linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Vincent Mailhol <mailhol@kernel.org>
To: Marc Kleine-Budde <mkl@pengutronix.de>,
	 Oliver Hartkopp <socketcan@hartkopp.net>
Cc: "Vincent Mailhol" <mailhol@kernel.org>,
	"Stéphane Grosjean" <stephane.grosjean@hms-networks.com>,
	"Robert Nawrath" <mbro1689@gmail.com>,
	"Minh Le" <minh.le.aj@renesas.com>,
	"Duy Nguyen" <duy.nguyen.rh@renesas.com>,
	linux-can@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 02/21] can: dev: make can_get_relative_tdco() FD agnostic and move it to bittiming.h
Date: Wed, 03 Sep 2025 17:50:01 +0900	[thread overview]
Message-ID: <20250903-canxl-netlink-prep-v1-2-904bd6037cd9@kernel.org> (raw)
In-Reply-To: <20250903-canxl-netlink-prep-v1-0-904bd6037cd9@kernel.org>

can_get_relative_tdco() needs to access can_priv->fd making it
specific to CAN FD. Change the function parameter from struct can_priv
to struct data_bittiming_params. This way, the function becomes CAN FD
agnostic and can be reused later on for the CAN XL TDC.

Now that we dropped the dependency on struct can_priv, also move
can_get_relative_tdco() back to bittiming.h where it was meant to
belong to.

Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
---
Changelog:

  RFC -> v1:

   - Just pass the IFLA index instead of passing each argument
     individually. Instead, derive these as local variables depending
     on whethe the IFLA index is IFLA_CAN_TDC or IFLA_CAN_XL_TDC.
---
 include/linux/can/bittiming.h | 29 +++++++++++++++++++++++++++++
 include/linux/can/dev.h       | 29 -----------------------------
 2 files changed, 29 insertions(+), 29 deletions(-)

diff --git a/include/linux/can/bittiming.h b/include/linux/can/bittiming.h
index 6572ec1712ca2df8db7fe1453ae5a4d5699712b1..4d5f7794194ab13641c7854c2d66625c4e942f6c 100644
--- a/include/linux/can/bittiming.h
+++ b/include/linux/can/bittiming.h
@@ -160,6 +160,35 @@ int can_get_bittiming(const struct net_device *dev, struct can_bittiming *bt,
 		      const unsigned int bitrate_const_cnt,
 		      struct netlink_ext_ack *extack);
 
+/*
+ * can_get_relative_tdco() - TDCO relative to the sample point
+ *
+ * struct can_tdc::tdco represents the absolute offset from TDCV. Some
+ * controllers use instead an offset relative to the Sample Point (SP)
+ * such that:
+ *
+ * SSP = TDCV + absolute TDCO
+ *     = TDCV + SP + relative TDCO
+ *
+ * -+----------- one bit ----------+-- TX pin
+ *  |<--- Sample Point --->|
+ *
+ *                         --+----------- one bit ----------+-- RX pin
+ *  |<-------- TDCV -------->|
+ *                           |<------------------------>| absolute TDCO
+ *                           |<--- Sample Point --->|
+ *                           |                      |<->| relative TDCO
+ *  |<------------- Secondary Sample Point ------------>|
+ */
+static inline s32 can_get_relative_tdco(const struct data_bittiming_params *dbt_params)
+{
+	const struct can_bittiming *dbt = &dbt_params->data_bittiming;
+	s32 sample_point_in_tc = (CAN_SYNC_SEG + dbt->prop_seg +
+				  dbt->phase_seg1) * dbt->brp;
+
+	return (s32)dbt_params->tdc.tdco - sample_point_in_tc;
+}
+
 /*
  * can_bit_time() - Duration of one bit
  *
diff --git a/include/linux/can/dev.h b/include/linux/can/dev.h
index 76022f48a97673d81676c39c697eadc6d7063ff7..55aaadaacf68f940fa1b71f7c438e68b84080292 100644
--- a/include/linux/can/dev.h
+++ b/include/linux/can/dev.h
@@ -85,35 +85,6 @@ static inline bool can_fd_tdc_is_enabled(const struct can_priv *priv)
 	return !!(priv->ctrlmode & CAN_CTRLMODE_FD_TDC_MASK);
 }
 
-/*
- * can_get_relative_tdco() - TDCO relative to the sample point
- *
- * struct can_tdc::tdco represents the absolute offset from TDCV. Some
- * controllers use instead an offset relative to the Sample Point (SP)
- * such that:
- *
- * SSP = TDCV + absolute TDCO
- *     = TDCV + SP + relative TDCO
- *
- * -+----------- one bit ----------+-- TX pin
- *  |<--- Sample Point --->|
- *
- *                         --+----------- one bit ----------+-- RX pin
- *  |<-------- TDCV -------->|
- *                           |<------------------------>| absolute TDCO
- *                           |<--- Sample Point --->|
- *                           |                      |<->| relative TDCO
- *  |<------------- Secondary Sample Point ------------>|
- */
-static inline s32 can_get_relative_tdco(const struct can_priv *priv)
-{
-	const struct can_bittiming *dbt = &priv->fd.data_bittiming;
-	s32 sample_point_in_tc = (CAN_SYNC_SEG + dbt->prop_seg +
-				  dbt->phase_seg1) * dbt->brp;
-
-	return (s32)priv->fd.tdc.tdco - sample_point_in_tc;
-}
-
 /* helper to define static CAN controller features at device creation time */
 static inline int __must_check can_set_static_ctrlmode(struct net_device *dev,
 						       u32 static_mode)

