* [PATCH RESEND v4 1/3] dt-bindings: vendor-prefixes: Add Flipkart
[not found] <20250811-rimob-initial-devicetree-v4-0-b3194f14aa33@protonmail.com>
@ 2025-08-11 21:08 ` Cristian Cozzolino via B4 Relay
2025-08-11 21:08 ` [PATCH RESEND v4 2/3] dt-bindings: arm: qcom: Add Billion Capture+ Cristian Cozzolino via B4 Relay
` (3 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Cristian Cozzolino via B4 Relay @ 2025-08-11 21:08 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Bjorn Andersson,
Konrad Dybcio
Cc: devicetree, linux-kernel, linux-arm-msm,
~postmarketos/upstreaming, phone-devel, Cristian Cozzolino
From: Cristian Cozzolino <cristian_ci@protonmail.com>
Add Flipkart to the vendor prefixes.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Cristian Cozzolino <cristian_ci@protonmail.com>
---
Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 86f6a19b28ae217643bf7a63a471f74819d18238..1516d670e3ac81e3e00fb687cda64d50eb3e2049 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -535,6 +535,8 @@ patternProperties:
description: Foxconn Industrial Internet
"^firefly,.*":
description: Firefly
+ "^flipkart,.*":
+ description: Flipkart Inc.
"^focaltech,.*":
description: FocalTech Systems Co.,Ltd
"^forlinx,.*":
--
2.49.0
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH RESEND v4 2/3] dt-bindings: arm: qcom: Add Billion Capture+
[not found] <20250811-rimob-initial-devicetree-v4-0-b3194f14aa33@protonmail.com>
2025-08-11 21:08 ` [PATCH RESEND v4 1/3] dt-bindings: vendor-prefixes: Add Flipkart Cristian Cozzolino via B4 Relay
@ 2025-08-11 21:08 ` Cristian Cozzolino via B4 Relay
2025-08-11 21:08 ` [PATCH RESEND v4 3/3] arm64: dts: qcom: msm8953: Add device tree for " Cristian Cozzolino via B4 Relay
` (2 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Cristian Cozzolino via B4 Relay @ 2025-08-11 21:08 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Bjorn Andersson,
Konrad Dybcio
Cc: devicetree, linux-kernel, linux-arm-msm,
~postmarketos/upstreaming, phone-devel, Cristian Cozzolino
From: Cristian Cozzolino <cristian_ci@protonmail.com>
Billion Capture+ (flipkart,rimob) is a smartphone based on Qualcomm
Snapdragon 625 (MSM8953).
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Cristian Cozzolino <cristian_ci@protonmail.com>
---
Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index 618a87693ac1dc32b40a2201bc219a4f12e9f3e8..dbe605557af82c2382702011276e920ea18d3bb8 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -274,6 +274,7 @@ properties:
- items:
- enum:
+ - flipkart,rimob
- motorola,potter
- xiaomi,daisy
- xiaomi,mido
--
2.49.0
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH RESEND v4 3/3] arm64: dts: qcom: msm8953: Add device tree for Billion Capture+
[not found] <20250811-rimob-initial-devicetree-v4-0-b3194f14aa33@protonmail.com>
2025-08-11 21:08 ` [PATCH RESEND v4 1/3] dt-bindings: vendor-prefixes: Add Flipkart Cristian Cozzolino via B4 Relay
2025-08-11 21:08 ` [PATCH RESEND v4 2/3] dt-bindings: arm: qcom: Add Billion Capture+ Cristian Cozzolino via B4 Relay
@ 2025-08-11 21:08 ` Cristian Cozzolino via B4 Relay
2025-08-12 10:51 ` Dmitry Baryshkov
2025-08-12 12:12 ` [PATCH RESEND v4 0/3] Add initial " Rob Herring (Arm)
2025-09-01 19:45 ` Bjorn Andersson
4 siblings, 1 reply; 6+ messages in thread
From: Cristian Cozzolino via B4 Relay @ 2025-08-11 21:08 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Bjorn Andersson,
Konrad Dybcio
Cc: devicetree, linux-kernel, linux-arm-msm,
~postmarketos/upstreaming, phone-devel, Cristian Cozzolino,
Konrad Dybcio
From: Cristian Cozzolino <cristian_ci@protonmail.com>
Billion Capture+ (flipkart,rimob) is a smartphone released in 2017, based
on Snapdragon 625 (MSM8953) SoC.
