From: Varadarajan Narayanan <quic_varada@quicinc.com>
To: <andersson@kernel.org>, <mturquette@baylibre.com>,
<sboyd@kernel.org>, <robh@kernel.org>, <krzk+dt@kernel.org>,
<conor+dt@kernel.org>, <konradybcio@kernel.org>,
<rafael@kernel.org>, <viresh.kumar@linaro.org>,
<ilia.lin@kernel.org>, <djakov@kernel.org>,
<quic_srichara@quicinc.com>, <quic_mdalam@quicinc.com>,
<quic_varada@quicinc.com>, <linux-arm-msm@vger.kernel.org>,
<linux-clk@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <linux-pm@vger.kernel.org>
Subject: [PATCH v4 4/4] arm64: dts: qcom: ipq5424: Enable cpufreq
Date: Wed, 30 Jul 2025 13:43:16 +0530 [thread overview]
Message-ID: <20250730081316.547796-5-quic_varada@quicinc.com> (raw)
In-Reply-To: <20250730081316.547796-1-quic_varada@quicinc.com>
From: Sricharan Ramabadhran <quic_srichara@quicinc.com>
Add the qfprom, cpu clocks, A53 PLL and cpu-opp-table required for
CPU clock scaling.
Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
[ Added interconnect related entries, fix dt-bindings errors ]
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
---
v4: s/gpll0/clk_ref/ in clock-names
s/apss-clock/clock/ in node name
v3: Remove L3_CORE_CLK from cpu node as it comes through icc-clk
v2: Add 'interconnects' to cpu nodes
Add 'opp-peak-kBps' to opp table
Add '#interconnect-cells' to apss_clk
Remove unnecessary comment
Fix dt-binding-errors in qfprom node
---
arch/arm64/boot/dts/qcom/ipq5424.dtsi | 61 +++++++++++++++++++++++++++
1 file changed, 61 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/ipq5424.dtsi b/arch/arm64/boot/dts/qcom/ipq5424.dtsi
index 2eea8a078595..b4efffc6a375 100644
--- a/arch/arm64/boot/dts/qcom/ipq5424.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5424.dtsi
@@ -7,6 +7,7 @@
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,apss-ipq.h>
#include <dt-bindings/clock/qcom,ipq5424-cmn-pll.h>
#include <dt-bindings/clock/qcom,ipq5424-gcc.h>
#include <dt-bindings/reset/qcom,ipq5424-gcc.h>
@@ -52,6 +53,11 @@ cpu0: cpu@0 {
reg = <0x0>;
enable-method = "psci";
next-level-cache = <&l2_0>;
+ clocks = <&apss_clk APSS_SILVER_CORE_CLK>;
+ clock-names = "cpu";
+ operating-points-v2 = <&cpu_opp_table>;
+ interconnects = <&apss_clk MASTER_CPU &apss_clk SLAVE_L3>;
+
l2_0: l2-cache {
compatible = "cache";
cache-level = <2>;
@@ -72,6 +78,10 @@ cpu1: cpu@100 {
enable-method = "psci";
reg = <0x100>;
next-level-cache = <&l2_100>;
+ clocks = <&apss_clk APSS_SILVER_CORE_CLK>;
+ clock-names = "cpu";
+ operating-points-v2 = <&cpu_opp_table>;
+ interconnects = <&apss_clk MASTER_CPU &apss_clk SLAVE_L3>;
l2_100: l2-cache {
compatible = "cache";
@@ -87,6 +97,10 @@ cpu2: cpu@200 {
enable-method = "psci";
reg = <0x200>;
next-level-cache = <&l2_200>;
+ clocks = <&apss_clk APSS_SILVER_CORE_CLK>;
+ clock-names = "cpu";
+ operating-points-v2 = <&cpu_opp_table>;
+ interconnects = <&apss_clk MASTER_CPU &apss_clk SLAVE_L3>;
l2_200: l2-cache {
compatible = "cache";
@@ -102,6 +116,10 @@ cpu3: cpu@300 {
enable-method = "psci";
reg = <0x300>;
next-level-cache = <&l2_300>;