-- 
2.49.1


  parent reply	other threads:[~2025-09-03  8:52 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-09-03  8:49 [PATCH 00/21] can: netlink: preparation before introduction of CAN XL step 2/2 Vincent Mailhol
2025-09-03  8:50 ` [PATCH 01/21] can: dev: move struct data_bittiming_params to linux/can/bittiming.h Vincent Mailhol
2025-09-03  8:50 ` Vincent Mailhol [this message]
2025-09-03  8:50 ` [PATCH 03/21] can: netlink: document which symbols are FD specific Vincent Mailhol
2025-09-03  8:50 ` [PATCH 04/21] can: netlink: refactor can_validate_bittiming() Vincent Mailhol
2025-09-03  8:50 ` [PATCH 05/21] can: netlink: add can_validate_tdc() Vincent Mailhol
2025-09-03  8:50 ` [PATCH 06/21] can: netlink: add can_validate_databittiming() Vincent Mailhol
2025-09-04 18:46   ` kernel test robot
2025-09-05 14:55     ` Vincent Mailhol
2025-09-03  8:50 ` [PATCH 07/21] can: netlink: remove comment in can_validate() Vincent Mailhol
2025-09-04  6:51   ` Oliver Hartkopp
2025-09-04  9:48     ` Vincent Mailhol
2025-09-05 10:55       ` Oliver Hartkopp
2025-09-05 15:12         ` Vincent Mailhol
2025-09-03  8:50 ` [PATCH 08/21] can: netlink: refactor CAN_CTRLMODE_TDC_{AUTO,MANUAL} flag reset logic Vincent Mailhol
2025-09-03  8:50 ` [PATCH 09/21] can: netlink: remove useless check in can_tdc_changelink() Vincent Mailhol
2025-09-03  8:50 ` [PATCH 10/21] can: netlink: make can_tdc_changelink() FD agnostic Vincent Mailhol
2025-09-03  8:50 ` [PATCH 11/21] can: netlink: add can_dtb_changelink() Vincent Mailhol
2025-09-04 20:29   ` kernel test robot
2025-09-03  8:50 ` [PATCH 12/21] can: netlink: add can_ctrlmode_changelink() Vincent Mailhol
2025-09-03  8:50 ` [PATCH 13/21] can: netlink: make can_tdc_get_size() FD agnostic Vincent Mailhol
2025-09-03  8:50 ` [PATCH 14/21] can: netlink: add can_data_bittiming_get_size() Vincent Mailhol
2025-09-03  8:50 ` [PATCH 15/21] can: netlink: add can_bittiming_fill_info() Vincent Mailhol
2025-09-03  8:50 ` [PATCH 16/21] can: netlink: add can_bittiming_const_fill_info() Vincent Mailhol
2025-09-03  8:50 ` [PATCH 17/21] can: netlink: add can_bitrate_const_fill_info() Vincent Mailhol
2025-09-03  8:50 ` [PATCH 18/21] can: netlink: make can_tdc_fill_info() FD agnostic Vincent Mailhol
2025-09-04 22:01   ` kernel test robot
2025-09-03  8:50 ` [PATCH 19/21] can: calc_bittiming: make can_calc_tdco() " Vincent Mailhol
2025-09-03  8:50 ` [PATCH 20/21] can: dev: add can_get_ctrlmode_str() Vincent Mailhol
2025-09-03  8:50 ` [PATCH 21/21] can: netlink: add userland error messages Vincent Mailhol
2025-09-03  9:26 ` [PATCH 00/21] can: netlink: preparation before introduction of CAN XL step 2/2 Vincent Mailhol
2025-09-04  6:36   ` Oliver Hartkopp
2025-09-04  9:18     ` Vincent Mailhol
2025-09-05 11:11       ` Oliver Hartkopp
2025-09-05 14:58         ` Vincent Mailhol

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250903-canxl-netlink-prep-v1-2-904bd6037cd9@kernel.org \
    --to=mailhol@kernel.org \
    --cc=duy.nguyen.rh@renesas.com \
    --cc=linux-can@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mbro1689@gmail.com \
    --cc=minh.le.aj@renesas.com \
    --cc=mkl@pengutronix.de \
    --cc=socketcan@hartkopp.net \
    --cc=stephane.grosjean@hms-networks.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).