From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mail-pl1-f179.google.com (mail-pl1-f179.google.com [209.85.214.179]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id BDCF7381C4; Fri, 25 Jul 2025 00:45:37 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.214.179 ARC-Seal:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1753404339; cv=none; b=WGDmsBWoLhNI1+r0AR5mHk3Q7BhxpcX8owofj0w+iQ9h+SMY3P9+vxFl5Op4jRM6XXPj/b/5FsYobvT3MkXu8QWy2cScRVxpXPwafAiOU8Q+P+Dkf2BE6orJkExDNyPv7LUVGdeFe/Edg/mGMbVxH8stu37xunlsAx+RvFSAmvs= ARC-Message-Signature:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1753404339; c=relaxed/simple; bh=FUw3hrpfRgWEbjEOfJTjGs7KX2Lv9BVFkPaZEa8vsT0=; h=From:To:Cc:Subject:Date:Message-ID:MIME-Version; b=Bkhz4TRJOrl5OASpMlkmxhjgULTMSe2vl6fF8JyuzjWBJSFBHl8l8Sm5CB0ZobFkpu5onR4KZ7CcS4EN4U1/DJVAocDt35XSSP9VlgVQ9dCoJtkf3ZhPSBh9g8JVbdDSqUADpEsGq20b42xdi4FMwhsTtth2IaYwi3Qs0l+I0tg= ARC-Authentication-Results:i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com; spf=pass smtp.mailfrom=gmail.com; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b=FdWzfKiu; arc=none smtp.client-ip=209.85.214.179 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=gmail.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="FdWzfKiu" Received: by mail-pl1-f179.google.com with SMTP id d9443c01a7336-23dea2e01e4so20301265ad.1; Thu, 24 Jul 2025 17:45:37 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20230601; t=1753404337; x=1754009137; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:message-id:date:subject:cc :to:from:from:to:cc:subject:date:message-id:reply-to; bh=kGnAQTjevB/+SXulTHI90f94DUYDZuwyWJaOh0ZlfaE=; b=FdWzfKiu6gUqaKWtHRaaZSXwpKE0U43XdvX9nMUZs01BZJuSkvICVvnWhnCcBzuhEp IuVSRrUh5nITeXIbD22RRa6cEe70xgFM4Vf93F06ekEwodTwIDkwquego1sfwpWbD3tw jFMyZfpqxnCPee5yvC3aypUbcQJgnsccyOOVlJuNNbRsmngklsW4YBMXmp+L4/tfFqd3 o+F1gI3I+Xb/WmjzI2BKQBkL3NaTHOLGJD93YqMKVZGwbl+pKCebfos3cuCt/Ww7wVQT HGeM33XB1mLQeqPO5yGwpKrm5zwSoWjaQoahzyyUfCVqnpkS/LSo/QCJKz8Uhk4R2bzG RimA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1753404337; x=1754009137; h=content-transfer-encoding:mime-version:message-id:date:subject:cc :to:from:x-gm-message-state:from:to:cc:subject:date:message-id :reply-to; bh=kGnAQTjevB/+SXulTHI90f94DUYDZuwyWJaOh0ZlfaE=; b=wQTSi1ChS3+TBYbaJDLq+7BFjO7W1NNO6A0zpFKARHIgsPtROASxeKPPTCuChK3yLg G+RfKp/9xen7NW66UYJU0ewmXGCIl32nkEMku0x2N7S5yT9MuCbqOAZXBiDW1znUbcF1 obSio0sBEGZBW2e5X+p3enb1u+jtGggTZXbUAmohz4ZZwPZKyaJXqwCCDh4fEvmTj7Ei s6wl9OHyqdcyBkWR6CcCT4E/jPfSTWrrXVD043nDejG5bqp6CCiT2iypFHmMBhpXp+qW gDriFMYyJq+oXJ75hU56egvoGsF1MbSbR3gZhN7cB/OCx3OD2upFytVAqKxVNWX03Ji9 AK4w== X-Forwarded-Encrypted: i=1; AJvYcCUEnSpgzPyUbqGtvyIP2fzdSoaFOY7ayv1dwCsaVFsdZsi45GQP/tHhsVmwRYdGEJOJ7Whzn9gX4LB/NdqM@vger.kernel.org, AJvYcCVPCNC0F5Xp0JYYDSRq/895KUTh78d4I+UaXUO0mSCzkKnzXqdqY1+bSZPHxV0HlJQhMDnO5ABY5+/VlWTrpGnfUa2wCw==@vger.kernel.org, AJvYcCVXYXryJKQ60kRifo8yYGsHVmT5T6ZSuaoWJzYyguOUlKDeTSAMgn9nB0K1FiqFWRtB5S1RkFlDuDSeuw==@vger.kernel.org X-Gm-Message-State: AOJu0YwSs/mWK6yiReZf+fHbs5Dz1hAOzJSuAU3toeGwiPCIfu/fPiT+ 