* [PATCH v2] HID: lg-g15 - Add support for Logitech G13.
@ 2025-08-12 6:53 Leo L. Schwab
2025-08-12 11:24 ` Markus Elfring
` (4 more replies)
0 siblings, 5 replies; 7+ messages in thread
From: Leo L. Schwab @ 2025-08-12 6:53 UTC (permalink / raw)
To: Hans de Goede
Cc: Kate Hsuan, Leo L. Schwab, Jiri Kosina, Benjamin Tissoires,
linux-input, linux-kernel
The Logitech G13 is a gaming keypad with general-purpose macro keys,
four LED-backlit macro preset keys, five "menu" keys, backlight toggle
key, an analog thumbstick, RGB LED backlight, and a monochrome LCD
display.
Supports input event generation for all keys and the thumbstick, and
exposes all LEDs.
Signed-off-by: Leo L. Schwab <ewhac@ewhac.org>
---
Changes in v2:
- Add `#ifdef CONFIG_LEDS_BRIGHTNESS_HW_CHANGED` bracket around new
code segment dependent on that feature (fixes test robot build
error).
- Use `guard(mutex)` construct in new code (existing code left
unmodified).
- Commit message revised.
drivers/hid/hid-ids.h | 1 +
drivers/hid/hid-lg-g15.c | 440 +++++++++++++++++++++++++++++++++++++--
2 files changed, 420 insertions(+), 21 deletions(-)
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 33cc5820f2be..7ed1e402b80a 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -870,6 +870,7 @@
#define USB_DEVICE_ID_LOGITECH_DUAL_ACTION 0xc216
#define USB_DEVICE_ID_LOGITECH_RUMBLEPAD2 0xc218
#define USB_DEVICE_ID_LOGITECH_RUMBLEPAD2_2 0xc219
+#define USB_DEVICE_ID_LOGITECH_G13 0xc21c
#define USB_DEVICE_ID_LOGITECH_G15_LCD 0xc222
#define USB_DEVICE_ID_LOGITECH_G11 0xc225
#define USB_DEVICE_ID_LOGITECH_G15_V2_LCD 0xc227
diff --git a/drivers/hid/hid-lg-g15.c b/drivers/hid/hid-lg-g15.c
index f8605656257b..1749d0b43967 100644
--- a/drivers/hid/hid-lg-g15.c
+++ b/drivers/hid/hid-lg-g15.c
@@ -26,7 +26,11 @@
#define LG_G510_FEATURE_BACKLIGHT_RGB 0x05
#define LG_G510_FEATURE_POWER_ON_RGB 0x06
+#define LG_G13_FEATURE_M_KEYS_LEDS 0x05
+#define LG_G13_FEATURE_BACKLIGHT_RGB 0x07
+
enum lg_g15_model {
+ LG_G13,
LG_G15,
LG_G15_V2,
LG_G510,
@@ -45,6 +49,12 @@ enum lg_g15_led_type {
LG_G15_LED_MAX
};
+struct g13_input_report {
+ u8 report_id; // 1
+ u8 joy_x, joy_y;
+ u8 keybits[5];
+};
+
struct lg_g15_led {
union {
struct led_classdev cdev;
@@ -63,12 +73,174 @@ struct lg_g15_data {
struct mutex mutex;
struct work_struct work;
struct input_dev *input;
+ struct input_dev *input_js; // joystick device for G13
struct hid_device *hdev;
enum lg_g15_model model;
struct lg_g15_led leds[LG_G15_LED_MAX];
bool game_mode_enabled;
};
+/********* G13 LED functions ***********/
+/*
+ * G13 retains no state across power cycles, and always powers up with the backlight on,
+ * color #5AFF6E, all macro key LEDs off.
+ */
+static int lg_g13_get_leds_state(struct lg_g15_data *g15)
+{
+ u8 * const tbuf = g15->transfer_buf;
+ int ret, high;
+
+ /* RGB backlight. */
+ ret = hid_hw_raw_request(g15->hdev, LG_G13_FEATURE_BACKLIGHT_RGB,
+ tbuf, 5,
+ HID_FEATURE_REPORT, HID_REQ_GET_REPORT);
+ if (ret != 5) {
+ hid_err(g15->hdev, "Error getting backlight brightness: %d\n", ret);
+ return (ret < 0) ? ret : -EIO;
+ }
+
+ /* Normalize RGB intensities against highest component. */
+ high = max3(tbuf[1], tbuf[2], tbuf[3]);
+ if (high) {
+ g15->leds[LG_G15_KBD_BRIGHTNESS].red =
+ DIV_ROUND_CLOSEST(tbuf[1] * 255, high);
+ g15->leds[LG_G15_KBD_BRIGHTNESS].green =
+ DIV_ROUND_CLOSEST(tbuf[2] * 255, high);
+ g15->leds[LG_G15_KBD_BRIGHTNESS].blue =
+ DIV_ROUND_CLOSEST(tbuf[3] * 255, high);
+ g15->leds[LG_G15_KBD_BRIGHTNESS].brightness = high;
+ } else {
+ g15->leds[LG_G15_KBD_BRIGHTNESS].red = 255;
+ g15->leds[LG_G15_KBD_BRIGHTNESS].green = 255;
+ g15->leds[LG_G15_KBD_BRIGHTNESS].blue = 255;
+ g15->leds[LG_G15_KBD_BRIGHTNESS].brightness = 0;
+ }
+
+ /* Macro LEDs. */
+ ret = hid_hw_raw_request(g15->hdev, LG_G13_FEATURE_M_KEYS_LEDS,
+ tbuf, 5,
+ HID_FEATURE_REPORT, HID_REQ_GET_REPORT);
+ if (ret != 5) {
+ hid_err(g15->hdev, "Error getting macro LED brightness: %d\n", ret);
+ return (ret < 0) ? ret : -EIO;
+ }
+
+ for (int i = LG_G15_MACRO_PRESET1; i < LG_G15_LED_MAX; ++i)
+ g15->leds[i].brightness = tbuf[1] & (1 << (i - LG_G15_MACRO_PRESET1));
+
+ return 0;
+}
+
+/* Must be called with g15->mutex locked */
+static int lg_g13_kbd_led_write(struct lg_g15_data *g15,
+ struct lg_g15_led *g15_led,
+ enum led_brightness brightness)
+{
+ struct mc_subled const * const subleds = g15_led->mcdev.subled_info;
+ u8 * const tbuf = g15->transfer_buf;
+ int ret;
+
+ led_mc_calc_color_components(&g15_led->mcdev, brightness);
+
+ tbuf[0] = 5;
+ tbuf[1] = subleds[0].brightness;
+ tbuf[2] = subleds[1].brightness;
+ tbuf[3] = subleds[2].brightness;
+ tbuf[4] = 0;
+
+ ret = hid_hw_raw_request(g15->hdev, LG_G13_FEATURE_BACKLIGHT_RGB,
+ tbuf, 5,
+ HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
+ if (ret == 5) {
+ g15_led->brightness = brightness;
+ ret = 0;
+ } else {
+ hid_err(g15->hdev, "Error setting backlight brightness: %d\n", ret);
+ ret = (ret < 0) ? ret : -EIO;
+ }
+
+ return ret;
+}
+
+static int lg_g13_kbd_led_set(struct led_classdev *led_cdev, enum led_brightness brightness)
+{
+ struct led_classdev_mc *mc = lcdev_to_mccdev(led_cdev);
+ struct lg_g15_led *g15_led =
+ container_of(mc, struct lg_g15_led, mcdev);
+ struct lg_g15_data *g15 = dev_get_drvdata(led_cdev->dev->parent);
+
+ /* Ignore LED off on unregister / keyboard unplug */
+ if (led_cdev->flags & LED_UNREGISTERING)
+ return 0;
+
+ guard(mutex)(&g15->mutex);
+ return lg_g13_kbd_led_write(g15, g15_led, brightness);
+}
+
+static enum led_brightness lg_g13_kbd_led_get(struct led_classdev *led_cdev)
+{
+ struct led_classdev_mc const * const mc = lcdev_to_mccdev(led_cdev);
+ struct lg_g15_led const *g15_led =
+ container_of(mc, struct lg_g15_led, mcdev);
+
+ return g15_led->brightness;
+}
+
+static int lg_g13_mkey_led_set(struct led_classdev *led_cdev, enum led_brightness brightness)
+{
+ struct lg_g15_led *g15_led =
+ container_of(led_cdev, struct lg_g15_led, cdev);
+ struct lg_g15_data *g15 = dev_get_drvdata(led_cdev->dev->parent);
+ int i, ret;
+ u8 * const tbuf = g15->transfer_buf;
+ u8 val, mask = 0;
+
+ /* Ignore LED off on unregister / keyboard unplug */
+ if (led_cdev->flags & LED_UNREGISTERING)
+ return 0;
+
+ guard(mutex)(&g15->mutex);
+
+ for (i = LG_G15_MACRO_PRESET1; i < LG_G15_LED_MAX; ++i) {
+ if (i == g15_led->led)
+ val = brightness;
+ else
+ val = g15->leds[i].brightness;
+
+ if (val)
+ mask |= 1 << (i - LG_G15_MACRO_PRESET1);
+ }
+
+ tbuf[0] = 5;
+ tbuf[1] = mask;
+ tbuf[2] =
+ tbuf[3] =
+ tbuf[4] = 0;
+
+ ret = hid_hw_raw_request(g15->hdev, LG_G13_FEATURE_M_KEYS_LEDS,
+ tbuf, 5,
+ HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
+ if (ret != 5) {
+ hid_err(g15->hdev, "Error setting LED brightness: %d\n", ret);
+ return (ret < 0) ? ret : -EIO;
+ }
+
+ g15_led->brightness = brightness;
+ return 0;
+}
+
+static enum led_brightness lg_g13_mkey_led_get(struct led_classdev *led_cdev)
+{
+ /*
+ * G13 doesn't change macro key LEDs behind our back, so they're
+ * whatever we last set them to.
