[PATCH v5 3/3] pinctrl: qcom: Add SDM660 LPASS LPI TLMM

[Nickolay Goppen <setotau@mainlining.org>]

From: Richard Acayan <mailingradian@gmail.com>

The Snapdragon 660 has a Low-Power Island (LPI) TLMM for configuring
pins related to audio. Add the driver for this.
Also, this driver uses predefined pin_offsets for each pin taken from
downstream driver, which does not follow the usual 0x1000 distance
between pins and uses an array with predefined offsets that do not
follow any regular pattern [1].

[1] https://git.codelinaro.org/clo/la/kernel/msm-4.4/-/blob/LA.UM.7.2.c27-07400-sdm660.0/drivers/pinctrl/qcom/pinctrl-lpi.c#L107

Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Co-developed-by: Nickolay Goppen <setotau@mainlining.org>
Signed-off-by: Nickolay Goppen <setotau@mainlining.org>
---
 drivers/pinctrl/qcom/Kconfig                    |  10 ++
 drivers/pinctrl/qcom/Makefile                   |   1 +
 drivers/pinctrl/qcom/pinctrl-sdm660-lpass-lpi.c | 161 ++++++++++++++++++++++++
 3 files changed, 172 insertions(+)

diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
index dd9bbe8f3e11c37418d2143b33c21eeea10d456b..ef42520115f461302098d878cb76c6f25e55b5e4 100644
--- a/drivers/pinctrl/qcom/Kconfig
+++ b/drivers/pinctrl/qcom/Kconfig
@@ -68,6 +68,16 @@ config PINCTRL_SC7280_LPASS_LPI
 	  Qualcomm Technologies Inc LPASS (Low Power Audio SubSystem) LPI
 	  (Low Power Island) found on the Qualcomm Technologies Inc SC7280 platform.
 