1Y9lqEaEZpPHmOx42pPnGnMMFUZJHp3u54T3B+ghMKbzYcC71wsyndQ+ X-Gm-Gg: ASbGncsdkxxP0aSK4D2LA/jcnEXRe3ShY5HWdX6dTlfpqPhAzKFBBbQZ508WpSsoqri +VO16/aWgC74q+sOzeA97T6Ux/ditbb/rhMm8EdWa9JmGtEeZDfVwDbvysT0RmwNjTyAgzsmqrd yYfxHL/vQ16Pf9LihteOq3Tc6SRykecA6qwl8hma5yfkMYu4weSncke6u4E0IOXPIJXQg6wtAuR qfRkxtaFjr3l1j6RYdiDHxH8SOtOaKvECZRD2JwXtp/JV2F8R0TOHnOArhT2UkoCMhbJxKIkJl4 KscyG1XlMCPCfhV+2M7KFXSbMne90WS7ZhXdvDP+VMoUxywZpC/D7O9ZReqdte9bNMkqYEFpnPX i3tQnxtw39LKi0eQ3uts4PtPVnYcrBCa7i+3wXqYYtBz2NsckKN91L4Nz6yacKC8lwhSTZ6SIdI yIUw== X-Google-Smtp-Source: AGHT+IG7yzJK9ytnMHqXCTGs73udSMNVLh34D8Kf9RQROdB5bxHxhyGmXetDwCT9w+vzAa6Y0UFDfw== X-Received: by 2002:a17:902:f54b:b0:234:9fea:ec5f with SMTP id d9443c01a7336-23fb2fce7bamr83315ad.1.1753404336800; Thu, 24 Jul 2025 17:45:36 -0700 (PDT) Received: from bliptop (108-228-232-20.lightspeed.sndgca.sbcglobal.net. [108.228.232.20]) by smtp.gmail.com with ESMTPSA id d9443c01a7336-23fa4901b99sm24157905ad.188.2025.07.24.17.45.35 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 24 Jul 2025 17:45:36 -0700 (PDT) From: "Derek J. Clark" To: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= , Hans de Goede Cc: Jean Delvare , Guenter Roeck , "Derek J . Clark" , platform-driver-x86@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org Subject: [PATCH 1/4] platform/x86: (ayn-ec) Add PWM Fan HWMON Interface Date: Thu, 24 Jul 2025 17:45:30 -0700 Message-ID: <20250725004533.63537-1-derekjohn.clark@gmail.com> X-Mailer: git-send-email 2.50.0 Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Adds platform driver for Ayn Loki and Tactoy Zeenix lines of handheld devices. This patch implements a hwmon interface for EC provided manual PWM fan control and user defined fan curves. A global ACPI lock is used when reading or writing from the EC. There are 4 fan modes implemented in this patch. Modes 0-3 act in accordance with the standard hwmon logic where 0 is 100% fan speed, 1 is manual control, and 2 is automatic control. As the EC only provides 3 modes by default, mode 0 is implemented by setting the device to manual and then setting fan speed to 100% directly. In mode 1 the PWM duty cycle is set in sysfs with values [0-255], which are then scaled to the EC max of 128. Mode 4 is an automatic mode where the fan curve is user defined. There are 5 total set points and each set point takes a temperature in Celsius [0-100] and a PWM duty cycle [0-255]. When the CPU temperature reaches a given set point, the corresponding duty cycle is automatically set by the EC. Signed-off-by: Derek J. Clark --- MAINTAINERS | 6 + drivers/platform/x86/Kconfig | 14 + drivers/platform/x86/Makefile | 3 + drivers/platform/x86/ayn-ec.c | 596 ++++++++++++++++++++++++++++++++++ 4 files changed, 619 insertions(+) create mode 100644 drivers/platform/x86/ayn-ec.c diff --git a/MAINTAINERS b/MAINTAINERS index d61b004005fd..5b816883fe7d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4035,6 +4035,12 @@ W: https://ez.analog.com/linux-software-drivers F: Documentation/devicetree/bindings/pwm/adi,axi-pwmgen.yaml F: drivers/pwm/pwm-axi-pwmgen.c +AYN PLATFORM