From: Vincent Mailhol <mailhol@kernel.org>
To: Marc Kleine-Budde <mkl@pengutronix.de>,
Oliver Hartkopp <socketcan@hartkopp.net>
Cc: "Vincent Mailhol" <mailhol@kernel.org>,
"Stéphane Grosjean" <stephane.grosjean@hms-networks.com>,
"Robert Nawrath" <mbro1689@gmail.com>,
"Minh Le" <minh.le.aj@renesas.com>,
"Duy Nguyen" <duy.nguyen.rh@renesas.com>,
linux-can@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 21/21] can: netlink: add userland error messages
Date: Wed, 03 Sep 2025 17:50:20 +0900 [thread overview]
Message-ID: <20250903-canxl-netlink-prep-v1-21-904bd6037cd9@kernel.org> (raw)
In-Reply-To: <20250903-canxl-netlink-prep-v1-0-904bd6037cd9@kernel.org>
Use NL_SET_ERR_MSG() and NL_SET_ERR_MSG_FMT() to return meaningful
error messages to the userland whenever a -EOPNOTSUPP error is
returned due to a failed validation of the CAN netlink arguments.
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
---
drivers/net/can/dev/netlink.c | 82 ++++++++++++++++++++++++++++++++-----------
1 file changed, 62 insertions(+), 20 deletions(-)
diff --git a/drivers/net/can/dev/netlink.c b/drivers/net/can/dev/netlink.c
index d1c54c7dd333d229f03fc653d61a21a48f8c8865..f39f6310312aa404e025fb7ff11e483a3d9f9f20 100644
--- a/drivers/net/can/dev/netlink.c
+++ b/drivers/net/can/dev/netlink.c
@@ -63,15 +63,23 @@ static int can_validate_tdc(struct nlattr *data_tdc,
bool tdc_auto = tdc_flags & CAN_CTRLMODE_TDC_AUTO_MASK;
int err;
- /* CAN_CTRLMODE_TDC_{AUTO,MANUAL} are mutually exclusive */
- if (tdc_auto && tdc_manual)
+ if (tdc_auto && tdc_manual) {
+ NL_SET_ERR_MSG(extack,
+ "TDC manual and auto modes are mutually exclusive");
return -EOPNOTSUPP;
+ }
/* If one of the CAN_CTRLMODE_TDC_* flag is set then TDC
* must be set and vice-versa
*/
- if ((tdc_auto || tdc_manual) != !!data_tdc)
+ if ((tdc_auto || tdc_manual) && !data_tdc) {
+ NL_SET_ERR_MSG(extack, "TDC parameters are missing");
return -EOPNOTSUPP;
+ }
+ if (!(tdc_auto || tdc_manual) && data_tdc) {
+ NL_SET_ERR_MSG(extack, "TDC mode (auto or manual) is missing");
+ return -EOPNOTSUPP;
+ }
/* If providing TDC parameters, at least TDCO is needed. TDCV
* is needed if and only if CAN_CTRLMODE_TDC_MANUAL is set
@@ -85,15 +93,23 @@ static int can_validate_tdc(struct nlattr *data_tdc,
return err;
if (tb_tdc[IFLA_CAN_TDC_TDCV]) {
- if (tdc_auto)
+ if (tdc_auto) {
+ NL_SET_ERR_MSG(extack,
+ "TDCV is incompatible with TDC auto mode");
return -EOPNOTSUPP;
+ }
} else {
- if (tdc_manual)
+ if (tdc_manual) {
+ NL_SET_ERR_MSG(extack,
+ "TDC manual mode requires TDCV");
return -EOPNOTSUPP;
+ }
}
- if (!tb_tdc[IFLA_CAN_TDC_TDCO])
+ if (!tb_tdc[IFLA_CAN_TDC_TDCO]) {
+ NL_SET_ERR_MSG(extack, "TDCO is missing");
return -EOPNOTSUPP;
+ }
}
return 0;
@@ -104,6 +120,7 @@ static int can_validate_databittiming(struct nlattr *data[],
int ifla_can_data_bittiming, u32 flags)
{
struct nlattr *data_tdc;
+ const char *type;
u32 tdc_flags;
bool is_on;
int err;
@@ -112,18 +129,31 @@ static int can_validate_databittiming(struct nlattr *data[],
data_tdc = data[IFLA_CAN_TDC];
tdc_flags = flags & CAN_CTRLMODE_FD_TDC_MASK;
is_on = flags & CAN_CTRLMODE_FD;