+ */
+ struct lg_g15_led *g15_led =
+ container_of(led_cdev, struct lg_g15_led, cdev);
+
+ return g15_led->brightness;
+}
+
/******** G15 and G15 v2 LED functions ********/
static int lg_g15_update_led_brightness(struct lg_g15_data *g15)
@@ -390,6 +562,8 @@ static int lg_g15_get_initial_led_brightness(struct lg_g15_data *g15)
int ret;
switch (g15->model) {
+ case LG_G13:
+ return lg_g13_get_leds_state(g15);
case LG_G15:
case LG_G15_V2:
return lg_g15_update_led_brightness(g15);
@@ -417,6 +591,117 @@ static int lg_g15_get_initial_led_brightness(struct lg_g15_data *g15)
/******** Input functions ********/
+/**
+ * g13_input_report.keybits[] is not 32-bit aligned, so we can't use the bitops macros.
+ *
+ * @ary: Pointer to array of u8s
+ * @b: Bit index into ary, LSB first. Not range checked.
+ */
+#define TEST_BIT(ary, b) ((1 << ((b) & 7)) & (ary)[(b) >> 3])
+
+/* Table mapping keybits[] bit positions to event codes. */
+/* Note: Indices are discontinuous to aid readability. */
+static const u16 g13_keys_for_bits[] = {
+ /* Main keypad - keys G1 - G22 */
+ [0] = KEY_MACRO1,
+ [1] = KEY_MACRO2,
+ [2] = KEY_MACRO3,
+ [3] = KEY_MACRO4,
+ [4] = KEY_MACRO5,
+ [5] = KEY_MACRO6,
+ [6] = KEY_MACRO7,
+ [7] = KEY_MACRO8,
+ [8] = KEY_MACRO9,
+ [9] = KEY_MACRO10,
+ [10] = KEY_MACRO11,
+ [11] = KEY_MACRO12,
+ [12] = KEY_MACRO13,
+ [13] = KEY_MACRO14,
+ [14] = KEY_MACRO15,
+ [15] = KEY_MACRO16,
+ [16] = KEY_MACRO17,
+ [17] = KEY_MACRO18,
+ [18] = KEY_MACRO19,
+ [19] = KEY_MACRO20,
+ [20] = KEY_MACRO21,
+ [21] = KEY_MACRO22,
+
+ /* LCD menu buttons. */
+ [24] = KEY_KBD_LCD_MENU5, // "Next page" button
+ [25] = KEY_KBD_LCD_MENU1, // Left-most
+ [26] = KEY_KBD_LCD_MENU2,
+ [27] = KEY_KBD_LCD_MENU3,
+ [28] = KEY_KBD_LCD_MENU4, // Right-most
+
+ /* Macro preset and record buttons; have red LEDs under them. */
+ [29] = KEY_MACRO_PRESET1,
+ [30] = KEY_MACRO_PRESET2,
+ [31] = KEY_MACRO_PRESET3,
+ [32] = KEY_MACRO_RECORD_START,
+
+ /* 33-35 handled by joystick device. */
+
+ /* Backlight toggle. */
+ [37] = KEY_LIGHTS_TOGGLE,
+};
+
+static const u16 g13_keys_for_bits_js[] = {
+ /* Joystick buttons */
+ /* These keybits are at bit indices 33, 34, and 35. */
+ BTN_BASE, // Left side
+ BTN_BASE2, // Bottom side
+ BTN_THUMB, // Stick depress
+};
+
+static int lg_g13_event(struct lg_g15_data *g15, u8 const *data)
+{
+ struct g13_input_report const * const rep = (struct g13_input_report *) data;
+ int i, val;
+ bool hw_brightness_changed;
+
+ /*
+ * Main macropad and menu keys.
+ * Emit key events defined for each bit position.
+ */
+ for (i = 0; i < ARRAY_SIZE(g13_keys_for_bits); ++i) {
+ if (g13_keys_for_bits[i]) {
+ val = TEST_BIT(rep->keybits, i);
+ input_report_key(g15->input, g13_keys_for_bits[i], val);
+ }
+ }
+ input_sync(g15->input);
+
+ /*
+ * Joystick.
+ * Emit button and deflection events.
+ */
+ for (i = 0; i < ARRAY_SIZE(g13_keys_for_bits_js); ++i) {
+ if (g13_keys_for_bits_js[i]) {
+ val = TEST_BIT(rep->keybits, i + 33);
+ input_report_key(g15->input_js, g13_keys_for_bits_js[i], val);
+ }
+ }
+ input_report_abs(g15->input_js, ABS_X, rep->joy_x);
+ input_report_abs(g15->input_js, ABS_Y, rep->joy_y);
+ input_sync(g15->input_js);
+
+#ifdef CONFIG_LEDS_BRIGHTNESS_HW_CHANGED
+ /*
+ * Bit 23 of keybits[] reports the current backlight on/off state. If
+ * it has changed from the last cached value, apply an update.
