[PATCH 00/15] arm64: dts: qcom: Fix interrupt-map dtc W=1 warning and cleanup

[PATCH 00/15] arm64: dts: qcom: Fix interrupt-map dtc W=1 warning and cleanup

[Krzysztof Kozlowski]

Get rid of one dtc W=1 warning and cleanup (verified with dtx_diff).

Best regards,
Krzysztof

---
Krzysztof Kozlowski (15):
      arm64: dts: qcom: ipq5424: Add default GIC address cells
      arm64: dts: qcom: lemans: Add default GIC address cells
      arm64: dts: qcom: msm8996: Add default GIC address cells
      arm64: dts: qcom: qcs404: Add default GIC address cells
      arm64: dts: qcom: sc8180x: Add default GIC address cells
      arm64: dts: qcom: sm6150: Add default GIC address cells
      arm64: dts: qcom: sm8150: Add default GIC address cells
      arm64: dts: qcom: sm8250: Add default GIC address cells
      arm64: dts: qcom: sm8350: Add default GIC address cells
      arm64: dts: qcom: Use GIC_SPI for interrupt-map for readability
      ARM: dts: qcom: ipq4019: Add default GIC address cells
      ARM: dts: qcom: apq8064: Add default GIC address cells
      ARM: dts: qcom: ipq8064: Add default GIC address cells
      ARM: dts: qcom: sdx55: Add default GIC address cells
      ARM: dts: qcom: Use GIC_SPI for interrupt-map for readability

 arch/arm/boot/dts/qcom/qcom-apq8064.dtsi |  9 +++----
 arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi |  9 +++----
 arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi | 25 ++++++++++----------
 arch/arm/boot/dts/qcom/qcom-sdx55.dtsi   |  9 +++----
 arch/arm64/boot/dts/qcom/ipq5018.dtsi    | 16 ++++++-------
 arch/arm64/boot/dts/qcom/ipq5332.dtsi    | 16 ++++++-------
 arch/arm64/boot/dts/qcom/ipq5424.dtsi    | 33 +++++++++++++-------------
 arch/arm64/boot/dts/qcom/ipq6018.dtsi    |  8 +++----
 arch/arm64/boot/dts/qcom/ipq8074.dtsi    | 16 ++++++-------
 arch/arm64/boot/dts/qcom/ipq9574.dtsi    | 32 ++++++++++++-------------
 arch/arm64/boot/dts/qcom/lemans.dtsi     |  1 +
 arch/arm64/boot/dts/qcom/msm8996.dtsi    | 25 ++++++++++----------
 arch/arm64/boot/dts/qcom/qcs404.dtsi     |  1 +
 arch/arm64/boot/dts/qcom/sar2130p.dtsi   | 16 ++++++-------
 arch/arm64/boot/dts/qcom/sc7280.dtsi     | 16 ++++++-------
 arch/arm64/boot/dts/qcom/sc8180x.dtsi    | 33 +++++++++++++-------------
 arch/arm64/boot/dts/qcom/sc8280xp.dtsi   | 40 ++++++++++++++++----------------
 arch/arm64/boot/dts/qcom/sdm845.dtsi     | 16 ++++++-------
 arch/arm64/boot/dts/qcom/sm6150.dtsi     |  1 +
 arch/arm64/boot/dts/qcom/sm8150.dtsi     | 17 +++++++-------
 arch/arm64/boot/dts/qcom/sm8250.dtsi     | 25 ++++++++++----------
 arch/arm64/boot/dts/qcom/sm8350.dtsi     | 17 +++++++-------
 arch/arm64/boot/dts/qcom/sm8450.dtsi     | 16 ++++++-------
 arch/arm64/boot/dts/qcom/sm8550.dtsi     | 16 ++++++-------
 arch/arm64/boot/dts/qcom/sm8650.dtsi     | 16 ++++++-------
 arch/arm64/boot/dts/qcom/x1e80100.dtsi   | 24 +++++++++----------
 26 files changed, 233 insertions(+), 220 deletions(-)
---
base-commit: 931e46dcbc7e6035a90e9c4a27a84b660e083f0a
change-id: 20250822-dts-interrupt-address-cells-a1456890a281

Best regards,
-- 
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

[PATCH 01/15] arm64: dts: qcom: ipq5424: Add default GIC address cells

[Krzysztof Kozlowski]

Add missing address-cells 0 to GIC interrupt node to silence W=1
warning:

  ipq5424.dtsi:961.4-964.30: Warning (interrupt_map): /soc@0/pcie@50000000:interrupt-map:
    Missing property '#address-cells' in node /soc@0/interrupt-controller@f200000, using 0 as fallback

Value '0' is correct because:
1. GIC interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
   the fourth component "parent unit address", which size is defined by
   '#address-cells' of the node pointed to by the interrupt-parent
   component, is not used (=0).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/ipq5424.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq5424.dtsi b/arch/arm64/boot/dts/qcom/ipq5424.dtsi
index bbb539dbdf5c6827e228ac324f995108f9e7922b..b1a86b54c30f30fbb66057cf4e79ada6ebc29d89 100644
--- a/arch/arm64/boot/dts/qcom/ipq5424.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5424.dtsi
@@ -565,6 +565,7 @@ intc: interrupt-controller@f200000 {
 			compatible = "arm,gic-v3";
 			reg = <0 0xf200000 0 0x10000>, /* GICD */
 			      <0 0xf240000 0 0x80000>; /* GICR * 4 regions */
+			#address-cells = <0>;
 			#interrupt-cells = <0x3>;
 			interrupt-controller;
 			#redistributor-regions = <1>;

