[PATCH 0/5] iio: adc: samsung: Simplify, cleanup and drop S3C2410

[PATCH 0/5] iio: adc: samsung: Simplify, cleanup and drop S3C2410

[Krzysztof Kozlowski]

S3C2410 is gone from kernel, so we can drop its support and remaining
related pieces.

Best regards,
Krzysztof

---
Krzysztof Kozlowski (5):
      iio: adc: exynos_adc: Drop S3C2410 support
      iio: adc: exynos_adc: Drop touchscreen support
      iio: adc: exynos_adc: Drop platform data support
      dt-bindings: iio: adc: samsung,exynos: Drop S3C2410
      dt-bindings: iio: adc: samsung,exynos: Drop touchscreen support

 .../bindings/iio/adc/samsung,exynos-adc.yaml       |  23 +-
 drivers/iio/adc/exynos_adc.c                       | 280 +--------------------
 2 files changed, 4 insertions(+), 299 deletions(-)
---
base-commit: 3cace99d63192a7250461b058279a42d91075d0c
change-id: 20250830-s3c-cleanup-adc-71ac80978520

Best regards,
-- 
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

[PATCH 1/5] iio: adc: exynos_adc: Drop S3C2410 support

[Krzysztof Kozlowski]

Samsung S3C24xx family of SoCs was removed from the Linux kernel in the
commit 61b7f8920b17 ("ARM: s3c: remove all s3c24xx support"), in January
2023.  There are no in-kernel users of its compatibles.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 drivers/iio/adc/exynos_adc.c | 75 +-------------------------------------------
 1 file changed, 1 insertion(+), 74 deletions(-)

diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c
index 4614cf848535944a41e0ab19f35c5ca0546000c0..17fd33c6bd6d0dcf41771331ecb328e58d820ed0 100644
--- a/drivers/iio/adc/exynos_adc.c
+++ b/drivers/iio/adc/exynos_adc.c
@@ -44,9 +44,6 @@
 #define ADC_V1_MUX(x)		((x) + 0x1c)
 #define ADC_V1_CLRINTPNDNUP(x)	((x) + 0x20)
 
-/* S3C2410 ADC registers definitions */
-#define ADC_S3C2410_MUX(x)	((x) + 0x18)
-
 /* Future ADC_V2 registers definitions */
 #define ADC_V2_CON1(x)		((x) + 0x00)
 #define ADC_V2_CON2(x)		((x) + 0x04)
@@ -61,10 +58,8 @@
 #define ADC_V1_CON_PRSCLV(x)	(((x) & 0xFF) << 6)
 #define ADC_V1_CON_STANDBY	(1u << 2)
 
-/* Bit definitions for S3C2410 ADC */
+/* Bit definitions for S3C2410 / S3C6410 ADC */
 #define ADC_S3C2410_CON_SELMUX(x) (((x) & 7) << 3)
-#define ADC_S3C2410_DATX_MASK	0x3FF
-#define ADC_S3C2416_CON_RES_SEL	(1u << 3)
 
 /* touch screen always uses channel 0 */
 #define ADC_S3C2410_MUX_TS	0
@@ -307,53 +302,6 @@ static const struct exynos_adc_data exynos_adc_s5pv210_data = {
 	.start_conv	= exynos_adc_v1_start_conv,
 };
 