+ */
+ hw_brightness_changed =
+ (!!TEST_BIT(rep->keybits, 23)) ^ (g15->leds[0].cdev.brightness_hw_changed > 0);
+ if (hw_brightness_changed) {
+ led_classdev_notify_brightness_hw_changed(
+ &g15->leds[0].cdev,
+ TEST_BIT(rep->keybits, 23) ? LED_FULL : LED_OFF);
+ }
+#endif
+
+ return 0;
+}
+
/* On the G15 Mark I Logitech has been quite creative with which bit is what */
static void lg_g15_handle_lcd_menu_keys(struct lg_g15_data *g15, u8 *data)
{
@@ -572,6 +857,10 @@ static int lg_g15_raw_event(struct hid_device *hdev, struct hid_report *report,
return 0;
switch (g15->model) {
+ case LG_G13:
+ if (data[0] == 0x01 && size == sizeof(struct g13_input_report))
+ return lg_g13_event(g15, data);
+ break;
case LG_G15:
if (data[0] == 0x02 && size == 9)
return lg_g15_event(g15, data);
@@ -616,13 +905,22 @@ static void lg_g15_setup_led_rgb(struct lg_g15_data *g15, int index)
{
int i;
struct mc_subled *subled_info;
-
- g15->leds[index].mcdev.led_cdev.brightness_set_blocking =
- lg_g510_kbd_led_set;
- g15->leds[index].mcdev.led_cdev.brightness_get =
- lg_g510_kbd_led_get;
- g15->leds[index].mcdev.led_cdev.max_brightness = 255;
- g15->leds[index].mcdev.num_colors = 3;
+ struct lg_g15_led * const gled = &g15->leds[index];
+
+ if (g15->model == LG_G13) {
+ gled->mcdev.led_cdev.brightness_set_blocking =
+ lg_g13_kbd_led_set;
+ gled->mcdev.led_cdev.brightness_get =
+ lg_g13_kbd_led_get;
+ gled->mcdev.led_cdev.flags = LED_BRIGHT_HW_CHANGED;
+ } else {
+ gled->mcdev.led_cdev.brightness_set_blocking =
+ lg_g510_kbd_led_set;
+ gled->mcdev.led_cdev.brightness_get =
+ lg_g510_kbd_led_get;
+ }
+ gled->mcdev.led_cdev.max_brightness = 255;
+ gled->mcdev.num_colors = 3;
subled_info = devm_kcalloc(&g15->hdev->dev, 3, sizeof(*subled_info), GFP_KERNEL);
if (!subled_info)
@@ -632,20 +930,20 @@ static void lg_g15_setup_led_rgb(struct lg_g15_data *g15, int index)
switch (i + 1) {
case LED_COLOR_ID_RED:
subled_info[i].color_index = LED_COLOR_ID_RED;
- subled_info[i].intensity = g15->leds[index].red;
+ subled_info[i].intensity = gled->red;
break;
case LED_COLOR_ID_GREEN:
subled_info[i].color_index = LED_COLOR_ID_GREEN;
- subled_info[i].intensity = g15->leds[index].green;
+ subled_info[i].intensity = gled->green;
break;
case LED_COLOR_ID_BLUE:
subled_info[i].color_index = LED_COLOR_ID_BLUE;
- subled_info[i].intensity = g15->leds[index].blue;
+ subled_info[i].intensity = gled->blue;
break;
}
subled_info[i].channel = i;
}
- g15->leds[index].mcdev.subled_info = subled_info;
+ gled->mcdev.subled_info = subled_info;
}
static int lg_g15_register_led(struct lg_g15_data *g15, int i, const char *name)
@@ -656,6 +954,23 @@ static int lg_g15_register_led(struct lg_g15_data *g15, int i, const char *name)
g15->leds[i].cdev.name = name;
switch (g15->model) {
+ case LG_G13:
+ if (i < LG_G15_BRIGHTNESS_MAX) {
+ /* RGB backlight. */
+ lg_g15_setup_led_rgb(g15, i);
+ ret = devm_led_classdev_multicolor_register_ext(&g15->hdev->dev,
+ &g15->leds[i].mcdev,
+ NULL);
+ } else {
+ /* Macro keys */
+ g15->leds[i].cdev.brightness_set_blocking = lg_g13_mkey_led_set;
+ g15->leds[i].cdev.brightness_get = lg_g13_mkey_led_get;
+ g15->leds[i].cdev.max_brightness = 1;
+
+ ret = devm_led_classdev_register(&g15->hdev->dev,
+ &g15->leds[i].cdev);
+ }
+ break;
case LG_G15:
case LG_G15_V2:
g15->leds[i].cdev.brightness_get = lg_g15_led_get;
@@ -702,27 +1017,60 @@ static int lg_g15_register_led(struct lg_g15_data *g15, int i, const char *name)
}
/* Common input device init code shared between keyboards and Z-10 speaker handling */
-static void lg_g15_init_input_dev(struct hid_device *hdev, struct input_dev *input,
- const char *name)
+static void lg_g15_init_input_dev_core(struct hid_device *hdev,
+ struct input_dev *input,
+ char const *name)
{
- int i;
-
- input->name = name;
- input->phys = hdev->phys;
- input->uniq = hdev->uniq;
+ input->name = name;
+ input->phys = hdev->phys;
+ input->uniq = hdev->uniq;
input->id.bustype = hdev->bus;
input->id.vendor = hdev->vendor;
input->id.product = hdev->product;
input->id.version = hdev->version;
input->dev.parent = &hdev->dev;
- input->open = lg_g15_input_open;
- input->close = lg_g15_input_close;
+ input->open = lg_g15_input_open;
+ input->close = lg_g15_input_close;
+}
+
+static void lg_g15_init_input_dev(struct hid_device *hdev, struct input_dev *input,
+ const char *name)
+{
+ int i;
+
+ lg_g15_init_input_dev_core(hdev, input, name);
/* Keys below the LCD, intended for controlling a menu on the LCD */
for (i = 0; i < 5; i++)
input_set_capability(input, EV_KEY, KEY_KBD_LCD_MENU1 + i);
}
+static void lg_g13_init_input_dev(struct hid_device *hdev,
+ struct input_dev *input, const char *name,
+ struct input_dev *input_js, const char *name_js)
+{
+ /* Macropad. */
+ lg_g15_init_input_dev_core(hdev, input, name);
+ for (int i = 0; i < ARRAY_SIZE(g13_keys_for_bits); ++i) {
+ if (g13_keys_for_bits[i]) {
+ input_set_capability(input, EV_KEY, g13_keys_for_bits[i]);
+ }
+ }
+
+ /* OBTW, we're a joystick, too... */
+ lg_g15_init_input_dev_core(hdev, input_js, name_js);
+ for (int i = 0; i < ARRAY_SIZE(g13_keys_for_bits_js); ++i) {
+ if (g13_keys_for_bits_js[i]) {
+ input_set_capability(input_js, EV_KEY, g13_keys_for_bits_js[i]);
+ }
+ }
+
+ input_set_capability(input_js, EV_ABS, ABS_X);
+ input_set_abs_params(input_js, ABS_X, 0, 255, 0, 0);
+ input_set_capability(input_js, EV_ABS, ABS_Y);
+ input_set_abs_params(input_js, ABS_Y, 0, 255, 0, 0);
+}
+
static int lg_g15_probe(struct hid_device *hdev, const struct hid_device_id *id)
{
static const char * const led_names[] = {
@@ -739,7 +1087,7 @@ static int lg_g15_probe(struct hid_device *hdev, const struct hid_device_id *id)
unsigned int connect_mask = 0;
bool has_ff000000 = false;
struct lg_g15_data *g15;
- struct input_dev *input;
+ struct input_dev *input, *input_js;
struct hid_report *rep;
int ret, i, gkeys = 0;
@@ -778,6 +1126,21 @@ static int lg_g15_probe(struct hid_device *hdev, const struct hid_device_id *id)
hid_set_drvdata(hdev, (void *)g15);
switch (g15->model) {
+ case LG_G13:
+ /*
+ * Some usermode libraries tend to ignore devices that don't
+ * "look like" a joystick. Create additional input device
+ * dedicated as joystick.
+ */
+ input_js = devm_input_allocate_device(&hdev->dev);
+ if (!input_js)
+ return -ENOMEM;
+ g15->input_js = input_js;
+ input_set_drvdata(input_js, hdev);
+
+ connect_mask = HID_CONNECT_HIDRAW;
+ gkeys = 25;
+ break;
case LG_G15:
INIT_WORK(&g15->work, lg_g15_leds_changed_work);
/*
@@ -859,6 +1222,34 @@ static int lg_g15_probe(struct hid_device *hdev, const struct hid_device_id *id)
goto error_hw_stop;
return 0; /* All done */
+ } else if (g15->model == LG_G13) {
+ static char const * const g13_led_names[] = {
+ /* Backlight is shared between LCD and keys. */
+ "g13:rgb:kbd_backlight",
+ NULL, // Keep in sync with led_type enum
+ "g13:red:macro_preset_1",
+ "g13:red:macro_preset_2",
+ "g13:red:macro_preset_3",
+ "g13:red:macro_record",
+ };
+ lg_g13_init_input_dev(hdev,
+ input, "Logitech G13 Gaming Keypad",
+ input_js, "Logitech G13 Thumbstick");
+ ret = input_register_device(input);
+ if (ret)
+ goto error_hw_stop;
+ ret = input_register_device(input_js);
+ if (ret)
+ goto error_hw_stop;
+
+ for (i = 0; i < ARRAY_SIZE(g13_led_names); ++i) {
+ if (g13_led_names[i]) {
+ ret = lg_g15_register_led(g15, i, g13_led_names[i]);
+ if (ret)
+ goto error_hw_stop;
+ }
+ }
+ return 0;
}
/* Setup and register input device */
@@ -903,6 +1294,13 @@ static int lg_g15_probe(struct hid_device *hdev, const struct hid_device_id *id)
}
static const struct hid_device_id lg_g15_devices[] = {
+ /*
+ * The G13 is a macropad-only device with an LCD, LED backlighing,
+ * and joystick.