-- 
2.48.1

[PATCH 02/15] arm64: dts: qcom: lemans: Add default GIC address cells

[Krzysztof Kozlowski]

Add missing address-cells 0 to GIC interrupt node to silence W=1
warning:

  lemans.dtsi:7623.3-7626.29: Warning (interrupt_map): /pcie@1c00000:interrupt-map:
    Missing property '#address-cells' in node /soc@0/interrupt-controller@17a00000, using 0 as fallback

Value '0' is correct because:
1. GIC interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
   the fourth component "parent unit address", which size is defined by
   '#address-cells' of the node pointed to by the interrupt-parent
   component, is not used (=0).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/lemans.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/qcom/lemans.dtsi b/arch/arm64/boot/dts/qcom/lemans.dtsi
index 64f5378c6a4770cee2c7d76cde1098d7df17a24a..55eb2bc36b23dd61aae65f0160074637c8e7e1a2 100644
--- a/arch/arm64/boot/dts/qcom/lemans.dtsi
+++ b/arch/arm64/boot/dts/qcom/lemans.dtsi
@@ -5866,6 +5866,7 @@ intc: interrupt-controller@17a00000 {
 			reg = <0x0 0x17a00000 0x0 0x10000>,     /* GICD */
 			      <0x0 0x17a60000 0x0 0x100000>;    /* GICR * 8 */
 			interrupt-controller;
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 			#redistributor-regions = <1>;

-- 
2.48.1

[PATCH 03/15] arm64: dts: qcom: msm8996: Add default GIC address cells

[Krzysztof Kozlowski]

Add missing address-cells 0 to GIC interrupt node to silence W=1
warning:

  msm8996.dtsi:1931.5-1934.31: Warning (interrupt_map): /soc@0/bus@0/pcie@600000:interrupt-map:
    Missing property '#address-cells' in node /soc@0/interrupt-controller@9bc0000, using 0 as fallback

Value '0' is correct because:
1. GIC interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
   the fourth component "parent unit address", which size is defined by
   '#address-cells' of the node pointed to by the interrupt-parent
   component, is not used (=0).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index f91605de49095820b811ac5a81cb43eaa136b9f1..b5aab21ac5250029ee60987a1e64871ba4e2be6d 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -3766,6 +3766,7 @@ cbf: clock-controller@9a11000 {
 
 		intc: interrupt-controller@9bc0000 {
 			compatible = "qcom,msm8996-gic-v3", "arm,gic-v3";
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			interrupt-controller;
 			#redistributor-regions = <1>;

-- 
2.48.1

[PATCH 04/15] arm64: dts: qcom: qcs404: Add default GIC address cells

[Krzysztof Kozlowski]

Add missing address-cells 0 to GIC interrupt node to silence W=1
warning:

  qcs404.dtsi:1496.4-1499.30: Warning (interrupt_map): /soc@0/pcie@10000000:interrupt-map:
    Missing property '#address-cells' in node /soc@0/interrupt-controller@b000000, using 0 as fallback

Value '0' is correct because:
1. GIC interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
   the fourth component "parent unit address", which size is defined by
   '#address-cells' of the node pointed to by the interrupt-parent
   component, is not used (=0).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/qcs404.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index 5a9df6b12305c796b441dc8c75687c469943cab8..4328c1dda898c26cd1cd172762ad87b8c4ce068b 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -1312,6 +1312,7 @@ pil-reloc@94c {
 		intc: interrupt-controller@b000000 {
 			compatible = "qcom,msm-qgic2";
 			interrupt-controller;
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			reg = <0x0b000000 0x1000>,
 			      <0x0b002000 0x1000>;

-- 
2.48.1

[PATCH 05/15] arm64: dts: qcom: sc8180x: Add default GIC address cells

[Krzysztof Kozlowski]

Add missing address-cells 0 to GIC interrupt node to silence W=1
warning:

  sc8180x.dtsi:1743.4-1746.30: Warning (interrupt_map): /soc@0/pcie@1c00000:interrupt-map:
    Missing property '#address-cells' in node /soc@0/interrupt-controller@17a00000, using 0 as fallback

Value '0' is correct because:
1. GIC interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
   the fourth component "parent unit address", which size is defined by
   '#address-cells' of the node pointed to by the interrupt-parent
   component, is not used (=0).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/sc8180x.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
index 836ac94551478fd728b1229616bbc6494cee336f..15a75def6204a35d5852e73d66fd3052e38e7863 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
@@ -3721,6 +3721,7 @@ remoteproc_adsp_glink: glink-edge {
 		intc: interrupt-controller@17a00000 {
 			compatible = "arm,gic-v3";
 			interrupt-controller;
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			reg = <0x0 0x17a00000 0x0 0x10000>,	/* GICD */
 			      <0x0 0x17a60000 0x0 0x100000>;	/* GICR * 8 */

-- 
2.48.1

[PATCH 06/15] arm64: dts: qcom: sm6150: Add default GIC address cells

[Krzysztof Kozlowski]

Add missing address-cells 0 to GIC interrupt node to silence W=1
warning:

  sm6150.dtsi:1122.4-1125.30: Warning (interrupt_map): /soc@0/pcie@1c08000:interrupt-map:
    Missing property '#address-cells' in node /soc@0/interrupt-controller@17a00000, using 0 as fallback

