From: Gatien Chevallier <gatien.chevallier@foss.st.com>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: <devicetree@vger.kernel.org>,
<linux-stm32@st-md-mailman.stormreply.com>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>,
Gatien Chevallier <gatien.chevallier@foss.st.com>
Subject: [PATCH 1/4] arm64: dts: st: add eth1 pins for stm32mp2x platforms
Date: Wed, 3 Sep 2025 11:53:02 +0200 [thread overview]
Message-ID: <20250903-mp2_ethernet-v1-1-4105b0ad2344@foss.st.com> (raw)
In-Reply-To: <20250903-mp2_ethernet-v1-0-4105b0ad2344@foss.st.com>
Eth1 ethernet controller is present on every stm32mp2x vendor boards.
Describe the pinctrl of eth1 for each of them.
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
---
arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi | 126 ++++++++++++++++++++++++++
1 file changed, 126 insertions(+)
diff --git a/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi b/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi
index 5ac9e72478dddb82be0ef7432d7e728932b2f4d6..3a2a82de48536ef4fe625b69a61e91f746b0d53f 100644
--- a/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi
@@ -6,6 +6,132 @@
#include <dt-bindings/pinctrl/stm32-pinfunc.h>
&pinctrl {
+ eth1_mdio_pins_a: eth1-mdio-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('F', 0, AF10)>; /* ETH_MDC */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <2>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('F', 2, AF10)>; /* ETH_MDIO */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ };
+
+ eth1_mdio_sleep_pins_a: eth1-mdio-sleep-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('F', 0, ANALOG)>, /* ETH_MDC */
+ <STM32_PINMUX('F', 2, ANALOG)>; /* ETH_MDIO */
+ };
+ };
+
+ eth1_rgmii_pins_a: eth1-rgmii-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('A', 15, AF10)>, /* ETH_RGMII_TXD0 */
+ <STM32_PINMUX('C', 1, AF10)>, /* ETH_RGMII_TXD1 */
+ <STM32_PINMUX('H', 10, AF10)>, /* ETH_RGMII_TXD2 */
+ <STM32_PINMUX('H', 11, AF10)>, /* ETH_RGMII_TXD3 */
+ <STM32_PINMUX('A', 13, AF10)>; /* ETH_RGMII_TX_CTL */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <3>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('H', 9, AF10)>, /* ETH_RGMII_CLK125 */
+ <STM32_PINMUX('C', 0, AF12)>; /* ETH_RGMII_GTX_CLK */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <3>;
+ };
+ pins3 {
+ pinmux = <STM32_PINMUX('F', 1, AF10)>, /* ETH_RGMII_RXD0 */
+ <STM32_PINMUX('C', 2, AF10)>, /* ETH_RGMII_RXD1 */
+ <STM32_PINMUX('H', 12, AF10)>, /* ETH_RGMII_RXD2 */
+ <STM32_PINMUX('H', 13, AF10)>, /* ETH_RGMII_RXD3 */
+ <STM32_PINMUX('A', 11, AF10)>; /* ETH_RGMII_RX_CTL */
+ bias-disable;
+ };
+ pins4 {
+ pinmux = <STM32_PINMUX('A', 14, AF10)>; /* ETH_RGMII_RX_CLK */
+ bias-disable;
+ };
+ };
+
+ eth1_rgmii_sleep_pins_a: eth1-rgmii-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 15, ANALOG)>, /* ETH_RGMII_TXD0 */
+ <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_RGMII_TXD1 */
+ <STM32_PINMUX('H', 10, ANALOG)>, /* ETH_RGMII_TXD2 */
+ <STM32_PINMUX('H', 11, ANALOG)>, /* ETH_RGMII_TXD3 */
+ <STM32_PINMUX('A', 13, ANALOG)>, /* ETH_RGMII_TX_CTL */
+ <STM32_PINMUX('H', 9, ANALOG)>, /* ETH_RGMII_CLK125 */
+ <STM32_PINMUX('C', 0, ANALOG)>, /* ETH_RGMII_GTX_CLK */
+ <STM32_PINMUX('F', 1, ANALOG)>, /* ETH_RGMII_RXD0 */
+ <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_RXD1 */