+config PINCTRL_SDM660_LPASS_LPI
+	tristate "Qualcomm Technologies Inc SDM660 LPASS LPI pin controller driver"
+	depends on GPIOLIB
+	depends on ARM64 || COMPILE_TEST
+	depends on PINCTRL_LPASS_LPI
+	help
+	  This is the pinctrl, pinmux, pinconf and gpiolib driver for the
+	  Qualcomm Technologies Inc LPASS (Low Power Audio SubSystem) LPI
+	  (Low Power Island) found on the Qualcomm Technologies Inc SDM660 platform.
+
 config PINCTRL_SM4250_LPASS_LPI
 	tristate "Qualcomm Technologies Inc SM4250 LPASS LPI pin controller driver"
 	depends on ARM64 || COMPILE_TEST
diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile
index 2acff520a285a47a4a179f815402adaa5ce5addd..a81c1e127897a50fb2136c5eb38a076ebe5709a6 100644
--- a/drivers/pinctrl/qcom/Makefile
+++ b/drivers/pinctrl/qcom/Makefile
@@ -44,6 +44,7 @@ obj-$(CONFIG_PINCTRL_SC7280_LPASS_LPI) += pinctrl-sc7280-lpass-lpi.o
 obj-$(CONFIG_PINCTRL_SC8180X)	+= pinctrl-sc8180x.o
 obj-$(CONFIG_PINCTRL_SC8280XP)	+= pinctrl-sc8280xp.o
 obj-$(CONFIG_PINCTRL_SDM660)   += pinctrl-sdm660.o
+obj-$(CONFIG_PINCTRL_SDM660_LPASS_LPI) += pinctrl-sdm660-lpass-lpi.o
 obj-$(CONFIG_PINCTRL_SDM670) += pinctrl-sdm670.o
 obj-$(CONFIG_PINCTRL_SDM845) += pinctrl-sdm845.o
 obj-$(CONFIG_PINCTRL_SDX55) += pinctrl-sdx55.o
diff --git a/drivers/pinctrl/qcom/pinctrl-sdm660-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-sdm660-lpass-lpi.c
new file mode 100644
index 0000000000000000000000000000000000000000..a8dae43f19c3cf5025bf17860685d05407305c11
--- /dev/null
+++ b/drivers/pinctrl/qcom/pinctrl-sdm660-lpass-lpi.c
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * This driver is solely based on the limited information in downstream code.
+ * Any verification with schematics would be greatly appreciated.
+ *
+ * Copyright (c) 2023, Richard Acayan. All rights reserved.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#include "pinctrl-lpass-lpi.h"
+
+enum lpass_lpi_functions {
+	LPI_MUX_comp_rx,
+	LPI_MUX_dmic1_clk,
+	LPI_MUX_dmic1_data,
+	LPI_MUX_dmic2_clk,
+	LPI_MUX_dmic2_data,
+	LPI_MUX_mclk0,
+	LPI_MUX_pdm_tx,
+	LPI_MUX_pdm_clk,
+	LPI_MUX_pdm_rx,
+	LPI_MUX_pdm_sync,
+
+	LPI_MUX_gpio,
+	LPI_MUX__,
+};
+
+static const struct pinctrl_pin_desc sdm660_lpi_pinctrl_pins[] = {
+	PINCTRL_PIN(0, "gpio0"),
+	PINCTRL_PIN(1, "gpio1"),
+	PINCTRL_PIN(2, "gpio2"),
+	PINCTRL_PIN(3, "gpio3"),
+	PINCTRL_PIN(4, "gpio4"),
+	PINCTRL_PIN(5, "gpio5"),
+	PINCTRL_PIN(6, "gpio6"),
+	PINCTRL_PIN(7, "gpio7"),
+	PINCTRL_PIN(8, "gpio8"),
+	PINCTRL_PIN(9, "gpio9"),
+	PINCTRL_PIN(10, "gpio10"),
+	PINCTRL_PIN(11, "gpio11"),
+	PINCTRL_PIN(12, "gpio12"),
+	PINCTRL_PIN(13, "gpio13"),
+	PINCTRL_PIN(14, "gpio14"),
+	PINCTRL_PIN(15, "gpio15"),
+	PINCTRL_PIN(16, "gpio16"),
+	PINCTRL_PIN(17, "gpio17"),
+	PINCTRL_PIN(18, "gpio18"),
+	PINCTRL_PIN(19, "gpio19"),
+	PINCTRL_PIN(20, "gpio20"),
+	PINCTRL_PIN(21, "gpio21"),
+	PINCTRL_PIN(22, "gpio22"),
+	PINCTRL_PIN(23, "gpio23"),
