
-	};
-
-	eusb3_reset_n: eusb3-reset-n-state {
-		pins = "gpio6";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-		output-low;
-	};
-
-	hall_int_n_default: hall-int-n-state {
-		pins = "gpio92";
-		function = "gpio";
-		bias-disable;
-	};
-
-	kybd_default: kybd-default-state {
-		pins = "gpio67";
-		function = "gpio";
-		bias-pull-up;
-	};
-
-	nvme_reg_en: nvme-reg-en-state {
-		pins = "gpio18";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	pcie4_default: pcie4-default-state {
-		clkreq-n-pins {
-			pins = "gpio147";
-			function = "pcie4_clk";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-
-		perst-n-pins {
-			pins = "gpio146";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-disable;
-		};
-
-		wake-n-pins {
-			pins = "gpio148";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	pcie6a_default: pcie6a-default-state {
-		clkreq-n-pins {
-			pins = "gpio153";
-			function = "pcie6a_clk";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-
-		perst-n-pins {
-			pins = "gpio152";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-disable;
-		};
-
-		wake-n-pins {
-			pins = "gpio154";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	tpad_default: tpad-default-state {
-		pins = "gpio3";
-		function = "gpio";
-		bias-pull-up;
-	};
-
-	ts0_default: ts0-default-state {
-		int-n-pins {
-			pins = "gpio51";
-			function = "gpio";
-			bias-pull-up;
-		};
-
-		reset-n-pins {
-			pins = "gpio48";
-			function = "gpio";
-			output-high;
-			drive-strength = <16>;
-		};
-	};
-
-	usb_1_ss1_sbu_default: usb-1-ss1-sbu-state {
-		mode-pins {
-			pins = "gpio177";
-			function = "gpio";
-			bias-disable;
-			drive-strength = <2>;
-			output-high;
-		};
-
-		oe-n-pins {
-			pins = "gpio179";
-			function = "gpio";
-			bias-disable;
-			drive-strength = <2>;
-		};
-
-		sel-pins {
-			pins = "gpio178";
-			function = "gpio";
-			bias-disable;
-			drive-strength = <2>;
-		};
-	};
-
-	wcd_default: wcd-reset-n-active-state {
-		pins = "gpio191";
-		function = "gpio";
-		drive-strength = <16>;
-		bias-disable;
-		output-low;
-	};
-
-	wcn_sw_en: wcn-sw-en-state {
-		pins = "gpio214";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	wcn_wlan_bt_en: wcn-wlan-bt-en-state {
-		pins = "gpio116", "gpio117";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-	};
-};
-
-&uart14 {
-	status = "okay";
-
-	bluetooth {
-		compatible = "qcom,wcn6855-bt";
-		max-speed = <3200000>;
-
-		vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>;
-		vddaon-supply = <&vreg_pmu_aon_0p8>;
-		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
-		vddwlmx-supply = <&vreg_pmu_wlmx_0p8>;
-		vddbtcmx-supply = <&vreg_pmu_btcmx_0p8>;
-		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
-		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
-		vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
-	};
-};
-
-&usb_1_ss0_hsphy {
-	vdd-supply = <&vreg_l3j_0p8>;
-	vdda12-supply = <&vreg_l2j_1p2>;
-
-	phys = <&smb2360_0_eusb2_repeater>;
-
-	status = "okay";
-};
-
-&usb_1_ss0_qmpphy {
-	vdda-phy-supply = <&vreg_l3e_1p2>;
-	vdda-pll-supply = <&vreg_l1j_0p8>;
-
-	status = "okay";
-};
-
-&usb_1_ss0 {
-	status = "okay";
-};
-
-&usb_1_ss0_dwc3 {
-	dr_mode = "host";
-};
-
-&usb_1_ss0_dwc3_hs {
-	remote-endpoint = <&pmic_glink_ss0_hs_in>;
-};
-
-&usb_1_ss0_qmpphy_out {
-	remote-endpoint = <&retimer_ss0_ss_in>;
-};
-
-&usb_1_ss1_hsphy {
-	vdd-supply = <&vreg_l3j_0p8>;
-	vdda12-supply = <&vreg_l2j_1p2>;
-
-	phys = <&smb2360_1_eusb2_repeater>;
-
-	status = "okay";
-};
-
-&usb_1_ss1_qmpphy {
-	vdda-phy-supply = <&vreg_l3e_1p2>;
-	vdda-pll-supply = <&vreg_l2d_0p9>;
-
-	status = "okay";
-};
-
-&usb_1_ss1 {
-	status = "okay";
-};
-
-&usb_1_ss1_dwc3 {
-	dr_mode = "host";
-};
-
-&usb_1_ss1_dwc3_hs {
-	remote-endpoint = <&pmic_glink_ss1_hs_in>;
-};
-
-&usb_1_ss1_qmpphy_out {
-	remote-endpoint = <&pmic_glink_ss1_ss_in>;
-};
-
-&usb_mp {
-	status = "okay";
-};
-
-&usb_mp_dwc3 {
-	phys = <&usb_mp_hsphy0>, <&usb_mp_qmpphy0>;
-	phy-names = "usb2-0", "usb3-0";
-};
-
-&usb_mp_hsphy0 {
-	vdd-supply = <&vreg_l2e_0p8>;
-	vdda12-supply = <&vreg_l3e_1p2>;
-
-	phys = <&eusb3_repeater>;
-
-	status = "okay";
-};
-
-&usb_mp_qmpphy0 {
-	vdda-phy-supply = <&vreg_l3e_1p2>;
-	vdda-pll-supply = <&vreg_l3c_0p8>;
-
-	status = "okay";
-};
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "x1e80100.dtsi"
+#include "x1e80100-pmics.dtsi"
+#include "x1-hp-omnibook-x14.dtsi"
+
+/ {
+	model = "HP Omnibook X 14-fe0";
+	compatible = "hp,omnibook-x14", "qcom,x1e80100";
+	chassis-type = "laptop";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/x1e80100/hp/omnibook-x14/qcdxkmsuc8380.mbn";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/x1e80100/hp/omnibook-x14/qcadsp8380.mbn",
+			"qcom/x1e80100/hp/omnibook-x14/adsp_dtbs.elf";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/x1e80100/hp/omnibook-x14/qccdsp8380.mbn",
+			"qcom/x1e80100/hp/omnibook-x14/cdsp_dtbs.elf";
+
+	status = "okay";
+};

