From: Peng Fan <peng.fan@nxp.com>
To: Ulf Hansson <ulf.hansson@linaro.org>,
"Rafael J. Wysocki" <rafael@kernel.org>,
Len Brown <lenb@kernel.org>, Pavel Machek <pavel@kernel.org>,
Peter Chen <peter.chen@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
Thinh Nguyen <Thinh.Nguyen@synopsys.com>,
Vincent Guittot <vincent.guittot@linaro.org>,
Xu Yang <xu.yang_2@nxp.com>
Cc: linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-usb@vger.kernel.org, imx@lists.linux.dev,
arm-scmi@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
Peng Fan <peng.fan@nxp.com>
Subject: [PATCH v3 3/4] usb: chipidea: ci_hdrc_imx: Set out of band wakeup for i.MX95
Date: Tue, 02 Sep 2025 11:33:02 +0800 [thread overview]
Message-ID: <20250902-pm-v3-3-ffadbb454cdc@nxp.com> (raw)
In-Reply-To: <20250902-pm-v3-0-ffadbb454cdc@nxp.com>
i.MX95 USB2 inside HSIOMIX could still wakeup Linux, even if HSIOMIX
power domain(Digital logic) is off. There is still always on logic
have the wakeup capability which is out band wakeup capbility.
So use device_set_out_band_wakeup for i.MX95 to make sure usb2 could
wakeup system even if HSIOMIX power domain is in off state.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
drivers/usb/chipidea/ci_hdrc_imx.c | 8 ++++++++
include/linux/usb/chipidea.h | 1 +
2 files changed, 9 insertions(+)
diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
index d7c2a1a3c2715967203b98c819fa864e06a00a32..a2b3f673dfc1183a02783bf6ef92f8570c6042cf 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.c
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@@ -79,6 +79,10 @@ static const struct ci_hdrc_imx_platform_flag imx8ulp_usb_data = {
CI_HDRC_HAS_PORTSC_PEC_MISSED,
};
+static const struct ci_hdrc_imx_platform_flag imx95_usb_data = {
+ .flags = CI_HDRC_SUPPORTS_RUNTIME_PM | CI_HDRC_OUT_BAND_WAKEUP,
+};
+
static const struct ci_hdrc_imx_platform_flag s32g_usb_data = {
.flags = CI_HDRC_DISABLE_HOST_STREAMING,
};
@@ -94,6 +98,7 @@ static const struct of_device_id ci_hdrc_imx_dt_ids[] = {
{ .compatible = "fsl,imx7d-usb", .data = &imx7d_usb_data},
{ .compatible = "fsl,imx7ulp-usb", .data = &imx7ulp_usb_data},
{ .compatible = "fsl,imx8ulp-usb", .data = &imx8ulp_usb_data},
+ { .compatible = "fsl,imx95-usb", .data = &imx95_usb_data},
{ .compatible = "nxp,s32g2-usb", .data = &s32g_usb_data},
{ /* sentinel */ }
};
@@ -570,6 +575,9 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
device_set_wakeup_capable(dev, true);
+ if (pdata.flags & CI_HDRC_OUT_BAND_WAKEUP)
+ device_set_out_band_wakeup(dev, true);
+
return 0;
disable_device:
diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
index e17ebeee24e3ecc4b1c2d153d9ea9b656b5a3d35..c6451191d2de68607a9380482701d11f949d0ff7 100644
--- a/include/linux/usb/chipidea.h
+++ b/include/linux/usb/chipidea.h
@@ -66,6 +66,7 @@ struct ci_hdrc_platform_data {
#define CI_HDRC_HAS_PORTSC_PEC_MISSED BIT(17)
#define CI_HDRC_FORCE_VBUS_ACTIVE_ALWAYS BIT(18)
#define CI_HDRC_HAS_SHORT_PKT_LIMIT BIT(19)
+#define CI_HDRC_OUT_BAND_WAKEUP BIT(20)
enum usb_dr_mode dr_mode;
#define CI_HDRC_CONTROLLER_RESET_EVENT 0
#define CI_HDRC_CONTROLLER_STOPPED_EVENT 1
--
2.37.1
next prev parent reply other threads:[~2025-09-02 3:33 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-02 3:32 [PATCH v3 0/4] pmdomain: core: Introduce device_set/get_out_band_wakeup and use it in usb Peng Fan
2025-09-02 3:33 ` [PATCH v3 1/4] pmdomain: core: Introduce device_set/get_out_band_wakeup() Peng Fan
2025-09-02 8:53 ` Xu Yang
2025-09-02 3:33 ` [PATCH v3 2/4] usb: chipidea: core: detach power domain for ci_hdrc platform device Peng Fan
2025-09-02 8:54 ` Xu Yang
2025-09-02 3:33 ` Peng Fan [this message]
2025-09-02 8:55 ` [PATCH v3 3/4] usb: chipidea: ci_hdrc_imx: Set out of band wakeup for i.MX95 Xu Yang
2025-09-02 3:33 ` [PATCH v3 4/4] usb: dwc3: imx8mp: " Peng Fan
2025-09-02 8:56 ` Xu Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250902-pm-v3-3-ffadbb454cdc@nxp.com \
--to=peng.fan@nxp.com \
--cc=Thinh.Nguyen@synopsys.com \
--cc=arm-scmi@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=lenb@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=pavel@kernel.org \
--cc=peter.chen@kernel.org \
--cc=rafael@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=ulf.hansson@linaro.org \
--cc=vincent.guittot@linaro.org \
--cc=xu.yang_2@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).