+ */
+ { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
+ USB_DEVICE_ID_LOGITECH_G13),
+ .driver_data = LG_G13 },
/* The G11 is a G15 without the LCD, treat it as a G15 */
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
USB_DEVICE_ID_LOGITECH_G11),
--
2.50.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH v2] HID: lg-g15 - Add support for Logitech G13.
2025-08-12 6:53 [PATCH v2] HID: lg-g15 - Add support for Logitech G13 Leo L. Schwab
@ 2025-08-12 11:24 ` Markus Elfring
2025-08-12 11:51 ` Markus Elfring
` (3 subsequent siblings)
4 siblings, 0 replies; 7+ messages in thread
From: Markus Elfring @ 2025-08-12 11:24 UTC (permalink / raw)
To: Leo L. Schwab, linux-input
Cc: LKML, Benjamin Tissoires, Hans de Goede, Jiri Kosina, Kate Hsuan
…
> Supports input event generation for all keys and the thumbstick, and
> exposes all LEDs.
See also once more:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/process/submitting-patches.rst?h=v6.17-rc1#n94
Regards,
Markus
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v2] HID: lg-g15 - Add support for Logitech G13.
2025-08-12 6:53 [PATCH v2] HID: lg-g15 - Add support for Logitech G13 Leo L. Schwab
2025-08-12 11:24 ` Markus Elfring
@ 2025-08-12 11:51 ` Markus Elfring
2025-08-12 12:55 ` Markus Elfring
` (2 subsequent siblings)
4 siblings, 0 replies; 7+ messages in thread
From: Markus Elfring @ 2025-08-12 11:51 UTC (permalink / raw)
To: Leo L. Schwab, linux-input
Cc: LKML, Benjamin Tissoires, Hans de Goede, Jiri Kosina, Kate Hsuan
…
> +++ b/drivers/hid/hid-ids.h
…
> +static int lg_g13_event(struct lg_g15_data *g15, u8 const *data)
> +{
…
> +#ifdef CONFIG_LEDS_BRIGHTNESS_HW_CHANGED
…
> + if (hw_brightness_changed) {
> + led_classdev_notify_brightness_hw_changed(
> + &g15->leds[0].cdev,
> + TEST_BIT(rep->keybits, 23) ? LED_FULL : LED_OFF);
> + }
> +#endif
…
> +static void lg_g13_init_input_dev(struct hid_device *hdev,
> + struct input_dev *input, const char *name,
> + struct input_dev *input_js, const char *name_js)
> +{
…
> + for (int i = 0; i < ARRAY_SIZE(g13_keys_for_bits); ++i) {
> + if (g13_keys_for_bits[i]) {
> + input_set_capability(input, EV_KEY, g13_keys_for_bits[i]);
> + }
> + }
…
> + for (int i = 0; i < ARRAY_SIZE(g13_keys_for_bits_js); ++i) {
> + if (g13_keys_for_bits_js[i]) {
> + input_set_capability(input_js, EV_KEY, g13_keys_for_bits_js[i]);
> + }
> + }
…
May curly brackets be omitted at selected source code places?
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/process/coding-style.rst?h=v6.17-rc1#n197
Regards,
Markus
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v2] HID: lg-g15 - Add support for Logitech G13.
2025-08-12 6:53 [PATCH v2] HID: lg-g15 - Add support for Logitech G13 Leo L. Schwab
2025-08-12 11:24 ` Markus Elfring
2025-08-12 11:51 ` Markus Elfring
@ 2025-08-12 12:55 ` Markus Elfring
2025-08-13 0:11 ` kernel test robot
2025-08-14 9:09 ` Kate Hsuan
4 siblings, 0 replies; 7+ messages in thread
From: Markus Elfring @ 2025-08-12 12:55 UTC (permalink / raw)
To: Leo L. Schwab, linux-input
Cc: LKML, Benjamin Tissoires, Hans de Goede, Jiri Kosina, Kate Hsuan
…
> +++ b/drivers/hid/hid-lg-g15.c
…
> +static int lg_g13_get_leds_state(struct lg_g15_data *g15)
> +{
…
> + for (int i = LG_G15_MACRO_PRESET1; i < LG_G15_LED_MAX; ++i)
…
+static int lg_g13_mkey_led_set(struct led_classdev *led_cdev, enum led_brightness brightness)
+{
…
> + for (i = LG_G15_MACRO_PRESET1; i < LG_G15_LED_MAX; ++i) {
…
Please reconsider the usage of double space characters at some source code places.
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/process/coding-style.rst?h=v6.17-rc1#n234
Regards,
Markus
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v2] HID: lg-g15 - Add support for Logitech G13.
2025-08-12 6:53 [PATCH v2] HID: lg-g15 - Add support for Logitech G13 Leo L. Schwab
` (2 preceding siblings ...)
2025-08-12 12:55 ` Markus Elfring
@ 2025-08-13 0:11 ` kernel test robot
2025-08-14 9:09 ` Kate Hsuan
4 siblings, 0 replies; 7+ messages in thread
From: kernel test robot @ 2025-08-13 0:11 UTC (permalink / raw)
To: Leo L. Schwab, Hans de Goede
Cc: oe-kbuild-all, Kate Hsuan, Leo L. Schwab, Jiri Kosina,
Benjamin Tissoires, linux-input, linux-kernel
Hi Leo,
kernel test robot noticed the following build warnings:
[auto build test WARNING on hid/for-next]
[also build test WARNING on linus/master v6.17-rc1 next-20250812]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Leo-L-Schwab/HID-lg-g15-Add-support-for-Logitech-G13/20250812-151139
base: https://git.kernel.org/pub/scm/linux/kernel/git/hid/hid.git for-next
patch link: https://lore.kernel.org/r/20250812065327.515098-2-ewhac%40ewhac.org
patch subject: [PATCH v2] HID: lg-g15 - Add support for Logitech G13.
config: arm-randconfig-004-20250813 (https://download.01.org/0day-ci/archive/20250813/202508130759.HscxexZX-lkp@intel.com/config)
compiler: arm-linux-gnueabi-gcc (GCC) 8.5.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20250813/202508130759.HscxexZX-lkp@intel.com/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202508130759.HscxexZX-lkp@intel.com/
All warnings (new ones prefixed by >>):
drivers/hid/hid-lg-g15.c: In function 'lg_g13_event':
>> drivers/hid/hid-lg-g15.c:660:7: warning: unused variable 'hw_brightness_changed' [-Wunused-variable]
bool hw_brightness_changed;
^~~~~~~~~~~~~~~~~~~~~
vim +/hw_brightness_changed +660 drivers/hid/hid-lg-g15.c
655
656 static int lg_g13_event(struct lg_g15_data *g15, u8 const *data)
657 {
658 struct g13_input_report const * const rep = (struct g13_input_report *) data;
659 int i, val;
> 660 bool hw_brightness_changed;
661
662 /*
663 * Main macropad and menu keys.
664 * Emit key events defined for each bit position.
665 */
666 for (i = 0; i < ARRAY_SIZE(g13_keys_for_bits); ++i) {
667 if (g13_keys_for_bits[i]) {
668 val = TEST_BIT(rep->keybits, i);
669 input_report_key(g15->input, g13_keys_for_bits[i], val);
670 }
671 }
672 input_sync(g15->input);
673
674 /*
675 * Joystick.