Value '0' is correct because:
1. GIC interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
   the fourth component "parent unit address", which size is defined by
   '#address-cells' of the node pointed to by the interrupt-parent
   component, is not used (=0).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm6150.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6150.dtsi b/arch/arm64/boot/dts/qcom/sm6150.dtsi
index b66bc13c0b5e337bf9a95b4da4af33b691c14fb5..09887b3687d42ce59e1dd1004ea19f05b42b66ec 100644
--- a/arch/arm64/boot/dts/qcom/sm6150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6150.dtsi
@@ -3659,6 +3659,7 @@ intc: interrupt-controller@17a00000 {
 			reg = <0x0 0x17a00000 0x0 0x10000>,     /* GICD */
 			      <0x0 0x17a60000 0x0 0x100000>;    /* GICR * 8 */
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			interrupt-controller;
 			#redistributor-regions = <1>;

-- 
2.48.1

[PATCH 07/15] arm64: dts: qcom: sm8150: Add default GIC address cells

[Krzysztof Kozlowski]

Add missing address-cells 0 to GIC interrupt node to silence W=1
warning:

  sm8150.dtsi:1869.4-1872.30: Warning (interrupt_map): /soc@0/pcie@1c00000:interrupt-map:
    Missing property '#address-cells' in node /soc@0/interrupt-controller@17a00000, using 0 as fallback

Value '0' is correct because:
1. GIC interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
   the fourth component "parent unit address", which size is defined by
   '#address-cells' of the node pointed to by the interrupt-parent
   component, is not used (=0).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8150.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 4b347ee3244100a4db515515b73575383c5a0cb7..12e7b74cde520009d73d381adfa1deeb8788621b 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -4366,6 +4366,7 @@ compute-cb@5 {
 		intc: interrupt-controller@17a00000 {
 			compatible = "arm,gic-v3";
 			interrupt-controller;
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			reg = <0x0 0x17a00000 0x0 0x10000>,	/* GICD */
 			      <0x0 0x17a60000 0x0 0x100000>;	/* GICR * 8 */

-- 
2.48.1

[PATCH 08/15] arm64: dts: qcom: sm8250: Add default GIC address cells

[Krzysztof Kozlowski]

Add missing address-cells 0 to GIC interrupt node to silence W=1
warning:

  sm8250.dtsi:2166.4-2169.30: Warning (interrupt_map): /soc@0/pcie@1c00000:interrupt-map:
    Missing property '#address-cells' in node /soc@0/interrupt-controller@17a00000, using 0 as fallback

Value '0' is correct because:
1. GIC interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
   the fourth component "parent unit address", which size is defined by
   '#address-cells' of the node pointed to by the interrupt-parent
   component, is not used (=0).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 244339cfbed5c32708c282de18f5655535e2ff45..8e0eb802d68e9670a10cd6e227bd1eccbd872866 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -6084,6 +6084,7 @@ compute-cb@5 {
 
 		intc: interrupt-controller@17a00000 {
 			compatible = "arm,gic-v3";
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			interrupt-controller;
 			reg = <0x0 0x17a00000 0x0 0x10000>,     /* GICD */

-- 
2.48.1

[PATCH 09/15] arm64: dts: qcom: sm8350: Add default GIC address cells

[Krzysztof Kozlowski]

Add missing address-cells 0 to GIC interrupt node to silence W=1
warning:

  sm8350.dtsi:1554.4-1557.30: Warning (interrupt_map): /soc@0/pcie@1c00000:interrupt-map:
    Missing property '#address-cells' in node /soc@0/interrupt-controller@17a00000, using 0 as fallback

Value '0' is correct because:
1. GIC interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
   the fourth component "parent unit address", which size is defined by
   '#address-cells' of the node pointed to by the interrupt-parent
   component, is not used (=0).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8350.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 9a4207ead6156333b8b6030fb0fbc1d215948041..acaf40298f2e353e81793639522d0b0c52f6179f 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -3544,6 +3544,7 @@ apps_smmu: iommu@15000000 {
 
 		intc: interrupt-controller@17a00000 {
 			compatible = "arm,gic-v3";
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			interrupt-controller;
 			#redistributor-regions = <1>;

-- 
2.48.1

[PATCH 10/15] arm64: dts: qcom: Use GIC_SPI for interrupt-map for readability

[Krzysztof Kozlowski]