+ clocks = <&apss_clk APSS_SILVER_CORE_CLK>;
+ clock-names = "cpu";
+ operating-points-v2 = <&cpu_opp_table>;
+ interconnects = <&apss_clk MASTER_CPU &apss_clk SLAVE_L3>;
l2_300: l2-cache {
compatible = "cache";
@@ -119,6 +137,28 @@ scm {
};
};
+ cpu_opp_table: opp-table-cpu {
+ compatible = "operating-points-v2-kryo-cpu";
+ opp-shared;
+ nvmem-cells = <&cpu_speed_bin>;
+
+ opp-1416000000 {
+ opp-hz = /bits/ 64 <1416000000>;
+ opp-microvolt = <1>;
+ opp-supported-hw = <0x3>;
+ clock-latency-ns = <200000>;
+ opp-peak-kBps = <984000>;
+ };
+
+ opp-1800000000 {
+ opp-hz = /bits/ 64 <1800000000>;
+ opp-microvolt = <2>;
+ opp-supported-hw = <0x1>;
+ clock-latency-ns = <200000>;
+ opp-peak-kBps = <1272000>;
+ };
+ };
+
memory@80000000 {
device_type = "memory";
/* We expect the bootloader to fill in the size */
@@ -388,6 +428,18 @@ system-cache-controller@800000 {
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
};
+ qfprom@a6000 {
+ compatible = "qcom,ipq5424-qfprom", "qcom,qfprom";
+ reg = <0x0 0x000a6000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpu_speed_bin: cpu-speed-bin@234 {
+ reg = <0x234 0x1>;
+ bits = <0 8>;
+ };
+ };
+
tlmm: pinctrl@1000000 {
compatible = "qcom,ipq5424-tlmm";
reg = <0 0x01000000 0 0x300000>;
@@ -730,6 +782,15 @@ frame@f42d000 {
};
};
+ apss_clk: clock@fa80000 {
+ compatible = "qcom,ipq5424-apss-clk";
+ reg = <0x0 0x0fa80000 0x0 0x20000>;
+ clocks = <&xo_board>, <&gcc GPLL0>;
+ clock-names = "xo", "clk_ref";
+ #clock-cells = <1>;
+ #interconnect-cells = <1>;
+ };
+
pcie3: pcie@40000000 {
compatible = "qcom,pcie-ipq5424", "qcom,pcie-ipq9574";
reg = <0x0 0x40000000 0x0 0xf1c>,
--
2.34.1
next prev parent reply other threads:[~2025-07-30 8:14 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-07-30 8:13 [PATCH v4 0/4] Enable cpufreq for IPQ5424 Varadarajan Narayanan
2025-07-30 8:13 ` [PATCH v4 1/4] dt-bindings: clock: ipq5424-apss-clk: Add ipq5424 apss clock controller Varadarajan Narayanan
2025-07-30 9:02 ` Krzysztof Kozlowski
2025-07-30 9:22 ` Sricharan Ramabadhran
2025-07-30 9:36 ` Krzysztof Kozlowski
2025-07-30 10:32 ` Sricharan Ramabadhran
2025-08-01 5:58 ` Md Sadre Alam
2025-07-30 8:13 ` [PATCH v4 2/4] clk: qcom: apss-ipq5424: " Varadarajan Narayanan
2025-07-30 9:39 ` Konrad Dybcio
2025-07-30 8:13 ` [PATCH v4 3/4] cpufreq: qcom-nvmem: Enable cpufreq for ipq5424 Varadarajan Narayanan
2025-07-30 8:28 ` Viresh Kumar
2025-07-30 8:38 ` Konrad Dybcio
2025-07-30 8:13 ` Varadarajan Narayanan [this message]
2025-07-30 12:49 ` [PATCH v4 4/4] arm64: dts: qcom: ipq5424: Enable cpufreq Konrad Dybcio
2025-07-31 8:20 ` Varadarajan Narayanan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250730081316.547796-5-quic_varada@quicinc.com \
--to=quic_varada@quicinc.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=djakov@kernel.org \
--cc=ilia.lin@kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=quic_mdalam@quicinc.com \
--cc=quic_srichara@quicinc.com \
--cc=rafael@kernel.org \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).