[PATCH] pinctrl: eswin: Fix regulator error check and Kconfig dependency

[PATCH] pinctrl: eswin: Fix regulator error check and Kconfig dependency

[Yulin Lu]

Smatch reported the following warning in eic7700_pinctrl_probe():

  drivers/pinctrl/pinctrl-eic7700.c:638 eic7700_pinctrl_probe()
  warn: passing zero to 'PTR_ERR'

The root cause is that devm_regulator_get() may return NULL when
CONFIG_REGULATOR is disabled. In such case, IS_ERR_OR_NULL() triggers
PTR_ERR(NULL) which evaluates to 0, leading to passing a success code
as an error.

However, this driver cannot work without a regulator. To fix this:

 - Change the check from IS_ERR_OR_NULL() to IS_ERR()
 - Update Kconfig to explicitly select REGULATOR and
   REGULATOR_FIXED_VOLTAGE, ensuring that the regulator framework is
   always available.

This resolves the Smatch warning and enforces the correct dependency.

Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: 5b797bcc00ef ("pinctrl: eswin: Add EIC7700 pinctrl driver")
Signed-off-by: Yulin Lu <luyulin@eswincomputing.com>
---
 drivers/pinctrl/Kconfig           | 2 ++
 drivers/pinctrl/pinctrl-eic7700.c | 2 +-
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index be1ca8e85754..0402626c4b98 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -211,6 +211,8 @@ config PINCTRL_EIC7700
 	depends on ARCH_ESWIN || COMPILE_TEST
 	select PINMUX
 	select GENERIC_PINCONF
+	select REGULATOR
+	select REGULATOR_FIXED_VOLTAGE
 	help
 	  This driver support for the pin controller in ESWIN's EIC7700 SoC,
 	  which supports pin multiplexing, pin configuration,and rgmii voltage
diff --git a/drivers/pinctrl/pinctrl-eic7700.c b/drivers/pinctrl/pinctrl-eic7700.c
index 4874b5532343..ffcd0ec5c2dc 100644
--- a/drivers/pinctrl/pinctrl-eic7700.c
+++ b/drivers/pinctrl/pinctrl-eic7700.c
@@ -634,7 +634,7 @@ static int eic7700_pinctrl_probe(struct platform_device *pdev)
 		return PTR_ERR(pc->base);
 
 	regulator = devm_regulator_get(dev, "vrgmii");
-	if (IS_ERR_OR_NULL(regulator)) {
+	if (IS_ERR(regulator)) {
 		return dev_err_probe(dev, PTR_ERR(regulator),
 					 "failed to get vrgmii regulator\n");
 	}
-- 
2.25.1

Re: [PATCH] pinctrl: eswin: Fix regulator error check and Kconfig dependency

[Krzysztof Kozlowski]

On 02/09/2025 11:45, Yulin Lu wrote:
> Smatch reported the following warning in eic7700_pinctrl_probe():
> 
>   drivers/pinctrl/pinctrl-eic7700.c:638 eic7700_pinctrl_probe()
>   warn: passing zero to 'PTR_ERR'
> 
> The root cause is that devm_regulator_get() may return NULL when
> CONFIG_REGULATOR is disabled. In such case, IS_ERR_OR_NULL() triggers
> PTR_ERR(NULL) which evaluates to 0, leading to passing a success code
> as an error.
> 
> However, this driver cannot work without a regulator. To fix this:
> 
>  - Change the check from IS_ERR_OR_NULL() to IS_ERR()
>  - Update Kconfig to explicitly select REGULATOR and
>    REGULATOR_FIXED_VOLTAGE, ensuring that the regulator framework is
>    always available.
> 
> This resolves the Smatch warning and enforces the correct dependency.
> 
> Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>

Wrong tag. Didn't Dan give you proper way to attribute reported? See
submitting-patches. You need Reported-by with Closes.


Best regards,
Krzysztof