Decoding interrupt-map is tricky, because it consists of five
components.  Use known GIC_SPI define in final interrupt specifier
component makes easier to read.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/ipq5018.dtsi  | 16 +++++++-------
 arch/arm64/boot/dts/qcom/ipq5332.dtsi  | 16 +++++++-------
 arch/arm64/boot/dts/qcom/ipq5424.dtsi  | 32 +++++++++++++--------------
 arch/arm64/boot/dts/qcom/ipq6018.dtsi  |  8 +++----
 arch/arm64/boot/dts/qcom/ipq8074.dtsi  | 16 +++++++-------
 arch/arm64/boot/dts/qcom/ipq9574.dtsi  | 32 +++++++++++++--------------
 arch/arm64/boot/dts/qcom/msm8996.dtsi  | 24 ++++++++++----------
 arch/arm64/boot/dts/qcom/sar2130p.dtsi | 16 +++++++-------
 arch/arm64/boot/dts/qcom/sc7280.dtsi   | 16 +++++++-------
 arch/arm64/boot/dts/qcom/sc8180x.dtsi  | 32 +++++++++++++--------------
 arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 40 +++++++++++++++++-----------------
 arch/arm64/boot/dts/qcom/sdm845.dtsi   | 16 +++++++-------
 arch/arm64/boot/dts/qcom/sm8150.dtsi   | 16 +++++++-------
 arch/arm64/boot/dts/qcom/sm8250.dtsi   | 24 ++++++++++----------
 arch/arm64/boot/dts/qcom/sm8350.dtsi   | 16 +++++++-------
 arch/arm64/boot/dts/qcom/sm8450.dtsi   | 16 +++++++-------
 arch/arm64/boot/dts/qcom/sm8550.dtsi   | 16 +++++++-------
 arch/arm64/boot/dts/qcom/sm8650.dtsi   | 16 +++++++-------
 arch/arm64/boot/dts/qcom/x1e80100.dtsi | 24 ++++++++++----------
 19 files changed, 196 insertions(+), 196 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
index 4ddb56d63f8f9a963cb49bc20e0a78b2d3490344..46c797a9b79ef79f026b4093f782bdf87e79688d 100644
--- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
@@ -745,10 +745,10 @@ pcie1: pcie@80000000 {
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 142 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 0 143 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 0 144 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 0 145 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_SYS_NOC_PCIE1_AXI_CLK>,
 				 <&gcc GCC_PCIE1_AXI_M_CLK>,
@@ -846,10 +846,10 @@ pcie0: pcie@a0000000 {
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 75 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 0 78 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 0 79 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 0 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
 				 <&gcc GCC_PCIE0_AXI_M_CLK>,
diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
index bd28c490415ff61624f6ff0461d79e975f2c397f..45fc512a3bab221c0d99f819294abf63369987da 100644
--- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
@@ -632,10 +632,10 @@ pcie1: pcie@18000000 {
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 412 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 0 413 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 0 414 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 0 415 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_PCIE3X2_AXI_M_CLK>,
 				 <&gcc GCC_PCIE3X2_AXI_S_CLK>,
@@ -736,10 +736,10 @@ pcie0: pcie@20000000 {
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 35 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 0 36 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 0 37 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 0 38 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_PCIE3X1_0_AXI_M_CLK>,
 				 <&gcc GCC_PCIE3X1_0_AXI_S_CLK>,
diff --git a/arch/arm64/boot/dts/qcom/ipq5424.dtsi b/arch/arm64/boot/dts/qcom/ipq5424.dtsi
index b1a86b54c30f30fbb66057cf4e79ada6ebc29d89..67877fbbdf3a0dcb587e696ed4241f1075000366 100644
--- a/arch/arm64/boot/dts/qcom/ipq5424.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5424.dtsi
@@ -856,10 +856,10 @@ pcie3: pcie@40000000 {
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 479 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 480 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 481 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 482 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc GIC_SPI 480 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc GIC_SPI 482 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_PCIE3_AXI_M_CLK>,
 				 <&gcc GCC_PCIE3_AXI_S_CLK>,
@@ -959,10 +959,10 @@ pcie2: pcie@50000000 {
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 464 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 465 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 466 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 467 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_PCIE2_AXI_M_CLK>,
 				 <&gcc GCC_PCIE2_AXI_S_CLK>,
@@ -1062,10 +1062,10 @@ pcie1: pcie@60000000 {
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 449 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 450 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 451 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 452 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_PCIE1_AXI_M_CLK>,
 				 <&gcc GCC_PCIE1_AXI_S_CLK>,
@@ -1165,10 +1165,10 @@ pcie0: pcie@70000000 {
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 436 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 437 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc GIC_SPI 436 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc GIC_SPI 437 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_PCIE0_AXI_M_CLK>,
 				 <&gcc GCC_PCIE0_AXI_S_CLK>,
diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index bfe59b0208415902c69fd0c0c7565d97997d4207..40f1c262126eff3761430a47472b52d27f961040 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -906,10 +906,10 @@ pcie0: pcie@20000000 {
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 0 75 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 0 0 78 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 0 0 79 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 0 0 83 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 0 GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 0 GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 0 GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
 				 <&gcc GCC_PCIE0_AXI_M_CLK>,
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index fffb47ec244899cf45984adbe8c4f9820bef5c5f..256e12cf6d54417582a8b50e061f40719a4004a1 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -867,13 +867,13 @@ pcie1: pcie@10000000 {
 					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 142
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 142
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 0 143
+					<0 0 0 2 &intc 0 GIC_SPI 143
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 0 144
+					<0 0 0 3 &intc 0 GIC_SPI 144
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 0 145
+					<0 0 0 4 &intc 0 GIC_SPI 145
 					 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_SYS_NOC_PCIE1_AXI_CLK>,
@@ -955,13 +955,13 @@ pcie0: pcie@20000000 {
 					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 75
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 75
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 0 78
+					<0 0 0 2 &intc 0 GIC_SPI 78
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 0 79
+					<0 0 0 3 &intc 0 GIC_SPI 79
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 0 83
+					<0 0 0 4 &intc 0 GIC_SPI 83
 					 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
index 815b5f9540b80e91e81e02a97b20c0426f40b003..f66617f187cafeb55b06c761a52122bc6097f9b6 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
@@ -946,10 +946,10 @@ pcie1: pcie@10000000 {
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 35 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 0 49 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 0 84 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 0 85 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_PCIE1_AXI_M_CLK>,
 				 <&gcc GCC_PCIE1_AXI_S_CLK>,
@@ -1032,10 +1032,10 @@ pcie3: pcie@18000000 {
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 189 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 0 190 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 0 191 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 0 192 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_PCIE3_AXI_M_CLK>,
 				 <&gcc GCC_PCIE3_AXI_S_CLK>,
@@ -1118,10 +1118,10 @@ pcie2: pcie@20000000 {
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 164 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 0 165 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 0 186 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 0 187 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_PCIE2_AXI_M_CLK>,
 				 <&gcc GCC_PCIE2_AXI_S_CLK>,
@@ -1203,10 +1203,10 @@ pcie0: pci@28000000 {
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 75 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 0 78 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 0 79 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 0 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_PCIE0_AXI_M_CLK>,
 				 <&gcc GCC_PCIE0_AXI_S_CLK>,
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index b5aab21ac5250029ee60987a1e64871ba4e2be6d..c75b522f6eba66afeb71be5d81624183641bde71 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -1928,10 +1928,10 @@ pcie0: pcie@600000 {
 						  "msi7";
 				#interrupt-cells = <1>;
 				interrupt-map-mask = <0 0 0 0x7>;
-				interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-						<0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-						<0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-						<0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+				interrupt-map = <0 0 0 1 &intc GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+						<0 0 0 2 &intc GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+						<0 0 0 3 &intc GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+						<0 0 0 4 &intc GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 				pinctrl-names = "default", "sleep";
 				pinctrl-0 = <&pcie0_state_on>;
@@ -2005,10 +2005,10 @@ pcie1: pcie@608000 {
 						  "msi7";
 				#interrupt-cells = <1>;
 				interrupt-map-mask = <0 0 0 0x7>;
-				interrupt-map = <0 0 0 1 &intc 0 272 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-						<0 0 0 2 &intc 0 273 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-						<0 0 0 3 &intc 0 274 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-						<0 0 0 4 &intc 0 275 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+				interrupt-map = <0 0 0 1 &intc GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+						<0 0 0 2 &intc GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+						<0 0 0 3 &intc GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+						<0 0 0 4 &intc GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 				pinctrl-names = "default", "sleep";
 				pinctrl-0 = <&pcie1_state_on>;
@@ -2080,10 +2080,10 @@ pcie2: pcie@610000 {
 						  "msi7";
 				#interrupt-cells = <1>;
 				interrupt-map-mask = <0 0 0 0x7>;
