From: Yusuf Alper Bilgin <y.alperbilgin@gmail.com>
To: "Lars-Peter Clausen" <lars@metafoo.de>,
"Michael Hennerich" <Michael.Hennerich@analog.com>,
"Jonathan Cameron" <jic23@kernel.org>,
"David Lechner" <dlechner@baylibre.com>,
"Nuno Sá" <nuno.sa@analog.com>,
"Andy Shevchenko" <andy@kernel.org>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Liam Beguin" <liambeguin@gmail.com>
Cc: Michael Hennerich <michael.hennerich@analog.com>,
linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Yusuf Alper Bilgin <y.alperbilgin@gmail.com>
Subject: [PATCH 2/3] iio: adc: ltc2497: add support for LTC2495
Date: Tue, 12 Aug 2025 19:04:11 +0200 [thread overview]
Message-ID: <20250812-ltc2495-v1-2-7bf4c6feec2e@gmail.com> (raw)
In-Reply-To: <20250812-ltc2495-v1-0-7bf4c6feec2e@gmail.com>
This updates the LTC2497 driver to also support the LTC2495.
Signed-off-by: Yusuf Alper Bilgin <y.alperbilgin@gmail.com>
---
drivers/iio/adc/ltc2497-core.c | 20 +++++++++-----------
drivers/iio/adc/ltc2497.c | 7 +++++++
drivers/iio/adc/ltc2497.h | 4 +---
3 files changed, 17 insertions(+), 14 deletions(-)
diff --git a/drivers/iio/adc/ltc2497-core.c b/drivers/iio/adc/ltc2497-core.c
index 2dc5c704426949a4ec62c42591d6c2c40ffb79cc..400f4fe5af30e8e16b75506726235f10f2a4237f 100644
--- a/drivers/iio/adc/ltc2497-core.c
+++ b/drivers/iio/adc/ltc2497-core.c
@@ -15,9 +15,12 @@
#include "ltc2497.h"
-#define LTC2497_SGL BIT(4)
-#define LTC2497_DIFF 0
-#define LTC2497_SIGN BIT(3)
+#define LTC2497_CONFIG_DEFAULT LTC2497_ENABLE
+#define LTC2497_CONVERSION_TIME_MS 150ULL
+
+#define LTC2497_SGL BIT(4)
+#define LTC2497_DIFF 0
+#define LTC2497_SIGN BIT(3)
static int ltc2497core_wait_conv(struct ltc2497core_driverdata *ddata)
{
@@ -26,20 +29,15 @@ static int ltc2497core_wait_conv(struct ltc2497core_driverdata *ddata)
time_elapsed = ktime_ms_delta(ktime_get(), ddata->time_prev);
if (time_elapsed < LTC2497_CONVERSION_TIME_MS) {
- /* delay if conversion time not passed
- * since last read or write
- */
- if (msleep_interruptible(
- LTC2497_CONVERSION_TIME_MS - time_elapsed))
+ /* delay if conversion time not passed since last read or write */
+ if (msleep_interruptible(LTC2497_CONVERSION_TIME_MS - time_elapsed))
return -ERESTARTSYS;
return 0;
}
if (time_elapsed - LTC2497_CONVERSION_TIME_MS <= 0) {
- /* We're in automatic mode -
- * so the last reading is still not outdated
- */
+ /* We're in automatic mode - so the last reading is still not outdated */
return 0;
}
diff --git a/drivers/iio/adc/ltc2497.c b/drivers/iio/adc/ltc2497.c
index eb9d521e86e54def0493ea0e81f63b37900c56a5..8f4665547b5b0d32084599f8557c40102c37a4ce 100644
--- a/drivers/iio/adc/ltc2497.c
+++ b/drivers/iio/adc/ltc2497.c
@@ -19,6 +19,7 @@
#include "ltc2497.h"
enum ltc2497_chip_type {
+ TYPE_LTC2495,
TYPE_LTC2497,
TYPE_LTC2499,
};
@@ -131,6 +132,10 @@ static void ltc2497_remove(struct i2c_client *client)
}
static const struct ltc2497_chip_info ltc2497_info[] = {
+ [TYPE_LTC2495] = {
+ .resolution = 16,
+ .name = "ltc2495",
+ },
[TYPE_LTC2497] = {
.resolution = 16,
.name = NULL,
@@ -142,6 +147,7 @@ static const struct ltc2497_chip_info ltc2497_info[] = {
};
static const struct i2c_device_id ltc2497_id[] = {
+ { "ltc2495", (kernel_ulong_t)<c2497_info[TYPE_LTC2495] },
{ "ltc2497", (kernel_ulong_t)<c2497_info[TYPE_LTC2497] },
{ "ltc2499", (kernel_ulong_t)<c2497_info[TYPE_LTC2499] },
{ }
@@ -149,6 +155,7 @@ static const struct i2c_device_id ltc2497_id[] = {
MODULE_DEVICE_TABLE(i2c, ltc2497_id);
static const struct of_device_id ltc2497_of_match[] = {
+ { .compatible = "lltc,ltc2495", .data = <c2497_info[TYPE_LTC2495] },
{ .compatible = "lltc,ltc2497", .data = <c2497_info[TYPE_LTC2497] },
{ .compatible = "lltc,ltc2499", .data = <c2497_info[TYPE_LTC2499] },
{ }
diff --git a/drivers/iio/adc/ltc2497.h b/drivers/iio/adc/ltc2497.h
index 64e81c95a3dd05911b6717c09ac0560c9f47f304..f2139f260c3fe4e8772c6db9c46331de775dcd5c 100644
--- a/drivers/iio/adc/ltc2497.h
+++ b/drivers/iio/adc/ltc2497.h
@@ -1,8 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0-only */
-#define LTC2497_ENABLE 0xA0
-#define LTC2497_CONFIG_DEFAULT LTC2497_ENABLE
-#define LTC2497_CONVERSION_TIME_MS 150ULL
+#define LTC2497_ENABLE 0xA0
struct ltc2497_chip_info {
u32 resolution;
--
2.43.0
next prev parent reply other threads:[~2025-08-12 17:09 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-12 17:04 [PATCH 0/3] Add LTC2495 support Yusuf Alper Bilgin
2025-08-12 17:04 ` [PATCH 1/3] dt-bindings: iio: adc: ltc2497: add docs for LTC2495 Yusuf Alper Bilgin
2025-08-12 18:00 ` Krzysztof Kozlowski
2025-08-13 8:44 ` Yusuf Alper Bilgin
2025-08-16 10:23 ` Jonathan Cameron
2025-08-18 16:26 ` Alper Bilgin
2025-08-17 7:11 ` Krzysztof Kozlowski
2025-08-12 17:04 ` Yusuf Alper Bilgin [this message]
2025-08-13 10:18 ` [PATCH 2/3] iio: adc: ltc2497: add support " Andy Shevchenko
2025-08-12 17:04 ` [PATCH 3/3] iio: adc: ltc2497: add temperature sensor support Yusuf Alper Bilgin
2025-08-13 10:32 ` Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250812-ltc2495-v1-2-7bf4c6feec2e@gmail.com \
--to=y.alperbilgin@gmail.com \
--cc=Michael.Hennerich@analog.com \
--cc=andy@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dlechner@baylibre.com \
--cc=jic23@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=lars@metafoo.de \
--cc=liambeguin@gmail.com \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nuno.sa@analog.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).