EC DRIVER +M: Derek J. Clark +L: platform-driver-x86@vger.kernel.org +S: Maintained +F: drivers/platform/x86/ayn-ec.c + AZ6007 DVB DRIVER M: Mauro Carvalho Chehab L: linux-media@vger.kernel.org diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 6d238e120dce..61391be65a7b 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -304,6 +304,20 @@ config ASUS_TF103C_DOCK If you have an Asus TF103C tablet say Y or M here, for a generic x86 distro config say M here. +config AYN_EC + tristate "Ayn x86 devices EC platform control" + depends on ACPI + depends on HWMON + select LEDS_CLASS + select LEDS_CLASS_MULTICOLOR + help + This is a driver for Ayn and Tactoy x86 handheld devices. It provides + temperature monitoring, manual fan speed control, fan curve control, + and chassis RGB settings. + + If you have an x86 Ayn or Tactoy handheld device say M here. The module + will be called ayn-platform. + config MERAKI_MX100 tristate "Cisco Meraki MX100 Platform Driver" depends on GPIOLIB diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile index a0c5848513e3..d32504b89365 100644 --- a/drivers/platform/x86/Makefile +++ b/drivers/platform/x86/Makefile @@ -38,6 +38,9 @@ obj-$(CONFIG_ASUS_TF103C_DOCK) += asus-tf103c-dock.o obj-$(CONFIG_EEEPC_LAPTOP) += eeepc-laptop.o obj-$(CONFIG_EEEPC_WMI) += eeepc-wmi.o +# Ayn +obj-$(CONFIG_AYN_EC) += ayn-ec.o + # Cisco/Meraki obj-$(CONFIG_MERAKI_MX100) += meraki-mx100.o diff --git a/drivers/platform/x86/ayn-ec.c b/drivers/platform/x86/ayn-ec.c new file mode 100644 index 000000000000..06f232bd10fa --- /dev/null +++ b/drivers/platform/x86/ayn-ec.c @@ -0,0 +1,596 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Platform driver for Ayn x86 Handhelds. + * + * Implements multiple attributes provided by the EC. Fan reading and control, + * as well as temperature sensor readings are exposed via hwmon sysfs. EC RGB + * control is exposed via an led-class-multicolor interface. + * + * Fan control is provided via a pwm interface in the range [0-255]. Ayn use + * [0-128] as the range in the EC, the written value is scaled to accommodate. + * The EC also provides a configurable fan curve with five set points that + * associate a temperature in Celcius [0-100] with a fan speed [0-128]. The + * auto_point fan speeds are also scaled from the range [0-255]. Temperature + * readings are scaled from degrees to millidegrees when read. + * + * RGB control is provided using 4 registers. One each for the colors red, + * green, and blue are [0-255]. There is also a effect register that takes + * switches between an EC controlled breathing that cycles through all colors + * and fades in/out, and manual, which enables setting a user defined color. + * + * Copyright (C) 2025 Derek J. Clark + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Fan reading and PWM */ +#define AYN_SENSOR_PWM_FAN_ENABLE_REG 0x10 /* PWM operating mode */ +#define AYN_SENSOR_PWM_FAN_SET_REG 0x11 /* PWM duty cycle */ +#define AYN_SENSOR_PWM_FAN_SPEED_REG 0x20 /* Fan speed */ + +/* EC controlled fan curve registers */ +#define AYN_SENSOR_PWM_FAN_SPEED_1_REG 