-- 
2.48.1

[PATCH v5 3/3] arm64: dts: qcom: x1-hp-x14: Add support for X1P42100 HP Omnibook X14

[Jens Glathe via B4 Relay]

From: Jens Glathe <jens.glathe@oldschoolsolutions.biz>

These laptops are the same as the already known 14-fe0xxx models, but
with a Purwa SoC, SKU number 14-fe1xxx. [1]

The supported features are the same as for the original Omnibook X14:

- Keyboard (no function keys though)
- Display
- PWM brightness control
- Touchpad
- Touchscreen
- PCIe ports (pcie4, pcie6a)
- USB type-c, type-a
- WCN6855 Wifi-6E
- WCN6855 Bluetooth
- ADSP and CDSP
- X1 GPU
- GPIO Keys (Lid switch)
- Audio definition (works via USB and with internal speakers)

https://www.hp.com/us-en/shop/pdp/hp-omnibook-x-laptop-next-gen-ai-pc-14-fe100-14-a4nd1av-1#techSpecs

Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
---
 arch/arm64/boot/dts/qcom/Makefile                  |  2 ++
 .../boot/dts/qcom/x1p42100-hp-omnibook-x14.dts     | 36 ++++++++++++++++++++++
 2 files changed, 38 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 4bfa926b6a0850c3c459bcba28129c559d50a7cf..63bf3ccc11124a70efb09782b57970b274d80d49 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -333,3 +333,5 @@ x1p42100-asus-zenbook-a14-el2-dtbs	:= x1p42100-asus-zenbook-a14.dtb x1-el2.dtbo
 dtb-$(CONFIG_ARCH_QCOM)	+= x1p42100-asus-zenbook-a14.dtb x1p42100-asus-zenbook-a14-el2.dtb
 x1p42100-crd-el2-dtbs	:= x1p42100-crd.dtb x1-el2.dtbo
 dtb-$(CONFIG_ARCH_QCOM)	+= x1p42100-crd.dtb x1p42100-crd-el2.dtb
+x1p42100-hp-omnibook-x14-el2-dtbs := x1p42100-hp-omnibook-x14.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1p42100-hp-omnibook-x14.dtb x1p42100-hp-omnibook-x14-el2.dtb
diff --git a/arch/arm64/boot/dts/qcom/x1p42100-hp-omnibook-x14.dts b/arch/arm64/boot/dts/qcom/x1p42100-hp-omnibook-x14.dts
new file mode 100644
index 0000000000000000000000000000000000000000..4ec975f9acec30dc8a2383a4c6c15c3e1ee754e1
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1p42100-hp-omnibook-x14.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "x1p42100.dtsi"
+#include "x1e80100-pmics.dtsi"
+#include "x1-hp-omnibook-x14.dtsi"
+/delete-node/ &pmc8380_6;
+/delete-node/ &pmc8380_6_thermal;
+
+/ {
+	model = "HP Omnibook X 14-fe1";
+	compatible = "hp,omnibook-x14-fe1", "qcom,x1p42100";
+	chassis-type = "laptop";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/x1p42100/hp/omnibook-x14/qcdxkmsucpurwa.mbn";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/x1p42100/hp/omnibook-x14/qcadsp8380.mbn",
+			"qcom/x1p42100/hp/omnibook-x14/adsp_dtbs.elf";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/x1p42100/hp/omnibook-x14/qccdsp8380.mbn",
+			"qcom/x1p42100/hp/omnibook-x14/cdsp_dtbs.elf";
+
+	status = "okay";
+};