-				interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-						<0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-						<0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-						<0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+				interrupt-map = <0 0 0 1 &intc GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+						<0 0 0 2 &intc GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+						<0 0 0 3 &intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+						<0 0 0 4 &intc GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 				pinctrl-names = "default", "sleep";
 				pinctrl-0 = <&pcie2_state_on>;
diff --git a/arch/arm64/boot/dts/qcom/sar2130p.dtsi b/arch/arm64/boot/dts/qcom/sar2130p.dtsi
index 38f7869616ff01ece3799ced15c39375d629e364..96c4d2e06d9a9ec22d968c1e4bbb5723f18223d1 100644
--- a/arch/arm64/boot/dts/qcom/sar2130p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sar2130p.dtsi
@@ -1303,10 +1303,10 @@ pcie0: pcie@1c00000 {
 					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 0 GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 0 GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 0 GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
 				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
@@ -1422,10 +1422,10 @@ pcie1: pcie@1c08000 {
 					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 0 GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 0 GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 0 GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
 				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 0dd6a5c91d109c78333f6b90104fa51fcf3bd64c..8561fc21722991860f59b5406ad084c2a30d3003 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -2240,10 +2240,10 @@ pcie0: pcie@1c00000 {
 					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
 				 <&gcc GCC_PCIE_0_PIPE_CLK_SRC>,
@@ -2369,10 +2369,10 @@ pcie1: pcie@1c08000 {
 					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
 				 <&gcc GCC_PCIE_1_PIPE_CLK_SRC>,
diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
index 15a75def6204a35d5852e73d66fd3052e38e7863..ae27a055eeeeb52a9a73f573f553abb0d6bd0d02 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
@@ -1740,10 +1740,10 @@ pcie0: pcie@1c00000 {
 					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
 				 <&gcc GCC_PCIE_0_AUX_CLK>,
@@ -1859,10 +1859,10 @@ pcie3: pcie@1c08000 {
 					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_3_PIPE_CLK>,
 				 <&gcc GCC_PCIE_3_AUX_CLK>,
@@ -1979,10 +1979,10 @@ pcie1: pcie@1c10000 {
 					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 747 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 746 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 745 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 744 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 747 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 746 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 745 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 744 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
 				 <&gcc GCC_PCIE_1_AUX_CLK>,
@@ -2099,10 +2099,10 @@ pcie2: pcie@1c18000 {
 					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 663 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 662 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 661 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 660 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 663 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 662 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 661 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 660 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_2_PIPE_CLK>,
 				 <&gcc GCC_PCIE_2_AUX_CLK>,
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index 421693208af0d5baeaa14ba2bbf29cbbc677e732..cd2049fbfa01aaae10876f4b33410a33effa3ce2 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -1809,10 +1809,10 @@ pcie4: pcie@1c00000 {
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 0 GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 0 GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 0 GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 GIC_SPI GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 GIC_SPI GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 GIC_SPI GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_PCIE_4_AUX_CLK>,
 				 <&gcc GCC_PCIE_4_CFG_AHB_CLK>,
@@ -1922,10 +1922,10 @@ pcie3b: pcie@1c08000 {
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 526 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 0 GIC_SPI 527 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 0 GIC_SPI 528 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 0 GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI GIC_SPI 526 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 GIC_SPI GIC_SPI 527 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 GIC_SPI GIC_SPI 528 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 GIC_SPI GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_PCIE_3B_AUX_CLK>,
 				 <&gcc GCC_PCIE_3B_CFG_AHB_CLK>,
@@ -2033,10 +2033,10 @@ pcie3a: pcie@1c10000 {
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 0 GIC_SPI 542 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 0 GIC_SPI 543 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 0 GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 GIC_SPI GIC_SPI 542 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 GIC_SPI GIC_SPI 543 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 GIC_SPI GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_PCIE_3A_AUX_CLK>,
 				 <&gcc GCC_PCIE_3A_CFG_AHB_CLK>,
@@ -2147,10 +2147,10 @@ pcie2b: pcie@1c18000 {
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 0 GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 0 GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 0 GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 GIC_SPI GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 GIC_SPI GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 GIC_SPI GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_PCIE_2B_AUX_CLK>,
 				 <&gcc GCC_PCIE_2B_CFG_AHB_CLK>,
@@ -2258,10 +2258,10 @@ pcie2a: pcie@1c20000 {
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 0 GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 0 GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 0 GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 GIC_SPI GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 GIC_SPI GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 GIC_SPI GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_PCIE_2A_AUX_CLK>,
 				 <&gcc GCC_PCIE_2A_CFG_AHB_CLK>,
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 828b55cb6baf10458feae8f53c04663ef958601e..258f964f39172b319c07e483eff2d9b50371c73c 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -2347,10 +2347,10 @@ pcie0: pcie@1c00000 {
 					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 0 GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 0 GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 0 GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
 				 <&gcc GCC_PCIE_0_AUX_CLK>,
@@ -2472,10 +2472,10 @@ pcie1: pcie@1c08000 {
 					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 0 GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 0 GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 0 GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
 				 <&gcc GCC_PCIE_1_AUX_CLK>,
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 12e7b74cde520009d73d381adfa1deeb8788621b..6860816db6d27f3449b270df0a22aff868775ed4 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -1866,10 +1866,10 @@ pcie0: pcie@1c00000 {
 					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
 				 <&gcc GCC_PCIE_0_AUX_CLK>,
@@ -1981,10 +1981,10 @@ pcie1: pcie@1c08000 {
 					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
 				 <&gcc GCC_PCIE_1_AUX_CLK>,
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 8e0eb802d68e9670a10cd6e227bd1eccbd872866..6591b8172e089453b02208fbcd7a40abbf42e4f9 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -2163,10 +2163,10 @@ pcie0: pcie@1c00000 {
 					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
 				 <&gcc GCC_PCIE_0_AUX_CLK>,
@@ -2285,10 +2285,10 @@ pcie1: pcie@1c08000 {
 					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
 				 <&gcc GCC_PCIE_1_AUX_CLK>,
@@ -2412,10 +2412,10 @@ pcie2: pcie@1c10000 {
 					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 290 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 415 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 416 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 417 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_2_PIPE_CLK>,
 				 <&gcc GCC_PCIE_2_AUX_CLK>,
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index acaf40298f2e353e81793639522d0b0c52f6179f..de1fae97ce447b47db1fab3abaa6456478fe04b3 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -1551,10 +1551,10 @@ pcie0: pcie@1c00000 {
 					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
 				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
@@ -1662,10 +1662,10 @@ pcie1: pcie@1c08000 {
 					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
 				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 2baef6869ed7c17efb239e86013c15ef6ef5f48f..b31c09ec61a989c8e90a23559d540c2eea2265c3 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -1987,10 +1987,10 @@ pcie0: pcie@1c00000 {
 					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 0 GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 0 GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 0 GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			interconnects = <&pcie_noc MASTER_PCIE_0 QCOM_ICC_TAG_ALWAYS
 					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
@@ -2151,10 +2151,10 @@ pcie1: pcie@1c08000 {
 					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 0 GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 0 GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 0 GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			interconnects = <&pcie_noc MASTER_PCIE_1 QCOM_ICC_TAG_ALWAYS
 					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index 38d139d1dd4a994287c03d064ca01d59a11ac771..4a04b027f2f5a89aefcaddd01dd461cb87598db1 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -1981,10 +1981,10 @@ pcie0: pcie@1c00000 {
 					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 0 GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 0 GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 0 GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
 				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
@@ -2142,10 +2142,10 @@ pcie1: pcie@1c08000 {
 					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 0 GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 0 GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 0 GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
 				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi
index d6794901f06b50e8629afd081cb7d229ea342f84..7ffdd26ff6143b5b72c1b9dd97ff26898b7ff91b 100644
--- a/arch/arm64/boot/dts/qcom/sm8650.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi
@@ -3629,10 +3629,10 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
 			iommu-map = <0     &apps_smmu 0x1400 0x1>,
 				    <0x100 &apps_smmu 0x1401 0x1>;
 