0x12 +#define AYN_SENSOR_PWM_FAN_SPEED_2_REG 0x14 +#define AYN_SENSOR_PWM_FAN_SPEED_3_REG 0x16 +#define AYN_SENSOR_PWM_FAN_SPEED_4_REG 0x18 +#define AYN_SENSOR_PWM_FAN_SPEED_5_REG 0x1A +#define AYN_SENSOR_PWM_FAN_TEMP_1_REG 0x13 +#define AYN_SENSOR_PWM_FAN_TEMP_2_REG 0x15 +#define AYN_SENSOR_PWM_FAN_TEMP_3_REG 0x17 +#define AYN_SENSOR_PWM_FAN_TEMP_4_REG 0x19 +#define AYN_SENSOR_PWM_FAN_TEMP_5_REG 0x1B + +/* Handle ACPI lock mechanism */ +#define ACPI_LOCK_DELAY_MS 500 +enum ayn_model { + ayn_loki_max = 1, + ayn_loki_minipro, + ayn_loki_zero, + tactoy_zeenix_lite, +}; + +struct ayn_device { + u32 ayn_lock; /* ACPI EC Lock */ +} drvdata; + +/* Handle ACPI lock mechanism */ +#define ACPI_LOCK_DELAY_MS 500 + +static bool lock_global_acpi_lock(void) +{ + return ACPI_SUCCESS(acpi_acquire_global_lock(ACPI_LOCK_DELAY_MS, + &drvdata.ayn_lock)); +} + +static bool unlock_global_acpi_lock(void) +{ + return ACPI_SUCCESS(acpi_release_global_lock(drvdata.ayn_lock)); +} + +/** + * read_from_ec() - Reads a value from the embedded controller. + * + * @reg: The register to start the read from. + * @size: The number of sequential registers the data is contained in. + * @val: Pointer to return the data with. + * + * Return: 0, or an error. + */ +static int read_from_ec(u8 reg, int size, long *val) +{ + int ret, i; + u8 buf; + + if (!lock_global_acpi_lock()) + return -EBUSY; + + *val = 0; + for (i = 0; i < size; i++) { + ret = ec_read(reg + i, &buf); + if (ret) + return ret; + *val <<= i * 8; + *val += buf; + } + + if (!unlock_global_acpi_lock()) + return -EBUSY; + + return 0; +} + +/** + * write_to_ec() - Writes a value to the embedded controller. + * + * @reg: The register to write to. + * @val: Value to write + * + * Return: 0, or an error. + */ +static int write_to_ec(u8 reg, u8 val) +{ + int ret; + + if (!lock_global_acpi_lock()) + return -EBUSY; + + pr_info("Writing EC value %d to register %u\n", val, reg); + ret = ec_write(reg, val); + + if (!unlock_global_acpi_lock()) + return -EBUSY; + + return ret; +} + +/** + * ayn_pwm_manual() - Enable manual control of the fan. + */ +static int ayn_pwm_manual(void) +{ + return write_to_ec(AYN_SENSOR_PWM_FAN_ENABLE_REG, 0x00); +} + +/** + * ayn_pwm_full() - Set fan to 100% speed. + */ +static int ayn_pwm_full(void) +{ + int ret; + + ret = write_to_ec(AYN_SENSOR_PWM_FAN_ENABLE_REG, 0x00); + if (ret) + return ret; + + return write_to_ec(AYN_SENSOR_PWM_FAN_SET_REG, 128); +} + +/** + * ayn_pwm_auto() - Enable automatic EC control of the fan. + */ +static int ayn_pwm_auto(void) +{ + return write_to_ec(AYN_SENSOR_PWM_FAN_ENABLE_REG, 0x01); +} + +/** + * ayn_pwm_auto() - Enable manually setting the fan curve for automatic + * EC control of the fan. + */ +static int ayn_pwm_user(void) +{ + return write_to_ec(AYN_SENSOR_PWM_FAN_ENABLE_REG, 0x02); +} + +/** + * ayn_ec_hwmon_is_visible() - Determines RO or RW for hwmon attribute sysfs. + * + * @drvdata: Unused void pointer to context data. + * @type: The hwmon_sensor_types type. + * @attr: The attribute to set RO/RW on. + * @channel: HWMON subsystem