From: Wei Fang <wei.fang@nxp.com>
To: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
richardcochran@gmail.com, claudiu.manoil@nxp.com,
vladimir.oltean@nxp.com, xiaoning.wang@nxp.com,
andrew+netdev@lunn.ch, davem@davemloft.net, edumazet@google.com,
kuba@kernel.org, pabeni@redhat.com, vadim.fedorenko@linux.dev,
Frank.Li@nxp.com, shawnguo@kernel.org, s.hauer@pengutronix.de,
festevam@gmail.com
Cc: fushi.peng@nxp.com, devicetree@vger.kernel.org,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
imx@lists.linux.dev, kernel@pengutronix.de
Subject: [PATCH v2 net-next 10/14] net: enetc: Add enetc_update_ptp_sync_msg() to process PTP sync packet
Date: Wed, 16 Jul 2025 15:31:07 +0800 [thread overview]
Message-ID: <20250716073111.367382-11-wei.fang@nxp.com> (raw)
In-Reply-To: <20250716073111.367382-1-wei.fang@nxp.com>
Currently, the PTP Sync packets are processed in enetc_map_tx_buffs(),
which makes the function too long and not concise enough. Secondly,
for the upcoming ENETC v4 one-step support, some appropriate changes
are also needed. Therefore, enetc_update_ptp_sync_msg() is extracted
from enetc_map_tx_buffs() as a helper function to process the PTP Sync
packets.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
---
drivers/net/ethernet/freescale/enetc/enetc.c | 129 ++++++++++--------
.../net/ethernet/freescale/enetc/enetc_hw.h | 1 +
2 files changed, 71 insertions(+), 59 deletions(-)
diff --git a/drivers/net/ethernet/freescale/enetc/enetc.c b/drivers/net/ethernet/freescale/enetc/enetc.c
index c1373163a096..ef002ed2fdb9 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc.c
@@ -221,12 +221,79 @@ static void enetc_unwind_tx_frame(struct enetc_bdr *tx_ring, int count, int i)
}
}
+static u32 enetc_update_ptp_sync_msg(struct enetc_ndev_priv *priv,
+ struct sk_buff *skb)
+{
+ struct enetc_skb_cb *enetc_cb = ENETC_SKB_CB(skb);
+ u16 tstamp_off = enetc_cb->origin_tstamp_off;
+ u16 corr_off = enetc_cb->correction_off;
+ struct enetc_si *si = priv->si;
+ struct enetc_hw *hw = &si->hw;
+ __be32 new_sec_l, new_nsec;
+ __be16 new_sec_h;
+ u32 lo, hi, nsec;
+ u8 *data;
+ u64 sec;
+ u32 val;
+
+ lo = enetc_rd_hot(hw, ENETC_SICTR0);
+ hi = enetc_rd_hot(hw, ENETC_SICTR1);
+ sec = (u64)hi << 32 | lo;
+ nsec = do_div(sec, 1000000000);
+
+ /* Update originTimestamp field of Sync packet
+ * - 48 bits seconds field
+ * - 32 bits nanseconds field
+ *
+ * In addition, the UDP checksum needs to be updated
+ * by software after updating originTimestamp field,
+ * otherwise the hardware will calculate the wrong
+ * checksum when updating the correction field and
+ * update it to the packet.
+ */
+
+ data = skb_mac_header(skb);
+ new_sec_h = htons((sec >> 32) & 0xffff);
+ new_sec_l = htonl(sec & 0xffffffff);
+ new_nsec = htonl(nsec);
+ if (enetc_cb->udp) {
+ struct udphdr *uh = udp_hdr(skb);
+ __be32 old_sec_l, old_nsec;
+ __be16 old_sec_h;
+
+ old_sec_h = *(__be16 *)(data + tstamp_off);
+ inet_proto_csum_replace2(&uh->check, skb, old_sec_h,
+ new_sec_h, false);
+
+ old_sec_l = *(__be32 *)(data + tstamp_off + 2);
+ inet_proto_csum_replace4(&uh->check, skb, old_sec_l,
+ new_sec_l, false);
+
+ old_nsec = *(__be32 *)(data + tstamp_off + 6);
+ inet_proto_csum_replace4(&uh->check, skb, old_nsec,
+ new_nsec, false);
+ }
+
+ *(__be16 *)(data + tstamp_off) = new_sec_h;
+ *(__be32 *)(data + tstamp_off + 2) = new_sec_l;
+ *(__be32 *)(data + tstamp_off + 6) = new_nsec;
+
+ /* Configure single-step register */
+ val = ENETC_PM0_SINGLE_STEP_EN;
+ val |= ENETC_SET_SINGLE_STEP_OFFSET(corr_off);