-			interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH 0>,
-					<0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH 0>,
-					<0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH 0>,
-					<0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH 0>;
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH 0>,
+					<0 0 0 2 &intc 0 0 GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH 0>,
+					<0 0 0 3 &intc 0 0 GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH 0>,
+					<0 0 0 4 &intc 0 0 GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-map-mask = <0 0 0 0x7>;
 			#interrupt-cells = <1>;
 
@@ -3809,10 +3809,10 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
 			iommu-map = <0     &apps_smmu 0x1480 0x1>,
 				    <0x100 &apps_smmu 0x1481 0x1>;
 
-			interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH 0>,
-					<0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH 0>,
-					<0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH 0>,
-					<0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH 0>;
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH 0>,
+					<0 0 0 2 &intc 0 0 GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH 0>,
+					<0 0 0 3 &intc 0 0 GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH 0>,
+					<0 0 0 4 &intc 0 0 GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-map-mask = <0 0 0 0x7>;
 			#interrupt-cells = <1>;
 
diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
index f293b13ecc0ce426661187ac793f147d12434fcb..e61c9010a3f2febadaffcaf935fa1fd1b658a5ad 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
@@ -3404,10 +3404,10 @@ pcie6a: pci@1bf8000 {
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 0 843 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 0 0 844 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 0 0 845 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 0 0 772 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 843 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 GIC_SPI 844 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 GIC_SPI 845 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 GIC_SPI 772 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_PCIE_6A_AUX_CLK>,
 				 <&gcc GCC_PCIE_6A_CFG_AHB_CLK>,
@@ -3536,10 +3536,10 @@ pcie5: pci@1c00000 {
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 0 70 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 0 0 71 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 0 0 72 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 0 0 73 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_PCIE_5_AUX_CLK>,
 				 <&gcc GCC_PCIE_5_CFG_AHB_CLK>,
@@ -3666,10 +3666,10 @@ pcie4: pci@1c08000 {
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_PCIE_4_AUX_CLK>,
 				 <&gcc GCC_PCIE_4_CFG_AHB_CLK>,