-- 
2.48.1

Re: [PATCH v5 1/3] dt-bindings: arm: qcom: Add HP Omnibook X14 AI X1P4200 variant

[Krzysztof Kozlowski]

On Tue, Jul 08, 2025 at 10:34:06PM +0200, Jens Glathe wrote:
> The HP Omnibook X14 AI PC is available in fe0 (Hamoa, x1e80100) and
> fe1 (Purwa, x1p42100) SKUs. Since they are not completely dtb-compatible,
> add amother variant:
> 
> hp,omnibook-x14-fe1 compatible to cqom,x1p42100
> 
> Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
> ---
>  Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
>  1 file changed, 1 insertion(+)

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

Re: [PATCH v5 2/3] arm64: dts: qcom: x1-hp-x14: Commonalize HP Omnibook X14 device tree

[Krzysztof Kozlowski]

On Tue, Jul 08, 2025 at 10:34:07PM +0200, Jens Glathe wrote:
> Commonalize the HP Omnibook X14 device tree for derivation of Hamoa (x1e*/x1p6*)
> and Purwa (x1p4*/x1*) variants. Required because the device trees are not
> compatible.
> 
> Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
> ---
>  ...hp-omnibook-x14.dts => x1-hp-omnibook-x14.dtsi} |   23 -
>  .../boot/dts/qcom/x1e80100-hp-omnibook-x14.dts     | 1610 +-------------------
>  2 files changed, 34 insertions(+), 1599 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts b/arch/arm64/boot/dts/qcom/x1-hp-omnibook-x14.dtsi
> similarity index 98%
> copy from arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts
> copy to arch/arm64/boot/dts/qcom/x1-hp-omnibook-x14.dtsi
> index 8d2a9b7f4730783bbaa81e488a0e99cc195a195f..740d145d51a90b67e572b02486eeff9aa256fcde 100644
> --- a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts
> +++ b/arch/arm64/boot/dts/qcom/x1-hp-omnibook-x14.dtsi
> @@ -4,17 +4,12 @@
>   * Copyright (c) 2024, Xilin Wu <wuxilin123@gmail.com>
>   */
>  
> -/dts-v1/;
> -
>  #include <dt-bindings/gpio/gpio.h>
>  #include <dt-bindings/input/gpio-keys.h>
>  #include <dt-bindings/input/input.h>
>  #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
>  #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
>  
> -#include "x1e80100.dtsi"
> -#include "x1e80100-pmics.dtsi"
> -
>  / {
>  	model = "HP Omnibook X 14";
>  	compatible = "hp,omnibook-x14", "qcom,x1e80100";

All these properties should be gone from DTSI.

> @@ -860,10 +855,6 @@ vreg_l3j_0p8: ldo3 {
>  
>  &gpu {
>  	status = "okay";
> -
> -	zap-shader {
> -		firmware-name = "qcom/x1e80100/hp/omnibook-x14/qcdxkmsuc8380.mbn";
> -	};
>  };

...

> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.

Incomplete copyrights. While renaming/splitting you are not allowed to
change them.