usage flags for the attribute. + * + * Return: Permission level. + */ +static umode_t ayn_ec_hwmon_is_visible(const void *drvdata, + enum hwmon_sensor_types type, u32 attr, + int channel) +{ + switch (type) { + case hwmon_fan: + return 0444; + case hwmon_pwm: + return 0644; + default: + return 0; + } +} + +/** + * ayn_pwm_fan_read() - Read from a hwmon pwm or fan attribute. + * + * @dev: parent device of the given attribute. + * @type: The hwmon_sensor_types type. + * @attr: The attribute to read from. + * @channel: HWMON subsystem usage flags for the attribute. + * @val: Pointer to return the read value from. + * + * Return: 0, or an error. + */ +static int ayn_pwm_fan_read(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long *val) +{ + int ret; + + switch (type) { + case hwmon_fan: + switch (attr) { + case hwmon_fan_input: + return read_from_ec(AYN_SENSOR_PWM_FAN_SPEED_REG, 2, + val); + default: + break; + } + break; + case hwmon_pwm: + switch (attr) { + case hwmon_pwm_enable: + ret = read_from_ec(AYN_SENSOR_PWM_FAN_ENABLE_REG, 1, + val); + if (ret) + return ret; + + /* EC uses 0 for manual, 1 for automatic, 2 for user + * fan curve. Reflect hwmon usage instead. + */ + if (*val == 1) { + *val = 2; + return 0; + } + + if (*val == 2) { + *val = 3; + return 0; + } + + /* Return 0 when fan at max, otherwise 1 for manual. */ + ret = read_from_ec(AYN_SENSOR_PWM_FAN_SET_REG, 1, val); + if (ret) + return ret; + + if (*val == 128) + *val = 0; + else + *val = 1; + + return ret; + case hwmon_pwm_input: + ret = read_from_ec(AYN_SENSOR_PWM_FAN_SET_REG, 1, val); + if (ret) + return ret; + + *val = *val << 1; /* Max value is 128, scale to 255 */ + + return 0; + default: + break; + } + break; + default: + break; + } + return -EOPNOTSUPP; +} + +/** + * ayn_pwm_fan_write() - Write to a hwmon pwm attribute. + * + * @dev: parent device of the given attribute. + * @type: The hwmon_sensor_types type. + * @attr: The attribute to write to. + * @channel: HWMON subsystem usage flags for the attribute. + * @val: Value to write. + * + * Return: 0, or an error. + */ +static int ayn_pwm_fan_write(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long val) +{ + switch (type) { + case hwmon_pwm: + switch (attr) { + case hwmon_pwm_enable: + switch (val) { + case 0: + return ayn_pwm_full(); + case 1: + return ayn_pwm_manual(); + case 2: + return ayn_pwm_auto(); + case 3: + return ayn_pwm_user(); + default: + return -EINVAL; + } + case hwmon_pwm_input: + if (val < 0 || val > 255) + return -EINVAL; + + val = val >> 1; /* Max value is 128, scale from 255 */ + + return write_to_ec(AYN_SENSOR_PWM_FAN_SET_REG, val); + default: + break; + } + break; + default: + break; + } + return -EOPNOTSUPP; +} + +static const struct hwmon_channel_info *ayn_ec_sensors[] = { + HWMON_CHANNEL_INFO(fan, HWMON_F_INPUT), + HWMON_CHANNEL_INFO(pwm, HWMON_PWM_INPUT | HWMON_PWM_ENABLE), + NULL, +}; + +static const struct hwmon_ops ayn_ec_hwmon_ops = { + .is_visible = ayn_ec_hwmon_is_visible, + .read = ayn_pwm_fan_read, + .write = ayn_pwm_fan_write, +}; + +static const struct