Add a device tree with initial support for:
- GPIO keys
- SDHCI (internal and external storage)
- USB Device Mode
- Regulators
- Simple framebuffer
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Cristian Cozzolino <cristian_ci@protonmail.com>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../arm64/boot/dts/qcom/msm8953-flipkart-rimob.dts | 255 +++++++++++++++++++++
2 files changed, 256 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 140b0b2abfb555b8ef61bd9ed0217d8997800809..af3757ca017b6e3d8c579e43f647a71fc64c62b3 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -70,6 +70,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8939-samsung-a7.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8939-sony-xperia-kanuti-tulip.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8939-wingtech-wt82918.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8939-wingtech-wt82918hd.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8953-flipkart-rimob.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8953-motorola-potter.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-daisy.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-mido.dtb
diff --git a/arch/arm64/boot/dts/qcom/msm8953-flipkart-rimob.dts b/arch/arm64/boot/dts/qcom/msm8953-flipkart-rimob.dts
new file mode 100644
index 0000000000000000000000000000000000000000..ef4faf7631327ba3f7d954cef57bb1ebfc09a1cc
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8953-flipkart-rimob.dts
@@ -0,0 +1,255 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025, Cristian Cozzolino
+ */
+/dts-v1/;
+
+#include "msm8953.dtsi"
+#include "pm8953.dtsi"
+#include "pmi8950.dtsi"
+
+/delete-node/ &cont_splash_mem;
+/delete-node/ &qseecom_mem;
+
+/ {
+ model = "Billion Capture+";
+ compatible = "flipkart,rimob", "qcom,msm8953";
+ chassis-type = "handset";
+ qcom,msm-id = <293 0>;
+ qcom,board-id = <0x340008 0>;
+
+ chosen {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ framebuffer@90001000 {
+ compatible = "simple-framebuffer";
+ reg = <0 0x90001000 0 (1920 * 1080 * 3)>;
+
+ width = <1080>;
+ height = <1920>;
+ stride = <(1080 * 3)>;
+ format = "r8g8b8";
+
+ power-domains = <&gcc MDSS_GDSC>;
+
+ clocks = <&gcc GCC_MDSS_AHB_CLK>,
+ <&gcc GCC_MDSS_AXI_CLK>,
+ <&gcc GCC_MDSS_VSYNC_CLK>,
+ <&gcc GCC_MDSS_MDP_CLK>,
+ <&gcc GCC_MDSS_BYTE0_CLK>,
+ <&gcc GCC_MDSS_PCLK0_CLK>,
+ <&gcc GCC_MDSS_ESC0_CLK>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&gpio_key_default>;
+ pinctrl-names = "default";
+
+ key-volume-up {
+ label = "Volume Up";
+ gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ debounce-interval = <15>;
+ };
+ };
+
+ reserved-memory {
+ qseecom_mem: qseecom@84a00000 {
+ reg = <0x0 0x84a00000 0x0 0x1900000>;
+ no-map;
+ };
+
+ cont_splash_mem: cont-splash@90001000 {
+ reg = <0x0 0x90001000 0x0 (1080 * 1920 * 3)>;
+ no-map;
+ };
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+
+&hsusb_phy {
+ vdd-supply = <&pm8953_l3>;
+ vdda-pll-supply = <&pm8953_l7>;
+ vdda-phy-dpdm-supply = <&pm8953_l13>;
+
+ status = "okay";
+};
+
+&pm8953_resin {
+ linux,code = <KEY_VOLUMEDOWN>;
+ status = "okay";
+};
+
+&rpm_requests {
+ regulators {
+ compatible = "qcom,rpm-pm8953-regulators";
+ vdd_s1-supply = <&vph_pwr>;
+ vdd_s2-supply = <&vph_pwr>;
+ vdd_s3-supply = <&vph_pwr>;
+ vdd_s4-supply = <&vph_pwr>;
+ vdd_s5-supply = <&vph_pwr>;
+ vdd_s6-supply = <&vph_pwr>;
+ vdd_s7-supply = <&vph_pwr>;
+ vdd_l1-supply = <&pm8953_s3>;
+ vdd_l2_l3-supply = <&pm8953_s3>;
+ vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>;
+ vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>;
+ vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>;
+ vdd_l23-supply = <&pm8953_s3>;
+
+ pm8953_s1: s1 {
+ regulator-min-microvolt = <870000>;
+ regulator-max-microvolt = <1156000>;
+ };
+
+ pm8953_s3: s3 {
+ regulator-min-microvolt = <1224000>;
+ regulator-max-microvolt = <1224000>;
+ };
+
+ pm8953_s4: s4 {
+ regulator-min-microvolt = <1900000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ pm8953_l1: l1 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ pm8953_l2: l2 {