676 * Emit button and deflection events.
677 */
678 for (i = 0; i < ARRAY_SIZE(g13_keys_for_bits_js); ++i) {
679 if (g13_keys_for_bits_js[i]) {
680 val = TEST_BIT(rep->keybits, i + 33);
681 input_report_key(g15->input_js, g13_keys_for_bits_js[i], val);
682 }
683 }
684 input_report_abs(g15->input_js, ABS_X, rep->joy_x);
685 input_report_abs(g15->input_js, ABS_Y, rep->joy_y);
686 input_sync(g15->input_js);
687
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v2] HID: lg-g15 - Add support for Logitech G13.
2025-08-12 6:53 [PATCH v2] HID: lg-g15 - Add support for Logitech G13 Leo L. Schwab
` (3 preceding siblings ...)
2025-08-13 0:11 ` kernel test robot
@ 2025-08-14 9:09 ` Kate Hsuan
2025-08-14 20:27 ` Leo L. Schwab
4 siblings, 1 reply; 7+ messages in thread
From: Kate Hsuan @ 2025-08-14 9:09 UTC (permalink / raw)
To: Leo L. Schwab
Cc: Hans de Goede, Jiri Kosina, Benjamin Tissoires, linux-input,
linux-kernel
Hi Leo,
Thank you for your work.
On Tue, Aug 12, 2025 at 2:57 PM Leo L. Schwab <ewhac@ewhac.org> wrote:
>
> The Logitech G13 is a gaming keypad with general-purpose macro keys,
> four LED-backlit macro preset keys, five "menu" keys, backlight toggle
> key, an analog thumbstick, RGB LED backlight, and a monochrome LCD
> display.
>
> Supports input event generation for all keys and the thumbstick, and
> exposes all LEDs.
>
> Signed-off-by: Leo L. Schwab <ewhac@ewhac.org>
> ---
> Changes in v2:
> - Add `#ifdef CONFIG_LEDS_BRIGHTNESS_HW_CHANGED` bracket around new
> code segment dependent on that feature (fixes test robot build
> error).
> - Use `guard(mutex)` construct in new code (existing code left
> unmodified).
> - Commit message revised.
>
> drivers/hid/hid-ids.h | 1 +
> drivers/hid/hid-lg-g15.c | 440 +++++++++++++++++++++++++++++++++++++--
> 2 files changed, 420 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
> index 33cc5820f2be..7ed1e402b80a 100644
> --- a/drivers/hid/hid-ids.h
> +++ b/drivers/hid/hid-ids.h
> @@ -870,6 +870,7 @@
> #define USB_DEVICE_ID_LOGITECH_DUAL_ACTION 0xc216
> #define USB_DEVICE_ID_LOGITECH_RUMBLEPAD2 0xc218
> #define USB_DEVICE_ID_LOGITECH_RUMBLEPAD2_2 0xc219
> +#define USB_DEVICE_ID_LOGITECH_G13 0xc21c
> #define USB_DEVICE_ID_LOGITECH_G15_LCD 0xc222
> #define USB_DEVICE_ID_LOGITECH_G11 0xc225
> #define USB_DEVICE_ID_LOGITECH_G15_V2_LCD 0xc227
> diff --git a/drivers/hid/hid-lg-g15.c b/drivers/hid/hid-lg-g15.c
> index f8605656257b..1749d0b43967 100644
> --- a/drivers/hid/hid-lg-g15.c
> +++ b/drivers/hid/hid-lg-g15.c
> @@ -26,7 +26,11 @@
> #define LG_G510_FEATURE_BACKLIGHT_RGB 0x05
> #define LG_G510_FEATURE_POWER_ON_RGB 0x06
>
> +#define LG_G13_FEATURE_M_KEYS_LEDS 0x05
> +#define LG_G13_FEATURE_BACKLIGHT_RGB 0x07
> +
> enum lg_g15_model {
> + LG_G13,
> LG_G15,
> LG_G15_V2,
> LG_G510,
> @@ -45,6 +49,12 @@ enum lg_g15_led_type {
> LG_G15_LED_MAX
> };
>
> +struct g13_input_report {
> + u8 report_id; // 1
The comment should describe the reason of the settings in C comment
style, for exmple
u8 report_id; /* The report ID is always set to 1 */
> + u8 joy_x, joy_y;
> + u8 keybits[5];
> +};
> +
> struct lg_g15_led {
> union {
> struct led_classdev cdev;
> @@ -63,12 +73,174 @@ struct lg_g15_data {
> struct mutex mutex;
> struct work_struct work;
> struct input_dev *input;
> + struct input_dev *input_js; // joystick device for G13
The comment should in C comments, for example
struct input_dev *input_js; /*joystick device for G13*/
> struct hid_device *hdev;
> enum lg_g15_model model;
> struct lg_g15_led leds[LG_G15_LED_MAX];
> bool game_mode_enabled;
> };
>
> +/********* G13 LED functions ***********/
> +/*
> + * G13 retains no state across power cycles, and always powers up with the backlight on,
> + * color #5AFF6E, all macro key LEDs off.
> + */
> +static int lg_g13_get_leds_state(struct lg_g15_data *g15)
> +{
> + u8 * const tbuf = g15->transfer_buf;
> + int ret, high;
> +
> + /* RGB backlight. */
One white space is good.
/* RGB backlight. */
> + ret = hid_hw_raw_request(g15->hdev, LG_G13_FEATURE_BACKLIGHT_RGB,
> + tbuf, 5,
> + HID_FEATURE_REPORT, HID_REQ_GET_REPORT);
> + if (ret != 5) {
> + hid_err(g15->hdev, "Error getting backlight brightness: %d\n", ret);
> + return (ret < 0) ? ret : -EIO;
> + }
> +
> + /* Normalize RGB intensities against highest component. */
Ditto and should be "the highest component".
> + high = max3(tbuf[1], tbuf[2], tbuf[3]);
> + if (high) {
> + g15->leds[LG_G15_KBD_BRIGHTNESS].red =
> + DIV_ROUND_CLOSEST(tbuf[1] * 255, high);
> + g15->leds[LG_G15_KBD_BRIGHTNESS].green =
> + DIV_ROUND_CLOSEST(tbuf[2] * 255, high);
> + g15->leds[LG_G15_KBD_BRIGHTNESS].blue =
> + DIV_ROUND_CLOSEST(tbuf[3] * 255, high);
> + g15->leds[LG_G15_KBD_BRIGHTNESS].brightness = high;
> + } else {
> + g15->leds[LG_G15_KBD_BRIGHTNESS].red = 255;
> + g15->leds[LG_G15_KBD_BRIGHTNESS].green = 255;
> + g15->leds[LG_G15_KBD_BRIGHTNESS].blue = 255;
> + g15->leds[LG_G15_KBD_BRIGHTNESS].brightness = 0;
> + }
> +
> + /* Macro LEDs. */
Ditto.
> + ret = hid_hw_raw_request(g15->hdev, LG_G13_FEATURE_M_KEYS_LEDS,
> + tbuf, 5,
> + HID_FEATURE_REPORT, HID_REQ_GET_REPORT);
> + if (ret != 5) {
> + hid_err(g15->hdev, "Error getting macro LED brightness: %d\n", ret);
> + return (ret < 0) ? ret : -EIO;
> + }
> +
> + for (int i = LG_G15_MACRO_PRESET1; i < LG_G15_LED_MAX; ++i)
> + g15->leds[i].brightness = tbuf[1] & (1 << (i - LG_G15_MACRO_PRESET1));
> +
> + return 0;
> +}
> +
> +/* Must be called with g15->mutex locked */
If guard() is called in lg_g13_kbd_led_write() and the comment can be dropped.