hwmon_chip_info ayn_ec_chip_info = { + .ops = &ayn_ec_hwmon_ops, + .info = ayn_ec_sensors, +}; + +/** + * pwm_curve_store() - Write a fan curve speed or temperature value. + * + * @dev: The attribute's parent device. + * @attr: The attribute to read. + * @buf: Input value string from sysfs write. + * + * Return: Number of bytes read, or an error. + */ +static ssize_t pwm_curve_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) +{ + int ret, i, val; + u8 reg; + + ret = kstrtoint(buf, 0, &val); + if (ret) + return ret; + + i = to_sensor_dev_attr(attr)->index; + switch (i) { + case 0: + reg = AYN_SENSOR_PWM_FAN_SPEED_1_REG; + break; + case 1: + reg = AYN_SENSOR_PWM_FAN_SPEED_2_REG; + break; + case 2: + reg = AYN_SENSOR_PWM_FAN_SPEED_3_REG; + break; + case 3: + reg = AYN_SENSOR_PWM_FAN_SPEED_4_REG; + break; + case 4: + reg = AYN_SENSOR_PWM_FAN_SPEED_5_REG; + break; + case 5: + reg = AYN_SENSOR_PWM_FAN_TEMP_1_REG; + break; + case 6: + reg = AYN_SENSOR_PWM_FAN_TEMP_2_REG; + break; + case 7: + reg = AYN_SENSOR_PWM_FAN_TEMP_3_REG; + break; + case 8: + reg = AYN_SENSOR_PWM_FAN_TEMP_4_REG; + break; + case 9: + reg = AYN_SENSOR_PWM_FAN_TEMP_5_REG; + break; + default: + return -EINVAL; + } + + switch (i) { + case 0: + case 1: + case 2: + case 3: + case 4: + if (val < 0 || val > 255) + return -EINVAL; + val = val >> 1; /* Max EC value is 128, scale from 255 */ + break; + case 5: + case 6: + case 7: + case 8: + case 9: + if (val < 0 || val > 100) + return -EINVAL; + break; + default: + return -EINVAL; + } + + ret = write_to_ec(reg, val); + if (ret) + return ret; + return count; +} + +/** + * pwm_curve_show() - Read a fan curve speed or temperature value. + * + * @dev: The attribute's parent device. + * @attr: The attribute to read. + * @buf: Buffer to read to. + * + * Return: Number of bytes read, or an error. + */ +static ssize_t pwm_curve_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + int i, ret; + long val; + u8 reg; + + i = to_sensor_dev_attr(attr)->index; + switch (i) { + case 0: + reg = AYN_SENSOR_PWM_FAN_SPEED_1_REG; + break; + case 1: + reg = AYN_SENSOR_PWM_FAN_SPEED_2_REG; + break; + case 2: + reg = AYN_SENSOR_PWM_FAN_SPEED_3_REG; + break; + case 3: + reg = AYN_SENSOR_PWM_FAN_SPEED_4_REG; + break; + case 4: + reg = AYN_SENSOR_PWM_FAN_SPEED_5_REG; + break; + case 5: + reg = AYN_SENSOR_PWM_FAN_TEMP_1_REG; + break; + case 6: + reg = AYN_SENSOR_PWM_FAN_TEMP_2_REG; + break; + case 7: + reg = AYN_SENSOR_PWM_FAN_TEMP_3_REG; + break; + case 8: + reg = AYN_SENSOR_PWM_FAN_TEMP_4_REG; + break; + case 9: + reg = AYN_SENSOR_PWM_FAN_TEMP_5_REG; + break; + default: + return -EINVAL; + } + + ret = read_from_ec(reg, 1, &val); + if (ret) + return ret; + + switch (i) { + case 0: + case 1: + case 2: + case 3: + case 4: + val = val << 1; /* Max EC value is 128, scale to 255 */ + break; + default: + break; + } + + return sysfs_emit(buf, "%ld\n", val); +} + +/* Fan curve attributes */ +static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point1_pwm, pwm_curve, 0); +static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point2_pwm, pwm_curve, 