+ if (enetc_cb->udp)
+ val |= ENETC_PM0_SINGLE_STEP_CH;
+
+ enetc_port_mac_wr(priv->si, ENETC_PM0_SINGLE_STEP, val);
+
+ return lo & ENETC_TXBD_TSTAMP;
+}
+
static int enetc_map_tx_buffs(struct enetc_bdr *tx_ring, struct sk_buff *skb)
{
bool do_vlan, do_onestep_tstamp = false, do_twostep_tstamp = false;
struct enetc_ndev_priv *priv = netdev_priv(tx_ring->ndev);
struct enetc_skb_cb *enetc_cb = ENETC_SKB_CB(skb);
- struct enetc_hw *hw = &priv->si->hw;
struct enetc_tx_swbd *tx_swbd;
int len = skb_headlen(skb);
union enetc_tx_bd temp_bd;
@@ -326,67 +393,11 @@ static int enetc_map_tx_buffs(struct enetc_bdr *tx_ring, struct sk_buff *skb)
}
if (do_onestep_tstamp) {
- u16 tstamp_off = enetc_cb->origin_tstamp_off;
- u16 corr_off = enetc_cb->correction_off;
- __be32 new_sec_l, new_nsec;
- u32 lo, hi, nsec, val;
- __be16 new_sec_h;
- u8 *data;
- u64 sec;
-
- lo = enetc_rd_hot(hw, ENETC_SICTR0);
- hi = enetc_rd_hot(hw, ENETC_SICTR1);
- sec = (u64)hi << 32 | lo;
- nsec = do_div(sec, 1000000000);
+ u32 tstamp = enetc_update_ptp_sync_msg(priv, skb);
/* Configure extension BD */
- temp_bd.ext.tstamp = cpu_to_le32(lo & 0x3fffffff);
+ temp_bd.ext.tstamp = cpu_to_le32(tstamp);
e_flags |= ENETC_TXBD_E_FLAGS_ONE_STEP_PTP;
-
- /* Update originTimestamp field of Sync packet
- * - 48 bits seconds field
- * - 32 bits nanseconds field
- *
- * In addition, the UDP checksum needs to be updated
- * by software after updating originTimestamp field,
- * otherwise the hardware will calculate the wrong
- * checksum when updating the correction field and
- * update it to the packet.
- */
- data = skb_mac_header(skb);
- new_sec_h = htons((sec >> 32) & 0xffff);
- new_sec_l = htonl(sec & 0xffffffff);
- new_nsec = htonl(nsec);
- if (enetc_cb->udp) {
- struct udphdr *uh = udp_hdr(skb);
- __be32 old_sec_l, old_nsec;
- __be16 old_sec_h;
-
- old_sec_h = *(__be16 *)(data + tstamp_off);
- inet_proto_csum_replace2(&uh->check, skb, old_sec_h,
- new_sec_h, false);
-
- old_sec_l = *(__be32 *)(data + tstamp_off + 2);
- inet_proto_csum_replace4(&uh->check, skb, old_sec_l,
- new_sec_l, false);
-
- old_nsec = *(__be32 *)(data + tstamp_off + 6);
- inet_proto_csum_replace4(&uh->check, skb, old_nsec,
- new_nsec, false);
- }
-
- *(__be16 *)(data + tstamp_off) = new_sec_h;
-+ *(__be32 *)(data + tstamp_off + 2) = new_sec_l;
-+ *(__be32 *)(data + tstamp_off + 6) = new_nsec;
-
- /* Configure single-step register */
- val = ENETC_PM0_SINGLE_STEP_EN;
- val |= ENETC_SET_SINGLE_STEP_OFFSET(corr_off);
- if (enetc_cb->udp)
- val |= ENETC_PM0_SINGLE_STEP_CH;
-
- enetc_port_mac_wr(priv->si, ENETC_PM0_SINGLE_STEP,
- val);
} else if (do_twostep_tstamp) {
skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
e_flags |= ENETC_TXBD_E_FLAGS_TWO_STEP_PTP;
diff --git a/drivers/net/ethernet/freescale/enetc/enetc_hw.h b/drivers/net/ethernet/freescale/enetc/enetc_hw.h
index 73763e8f4879..377c96325814 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc_hw.h
+++ b/drivers/net/ethernet/freescale/enetc/enetc_hw.h
@@ -614,6 +614,7 @@ enum enetc_txbd_flags {
#define ENETC_TXBD_STATS_WIN BIT(7)
#define ENETC_TXBD_TXSTART_MASK GENMASK(24, 0)
#define ENETC_TXBD_FLAGS_OFFSET 24
+#define ENETC_TXBD_TSTAMP GENMASK(29, 0)
static inline __le32 enetc_txbd_set_tx_start(u64 tx_start, u8 flags)
{
--
2.34.1
next prev parent reply other threads:[~2025-07-16 7:52 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-07-16 7:30 [PATCH v2 net-next 00/14] Add NETC Timer PTP driver and add PTP support for i.MX95 Wei Fang