-static void exynos_adc_s3c2416_start_conv(struct exynos_adc *info,
-					  unsigned long addr)
-{
-	u32 con1;
-
-	/* Enable 12 bit ADC resolution */
-	con1 = readl(ADC_V1_CON(info->regs));
-	con1 |= ADC_S3C2416_CON_RES_SEL;
-	writel(con1, ADC_V1_CON(info->regs));
-
-	/* Select channel for S3C2416 */
-	writel(addr, ADC_S3C2410_MUX(info->regs));
-
-	con1 = readl(ADC_V1_CON(info->regs));
-	writel(con1 | ADC_CON_EN_START, ADC_V1_CON(info->regs));
-}
-
-static struct exynos_adc_data const exynos_adc_s3c2416_data = {
-	.num_channels	= MAX_ADC_V1_CHANNELS,
-	.mask		= ADC_DATX_MASK,	/* 12 bit ADC resolution */
-
-	.init_hw	= exynos_adc_v1_init_hw,
-	.exit_hw	= exynos_adc_v1_exit_hw,
-	.start_conv	= exynos_adc_s3c2416_start_conv,
-};
-
-static void exynos_adc_s3c2443_start_conv(struct exynos_adc *info,
-					  unsigned long addr)
-{
-	u32 con1;
-
-	/* Select channel for S3C2433 */
-	writel(addr, ADC_S3C2410_MUX(info->regs));
-
-	con1 = readl(ADC_V1_CON(info->regs));
-	writel(con1 | ADC_CON_EN_START, ADC_V1_CON(info->regs));
-}
-
-static struct exynos_adc_data const exynos_adc_s3c2443_data = {
-	.num_channels	= MAX_ADC_V1_CHANNELS,
-	.mask		= ADC_S3C2410_DATX_MASK, /* 10 bit ADC resolution */
-
-	.init_hw	= exynos_adc_v1_init_hw,
-	.exit_hw	= exynos_adc_v1_exit_hw,
-	.start_conv	= exynos_adc_s3c2443_start_conv,
-};
-
 static void exynos_adc_s3c64xx_start_conv(struct exynos_adc *info,
 					  unsigned long addr)
 {
@@ -365,15 +313,6 @@ static void exynos_adc_s3c64xx_start_conv(struct exynos_adc *info,
 	writel(con1 | ADC_CON_EN_START, ADC_V1_CON(info->regs));
 }
 
-static struct exynos_adc_data const exynos_adc_s3c24xx_data = {
-	.num_channels	= MAX_ADC_V1_CHANNELS,
-	.mask		= ADC_S3C2410_DATX_MASK, /* 10 bit ADC resolution */
-
-	.init_hw	= exynos_adc_v1_init_hw,
-	.exit_hw	= exynos_adc_v1_exit_hw,
-	.start_conv	= exynos_adc_s3c64xx_start_conv,
-};
-
 static struct exynos_adc_data const exynos_adc_s3c64xx_data = {
 	.num_channels	= MAX_ADC_V1_CHANNELS,
 	.mask		= ADC_DATX_MASK,	/* 12 bit ADC resolution */
@@ -486,18 +425,6 @@ static const struct exynos_adc_data exynos7_adc_data = {
 
 static const struct of_device_id exynos_adc_match[] = {
 	{
-		.compatible = "samsung,s3c2410-adc",
-		.data = &exynos_adc_s3c24xx_data,
-	}, {
-		.compatible = "samsung,s3c2416-adc",
-		.data = &exynos_adc_s3c2416_data,
-	}, {
-		.compatible = "samsung,s3c2440-adc",
-		.data = &exynos_adc_s3c24xx_data,
-	}, {
-		.compatible = "samsung,s3c2443-adc",
-		.data = &exynos_adc_s3c2443_data,
-	}, {
 		.compatible = "samsung,s3c6410-adc",
 		.data = &exynos_adc_s3c64xx_data,
 	}, {

-- 
2.48.1

[PATCH 2/5] iio: adc: exynos_adc: Drop touchscreen support

[Krzysztof Kozlowski]

With last user of touchscreen via ADC (S3C24xx SoC) gone, drop the
remaining code from Samsung SoC ADC driver.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 drivers/iio/adc/exynos_adc.c | 196 +------------------------------------------
 1 file changed, 1 insertion(+), 195 deletions(-)

diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c
index 17fd33c6bd6d0dcf41771331ecb328e58d820ed0..30f6d8436e775a8d2177951b436cd45152307ea2 100644
--- a/drivers/iio/adc/exynos_adc.c
+++ b/drivers/iio/adc/exynos_adc.c
@@ -19,11 +19,9 @@
 #include <linux/clk.h>
 #include <linux/completion.h>
 #include <linux/of.h>
-#include <linux/of_irq.h>
 #include <linux/regulator/consumer.h>
 #include <linux/of_platform.h>
 #include <linux/err.h>
-#include <linux/input.h>
 
 #include <linux/iio/iio.h>
 #include <linux/iio/machine.h>
@@ -35,14 +33,12 @@
 
 /* S3C/EXYNOS4412/5250 ADC_V1 registers definitions */
 #define ADC_V1_CON(x)		((x) + 0x00)
-#define ADC_V1_TSC(x)		((x) + 0x04)
 #define ADC_V1_DLY(x)		((x) + 0x08)
 #define ADC_V1_DATX(x)		((x) + 0x0C)
 #define ADC_V1_DATY(x)		((x) + 0x10)
 #define ADC_V1_UPDN(x)		((x) + 0x14)
 #define ADC_V1_INTCLR(x)	((x) + 0x18)
 #define ADC_V1_MUX(x)		((x) + 0x1c)
-#define ADC_V1_CLRINTPNDNUP(x)	((x) + 0x20)
 
 /* Future ADC_V2 registers definitions */
 #define ADC_V2_CON1(x)		((x) + 0x00)
@@ -61,17 +57,12 @@
 /* Bit definitions for S3C2410 / S3C6410 ADC */
 #define ADC_S3C2410_CON_SELMUX(x) (((x) & 7) << 3)
 
-/* touch screen always uses channel 0 */
-#define ADC_S3C2410_MUX_TS	0
-
 /* ADCTSC Register Bits */
 #define ADC_S3C2443_TSC_UD_SEN		(1u << 8)
 #define ADC_S3C2410_TSC_YM_SEN		(1u << 7)
 #define ADC_S3C2410_TSC_YP_SEN		(1u << 6)
 #define ADC_S3C2410_TSC_XM_SEN		(1u << 5)
 #define ADC_S3C2410_TSC_XP_SEN		(1u << 4)
-#define ADC_S3C2410_TSC_PULL_UP_DISABLE	(1u << 3)
-#define ADC_S3C2410_TSC_AUTO_PST	(1u << 2)
 #define ADC_S3C2410_TSC_XY_PST(x)	(((x) & 0x3) << 0)
 
 #define ADC_TSC_WAIT4INT (ADC_S3C2410_TSC_YM_SEN | \
@@ -79,12 +70,6 @@
 			 ADC_S3C2410_TSC_XP_SEN | \
 			 ADC_S3C2410_TSC_XY_PST(3))
 
-#define ADC_TSC_AUTOPST	(ADC_S3C2410_TSC_YM_SEN | \
-			 ADC_S3C2410_TSC_YP_SEN | \
-			 ADC_S3C2410_TSC_XP_SEN | \
-			 ADC_S3C2410_TSC_AUTO_PST | \
-			 ADC_S3C2410_TSC_XY_PST(0))
-
 /* Bit definitions for ADC_V2 */
 #define ADC_V2_CON1_SOFT_RESET	(1u << 2)
 
@@ -116,13 +101,11 @@
 struct exynos_adc {
 	struct exynos_adc_data	*data;
 	struct device		*dev;
-	struct input_dev	*input;
 	void __iomem		*regs;
 	struct regmap		*pmu_map;
 	struct clk		*clk;
 	struct clk		*sclk;
 	unsigned int		irq;
-	unsigned int		tsirq;
 	unsigned int		delay;
 	struct regulator	*vdd;
 
@@ -131,12 +114,6 @@ struct exynos_adc {
 	u32			value;
 	unsigned int            version;
 
-	bool			ts_enabled;
-
-	bool			read_ts;
-	u32			ts_x;
-	u32			ts_y;
-
 	/*
 	 * Lock to protect from potential concurrent access to the
 	 * completion callback during a manual conversion. For this driver
@@ -507,55 +484,13 @@ static int exynos_read_raw(struct iio_dev *indio_dev,
 	return ret;
 }
 
-static int exynos_read_s3c64xx_ts(struct iio_dev *indio_dev, int *x, int *y)
-{
-	struct exynos_adc *info = iio_priv(indio_dev);
-	unsigned long time_left;
-	int ret;
-
-	mutex_lock(&info->lock);
-	info->read_ts = true;
-
-	reinit_completion(&info->completion);
-
-	writel(ADC_S3C2410_TSC_PULL_UP_DISABLE | ADC_TSC_AUTOPST,
-	       ADC_V1_TSC(info->regs));
-
-	/* Select the ts channel to be used and Trigger conversion */
-	info->data->start_conv(info, ADC_S3C2410_MUX_TS);
-
-	time_left = wait_for_completion_timeout(&info->completion,
-						EXYNOS_ADC_TIMEOUT);
-	if (time_left == 0) {
-		dev_warn(&indio_dev->dev, "Conversion timed out! Resetting\n");
-		if (info->data->init_hw)
-			info->data->init_hw(info);
-		ret = -ETIMEDOUT;
-	} else {
-		*x = info->ts_x;
-		*y = info->ts_y;
-		ret = 0;
-	}
-
-	info->read_ts = false;
-	mutex_unlock(&info->lock);
-
-	return ret;
-}
-
 static irqreturn_t exynos_adc_isr(int irq, void *dev_id)
 {
 	struct exynos_adc *info = dev_id;
 	u32 mask = info->data->mask;
 
 	/* Read value */
-	if (info->read_ts) {
-		info->ts_x = readl(ADC_V1_DATX(info->regs));
-		info->ts_y = readl(ADC_V1_DATY(info->regs));
-		writel(ADC_TSC_WAIT4INT | ADC_S3C2443_TSC_UD_SEN, ADC_V1_TSC(info->regs));
-	} else {
-		info->value = readl(ADC_V1_DATX(info->regs)) & mask;
-	}
+	info->value = readl(ADC_V1_DATX(info->regs)) & mask;
 
 	/* clear irq */
 	if (info->data->clear_irq)
@@ -566,46 +501,6 @@ static irqreturn_t exynos_adc_isr(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-/*
- * Here we (ab)use a threaded interrupt handler to stay running
- * for as long as the touchscreen remains pressed, we report
- * a new event with the latest data and then sleep until the
- * next timer tick. This mirrors the behavior of the old
- * driver, with much less code.
- */
-static irqreturn_t exynos_ts_isr(int irq, void *dev_id)
-{
-	struct exynos_adc *info = dev_id;
-	struct iio_dev *dev = dev_get_drvdata(info->dev);
-	u32 x, y;
-	bool pressed;
-	int ret;
-
-	while (READ_ONCE(info->ts_enabled)) {
-		ret = exynos_read_s3c64xx_ts(dev, &x, &y);
-		if (ret == -ETIMEDOUT)
-			break;
-
-		pressed = x & y & ADC_DATX_PRESSED;
-		if (!pressed) {
-			input_report_key(info->input, BTN_TOUCH, 0);
-			input_sync(info->input);
-			break;
-		}
-
-		input_report_abs(info->input, ABS_X, x & ADC_DATX_MASK);
-		input_report_abs(info->input, ABS_Y, y & ADC_DATY_MASK);
-		input_report_key(info->input, BTN_TOUCH, 1);
-		input_sync(info->input);
-
-		usleep_range(1000, 1100);
-	}
-
-	writel(0, ADC_V1_CLRINTPNDNUP(info->regs));
-
-	return IRQ_HANDLED;
-}
-
 static int exynos_adc_reg_access(struct iio_dev *indio_dev,
 			      unsigned reg, unsigned writeval,
 			      unsigned *readval)
@@ -657,70 +552,12 @@ static int exynos_adc_remove_devices(struct device *dev, void *c)
 	return 0;
 }
 
-static int exynos_adc_ts_open(struct input_dev *dev)
-{
-	struct exynos_adc *info = input_get_drvdata(dev);
-
-	WRITE_ONCE(info->ts_enabled, true);
-	enable_irq(info->tsirq);
-
-	return 0;
-}
-
-static void exynos_adc_ts_close(struct input_dev *dev)
-{
-	struct exynos_adc *info = input_get_drvdata(dev);
-
-	WRITE_ONCE(info->ts_enabled, false);
-	disable_irq(info->tsirq);
-}
-
-static int exynos_adc_ts_init(struct exynos_adc *info)
-{
-	int ret;
-
-	if (info->tsirq <= 0)
-		return -ENODEV;
-
-	info->input = input_allocate_device();
-	if (!info->input)
-		return -ENOMEM;
-
-	info->input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
-	info->input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
-
-	input_set_abs_params(info->input, ABS_X, 0, 0x3FF, 0, 0);
-	input_set_abs_params(info->input, ABS_Y, 0, 0x3FF, 0, 0);
-
-	info->input->name = "S3C24xx TouchScreen";
-	info->input->id.bustype = BUS_HOST;
-	info->input->open = exynos_adc_ts_open;
-	info->input->close = exynos_adc_ts_close;
-
-	input_set_drvdata(info->input, info);
-
-	ret = input_register_device(info->input);
-	if (ret) {
-		input_free_device(info->input);
-		return ret;
-	}
-
-	ret = request_threaded_irq(info->tsirq, NULL, exynos_ts_isr,
-				   IRQF_ONESHOT | IRQF_NO_AUTOEN,
-				   "touchscreen", info);
-	if (ret)
-		input_unregister_device(info->input);
-
-	return ret;
-}
-
 static int exynos_adc_probe(struct platform_device *pdev)
 {
 	struct exynos_adc *info = NULL;
 	struct device_node *np = pdev->dev.of_node;
 	struct s3c2410_ts_mach_info *pdata = dev_get_platdata(&pdev->dev);
 	struct iio_dev *indio_dev = NULL;
-	bool has_ts = false;
 	int ret;
 	int irq;
 
