[PATCH v4 08/10] arm64: dts: rockchip: Fix LCD panel port on rk3566-pinetab2

[Diederik de Haas <didi.debian@cknow.org>]

The MIPI DSI connector on the PineTab2 only has 1 port with 1 endpoint,
so drop the unit-address properties.

While at it, move 'rotation' property to its proper sorting position.

This fixes the following DTB validation warnings:

  node has a unit name, but no reg or ranges property

Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
---
 arch/arm64/boot/dts/rockchip/rk3566-pinetab2.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3566-pinetab2.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-pinetab2.dtsi
index 3473b1eef5cd..d0e38412d56a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-pinetab2.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3566-pinetab2.dtsi
@@ -282,11 +282,11 @@ lcd: panel@0 {
 		reg = <0>;
 		backlight = <&backlight>;
 		enable-gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
-		rotation = <90>;
 		power-supply = <&vcc_3v3>;
+		rotation = <90>;
 
-		port@0 {
-			panel_in_dsi: endpoint@0 {
+		port {
+			panel_in_dsi: endpoint {
 				remote-endpoint = <&dsi0_out_con>;
 			};
 		};
-- 
2.50.0