+ type = "FD";
} else {
WARN_ON(1); /* Place holder for CAN XL */
}
if (is_on) {
- if (!data[IFLA_CAN_BITTIMING] || !data[ifla_can_data_bittiming])
+ if (!data[IFLA_CAN_BITTIMING] || !data[ifla_can_data_bittiming]) {
+ NL_SET_ERR_MSG_FMT(extack,
+ "Provide both nominal and %s data bittiming",
+ type);
return -EOPNOTSUPP;
- }
-
- if (data[ifla_can_data_bittiming] || data_tdc) {
- if (!is_on)
+ }
+ } else {
+ if (data[ifla_can_data_bittiming]) {
+ NL_SET_ERR_MSG_FMT(extack,
+ "%s data bittiming requires CAN %s",
+ type, type);
return -EOPNOTSUPP;
+ }
+ if (data_tdc) {
+ NL_SET_ERR_MSG_FMT(extack,
+ "%s TDC requires CAN %s",
+ type, type);
+ return -EOPNOTSUPP;
+ }
}
err = can_validate_bittiming(data, extack, ifla_can_data_bittiming);
@@ -170,8 +200,7 @@ static int can_ctrlmode_changelink(struct net_device *dev,
{
struct can_priv *priv = netdev_priv(dev);
struct can_ctrlmode *cm;
- u32 maskedflags;
- u32 ctrlstatic;
+ u32 ctrlstatic, maskedflags, notsupp, ctrlstatic_missing;
if (!data[IFLA_CAN_CTRLMODE])
return 0;
@@ -181,20 +210,28 @@ static int can_ctrlmode_changelink(struct net_device *dev,
return -EBUSY;
cm = nla_data(data[IFLA_CAN_CTRLMODE]);
- maskedflags = cm->flags & cm->mask;
ctrlstatic = can_get_static_ctrlmode(priv);
+ maskedflags = cm->flags & cm->mask;
+ notsupp = maskedflags & ~(priv->ctrlmode_supported | ctrlstatic);
+ ctrlstatic_missing = (maskedflags & ctrlstatic) ^ ctrlstatic;
- /* check whether provided bits are allowed to be passed */
- if (maskedflags & ~(priv->ctrlmode_supported | ctrlstatic))
+ if (notsupp) {
+ NL_SET_ERR_MSG_FMT(extack,
+ "requested control mode %s not supported",
+ can_get_ctrlmode_str(notsupp));
return -EOPNOTSUPP;
+ }
/* do not check for static fd-non-iso if 'fd' is disabled */
if (!(maskedflags & CAN_CTRLMODE_FD))
ctrlstatic &= ~CAN_CTRLMODE_FD_NON_ISO;
- /* make sure static options are provided by configuration */
- if ((maskedflags & ctrlstatic) != ctrlstatic)
+ if (ctrlstatic_missing) {
+ NL_SET_ERR_MSG_FMT(extack,
+ "missing required %s static control mode",
+ can_get_ctrlmode_str(ctrlstatic_missing));
return -EOPNOTSUPP;
+ }
/* If a top dependency flag is provided, reset all its dependencies */
if (cm->mask & CAN_CTRLMODE_FD)
@@ -227,8 +264,10 @@ static int can_tdc_changelink(struct data_bittiming_params *dbt_params,
const struct can_tdc_const *tdc_const = dbt_params->tdc_const;
int err;
- if (!tdc_const)
+ if (!tdc_const) {
+ NL_SET_ERR_MSG(extack, "The device does not support TDC");
return -EOPNOTSUPP;
+ }
err = nla_parse_nested(tb_tdc, IFLA_CAN_TDC_MAX, nla,
can_tdc_policy, extack);
@@ -443,8 +482,11 @@ static int can_changelink(struct net_device *dev, struct nlattr *tb[],
const unsigned int num_term = priv->termination_const_cnt;
unsigned int i;
- if (!priv->do_set_termination)
+ if (!priv->do_set_termination) {
+ NL_SET_ERR_MSG(extack,
+ "Termination is not configurable on this device");
return -EOPNOTSUPP;
+ }
/* check whether given value is supported by the interface */
for (i = 0; i < num_term; i++) {
--
2.49.1