-- 
2.48.1

[PATCH 11/15] ARM: dts: qcom: ipq4019: Add default GIC address cells

[Krzysztof Kozlowski]

Add missing address-cells 0 to GIC interrupt node to silence W=1
warning:

  qcom-ipq4019.dtsi:431.4-434.30: Warning (interrupt_map): /soc/pcie@40000000:interrupt-map:
    Missing property '#address-cells' in node /soc/interrupt-controller@b000000, using 0 as fallback

Value '0' is correct because:
1. GIC interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
   the fourth component "parent unit address", which size is defined by
   '#address-cells' of the node pointed to by the interrupt-parent
   component, is not used (=0).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
index f77542fb3d4fc2fe5998aaea092d62f482af1672..5bf5027e1ad98fef92a012fefe0450c5a3df7e0f 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
@@ -175,6 +175,7 @@ soc {
 		intc: interrupt-controller@b000000 {
 			compatible = "qcom,msm-qgic2";
 			interrupt-controller;
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			reg = <0x0b000000 0x1000>,
 			<0x0b002000 0x1000>;

-- 
2.48.1

[PATCH 12/15] ARM: dts: qcom: apq8064: Add default GIC address cells

[Krzysztof Kozlowski]

Add missing address-cells 0 to GIC interrupt node to silence W=1
warning:

  qcom-apq8064.dtsi:1353.4-1356.29: Warning (interrupt_map): /soc/pcie@1b500000:interrupt-map:
    Missing property '#address-cells' in node /soc/interrupt-controller@2000000, using 0 as fallback

Value '0' is correct because:
1. GIC interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
   the fourth component "parent unit address", which size is defined by
   '#address-cells' of the node pointed to by the interrupt-parent
   component, is not used (=0).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm/boot/dts/qcom/qcom-apq8064.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
index 17e506ca2438b33675477b65584c2b15bc1ae11d..4c9743423ea880515a05148091ed97411f08e8a3 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
@@ -342,6 +342,7 @@ sfpb_mutex: hwmutex@1200600 {
 		intc: interrupt-controller@2000000 {
 			compatible = "qcom,msm-qgic2";
 			interrupt-controller;
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			reg = <0x02000000 0x1000>,
 			      <0x02002000 0x1000>;

-- 
2.48.1

[PATCH 13/15] ARM: dts: qcom: ipq8064: Add default GIC address cells

[Krzysztof Kozlowski]

Add missing address-cells 0 to GIC interrupt node to silence W=1
warning:

  qcom-ipq8064.dtsi:1201.4-1204.29: Warning (interrupt_map): /soc/pcie@1b900000:interrupt-map:
    Missing property '#address-cells' in node /soc/interrupt-controller@2000000, using 0 as fallback

Value '0' is correct because:
1. GIC interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
   the fourth component "parent unit address", which size is defined by
   '#address-cells' of the node pointed to by the interrupt-parent
   component, is not used (=0).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
index 96e97350153506922b7560131e33664d51e891b5..03299078fc5a2cdf9037770e9de2951efce9b487 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
@@ -527,6 +527,7 @@ sfpb_mutex: hwlock@1200600 {
 		intc: interrupt-controller@2000000 {
 			compatible = "qcom,msm-qgic2";
 			interrupt-controller;
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			reg = <0x02000000 0x1000>,
 			      <0x02002000 0x1000>;

-- 
2.48.1

[PATCH 14/15] ARM: dts: qcom: sdx55: Add default GIC address cells

[Krzysztof Kozlowski]

Add missing address-cells 0 to GIC interrupt node to silence W=1
warning:

  qcom-sdx55.dtsi:343.4-346.30: Warning (interrupt_map): /soc/pcie@1c00000:interrupt-map:
    Missing property '#address-cells' in node /soc/interrupt-controller@17800000, using 0 as fallback

Value '0' is correct because:
1. GIC interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
   the fourth component "parent unit address", which size is defined by
   '#address-cells' of the node pointed to by the interrupt-parent
   component, is not used (=0).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm/boot/dts/qcom/qcom-sdx55.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
index 20fdae9825e0c709596b88c1cf710fcd8d339341..8d0aabfa1ee06f5bcebdbfd8ff620f500de7fb78 100644
--- a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
@@ -707,6 +707,7 @@ intc: interrupt-controller@17800000 {
 			compatible = "qcom,msm-qgic2";
 			interrupt-controller;
 			interrupt-parent = <&intc>;
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			reg = <0x17800000 0x1000>,
 			      <0x17802000 0x1000>;

-- 
2.48.1

[PATCH 15/15] ARM: dts: qcom: Use GIC_SPI for interrupt-map for readability

[Krzysztof Kozlowski]