+ regulator-min-microvolt = <975000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ pm8953_l3: l3 {
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <925000>;
+ };
+
+ pm8953_l5: l5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-allow-set-load;
+ };
+
+ pm8953_l6: l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8953_l7: l7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1900000>;
+ };
+
+ pm8953_l8: l8 {
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-allow-set-load;
+ };
+
+ pm8953_l9: l9 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ pm8953_l10: l10 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ pm8953_l11: l11 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-allow-set-load;
+ };
+
+ pm8953_l12: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-allow-set-load;
+ };
+
+ pm8953_l13: l13 {
+ regulator-min-microvolt = <3125000>;
+ regulator-max-microvolt = <3125000>;
+ };
+
+ pm8953_l16: l16 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8953_l17: l17 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ pm8953_l19: l19 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1350000>;
+ };
+
+ pm8953_l22: l22 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ pm8953_l23: l23 {
+ regulator-min-microvolt = <975000>;
+ regulator-max-microvolt = <1225000>;
+ };
+ };
+};
+
+&sdhc_1 {
+ vmmc-supply = <&pm8953_l8>;
+ vqmmc-supply = <&pm8953_l5>;
+
+ status = "okay";
+};
+
+&sdhc_2 {
+ vmmc-supply = <&pm8953_l11>;
+ vqmmc-supply = <&pm8953_l12>;
+
+ cd-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
+ pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
+ pinctrl-names = "default", "sleep";
+
+ status = "okay";
+};
+
+&tlmm {
+ gpio-reserved-ranges = <0 4>, <135 4>;
+
+ gpio_key_default: gpio-key-default-state {
+ pins = "gpio85";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+};
+
+&usb3 {
+ status = "okay";
+};
+
+&usb3_dwc3 {
+ dr_mode = "peripheral";
+};
--
2.49.0
^ permalink raw reply related [flat|nested] 6+ messages in thread* Re: [PATCH RESEND v4 3/3] arm64: dts: qcom: msm8953: Add device tree for Billion Capture+
2025-08-11 21:08 ` [PATCH RESEND v4 3/3] arm64: dts: qcom: msm8953: Add device tree for " Cristian Cozzolino via B4 Relay
@ 2025-08-12 10:51 ` Dmitry Baryshkov
0 siblings, 0 replies; 6+ messages in thread
From: Dmitry Baryshkov @ 2025-08-12 10:51 UTC (permalink / raw)
To: cristian_ci
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Bjorn Andersson,
Konrad Dybcio, devicetree, linux-kernel, linux-arm-msm,
~postmarketos/upstreaming, phone-devel, Konrad Dybcio
On Mon, Aug 11, 2025 at 11:08:11PM +0200, Cristian Cozzolino via B4 Relay wrote:
> From: Cristian Cozzolino <cristian_ci@protonmail.com>
>
> Billion Capture+ (flipkart,rimob) is a smartphone released in 2017, based
> on Snapdragon 625 (MSM8953) SoC.
>
> Add a device tree with initial support for:
>
> - GPIO keys
> - SDHCI (internal and external storage)
> - USB Device Mode
> - Regulators
> - Simple framebuffer
>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> Signed-off-by: Cristian Cozzolino <cristian_ci@protonmail.com>
> ---
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> .../arm64/boot/dts/qcom/msm8953-flipkart-rimob.dts | 255 +++++++++++++++++++++
> 2 files changed, 256 insertions(+)
>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH RESEND v4 0/3] Add initial device tree for Billion Capture+
[not found] <20250811-rimob-initial-devicetree-v4-0-b3194f14aa33@protonmail.com>
` (2 preceding siblings ...)
2025-08-11 21:08 ` [PATCH RESEND v4 3/3] arm64: dts: qcom: msm8953: Add device tree for " Cristian Cozzolino via B4 Relay
@ 2025-08-12 12:12 ` Rob Herring (Arm)
2025-09-01 19:45 ` Bjorn Andersson
4 siblings, 0 replies; 6+ messages in thread
From: Rob Herring (Arm) @ 2025-08-12 12:12 UTC (permalink / raw)
To: Cristian Cozzolino
Cc: ~postmarketos/upstreaming, devicetree, phone-devel, Konrad Dybcio,
Bjorn Andersson, Conor Dooley, Krzysztof Kozlowski, linux-arm-msm,
linux-kernel, Konrad Dybcio
On Mon, 11 Aug 2025 23:08:08 +0200, Cristian Cozzolino wrote:
> Billion Capture+ is a handset using the MSM8953 SoC released in 2017
> and sold by Flipkart.