+ <STM32_PINMUX('H', 12, ANALOG)>, /* ETH_RGMII_RXD2 */
+ <STM32_PINMUX('H', 13, ANALOG)>, /* ETH_RGMII_RXD3 */
+ <STM32_PINMUX('A', 11, ANALOG)>, /* ETH_RGMII_RX_CTL */
+ <STM32_PINMUX('A', 14, ANALOG)>; /* ETH_RGMII_RX_CLK */
+ };
+ };
+
+ eth1_rgmii_pins_b: eth1-rgmii-1 {
+ pins1 {
+ pinmux = <STM32_PINMUX('A', 15, AF10)>, /* ETH_RGMII_TXD0 */
+ <STM32_PINMUX('C', 1, AF10)>, /* ETH_RGMII_TXD1 */
+ <STM32_PINMUX('H', 10, AF10)>, /* ETH_RGMII_TXD2 */
+ <STM32_PINMUX('H', 11, AF10)>, /* ETH_RGMII_TXD3 */
+ <STM32_PINMUX('A', 13, AF10)>; /* ETH_RGMII_TX_CTL */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <3>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('H', 9, AF10)>, /* ETH_RGMII_CLK125 */
+ <STM32_PINMUX('C', 0, AF12)>, /* ETH_RGMII_GTX_CLK */
+ <STM32_PINMUX('A', 9, AF10)>, /* ETH_MDC */
+ <STM32_PINMUX('A', 10, AF10)>; /* ETH_MDIO */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <3>;
+ };
+ pins3 {
+ pinmux = <STM32_PINMUX('F', 1, AF10)>, /* ETH_RGMII_RXD0 */
+ <STM32_PINMUX('C', 2, AF10)>, /* ETH_RGMII_RXD1 */
+ <STM32_PINMUX('H', 12, AF10)>, /* ETH_RGMII_RXD2 */
+ <STM32_PINMUX('H', 13, AF10)>, /* ETH_RGMII_RXD3 */
+ <STM32_PINMUX('A', 11, AF10)>; /* ETH_RGMII_RX_CTL */
+ bias-disable;
+ };
+ pins4 {
+ pinmux = <STM32_PINMUX('A', 14, AF10)>; /* ETH_RGMII_RX_CLK */
+ bias-disable;
+ };
+ };
+
+ eth1_rgmii_sleep_pins_b: eth1-rgmii-sleep-1 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 15, ANALOG)>, /* ETH_RGMII_TXD0 */
+ <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_RGMII_TXD1 */
+ <STM32_PINMUX('H', 10, ANALOG)>, /* ETH_RGMII_TXD2 */
+ <STM32_PINMUX('H', 11, ANALOG)>, /* ETH_RGMII_TXD3 */
+ <STM32_PINMUX('A', 13, ANALOG)>, /* ETH_RGMII_TX_CTL */
+ <STM32_PINMUX('H', 9, ANALOG)>, /* ETH_RGMII_CLK125 */
+ <STM32_PINMUX('C', 0, ANALOG)>, /* ETH_RGMII_GTX_CLK */
+ <STM32_PINMUX('A', 9, ANALOG)>, /* ETH_MDC */
+ <STM32_PINMUX('A', 10, ANALOG)>, /* ETH_MDIO */
+ <STM32_PINMUX('F', 1, ANALOG)>, /* ETH_RGMII_RXD0 */
+ <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_RXD1 */
+ <STM32_PINMUX('H', 12, ANALOG)>, /* ETH_RGMII_RXD2 */
+ <STM32_PINMUX('H', 13, ANALOG)>, /* ETH_RGMII_RXD3 */
+ <STM32_PINMUX('A', 11, ANALOG)>, /* ETH_RGMII_RX_CTL */
+ <STM32_PINMUX('A', 14, AF10)>; /* ETH_RGMII_RX_CLK */
+ };
+ };
+
eth2_rgmii_pins_a: eth2-rgmii-0 {
pins1 {
pinmux = <STM32_PINMUX('C', 7, AF10)>, /* ETH_RGMII_TXD0 */
--
2.25.1
next prev parent reply other threads:[~2025-09-03 9:54 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-03 9:53 [PATCH 0/4] arm64: dts: st: add ethernet1 controller support on stm32mp23/25 boards Gatien Chevallier
2025-09-03 9:53 ` Gatien Chevallier [this message]
2025-09-03 9:53 ` [PATCH 2/4] arm64: dts: st: enable ethernet1 controller on stm32mp257f-dk Gatien Chevallier
2025-09-03 12:21 ` Andrew Lunn
2025-09-03 13:35 ` Gatien CHEVALLIER
2025-09-03 9:53 ` [PATCH 3/4] arm64: dts: st: enable ethernet1 controller on stm32mp257f-ev1 Gatien Chevallier
2025-09-03 12:24 ` Andrew Lunn
2025-09-03 12:46 ` Gatien CHEVALLIER
2025-09-03 9:53 ` [PATCH 4/4] arm64: dts: st: enable ethernet1 controller on stm32mp235f-dk Gatien Chevallier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250903-mp2_ethernet-v1-1-4105b0ad2344@foss.st.com \
--to=gatien.chevallier@foss.st.com \
--cc=alexandre.torgue@foss.st.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).