next prev parent reply other threads:[~2025-09-03 8:52 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-03 8:49 [PATCH 00/21] can: netlink: preparation before introduction of CAN XL step 2/2 Vincent Mailhol
2025-09-03 8:50 ` [PATCH 01/21] can: dev: move struct data_bittiming_params to linux/can/bittiming.h Vincent Mailhol
2025-09-03 8:50 ` [PATCH 02/21] can: dev: make can_get_relative_tdco() FD agnostic and move it to bittiming.h Vincent Mailhol
2025-09-03 8:50 ` [PATCH 03/21] can: netlink: document which symbols are FD specific Vincent Mailhol
2025-09-03 8:50 ` [PATCH 04/21] can: netlink: refactor can_validate_bittiming() Vincent Mailhol
2025-09-03 8:50 ` [PATCH 05/21] can: netlink: add can_validate_tdc() Vincent Mailhol
2025-09-03 8:50 ` [PATCH 06/21] can: netlink: add can_validate_databittiming() Vincent Mailhol
2025-09-04 18:46 ` kernel test robot
2025-09-05 14:55 ` Vincent Mailhol
2025-09-03 8:50 ` [PATCH 07/21] can: netlink: remove comment in can_validate() Vincent Mailhol
2025-09-04 6:51 ` Oliver Hartkopp
2025-09-04 9:48 ` Vincent Mailhol
2025-09-05 10:55 ` Oliver Hartkopp
2025-09-05 15:12 ` Vincent Mailhol
2025-09-03 8:50 ` [PATCH 08/21] can: netlink: refactor CAN_CTRLMODE_TDC_{AUTO,MANUAL} flag reset logic Vincent Mailhol
2025-09-03 8:50 ` [PATCH 09/21] can: netlink: remove useless check in can_tdc_changelink() Vincent Mailhol
2025-09-03 8:50 ` [PATCH 10/21] can: netlink: make can_tdc_changelink() FD agnostic Vincent Mailhol
2025-09-03 8:50 ` [PATCH 11/21] can: netlink: add can_dtb_changelink() Vincent Mailhol
2025-09-04 20:29 ` kernel test robot
2025-09-03 8:50 ` [PATCH 12/21] can: netlink: add can_ctrlmode_changelink() Vincent Mailhol
2025-09-03 8:50 ` [PATCH 13/21] can: netlink: make can_tdc_get_size() FD agnostic Vincent Mailhol
2025-09-03 8:50 ` [PATCH 14/21] can: netlink: add can_data_bittiming_get_size() Vincent Mailhol
2025-09-03 8:50 ` [PATCH 15/21] can: netlink: add can_bittiming_fill_info() Vincent Mailhol
2025-09-03 8:50 ` [PATCH 16/21] can: netlink: add can_bittiming_const_fill_info() Vincent Mailhol
2025-09-03 8:50 ` [PATCH 17/21] can: netlink: add can_bitrate_const_fill_info() Vincent Mailhol
2025-09-03 8:50 ` [PATCH 18/21] can: netlink: make can_tdc_fill_info() FD agnostic Vincent Mailhol
2025-09-04 22:01 ` kernel test robot
2025-09-03 8:50 ` [PATCH 19/21] can: calc_bittiming: make can_calc_tdco() " Vincent Mailhol
2025-09-03 8:50 ` [PATCH 20/21] can: dev: add can_get_ctrlmode_str() Vincent Mailhol
2025-09-03 8:50 ` Vincent Mailhol [this message]
2025-09-03 9:26 ` [PATCH 00/21] can: netlink: preparation before introduction of CAN XL step 2/2 Vincent Mailhol
2025-09-04 6:36 ` Oliver Hartkopp
2025-09-04 9:18 ` Vincent Mailhol
2025-09-05 11:11 ` Oliver Hartkopp
2025-09-05 14:58 ` Vincent Mailhol
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250903-canxl-netlink-prep-v1-21-904bd6037cd9@kernel.org \
--to=mailhol@kernel.org \
--cc=duy.nguyen.rh@renesas.com \
--cc=linux-can@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mbro1689@gmail.com \
--cc=minh.le.aj@renesas.com \
--cc=mkl@pengutronix.de \
--cc=socketcan@hartkopp.net \
--cc=stephane.grosjean@hms-networks.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).