>
> Add a device tree with initial support for:
>
> - GPIO keys
> - SDHCI (internal and external storage)
> - USB Device Mode
> - Regulators
> - Simple framebuffer
>
> Signed-off-by: Cristian Cozzolino <cristian_ci@protonmail.com>
> ---
> Changes in v4:
> - pick up tags (Rob);
> - Link to v3: https://lore.kernel.org/r/20250626-rimob-initial-devicetree-v3-0-4017ac9fd93d@protonmail.com
>
> Changes in v3:
> - (patch 3/3): pick up tag (Konrad);
> - Link to v2: https://lore.kernel.org/r/20250624-rimob-initial-devicetree-v2-0-34f6045ebc30@protonmail.com
>
> Changes in v2:
> - (patch 3/3):
> - add unit address and label to qseecom (Luca);
> - reorder properties alphabetically in gpio-keys node (Konrad);
> - fix hex values in reg address and size cells: from 0x00 to 0x0 (Konrad);
> - add regulator-allow-set-load property to regulators supplying sdhc1/sdhc2.
> - Link to v1: https://lore.kernel.org/r/20250620-rimob-initial-devicetree-v1-0-8e667ea21f82@protonmail.com
>
> ---
> Cristian Cozzolino (3):
> dt-bindings: vendor-prefixes: Add Flipkart
> dt-bindings: arm: qcom: Add Billion Capture+
> arm64: dts: qcom: msm8953: Add device tree for Billion Capture+
>
> Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
> .../devicetree/bindings/vendor-prefixes.yaml | 2 +
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> .../arm64/boot/dts/qcom/msm8953-flipkart-rimob.dts | 255 +++++++++++++++++++++
> 4 files changed, 259 insertions(+)
> ---
> base-commit: 0ff41df1cb268fc69e703a08a57ee14ae967d0ca
> change-id: 20250620-rimob-initial-devicetree-da86a5bffc8b
>
> Best regards,
> --
> Cristian Cozzolino <cristian_ci@protonmail.com>
>
>
>
My bot found new DTB warnings on the .dts files added or changed in this
series.
Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.
If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:
pip3 install dtschema --upgrade
This patch series was applied (using b4) to base:
Base: using specified base-commit 0ff41df1cb268fc69e703a08a57ee14ae967d0ca
If this is not the correct base, please add 'base-commit' tag
(or use b4 which does this automatically)
New warnings running 'make CHECK_DTBS=y for arch/arm64/boot/dts/qcom/' for 20250811-rimob-initial-devicetree-v4-0-b3194f14aa33@protonmail.com:
arch/arm64/boot/dts/qcom/msm8953-flipkart-rimob.dtb: gpu@1c00000 (qcom,adreno-506.0): clock-names:5: 'alwayson' is not one of ['core', 'iface', 'mem', 'mem_iface', 'alt_mem_iface', 'gfx3d', 'rbbmtimer', 'rbcpr']
from schema $id: http://devicetree.org/schemas/display/msm/gpu.yaml#
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH RESEND v4 0/3] Add initial device tree for Billion Capture+
[not found] <20250811-rimob-initial-devicetree-v4-0-b3194f14aa33@protonmail.com>
` (3 preceding siblings ...)
2025-08-12 12:12 ` [PATCH RESEND v4 0/3] Add initial " Rob Herring (Arm)
@ 2025-09-01 19:45 ` Bjorn Andersson
4 siblings, 0 replies; 6+ messages in thread
From: Bjorn Andersson @ 2025-09-01 19:45 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Konrad Dybcio,
Cristian Cozzolino
Cc: devicetree, linux-kernel, linux-arm-msm,
~postmarketos/upstreaming, phone-devel, Konrad Dybcio
On Mon, 11 Aug 2025 23:08:08 +0200, Cristian Cozzolino wrote:
> Billion Capture+ is a handset using the MSM8953 SoC released in 2017
> and sold by Flipkart.
>
> Add a device tree with initial support for:
>
> - GPIO keys
> - SDHCI (internal and external storage)
> - USB Device Mode
> - Regulators
> - Simple framebuffer
>
> [...]
Applied, thanks!
[1/3] dt-bindings: vendor-prefixes: Add Flipkart
commit: 922e16d1770624e25e2c751a257c88690f121b1c
[2/3] dt-bindings: arm: qcom: Add Billion Capture+
commit: ba4857cc649a7a113252e849fbf12bc282399480
[3/3] arm64: dts: qcom: msm8953: Add device tree for Billion Capture+
commit: a2dd7cf8477e825b8028b4e36c787cee0f00a033
Best regards,
--
Bjorn Andersson <andersson@kernel.org>
^ permalink raw reply [flat|nested] 6+ messages in thread