linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Daniel Lezcano <daniel.lezcano@linaro.org>
To: daniel.lezcano@linaro.org, tglx@linutronix.de
Cc: S32@nxp.com, linux-kernel@vger.kernel.org,
	ghennadi.procopciuc@oss.nxp.com
Subject: [PATCH v2 18/20] clocksource/drivers/vf-pit: Rename the VF PIT to NXP PIT
Date: Wed, 30 Jul 2025 10:27:20 +0200	[thread overview]
Message-ID: <20250730082725.183133-19-daniel.lezcano@linaro.org> (raw)
In-Reply-To: <20250730082725.183133-1-daniel.lezcano@linaro.org>

The PIT acronym stands for Periodic Interrupt Timer which is found on
different NXP platforms not only on the Vybrid Family. Change the name
to be more generic for the NXP platforms in general. That will be
consistent with the NXP STM driver naming convention.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/Kconfig                             | 9 ++++++---
 drivers/clocksource/Makefile                            | 2 +-
 drivers/clocksource/{timer-vf-pit.c => timer-nxp-pit.c} | 0
 3 files changed, 7 insertions(+), 4 deletions(-)
 rename drivers/clocksource/{timer-vf-pit.c => timer-nxp-pit.c} (100%)

diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 6f7d371904df..0fd662f67d29 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -474,11 +474,14 @@ config FSL_FTM_TIMER
 	help
 	  Support for Freescale FlexTimer Module (FTM) timer.
 
-config VF_PIT_TIMER
-	bool "Vybrid Family Programmable timer" if COMPILE_TEST
+config NXP_PIT_TIMER
+	bool "NXP Periodic Interrupt Timer" if COMPILE_TEST
 	select CLKSRC_MMIO
 	help
-	  Support for Periodic Interrupt Timer on Freescale Vybrid Family SoCs.
+	  Support for Periodic Interrupt Timer on Freescale / NXP
+	  SoCs. This periodic timer is found on the Vybrid Family and
+	  the Automotive S32G2/3 platforms. It contains 4 channels
+	  where two can be coupled to form a 64 bits channel.
 
 config SYS_SUPPORTS_SH_CMT
 	bool
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 205bf3b0a8f3..77a0f08eb43b 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -49,7 +49,7 @@ obj-$(CONFIG_CLKSRC_LPC32XX)	+= timer-lpc32xx.o
 obj-$(CONFIG_CLKSRC_MPS2)	+= mps2-timer.o
 obj-$(CONFIG_CLKSRC_SAMSUNG_PWM)	+= samsung_pwm_timer.o
 obj-$(CONFIG_FSL_FTM_TIMER)	+= timer-fsl-ftm.o
-obj-$(CONFIG_VF_PIT_TIMER)	+= timer-vf-pit.o
+obj-$(CONFIG_NXP_PIT_TIMER)	+= timer-nxp-pit.o
 obj-$(CONFIG_CLKSRC_QCOM)	+= timer-qcom.o
 obj-$(CONFIG_MTK_TIMER)		+= timer-mediatek.o
 obj-$(CONFIG_MTK_CPUX_TIMER)	+= timer-mediatek-cpux.o
diff --git a/drivers/clocksource/timer-vf-pit.c b/drivers/clocksource/timer-nxp-pit.c
similarity index 100%
rename from drivers/clocksource/timer-vf-pit.c
rename to drivers/clocksource/timer-nxp-pit.c
-- 
2.43.0