> + */
> +
> +/dts-v1/;
> +
> +#include "x1e80100.dtsi"
> +#include "x1e80100-pmics.dtsi"
> +#include "x1-hp-omnibook-x14.dtsi"

Best regards,
Krzysztof

Re: [PATCH v5 3/3] arm64: dts: qcom: x1-hp-x14: Add support for X1P42100 HP Omnibook X14

[Krzysztof Kozlowski]

On Tue, Jul 08, 2025 at 10:34:08PM +0200, Jens Glathe wrote:
> These laptops are the same as the already known 14-fe0xxx models, but
> with a Purwa SoC, SKU number 14-fe1xxx. [1]
> 
> The supported features are the same as for the original Omnibook X14:
> 
> - Keyboard (no function keys though)
> - Display
> - PWM brightness control
> - Touchpad
> - Touchscreen
> - PCIe ports (pcie4, pcie6a)
> - USB type-c, type-a
> - WCN6855 Wifi-6E
> - WCN6855 Bluetooth
> - ADSP and CDSP
> - X1 GPU
> - GPIO Keys (Lid switch)
> - Audio definition (works via USB and with internal speakers)
> 
> https://www.hp.com/us-en/shop/pdp/hp-omnibook-x-laptop-next-gen-ai-pc-14-fe100-14-a4nd1av-1#techSpecs
> 
> Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
> ---
>  arch/arm64/boot/dts/qcom/Makefile                  |  2 ++
>  .../boot/dts/qcom/x1p42100-hp-omnibook-x14.dts     | 36 ++++++++++++++++++++++
>  2 files changed, 38 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 4bfa926b6a0850c3c459bcba28129c559d50a7cf..63bf3ccc11124a70efb09782b57970b274d80d49 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -333,3 +333,5 @@ x1p42100-asus-zenbook-a14-el2-dtbs	:= x1p42100-asus-zenbook-a14.dtb x1-el2.dtbo
>  dtb-$(CONFIG_ARCH_QCOM)	+= x1p42100-asus-zenbook-a14.dtb x1p42100-asus-zenbook-a14-el2.dtb
>  x1p42100-crd-el2-dtbs	:= x1p42100-crd.dtb x1-el2.dtbo
>  dtb-$(CONFIG_ARCH_QCOM)	+= x1p42100-crd.dtb x1p42100-crd-el2.dtb
> +x1p42100-hp-omnibook-x14-el2-dtbs := x1p42100-hp-omnibook-x14.dtb x1-el2.dtbo
> +dtb-$(CONFIG_ARCH_QCOM)	+= x1p42100-hp-omnibook-x14.dtb x1p42100-hp-omnibook-x14-el2.dtb
> diff --git a/arch/arm64/boot/dts/qcom/x1p42100-hp-omnibook-x14.dts b/arch/arm64/boot/dts/qcom/x1p42100-hp-omnibook-x14.dts
> new file mode 100644
> index 0000000000000000000000000000000000000000..4ec975f9acec30dc8a2383a4c6c15c3e1ee754e1
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/x1p42100-hp-omnibook-x14.dts
> @@ -0,0 +1,36 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.

Odd copyrights. How could this file be published in 2023? Before the
laptop was even made? And by Qualcomm? Qualcomm did nothing for this
laptop on Linux - it's a Windows platform for them.

Best regards,
Krzysztof

Re: [PATCH v5 3/3] arm64: dts: qcom: x1-hp-x14: Add support for X1P42100 HP Omnibook X14

[Jens Glathe]

Hi Krzysztof,

On 09.07.25 09:39, Krzysztof Kozlowski wrote:
> On Tue, Jul 08, 2025 at 10:34:08PM +0200, Jens Glathe wrote:
>> +// SPDX-License-Identifier: BSD-3-Clause
>> +/*
>> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
> Odd copyrights. How could this file be published in 2023? Before the
> laptop was even made? And by Qualcomm? Qualcomm did nothing for this
> laptop on Linux - it's a Windows platform for them.

Ok understood, only license identifier. But I do copy from other dts(i) 
files, there may be unchanged portions.

with best regards

Jens

Re: [PATCH v5 3/3] arm64: dts: qcom: x1-hp-x14: Add support for X1P42100 HP Omnibook X14

[Krzysztof Kozlowski]

On 09/07/2025 10:09, Jens Glathe wrote:
> Hi Krzysztof,
> 
> On 09.07.25 09:39, Krzysztof Kozlowski wrote:
>> On Tue, Jul 08, 2025 at 10:34:08PM +0200, Jens Glathe wrote:
>>> +// SPDX-License-Identifier: BSD-3-Clause
>>> +/*
>>> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
>> Odd copyrights. How could this file be published in 2023? Before the
>> laptop was even made? And by Qualcomm? Qualcomm did nothing for this
>> laptop on Linux - it's a Windows platform for them.
> 
> Ok understood, only license identifier. But I do copy from other dts(i) 
> files, there may be unchanged portions.


Then it is fine, although I really don't see much of a copy here. Every
property is different.

Best regards,
Krzysztof