From: Violet <violet@atl.tools>
To: Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v7 0/2] arm64: dts: qcom: add initial support for Samsung Galaxy S22
Date: Tue, 29 Jul 2025 12:03:29 +0000 [thread overview]
Message-ID: <20250729120331.287245-1-violet@atl.tools> (raw)
Changes in v7:
- Document the reserved GPIO pins, remove pin 50 as it does not
need to be reserved
- Clarify the phone isn't limited to USB 2.0 but rather USB 3.0
isn't implemented yet
- Add a newline before every 'status' node
Changes in v6:
- Remove debug features (bootargs, etc) that slipped in the v5 DTS
- Format and organize nodes correctly based on existing DTS,
move "status = "okay";" to the bottom always
- Solve "ddr_device_type" and "qcom,rmtfs-mem" warnings, the rest are
from existing SoC .dtsi
- Disable buttons, ufs and other features for later revision
Changes in v5:
- Properly format the thread
Changes in v4:
- Try to properly format the thread
Changes in v3:
- Removed unnecessary initrd start and end addresses
- Make sure r0q is in right order on Makefile
- Properly format memory addresses
- Set r0q to the correct, alphabetical order in documents
Changes in v2:
- Attempt to format the patchset thread correctly
Signed-off-by: Violet <violet@atl.tools>
Violet (2):
dt-bindings: arm: qcom: document r0q board binding
arm64: dts: qcom: add initial support for Samsung Galaxy S22
.../devicetree/bindings/arm/qcom.yaml | 1 +
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../boot/dts/qcom/sm8450-samsung-r0q.dts | 147 ++++++++++++++++++
3 files changed, 149 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sm8450-samsung-r0q.dts
--
2.50.1
next reply other threads:[~2025-07-29 12:03 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-07-29 12:03 Violet [this message]
2025-07-29 12:03 ` [PATCH v7 1/2] dt-bindings: arm: qcom: document r0q board binding Violet
2025-07-29 12:33 ` Krzysztof Kozlowski
2025-07-29 12:03 ` [PATCH v7 2/2] arm64: dts: qcom: add initial support for Samsung Galaxy S22 Violet
2025-07-29 12:11 ` Krishna Kurapati
2025-07-29 12:34 ` Krzysztof Kozlowski
2025-07-29 23:40 ` [PATCH v7 0/2] " Rob Herring (Arm)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250729120331.287245-1-violet@atl.tools \
--to=violet@atl.tools \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox