linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Chen-Yu Tsai <wens@kernel.org>
To: Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Stephen Boyd <sboyd@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
	Jernej Skrabec <jernej@kernel.org>,
	Samuel Holland <samuel@sholland.org>
Cc: Andre Przywara <andre.przywara@arm.com>,
	linux-sunxi@lists.linux.dev, linux-clk@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 7/8] arm64: dts: allwinner: a523: Add MCU PRCM CCU node
Date: Sun, 31 Aug 2025 01:09:00 +0800	[thread overview]
Message-ID: <20250830170901.1996227-8-wens@kernel.org> (raw)
In-Reply-To: <20250830170901.1996227-1-wens@kernel.org>

From: Chen-Yu Tsai <wens@csie.org>

Add a device node for the third supported clock controller found in the
A523 / T527 SoCs. This controller has clocks and resets for the RISC-V
MCU, and others peripherals possibly meant to operate in low power mode
driven by the MCU, such as audio interfaces, an audio DSP, and the NPU.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 .../arm64/boot/dts/allwinner/sun55i-a523.dtsi | 25 +++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
index 79bd9ce08c7c..b6e82d53af54 100644
--- a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
@@ -4,8 +4,10 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/sun6i-rtc.h>
 #include <dt-bindings/clock/sun55i-a523-ccu.h>
+#include <dt-bindings/clock/sun55i-a523-mcu-ccu.h>
 #include <dt-bindings/clock/sun55i-a523-r-ccu.h>
 #include <dt-bindings/reset/sun55i-a523-ccu.h>
+#include <dt-bindings/reset/sun55i-a523-mcu-ccu.h>
 #include <dt-bindings/reset/sun55i-a523-r-ccu.h>
 #include <dt-bindings/power/allwinner,sun55i-a523-ppu.h>
 #include <dt-bindings/power/allwinner,sun55i-a523-pck-600.h>
@@ -825,6 +827,29 @@ rtc: rtc@7090000 {
 			clock-names = "bus", "hosc", "ahb";
 			#clock-cells = <1>;
 		};
+
+		mcu_ccu: clock-controller@7102000 {
+			compatible = "allwinner,sun55i-a523-mcu-ccu";
+			reg = <0x7102000 0x164>;
+			clocks = <&osc24M>,
+				 <&rtc CLK_OSC32K>,
+				 <&rtc CLK_IOSC>,
+				 <&ccu CLK_PLL_AUDIO0_4X>,
+				 <&ccu CLK_PLL_PERIPH0_300M>,
+				 <&ccu CLK_DSP>,
+				 <&r_ccu CLK_R_AHB>,
+				 <&ccu CLK_MBUS>;
+			clock-names = "hosc",
+				      "losc",
+				      "iosc",
+				      "pll-audio0-4x",
+				      "pll-periph0-300m",
+				      "dsp",
+				      "r-ahb",
+				      "mbus";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
 	};
 
 	thermal-zones {
-- 
2.39.5


  parent reply	other threads:[~2025-08-30 17:09 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-08-30 17:08 [PATCH 0/8] arm64: allwinner: a523: Enable MCU PRCM and NPU Chen-Yu Tsai
2025-08-30 17:08 ` [PATCH 1/8] dt-bindings: clock: sun55i-a523-ccu: Add missing NPU module clock Chen-Yu Tsai
2025-09-01 21:29   ` Rob Herring (Arm)
2025-08-30 17:08 ` [PATCH 2/8] dt-bindings: clock: sun55i-a523-ccu: Add A523 MCU CCU clock controller Chen-Yu Tsai
2025-09-01 21:31   ` Rob Herring (Arm)
2025-08-30 17:08 ` [PATCH 3/8] clk: sunxi-ng: mp: Fix dual-divider clock rate readback Chen-Yu Tsai
2025-08-30 17:08 ` [PATCH 4/8] clk: sunxi-ng: sun55i-a523-ccu: Add missing NPU module clock Chen-Yu Tsai
2025-08-30 17:08 ` [PATCH 5/8] clk: sunxi-ng: div: support power-of-two dividers Chen-Yu Tsai
2025-08-30 17:08 ` [PATCH 6/8] clk: sunxi-ng: add support for the A523/T527 MCU CCU Chen-Yu Tsai
2025-08-30 17:09 ` Chen-Yu Tsai [this message]
2025-08-30 17:09 ` [PATCH 8/8] arm64: dts: allwinner: a523: Add NPU device node Chen-Yu Tsai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250830170901.1996227-8-wens@kernel.org \
    --to=wens@kernel.org \
    --cc=andre.przywara@arm.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jernej@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=robh@kernel.org \
    --cc=samuel@sholland.org \
    --cc=sboyd@kernel.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).