> +static int lg_g13_kbd_led_write(struct lg_g15_data *g15,
> + struct lg_g15_led *g15_led,
> + enum led_brightness brightness)
> +{
> + struct mc_subled const * const subleds = g15_led->mcdev.subled_info;
> + u8 * const tbuf = g15->transfer_buf;
> + int ret;
> +
> + led_mc_calc_color_components(&g15_led->mcdev, brightness);
> +
> + tbuf[0] = 5;
> + tbuf[1] = subleds[0].brightness;
> + tbuf[2] = subleds[1].brightness;
> + tbuf[3] = subleds[2].brightness;
> + tbuf[4] = 0;
> +
> + ret = hid_hw_raw_request(g15->hdev, LG_G13_FEATURE_BACKLIGHT_RGB,
> + tbuf, 5,
> + HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
> + if (ret == 5) {
> + g15_led->brightness = brightness;
> + ret = 0;
> + } else {
> + hid_err(g15->hdev, "Error setting backlight brightness: %d\n", ret);
> + ret = (ret < 0) ? ret : -EIO;
> + }
> +
> + return ret;
> +}
> +
> +static int lg_g13_kbd_led_set(struct led_classdev *led_cdev, enum led_brightness brightness)
> +{
> + struct led_classdev_mc *mc = lcdev_to_mccdev(led_cdev);
> + struct lg_g15_led *g15_led =
> + container_of(mc, struct lg_g15_led, mcdev);
> + struct lg_g15_data *g15 = dev_get_drvdata(led_cdev->dev->parent);
> +
> + /* Ignore LED off on unregister / keyboard unplug */
> + if (led_cdev->flags & LED_UNREGISTERING)
> + return 0;
> +
> + guard(mutex)(&g15->mutex);
guard() can be moved to lg_g13_kbd_led_write() to ensure the code is
protected by a mutex lock when lg_g13_kbd_led_write() is called.
> + return lg_g13_kbd_led_write(g15, g15_led, brightness);
> +}
> +
> +static enum led_brightness lg_g13_kbd_led_get(struct led_classdev *led_cdev)
> +{
> + struct led_classdev_mc const * const mc = lcdev_to_mccdev(led_cdev);
> + struct lg_g15_led const *g15_led =
> + container_of(mc, struct lg_g15_led, mcdev);
> +
> + return g15_led->brightness;
> +}
> +
> +static int lg_g13_mkey_led_set(struct led_classdev *led_cdev, enum led_brightness brightness)
> +{
> + struct lg_g15_led *g15_led =
> + container_of(led_cdev, struct lg_g15_led, cdev);
> + struct lg_g15_data *g15 = dev_get_drvdata(led_cdev->dev->parent);
> + int i, ret;
> + u8 * const tbuf = g15->transfer_buf;
> + u8 val, mask = 0;
> +
> + /* Ignore LED off on unregister / keyboard unplug */
> + if (led_cdev->flags & LED_UNREGISTERING)
> + return 0;
> +
> + guard(mutex)(&g15->mutex);
> +
> + for (i = LG_G15_MACRO_PRESET1; i < LG_G15_LED_MAX; ++i) {
> + if (i == g15_led->led)
> + val = brightness;
> + else
> + val = g15->leds[i].brightness;
> +
> + if (val)
> + mask |= 1 << (i - LG_G15_MACRO_PRESET1);
> + }
> +
> + tbuf[0] = 5;
> + tbuf[1] = mask;
> + tbuf[2] =
> + tbuf[3] =
> + tbuf[4] = 0;
To increase the readability, it could be
tbuf[2] = 0;
tbuf[3] = 0;
tbuf[4] = 0;
> +
> + ret = hid_hw_raw_request(g15->hdev, LG_G13_FEATURE_M_KEYS_LEDS,
> + tbuf, 5,
> + HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
> + if (ret != 5) {
> + hid_err(g15->hdev, "Error setting LED brightness: %d\n", ret);
> + return (ret < 0) ? ret : -EIO;
> + }
> +
> + g15_led->brightness = brightness;
> + return 0;
> +}
> +
> +static enum led_brightness lg_g13_mkey_led_get(struct led_classdev *led_cdev)
> +{
> + /*
> + * G13 doesn't change macro key LEDs behind our back, so they're
> + * whatever we last set them to.
> + */
> + struct lg_g15_led *g15_led =
> + container_of(led_cdev, struct lg_g15_led, cdev);
> +
> + return g15_led->brightness;
> +}
> +
> /******** G15 and G15 v2 LED functions ********/
>
> static int lg_g15_update_led_brightness(struct lg_g15_data *g15)
> @@ -390,6 +562,8 @@ static int lg_g15_get_initial_led_brightness(struct lg_g15_data *g15)
> int ret;
>
> switch (g15->model) {
> + case LG_G13:
> + return lg_g13_get_leds_state(g15);
> case LG_G15:
> case LG_G15_V2:
> return lg_g15_update_led_brightness(g15);
> @@ -417,6 +591,117 @@ static int lg_g15_get_initial_led_brightness(struct lg_g15_data *g15)
>
> /******** Input functions ********/
>
> +/**
> + * g13_input_report.keybits[] is not 32-bit aligned, so we can't use the bitops macros.
> + *
> + * @ary: Pointer to array of u8s
> + * @b: Bit index into ary, LSB first. Not range checked.
Single white space is good.
@b: Bit index into ary, LSB first. Not range checked.
> + */
> +#define TEST_BIT(ary, b) ((1 << ((b) & 7)) & (ary)[(b) >> 3])
> +
> +/* Table mapping keybits[] bit positions to event codes. */
> +/* Note: Indices are discontinuous to aid readability. */
Signal white space is good.
/* Table mapping keybits[] bit positions to event codes. */
/* Note: Indices are discontinuous to aid readability. */
> +static const u16 g13_keys_for_bits[] = {
> + /* Main keypad - keys G1 - G22 */
Ditto.
> + [0] = KEY_MACRO1,
> + [1] = KEY_MACRO2,
> + [2] = KEY_MACRO3,
> + [3] = KEY_MACRO4,
> + [4] = KEY_MACRO5,
> + [5] = KEY_MACRO6,
> + [6] = KEY_MACRO7,
> + [7] = KEY_MACRO8,
> + [8] = KEY_MACRO9,
> + [9] = KEY_MACRO10,
> + [10] = KEY_MACRO11,
> + [11] = KEY_MACRO12,
> + [12] = KEY_MACRO13,
> + [13] = KEY_MACRO14,
> + [14] = KEY_MACRO15,
> + [15] = KEY_MACRO16,
> + [16] = KEY_MACRO17,
> + [17] = KEY_MACRO18,
> + [18] = KEY_MACRO19,
> + [19] = KEY_MACRO20,
> + [20] = KEY_MACRO21,
> + [21] = KEY_MACRO22,
> +
> + /* LCD menu buttons. */
> + [24] = KEY_KBD_LCD_MENU5, // "Next page" button
Use C-style comments
[24] = KEY_KBD_LCD_MENU5, /* "Next page" button */
> + [25] = KEY_KBD_LCD_MENU1, // Left-most
Ditto
> + [26] = KEY_KBD_LCD_MENU2,
> + [27] = KEY_KBD_LCD_MENU3,
> + [28] = KEY_KBD_LCD_MENU4, // Right-most
Ditto
> +
> + /* Macro preset and record buttons; have red LEDs under them. */
Single while space is good.
/* Macro preset and record buttons; have red LEDs under them. */
> + [29] = KEY_MACRO_PRESET1,
> + [30] = KEY_MACRO_PRESET2,
> + [31] = KEY_MACRO_PRESET3,
> + [32] = KEY_MACRO_RECORD_START,
> +
> + /* 33-35 handled by joystick device. */
Ditto.
> +
> + /* Backlight toggle. */
Ditto.
> + [37] = KEY_LIGHTS_TOGGLE,
Replace the tab with a white space.
> +};
> +
> +static const u16 g13_keys_for_bits_js[] = {
> + /* Joystick buttons */
> + /* These keybits are at bit indices 33, 34, and 35. */
Single white space is good.
> + BTN_BASE, // Left side
Replace the C++ comments with the C comment format /* ... */. Please
check them and replace them with C-style comments
> + BTN_BASE2, // Bottom side
> + BTN_THUMB, // Stick depress
> +};
> +
> +static int lg_g13_event(struct lg_g15_data *g15, u8 const *data)
> +{
> + struct g13_input_report const * const rep = (struct g13_input_report *) data;
> + int i, val;
> + bool hw_brightness_changed;
Remove unused variable.