@@ -753,27 +590,10 @@ static int exynos_adc_probe(struct platform_device *pdev)
 		}
 	}
 
-	/* leave out any TS related code if unreachable */
-	if (IS_REACHABLE(CONFIG_INPUT)) {
-		has_ts = of_property_read_bool(pdev->dev.of_node,
-					       "has-touchscreen") || pdata;
-	}
-
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0)
 		return irq;
 	info->irq = irq;
-
-	if (has_ts) {
-		irq = platform_get_irq(pdev, 1);
-		if (irq == -EPROBE_DEFER)
-			return irq;
-
-		info->tsirq = irq;
-	} else {
-		info->tsirq = -1;
-	}
-
 	info->dev = &pdev->dev;
 
 	init_completion(&info->completion);
@@ -842,11 +662,6 @@ static int exynos_adc_probe(struct platform_device *pdev)
 	else
 		info->delay = 10000;
 
-	if (has_ts)
-		ret = exynos_adc_ts_init(info);
-	if (ret)
-		goto err_iio;
-
 	ret = of_platform_populate(np, exynos_adc_match, NULL, &indio_dev->dev);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed adding child nodes\n");
@@ -858,11 +673,6 @@ static int exynos_adc_probe(struct platform_device *pdev)
 err_of_populate:
 	device_for_each_child(&indio_dev->dev, NULL,
 				exynos_adc_remove_devices);
-	if (has_ts) {
-		input_unregister_device(info->input);
-		free_irq(info->tsirq, info);
-	}
-err_iio:
 	iio_device_unregister(indio_dev);
 err_irq:
 	free_irq(info->irq, info);
@@ -882,10 +692,6 @@ static void exynos_adc_remove(struct platform_device *pdev)
 	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
 	struct exynos_adc *info = iio_priv(indio_dev);
 
-	if (IS_REACHABLE(CONFIG_INPUT) && info->input) {
-		free_irq(info->tsirq, info);
-		input_unregister_device(info->input);
-	}
 	device_for_each_child(&indio_dev->dev, NULL,
 				exynos_adc_remove_devices);
 	iio_device_unregister(indio_dev);

-- 
2.48.1

Re: [PATCH 2/5] iio: adc: exynos_adc: Drop touchscreen support

[Krzysztof Kozlowski]

On 30/08/2025 13:09, Krzysztof Kozlowski wrote:
> With last user of touchscreen via ADC (S3C24xx SoC) gone, drop the
> remaining code from Samsung SoC ADC driver.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  drivers/iio/adc/exynos_adc.c | 196 +------------------------------------------
>  1 file changed, 1 insertion(+), 195 deletions(-)
> 
I need to drop also touchscreen-s3c2410.h header.

Best regards,
Krzysztof

[PATCH 3/5] iio: adc: exynos_adc: Drop platform data support

[Krzysztof Kozlowski]

There are no Samsung Exynos SoC ADC driver users which bind via platform
ID, thus platform data is never set and can be dropped.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 drivers/iio/adc/exynos_adc.c | 9 +--------
 1 file changed, 1 insertion(+), 8 deletions(-)

diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c
index 30f6d8436e775a8d2177951b436cd45152307ea2..dd1494ee365a7b34d6b485ee4c9e753f50b5ff26 100644
--- a/drivers/iio/adc/exynos_adc.c
+++ b/drivers/iio/adc/exynos_adc.c
@@ -106,7 +106,6 @@ struct exynos_adc {
 	struct clk		*clk;
 	struct clk		*sclk;
 	unsigned int		irq;
-	unsigned int		delay;
 	struct regulator	*vdd;
 
 	struct completion	completion;
@@ -213,7 +212,7 @@ static void exynos_adc_v1_init_hw(struct exynos_adc *info)
 	writel(con1, ADC_V1_CON(info->regs));
 