Decoding interrupt-map is tricky, because it consists of five
components.  Use known GIC_SPI define in final interrupt specifier
component makes easier to read.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm/boot/dts/qcom/qcom-apq8064.dtsi |  8 ++++----
 arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi |  8 ++++----
 arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi | 24 ++++++++++++------------
 arch/arm/boot/dts/qcom/qcom-sdx55.dtsi   |  8 ++++----
 4 files changed, 24 insertions(+), 24 deletions(-)

diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
index 4c9743423ea880515a05148091ed97411f08e8a3..09062b2ad8ba550c3c2ee5849c96fb68fa2dff4b 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
@@ -1351,10 +1351,10 @@ pcie: pcie@1b500000 {
 			interrupt-names = "msi";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 			clocks = <&gcc PCIE_A_CLK>,
 				 <&gcc PCIE_H_CLK>,
 				 <&gcc PCIE_PHY_REF_CLK>;
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
index 5bf5027e1ad98fef92a012fefe0450c5a3df7e0f..8eeaab1c0be11175162b0ac17751ad48bcf293aa 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
@@ -429,10 +429,10 @@ pcie0: pcie@40000000 {
 			interrupt-names = "msi";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 			clocks = <&gcc GCC_PCIE_AHB_CLK>,
 				 <&gcc GCC_PCIE_AXI_M_CLK>,
 				 <&gcc GCC_PCIE_AXI_S_CLK>;
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
index 03299078fc5a2cdf9037770e9de2951efce9b487..adedcc6da1da5eafca3d403dc7a6547e2729ed98 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
@@ -1077,10 +1077,10 @@ pcie0: pcie@1b500000 {
 			interrupt-names = "msi";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc PCIE_A_CLK>,
 				 <&gcc PCIE_H_CLK>,
@@ -1138,10 +1138,10 @@ pcie1: pcie@1b700000 {
 			interrupt-names = "msi";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 58 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 59 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 60 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 61 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc PCIE_1_A_CLK>,
 				 <&gcc PCIE_1_H_CLK>,
@@ -1199,10 +1199,10 @@ pcie2: pcie@1b900000 {
 			interrupt-names = "msi";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 72 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 73 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 74 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc PCIE_2_A_CLK>,
 				 <&gcc PCIE_2_H_CLK>,
diff --git a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
index 8d0aabfa1ee06f5bcebdbfd8ff620f500de7fb78..05b79281df571d1ac3b396588a43fa5558494426 100644
--- a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
@@ -340,10 +340,10 @@ pcie_rc: pcie@1c00000 {
 					  "msi8";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 141 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_PIPE_CLK>,
 				 <&gcc GCC_PCIE_AUX_CLK>,

-- 
2.48.1

Re: (subset) [PATCH 00/15] arm64: dts: qcom: Fix interrupt-map dtc W=1 warning and cleanup

[Bjorn Andersson]

On Fri, 22 Aug 2025 14:04:00 +0200, Krzysztof Kozlowski wrote:
> Get rid of one dtc W=1 warning and cleanup (verified with dtx_diff).
> 
> Best regards,
> Krzysztof
> 

Applied, thanks!

[01/15] arm64: dts: qcom: ipq5424: Add default GIC address cells
        commit: dc3f005e6b1f5b49ff70b98164badd664978d60e
[02/15] arm64: dts: qcom: lemans: Add default GIC address cells
        commit: 0eb765666714ea310439107bab3182430cc4d11d
[03/15] arm64: dts: qcom: msm8996: Add default GIC address cells
        commit: d434b7198a115a54c5f28bdffb6b77196c85758c
[04/15] arm64: dts: qcom: qcs404: Add default GIC address cells
        commit: 0325653b1adeb8f47dd46874e4fe8ec894a3bbb0
[05/15] arm64: dts: qcom: sc8180x: Add default GIC address cells
        commit: 6cfdee6dca1e5073b52eda54fceb193a80651576
[06/15] arm64: dts: qcom: sm6150: Add default GIC address cells
        commit: b8159aaf5ece22de52276d75b8b7d5ec517fe207
[07/15] arm64: dts: qcom: sm8150: Add default GIC address cells
        commit: d0054c3e5b8f737cda22c4b7625b8979fa3c8310
[08/15] arm64: dts: qcom: sm8250: Add default GIC address cells
        commit: 3e17f489e3f46ffe21d3d9d769b75ddf24905707
[09/15] arm64: dts: qcom: sm8350: Add default GIC address cells
        commit: 9c18757804e66304ed0287ed874a3575c7cb77e4
[10/15] arm64: dts: qcom: Use GIC_SPI for interrupt-map for readability
        commit: 2f8c7b179f283876871b9359be3ed947c9c56b56

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>

Re: (subset) [PATCH 00/15] arm64: dts: qcom: Fix interrupt-map dtc W=1 warning and cleanup

[Bjorn Andersson]

On Fri, 22 Aug 2025 14:04:00 +0200, Krzysztof Kozlowski wrote:
> Get rid of one dtc W=1 warning and cleanup (verified with dtx_diff).
> 
> Best regards,
> Krzysztof
> 

Applied, thanks!

[11/15] ARM: dts: qcom: ipq4019: Add default GIC address cells
        commit: 7d75eda45690ce17a2935174a7ed370dfeeb48ef
[12/15] ARM: dts: qcom: apq8064: Add default GIC address cells
        commit: 1e54cf1f383adde02e49ccc9bb0cb9d3b0662a1e
[13/15] ARM: dts: qcom: ipq8064: Add default GIC address cells
        commit: 014a53ed24e33cc2cab112ad17df60d15ec97997
[14/15] ARM: dts: qcom: sdx55: Add default GIC address cells
        commit: 27cc4d100495faa0fa7272ef8fb9fc3e3abc4349
[15/15] ARM: dts: qcom: Use GIC_SPI for interrupt-map for readability
        commit: ba1045c76be299896528ac48021501fc9de78512

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>