> +
> + /*
> + * Main macropad and menu keys.
> + * Emit key events defined for each bit position.
> + */
> + for (i = 0; i < ARRAY_SIZE(g13_keys_for_bits); ++i) {
> + if (g13_keys_for_bits[i]) {
> + val = TEST_BIT(rep->keybits, i);
> + input_report_key(g15->input, g13_keys_for_bits[i], val);
> + }
> + }
> + input_sync(g15->input);
> +
> + /*
> + * Joystick.
> + * Emit button and deflection events.
> + */
> + for (i = 0; i < ARRAY_SIZE(g13_keys_for_bits_js); ++i) {
> + if (g13_keys_for_bits_js[i]) {
> + val = TEST_BIT(rep->keybits, i + 33);
> + input_report_key(g15->input_js, g13_keys_for_bits_js[i], val);
> + }
> + }
> + input_report_abs(g15->input_js, ABS_X, rep->joy_x);
> + input_report_abs(g15->input_js, ABS_Y, rep->joy_y);
> + input_sync(g15->input_js);
> +
> +#ifdef CONFIG_LEDS_BRIGHTNESS_HW_CHANGED
> + /*
> + * Bit 23 of keybits[] reports the current backlight on/off state. If
> + * it has changed from the last cached value, apply an update.
> + */
> + hw_brightness_changed =
> + (!!TEST_BIT(rep->keybits, 23)) ^ (g15->leds[0].cdev.brightness_hw_changed > 0);
> + if (hw_brightness_changed) {
> + led_classdev_notify_brightness_hw_changed(
> + &g15->leds[0].cdev,
> + TEST_BIT(rep->keybits, 23) ? LED_FULL : LED_OFF);
> + }
> +#endif
> +
> + return 0;
> +}
> +
> /* On the G15 Mark I Logitech has been quite creative with which bit is what */
> static void lg_g15_handle_lcd_menu_keys(struct lg_g15_data *g15, u8 *data)
> {
> @@ -572,6 +857,10 @@ static int lg_g15_raw_event(struct hid_device *hdev, struct hid_report *report,
> return 0;
>
> switch (g15->model) {
> + case LG_G13:
> + if (data[0] == 0x01 && size == sizeof(struct g13_input_report))
Separate the variable and the operator with one white space.
if (data[0] == 0x01 && size == sizeof(struct g13_input_report))
> + return lg_g13_event(g15, data);
> + break;
> case LG_G15:
> if (data[0] == 0x02 && size == 9)
> return lg_g15_event(g15, data);
> @@ -616,13 +905,22 @@ static void lg_g15_setup_led_rgb(struct lg_g15_data *g15, int index)
> {
> int i;
> struct mc_subled *subled_info;
> -
> - g15->leds[index].mcdev.led_cdev.brightness_set_blocking =
> - lg_g510_kbd_led_set;
> - g15->leds[index].mcdev.led_cdev.brightness_get =
> - lg_g510_kbd_led_get;
> - g15->leds[index].mcdev.led_cdev.max_brightness = 255;
> - g15->leds[index].mcdev.num_colors = 3;
> + struct lg_g15_led * const gled = &g15->leds[index];
> +
> + if (g15->model == LG_G13) {
> + gled->mcdev.led_cdev.brightness_set_blocking =
> + lg_g13_kbd_led_set;
> + gled->mcdev.led_cdev.brightness_get =
> + lg_g13_kbd_led_get;
> + gled->mcdev.led_cdev.flags = LED_BRIGHT_HW_CHANGED;
> + } else {
> + gled->mcdev.led_cdev.brightness_set_blocking =
> + lg_g510_kbd_led_set;
> + gled->mcdev.led_cdev.brightness_get =
> + lg_g510_kbd_led_get;
> + }
> + gled->mcdev.led_cdev.max_brightness = 255;
> + gled->mcdev.num_colors = 3;
>
> subled_info = devm_kcalloc(&g15->hdev->dev, 3, sizeof(*subled_info), GFP_KERNEL);
> if (!subled_info)
> @@ -632,20 +930,20 @@ static void lg_g15_setup_led_rgb(struct lg_g15_data *g15, int index)
> switch (i + 1) {
> case LED_COLOR_ID_RED:
> subled_info[i].color_index = LED_COLOR_ID_RED;
> - subled_info[i].intensity = g15->leds[index].red;
> + subled_info[i].intensity = gled->red;
> break;
> case LED_COLOR_ID_GREEN:
> subled_info[i].color_index = LED_COLOR_ID_GREEN;
> - subled_info[i].intensity = g15->leds[index].green;
> + subled_info[i].intensity = gled->green;
> break;
> case LED_COLOR_ID_BLUE:
> subled_info[i].color_index = LED_COLOR_ID_BLUE;
> - subled_info[i].intensity = g15->leds[index].blue;
> + subled_info[i].intensity = gled->blue;
> break;
> }
> subled_info[i].channel = i;
> }
> - g15->leds[index].mcdev.subled_info = subled_info;
> + gled->mcdev.subled_info = subled_info;
> }
>
> static int lg_g15_register_led(struct lg_g15_data *g15, int i, const char *name)
> @@ -656,6 +954,23 @@ static int lg_g15_register_led(struct lg_g15_data *g15, int i, const char *name)
> g15->leds[i].cdev.name = name;
>
> switch (g15->model) {
> + case LG_G13:
> + if (i < LG_G15_BRIGHTNESS_MAX) {
> + /* RGB backlight. */
Use a single while space to separate /* , text and */.
> + lg_g15_setup_led_rgb(g15, i);
> + ret = devm_led_classdev_multicolor_register_ext(&g15->hdev->dev,
> + &g15->leds[i].mcdev,
> + NULL);
> + } else {
> + /* Macro keys */
Ditto.
> + g15->leds[i].cdev.brightness_set_blocking = lg_g13_mkey_led_set;
> + g15->leds[i].cdev.brightness_get = lg_g13_mkey_led_get;
> + g15->leds[i].cdev.max_brightness = 1;
No need to align the variables. Keep using one while space.
> +
> + ret = devm_led_classdev_register(&g15->hdev->dev,
> + &g15->leds[i].cdev);
> + }
> + break;
> case LG_G15:
> case LG_G15_V2:
> g15->leds[i].cdev.brightness_get = lg_g15_led_get;
> @@ -702,27 +1017,60 @@ static int lg_g15_register_led(struct lg_g15_data *g15, int i, const char *name)
> }
>
> /* Common input device init code shared between keyboards and Z-10 speaker handling */
> -static void lg_g15_init_input_dev(struct hid_device *hdev, struct input_dev *input,
> - const char *name)
> +static void lg_g15_init_input_dev_core(struct hid_device *hdev,
> + struct input_dev *input,
> + char const *name)
static void lg_g15_init_input_dev_core(struct hid_device *hdev, struct
input_dev *input,
char const *name)
> {
> - int i;
> -
> - input->name = name;
> - input->phys = hdev->phys;
> - input->uniq = hdev->uniq;
> + input->name = name;
> + input->phys = hdev->phys;
> + input->uniq = hdev->uniq;
> input->id.bustype = hdev->bus;
> input->id.vendor = hdev->vendor;
> input->id.product = hdev->product;
> input->id.version = hdev->version;
> input->dev.parent = &hdev->dev;
> - input->open = lg_g15_input_open;
> - input->close = lg_g15_input_close;
> + input->open = lg_g15_input_open;
> + input->close = lg_g15_input_close;
Don't fix the style issue.