 	/* set touchscreen delay */
-	writel(info->delay, ADC_V1_DLY(info->regs));
+	writel(10000, ADC_V1_DLY(info->regs));
 }
 
 static void exynos_adc_v1_exit_hw(struct exynos_adc *info)
@@ -556,7 +555,6 @@ static int exynos_adc_probe(struct platform_device *pdev)
 {
 	struct exynos_adc *info = NULL;
 	struct device_node *np = pdev->dev.of_node;
-	struct s3c2410_ts_mach_info *pdata = dev_get_platdata(&pdev->dev);
 	struct iio_dev *indio_dev = NULL;
 	int ret;
 	int irq;
@@ -657,11 +655,6 @@ static int exynos_adc_probe(struct platform_device *pdev)
 	if (info->data->init_hw)
 		info->data->init_hw(info);
 
-	if (pdata)
-		info->delay = pdata->delay;
-	else
-		info->delay = 10000;
-
 	ret = of_platform_populate(np, exynos_adc_match, NULL, &indio_dev->dev);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed adding child nodes\n");

-- 
2.48.1

[PATCH 4/5] dt-bindings: iio: adc: samsung,exynos: Drop S3C2410

[Krzysztof Kozlowski]

Samsung S3C24xx family of SoCs was removed the Linux kernel in the
commit 61b7f8920b17 ("ARM: s3c: remove all s3c24xx support"), in January
2023.  There are no in-kernel users of remaining S3C24xx compatibles.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
index 8069e99ddac860b22c793c3ef9479f720cfd8c65..73d7ba0fda1def433a97d10bce21e762a307e36c 100644
--- a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
@@ -18,10 +18,6 @@ properties:
           - samsung,exynos3250-adc
           - samsung,exynos4212-adc                # Exynos4212 and Exynos4412
           - samsung,exynos7-adc
-          - samsung,s3c2410-adc
-          - samsung,s3c2416-adc
-          - samsung,s3c2440-adc
-          - samsung,s3c2443-adc
           - samsung,s3c6410-adc
           - samsung,s5pv210-adc
       - items:

-- 
2.48.1

[PATCH 5/5] dt-bindings: iio: adc: samsung,exynos: Drop touchscreen support

[Krzysztof Kozlowski]

With last user of touchscreen via ADC (S3C24xx SoC) gone, drop the
unused has-touchscreen property and optional touchscreen interrupt.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../bindings/iio/adc/samsung,exynos-adc.yaml          | 19 +------------------
 1 file changed, 1 insertion(+), 18 deletions(-)

diff --git a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
index 73d7ba0fda1def433a97d10bce21e762a307e36c..0654f8972525bf67089fe7fd4f3ab3ff506515c3 100644
--- a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
@@ -42,10 +42,7 @@ properties:
     maxItems: 2
 
   interrupts:
-    description:
-      ADC interrupt followed by optional touchscreen interrupt.
-    minItems: 1
-    maxItems: 2
+    maxItems: 1
 
   "#io-channel-cells":
     const: 1
@@ -58,11 +55,6 @@ properties:
       Phandle to the PMU system controller node (to access the ADC_PHY
       register on Exynos3250/4x12/5250/5420/5800).
 
-  has-touchscreen:
-    description:
-      If present, indicates that a touchscreen is connected and usable.
-    type: boolean
-
 required:
   - compatible
   - reg
@@ -113,15 +105,6 @@ allOf:
           items:
             - const: adc
 
-  - if:
-      required:
-        - has-touchscreen
-    then:
-      properties:
-        interrupts:
-          minItems: 2
-          maxItems: 2
-
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>

-- 
2.48.1

Re: [PATCH 0/5] iio: adc: samsung: Simplify, cleanup and drop S3C2410

[Andy Shevchenko]

On Sat, Aug 30, 2025 at 2:09 PM Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
>
> S3C2410 is gone from kernel, so we can drop its support and remaining
> related pieces.

>       iio: adc: exynos_adc: Drop S3C2410 support
>       iio: adc: exynos_adc: Drop touchscreen support
>       iio: adc: exynos_adc: Drop platform data support

Reviewed-by: Andy Shevchenko <andy@kernel.org>
for patches 1-3.

-- 
With Best Regards,
Andy Shevchenko