[PATCHv4 3/3] mips: qca: specify WMAC LED directly

[Rosen Penev <rosenp@gmail.com>]

The ath9k driver creates an LED unconditionally being driven with
sometimes the wrong pin. Not only that, the current dts definitions have
LEDs for the WMAC that do not behave in response to it. Fix both issues.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
 arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts |  9 ++++-----
 arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts   | 11 +++++------
 arch/mips/boot/dts/qca/ar9331_tl_mr3020.dts      | 11 +++++------
 3 files changed, 14 insertions(+), 17 deletions(-)

diff --git a/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts b/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts
index a7901bb040ce..0e813c38c31c 100644
--- a/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts
+++ b/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts
@@ -56,11 +56,6 @@ led-2 {
 			label = "tp-link:green:qss";
 			gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
 		};
-
-		led-3 {
-			label = "tp-link:green:wlan";
-			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
-		};
 	};
 };
 
@@ -111,4 +106,8 @@ partition@2 {
 
 &wifi {
 	status = "okay";
+
+	led {
+		reg = <9>;
+	};
 };
diff --git a/arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts b/arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts
index 37a74aabe4b4..19d72a0fdd8d 100644
--- a/arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts
+++ b/arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts
@@ -22,12 +22,6 @@ memory@0 {
 	leds {
 		compatible = "gpio-leds";
 
-		led-wlan {
-			label = "dragino2:red:wlan";
-			gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
 		led-lan {
 			label = "dragino2:red:lan";
 			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
@@ -101,4 +95,9 @@ spiflash: w25q128@0 {
 
 &wifi {
 	status = "okay";
+
+	led {
+		reg = <0>;
+		led-active-high;
+	};
 };
diff --git a/arch/mips/boot/dts/qca/ar9331_tl_mr3020.dts b/arch/mips/boot/dts/qca/ar9331_tl_mr3020.dts
index a7108c803eb3..c12dd4a72772 100644
--- a/arch/mips/boot/dts/qca/ar9331_tl_mr3020.dts
+++ b/arch/mips/boot/dts/qca/ar9331_tl_mr3020.dts
@@ -22,12 +22,6 @@ memory@0 {
 	leds {
 		compatible = "gpio-leds";
 
-		led-wlan {
-			label = "tp-link:green:wlan";
-			gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
 		led-lan {
 			label = "tp-link:green:lan";
 			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
@@ -117,4 +111,9 @@ spiflash: s25sl032p@0 {
 
 &wifi {
 	status = "okay";
+
+	led {
+		reg = <0>;
+		led-active-high;
+	};
 };
-- 
2.50.1