> +}
> +
> +static void lg_g15_init_input_dev(struct hid_device *hdev, struct input_dev *input,
> + const char *name)
> +{
> + int i;
> +
> + lg_g15_init_input_dev_core(hdev, input, name);
>
> /* Keys below the LCD, intended for controlling a menu on the LCD */
> for (i = 0; i < 5; i++)
> input_set_capability(input, EV_KEY, KEY_KBD_LCD_MENU1 + i);
> }
>
> +static void lg_g13_init_input_dev(struct hid_device *hdev,
> + struct input_dev *input, const char *name,
> + struct input_dev *input_js, const char *name_js)
> +{
> + /* Macropad. */
> + lg_g15_init_input_dev_core(hdev, input, name);
> + for (int i = 0; i < ARRAY_SIZE(g13_keys_for_bits); ++i) {
> + if (g13_keys_for_bits[i]) {
> + input_set_capability(input, EV_KEY, g13_keys_for_bits[i]);
> + }
Remove the brackets for the "if" statement if only one line belongs to it.
> + }
> +
> + /* OBTW, we're a joystick, too... */
> + lg_g15_init_input_dev_core(hdev, input_js, name_js);
> + for (int i = 0; i < ARRAY_SIZE(g13_keys_for_bits_js); ++i) {
> + if (g13_keys_for_bits_js[i]) {
> + input_set_capability(input_js, EV_KEY, g13_keys_for_bits_js[i]);
> + }
Remove the brackets for the "if" statement if only one line belongs to it.
> + }
> +
> + input_set_capability(input_js, EV_ABS, ABS_X);
> + input_set_abs_params(input_js, ABS_X, 0, 255, 0, 0);
> + input_set_capability(input_js, EV_ABS, ABS_Y);
> + input_set_abs_params(input_js, ABS_Y, 0, 255, 0, 0);
> +}
> +
> static int lg_g15_probe(struct hid_device *hdev, const struct hid_device_id *id)
> {
> static const char * const led_names[] = {
> @@ -739,7 +1087,7 @@ static int lg_g15_probe(struct hid_device *hdev, const struct hid_device_id *id)
> unsigned int connect_mask = 0;
> bool has_ff000000 = false;
> struct lg_g15_data *g15;
> - struct input_dev *input;
> + struct input_dev *input, *input_js;
> struct hid_report *rep;
> int ret, i, gkeys = 0;
>
> @@ -778,6 +1126,21 @@ static int lg_g15_probe(struct hid_device *hdev, const struct hid_device_id *id)
> hid_set_drvdata(hdev, (void *)g15);
>
> switch (g15->model) {
> + case LG_G13:
> + /*
> + * Some usermode libraries tend to ignore devices that don't
> + * "look like" a joystick. Create additional input device
> + * dedicated as joystick.
> + */
Nit.
Improve the comment and describe the hardware and the variable
settings below in brief.
> + input_js = devm_input_allocate_device(&hdev->dev);
> + if (!input_js)
> + return -ENOMEM;
> + g15->input_js = input_js;
> + input_set_drvdata(input_js, hdev);
> +
> + connect_mask = HID_CONNECT_HIDRAW;
> + gkeys = 25;
> + break;
> case LG_G15:
> INIT_WORK(&g15->work, lg_g15_leds_changed_work);
> /*
> @@ -859,6 +1222,34 @@ static int lg_g15_probe(struct hid_device *hdev, const struct hid_device_id *id)
> goto error_hw_stop;
>
> return 0; /* All done */
> + } else if (g15->model == LG_G13) {
> + static char const * const g13_led_names[] = {
> + /* Backlight is shared between LCD and keys. */
Replace double white space with single white space.
> + "g13:rgb:kbd_backlight",
> + NULL, // Keep in sync with led_type enum
Replace the C++ comments with C comments.
> + "g13:red:macro_preset_1",
> + "g13:red:macro_preset_2",
> + "g13:red:macro_preset_3",
> + "g13:red:macro_record",
> + };
> + lg_g13_init_input_dev(hdev,
> + input, "Logitech G13 Gaming Keypad",
> + input_js, "Logitech G13 Thumbstick");
No need to align the parameters in a function call.
> + ret = input_register_device(input);
> + if (ret)
> + goto error_hw_stop;
> + ret = input_register_device(input_js);
> + if (ret)
> + goto error_hw_stop;
> +
> + for (i = 0; i < ARRAY_SIZE(g13_led_names); ++i) {
> + if (g13_led_names[i]) {
> + ret = lg_g15_register_led(g15, i, g13_led_names[i]);
> + if (ret)
> + goto error_hw_stop;
> + }
> + }
> + return 0;
> }
>
> /* Setup and register input device */
> @@ -903,6 +1294,13 @@ static int lg_g15_probe(struct hid_device *hdev, const struct hid_device_id *id)
> }
>
> static const struct hid_device_id lg_g15_devices[] = {
> + /*
> + * The G13 is a macropad-only device with an LCD, LED backlighing,
> + * and joystick.
> + */
> + { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
> + USB_DEVICE_ID_LOGITECH_G13),
> + .driver_data = LG_G13 },
> /* The G11 is a G15 without the LCD, treat it as a G15 */
> { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
> USB_DEVICE_ID_LOGITECH_G11),
> --
> 2.50.1
>
Some style and comment style issues are pointed out, and I'll start to
test this work after I receive my G13.
--
BR,
Kate
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v2] HID: lg-g15 - Add support for Logitech G13.
2025-08-14 9:09 ` Kate Hsuan
@ 2025-08-14 20:27 ` Leo L. Schwab
0 siblings, 0 replies; 7+ messages in thread
From: Leo L. Schwab @ 2025-08-14 20:27 UTC (permalink / raw)
To: Kate Hsuan
Cc: Hans de Goede, Jiri Kosina, Benjamin Tissoires, linux-input,
linux-kernel
On Thu, Aug 14, 2025 at 05:09:09PM +0800, Kate Hsuan wrote:
> Thank you for your work.
>
Thank you for your feedback. And thank you for collecting all your
comments into one post.
> On Tue, Aug 12, 2025 at 2:57 PM Leo L. Schwab <ewhac@ewhac.org> wrote:
> The comment should in C comments, for example
> struct input_dev *input_js; /*joystick device for G13*/
>
Will sweep all those up.
> > +static int lg_g13_kbd_led_set(struct led_classdev *led_cdev, enum led_brightness brightness)
> > +{
> > + struct led_classdev_mc *mc = lcdev_to_mccdev(led_cdev);
> > + struct lg_g15_led *g15_led =
> > + container_of(mc, struct lg_g15_led, mcdev);
> > + struct lg_g15_data *g15 = dev_get_drvdata(led_cdev->dev->parent);
> > +
> > + /* Ignore LED off on unregister / keyboard unplug */
> > + if (led_cdev->flags & LED_UNREGISTERING)
> > + return 0;
> > +
> > + guard(mutex)(&g15->mutex);
> guard() can be moved to lg_g13_kbd_led_write() to ensure the code is
> protected by a mutex lock when lg_g13_kbd_led_write() is called.
>
I was mimicking the existing structure of the G15 and G510 code,
which I assumed was set up that way for a reason. Will move this.
> > +static int lg_g13_event(struct lg_g15_data *g15, u8 const *data)
> > +{
> > + struct g13_input_report const * const rep = (struct g13_input_report *) data;
> > + int i, val;
> > + bool hw_brightness_changed;
> Remove unused variable.
>
I will be slightly restructuring this.
> > switch (g15->model) {
> > + case LG_G13:
> > + /*
> > + * Some usermode libraries tend to ignore devices that don't
> > + * "look like" a joystick. Create additional input device
> > + * dedicated as joystick.
> > + */
> Nit.
> Improve the comment and describe the hardware and the variable
> settings below in brief.
I'll wordsmith this. It'll get a bit wordier, though...
> Some style and comment style issues are pointed out, and I'll start to
> test this work after I receive my G13.
>
If anything explodes, please let me know right away.
Schwab
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2025-08-14 20:27 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2025-08-12 6:53 [PATCH v2] HID: lg-g15 - Add support for Logitech G13 Leo L. Schwab
2025-08-12 11:24 ` Markus Elfring
2025-08-12 11:51 ` Markus Elfring
2025-08-12 12:55 ` Markus Elfring
2025-08-13 0:11 ` kernel test robot
2025-08-14 9:09 ` Kate Hsuan
2025-08-14 20:27 ` Leo L. Schwab
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).