1); +static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point3_pwm, pwm_curve, 2); +static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point4_pwm, pwm_curve, 3); +static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point5_pwm, pwm_curve, 4); +static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point1_temp, pwm_curve, 5); +static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point2_temp, pwm_curve, 6); +static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point3_temp, pwm_curve, 7); +static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point4_temp, pwm_curve, 8); +static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point5_temp, pwm_curve, 9); + +static struct attribute *ayn_sensors_attrs[] = { + &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point3_pwm.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point3_temp.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point4_pwm.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point4_temp.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point5_pwm.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point5_temp.dev_attr.attr, + NULL, +}; + +ATTRIBUTE_GROUPS(ayn_sensors); + +static int ayn_ec_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device *hwdev; + int ret; + + hwdev = devm_hwmon_device_register_with_info(dev, "aynec", NULL, + &ayn_ec_chip_info, + ayn_sensors_groups); + return PTR_ERR_OR_ZERO(hwdev); +} + +static struct platform_driver ayn_ec_driver = { + .driver = { + .name = "ayn-ec", + }, + .probe = ayn_ec_probe, +}; + +static struct platform_device *ayn_ec_device; + +static int __init ayn_ec_init(void) +{ + ayn_ec_device = platform_create_bundle(&ayn_ec_driver, ayn_ec_probe, + NULL, 0, NULL, 0); + + return PTR_ERR_OR_ZERO(ayn_ec_device); +} + +static void __exit ayn_ec_exit(void) +{ + platform_device_unregister(ayn_ec_device); + platform_driver_unregister(&ayn_ec_driver); +} + +static const struct dmi_system_id ayn_dmi_table[] = { + { + .matches = { + DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "ayn"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "Loki Max"), + }, + .driver_data = (void *)ayn_loki_max, + }, + { + .matches = { + DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "ayn"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "Loki MiniPro"), + }, + .driver_data = (void *)ayn_loki_minipro, + }, + { + .matches = { + DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "ayn"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "Loki Zero"), + }, + .driver_data = (void *)ayn_loki_zero, + }, + { + .matches = { + DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "Tectoy"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "Zeenix Lite"), + }, + .driver_data = (void *)tactoy_zeenix_lite, + }, + {}, +}; + +MODULE_DEVICE_TABLE(dmi, ayn_dmi_table); + +module_init(ayn_ec_init); +module_exit(ayn_ec_exit); + +MODULE_AUTHOR("Derek J. Clark "); +MODULE_DESCRIPTION("Platform driver that handles EC sensors of Ayn x86 devices"); +MODULE_LICENSE("GPL"); -- 2.50.0