2025-07-16 7:30 ` [PATCH v2 net-next 01/14] dt-bindings: ptp: add NETC Timer PTP clock Wei Fang
2025-07-16 19:19 ` Frank Li
2025-07-17 7:40 ` Krzysztof Kozlowski
2025-07-17 8:30 ` Wei Fang
2025-07-17 9:05 ` Vladimir Oltean
2025-07-17 9:55 ` Wei Fang
2025-07-17 12:42 ` Vladimir Oltean
2025-07-17 15:06 ` Frank Li
2025-07-22 14:36 ` Vladimir Oltean
2025-07-22 18:25 ` Frank Li
2025-07-17 10:04 ` Krzysztof Kozlowski
2025-07-17 10:28 ` Wei Fang
2025-07-16 7:30 ` [PATCH v2 net-next 02/14] dt-bindings: net: add nxp,netc-timer property Wei Fang
2025-07-16 19:28 ` Frank Li
2025-07-17 3:23 ` Wei Fang
2025-07-17 7:42 ` Krzysztof Kozlowski
2025-07-17 8:32 ` Wei Fang
2025-07-17 9:12 ` Krzysztof Kozlowski
2025-07-17 9:49 ` Wei Fang
2025-07-17 10:06 ` Krzysztof Kozlowski
2025-07-17 10:26 ` Wei Fang
2025-07-18 7:46 ` Krzysztof Kozlowski
2025-07-18 7:50 ` Krzysztof Kozlowski
2025-07-18 12:01 ` Vladimir Oltean
2025-07-21 6:00 ` Wei Fang
2025-07-21 12:23 ` Krzysztof Kozlowski
2025-07-16 7:31 ` [PATCH v2 net-next 03/14] ptp: netc: add NETC Timer PTP driver support Wei Fang
2025-07-16 19:58 ` Frank Li
2025-07-17 8:42 ` Wei Fang
2025-07-23 16:09 ` Vladimir Oltean
2025-07-24 2:36 ` Wei Fang
2025-07-16 7:31 ` [PATCH v2 net-next 04/14] ptp: netc: add PTP_CLK_REQ_PPS support Wei Fang
2025-07-16 20:05 ` Frank Li
2025-07-17 11:59 ` Wei Fang
2025-07-17 15:15 ` Frank Li
2025-07-18 2:08 ` Wei Fang
2025-07-16 7:31 ` [PATCH v2 net-next 05/14] ptp: netc: add periodic pulse output support Wei Fang
2025-07-16 20:26 ` Frank Li
2025-07-17 12:11 ` Wei Fang
2025-07-16 7:31 ` [PATCH v2 net-next 06/14] ptp: netc: add external trigger stamp support Wei Fang
2025-07-16 20:30 ` Frank Li
2025-07-16 7:31 ` [PATCH v2 net-next 07/14] ptp: netc: add debugfs support to loop back pulse signal Wei Fang
2025-07-16 20:32 ` Frank Li
2025-07-16 7:31 ` [PATCH v2 net-next 08/14] MAINTAINERS: add NETC Timer PTP clock driver section Wei Fang
2025-07-16 20:33 ` Frank Li
2025-07-16 7:31 ` [PATCH v2 net-next 09/14] net: enetc: save the parsed information of PTP packet to skb->cb Wei Fang
2025-07-16 20:46 ` Frank Li
2025-07-17 12:20 ` Wei Fang
2025-07-16 7:31 ` Wei Fang [this message]
2025-07-16 20:49 ` [PATCH v2 net-next 10/14] net: enetc: Add enetc_update_ptp_sync_msg() to process PTP sync packet Frank Li
2025-07-16 7:31 ` [PATCH v2 net-next 11/14] net: enetc: remove unnecessary CONFIG_FSL_ENETC_PTP_CLOCK check Wei Fang
2025-07-16 20:50 ` Frank Li
2025-07-16 7:31 ` [PATCH v2 net-next 12/14] net: enetc: add PTP synchronization support for ENETC v4 Wei Fang
2025-07-16 21:01 ` Frank Li
2025-07-17 12:35 ` Wei Fang
2025-07-17 22:07 ` Frank Li
2025-07-18 2:08 ` Wei Fang
2025-07-22 12:57 ` Vladimir Oltean
2025-07-22 13:41 ` Wei Fang
2025-07-16 7:31 ` [PATCH v2 net-next 13/14] net: enetc: don't update sync packet checksum if checksum offload is used Wei Fang
2025-07-16 21:03 ` Frank Li
2025-07-16 7:31 ` [PATCH v2 14/14] arm64: dts: imx95: Add NETC Timer support Wei Fang
2025-07-16 21:04 ` Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250716073111.367382-11-wei.fang@nxp.com \
--to=wei.fang@nxp.com \
--cc=Frank.Li@nxp.com \
--cc=andrew+netdev@lunn.ch \
--cc=claudiu.manoil@nxp.com \
--cc=conor+dt@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=festevam@gmail.com \
--cc=fushi.peng@nxp.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=richardcochran@gmail.com \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=vadim.fedorenko@linux.dev \
--cc=vladimir.oltean@nxp.com \
--cc=xiaoning.wang@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).