  parent reply	other threads:[~2025-07-30  8:28 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-07-30  8:27 [PATCH v2 00/20] Add support for the NXP automotive S32G PIT Daniel Lezcano
2025-07-30  8:27 ` [PATCH v2 01/20] clocksource/drivers/vf-pit: Replace raw_readl/writel to reald/writel Daniel Lezcano
2025-07-30  8:27 ` [PATCH v2 02/20] clocksource/drivers/vf-pit: Add COMPILE_TEST option Daniel Lezcano
2025-07-30  8:27 ` [PATCH v2 03/20] clocksource/drivers/vf-pit: Set the scene for multiple timers Daniel Lezcano
2025-07-30  8:27 ` [PATCH v2 04/20] clocksource/drivers/vf-pit: Rework the base address usage Daniel Lezcano
2025-07-30  8:27 ` [PATCH v2 05/20] clocksource/drivers/vf-pit: Pass the cpu number as parameter Daniel Lezcano
2025-07-30  8:27 ` [PATCH v2 06/20] clocksource/drivers/vf-pit: Encapsulate the initialization of the cycles_per_jiffy Daniel Lezcano
2025-07-30  8:27 ` [PATCH v2 07/20] clocksource/drivers/vf-pit: Allocate the struct timer at init time Daniel Lezcano
2025-08-01  7:33   ` Ghennadi Procopciuc
2025-08-04  9:12     ` Daniel Lezcano
2025-08-04 10:02       ` Ghennadi Procopciuc
2025-07-30  8:27 ` [PATCH v2 08/20] clocksource/drivers/vf-pit: Convert raw values to BIT macros Daniel Lezcano
2025-07-30  8:27 ` [PATCH v2 09/20] clocksource/drivers/vf-pit: Register the clocksource from the driver Daniel Lezcano
2025-07-30  8:27 ` [PATCH v2 10/20] clocksource/drivers/vf-pit: Encapsulate the macros Daniel Lezcano
2025-08-01  7:33   ` Ghennadi Procopciuc
2025-07-30  8:27 ` [PATCH v2 11/20] clocksource/drivers/vf-pit: Encapsulate the PTLCVAL macro Daniel Lezcano
2025-08-01  7:34   ` Ghennadi Procopciuc
2025-07-30  8:27 ` [PATCH v2 12/20] clocksource/drivers/vf-pit: Use the node name for the interrupt and timer names Daniel Lezcano
2025-07-30  8:27 ` [PATCH v2 13/20] clocksource/drivers/vf-pit: Encapsulate clocksource enable / disable Daniel Lezcano
2025-07-30  8:27 ` [PATCH v2 14/20] clocksource/drivers/vf-pit: Enable and disable module on error Daniel Lezcano
2025-07-30  8:27 ` [PATCH v2 15/20] clocksource/drivers/vf-pit: Encapsulate set counter function Daniel Lezcano
2025-07-30  8:27 ` [PATCH v2 16/20] clocksource/drivers/vf-pit: Consolidate calls to pit_*_disable/enable Daniel Lezcano
2025-07-30  8:27 ` [PATCH v2 17/20] clocksource/drivers/vf-pit: Unify the function name for irq ack Daniel Lezcano
2025-08-01  7:34   ` Ghennadi Procopciuc
2025-07-30  8:27 ` Daniel Lezcano [this message]
2025-08-01  7:35   ` [PATCH v2 18/20] clocksource/drivers/vf-pit: Rename the VF PIT to NXP PIT Ghennadi Procopciuc
2025-08-01  8:48     ` Daniel Lezcano
2025-07-30  8:27 ` [PATCH v2 19/20] dt: bindings: fsl,vf610-pit: Add compatible for s32g2 and s32g3 Daniel Lezcano
2025-07-30 23:36   ` Rob Herring
2025-07-31  7:41     ` Daniel Lezcano
2025-07-31  7:50       ` Krzysztof Kozlowski
2025-07-31  8:24         ` Daniel Lezcano
2025-07-30  8:27 ` [PATCH v2 20/20] clocksource/drivers/nxp-pit: Add NXP Automotive s32g2 / s32g3 support Daniel Lezcano
2025-08-01  7:36   ` Ghennadi Procopciuc

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250730082725.183133-19-daniel.lezcano@linaro.org \
    --to=daniel.lezcano@linaro.org \
    --cc=S32@nxp.com \
    --cc=ghennadi.procopciuc@oss.nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).