+	PINCTRL_PIN(24, "gpio24"),
+	PINCTRL_PIN(25, "gpio25"),
+	PINCTRL_PIN(26, "gpio26"),
+	PINCTRL_PIN(27, "gpio27"),
+	PINCTRL_PIN(28, "gpio28"),
+	PINCTRL_PIN(29, "gpio29"),
+	PINCTRL_PIN(30, "gpio30"),
+	PINCTRL_PIN(31, "gpio31"),
+};
+
+static const char * const comp_rx_groups[] = { "gpio22", "gpio24" };
+static const char * const dmic1_clk_groups[] = { "gpio26" };
+static const char * const dmic1_data_groups[] = { "gpio27" };
+static const char * const dmic2_clk_groups[] = { "gpio28" };
+static const char * const dmic2_data_groups[] = { "gpio29" };
+static const char * const mclk0_groups[] = { "gpio18" };
+static const char * const pdm_tx_groups[] = { "gpio20" };
+static const char * const pdm_clk_groups[] = { "gpio18" };
+static const char * const pdm_rx_groups[] = { "gpio21", "gpio23", "gpio25" };
+static const char * const pdm_sync_groups[] = { "gpio19" };
+
+const struct lpi_pingroup sdm660_lpi_pinctrl_groups[] = {
+	LPI_PINGROUP_OFFSET(0, LPI_NO_SLEW, _, _, _, _, 0x0000),
+	LPI_PINGROUP_OFFSET(1, LPI_NO_SLEW, _, _, _, _, 0x1000),
+	LPI_PINGROUP_OFFSET(2, LPI_NO_SLEW, _, _, _, _, 0x2000),
+	LPI_PINGROUP_OFFSET(3, LPI_NO_SLEW, _, _, _, _, 0x2010),
+	LPI_PINGROUP_OFFSET(4, LPI_NO_SLEW, _, _, _, _, 0x3000),
+	LPI_PINGROUP_OFFSET(5, LPI_NO_SLEW, _, _, _, _, 0x3010),
+	LPI_PINGROUP_OFFSET(6, LPI_NO_SLEW, _, _, _, _, 0x4000),
+	LPI_PINGROUP_OFFSET(7, LPI_NO_SLEW, _, _, _, _, 0x4010),
+	LPI_PINGROUP_OFFSET(8, LPI_NO_SLEW, _, _, _, _, 0x5000),
+	LPI_PINGROUP_OFFSET(9, LPI_NO_SLEW, _, _, _, _, 0x5010),
+	LPI_PINGROUP_OFFSET(10, LPI_NO_SLEW, _, _, _, _, 0x5020),
+	LPI_PINGROUP_OFFSET(11, LPI_NO_SLEW, _, _, _, _, 0x5030),
+	LPI_PINGROUP_OFFSET(12, LPI_NO_SLEW, _, _, _, _, 0x6000),
+	LPI_PINGROUP_OFFSET(13, LPI_NO_SLEW, _, _, _, _, 0x6010),
+	LPI_PINGROUP_OFFSET(14, LPI_NO_SLEW, _, _, _, _, 0x7000),
+	LPI_PINGROUP_OFFSET(15, LPI_NO_SLEW, _, _, _, _, 0x7010),
+	LPI_PINGROUP_OFFSET(16, LPI_NO_SLEW, _, _, _, _, 0x5040),
+	LPI_PINGROUP_OFFSET(17, LPI_NO_SLEW, _, _, _, _, 0x5050),
+
+	/* The function names of the PDM GPIOs are derived from SDM670 */
+	LPI_PINGROUP_OFFSET(18, LPI_NO_SLEW, pdm_clk, mclk0, _, _, 0x8000),
+	LPI_PINGROUP_OFFSET(19, LPI_NO_SLEW, pdm_sync, _, _, _, 0x8010),
+	LPI_PINGROUP_OFFSET(20, LPI_NO_SLEW, pdm_tx, _, _, _, 0x8020),
+	LPI_PINGROUP_OFFSET(21, LPI_NO_SLEW, pdm_rx, _, _, _, 0x8030),
+	LPI_PINGROUP_OFFSET(22, LPI_NO_SLEW, comp_rx, _, _, _, 0x8040),
+	LPI_PINGROUP_OFFSET(23, LPI_NO_SLEW, pdm_rx, _, _, _, 0x8050),
+	LPI_PINGROUP_OFFSET(24, LPI_NO_SLEW, comp_rx, _, _, _, 0x8060),
+	LPI_PINGROUP_OFFSET(25, LPI_NO_SLEW, pdm_rx, _, _, _, 0x8070),
+	LPI_PINGROUP_OFFSET(26, LPI_NO_SLEW, dmic1_clk, _, _, _, 0x9000),
+	LPI_PINGROUP_OFFSET(27, LPI_NO_SLEW, dmic1_data, _, _, _, 0x9010),
+	LPI_PINGROUP_OFFSET(28, LPI_NO_SLEW, dmic2_clk, _, _, _, 0xa000),
+	LPI_PINGROUP_OFFSET(29, LPI_NO_SLEW, dmic2_data, _, _, _, 0xa010),
+
+	LPI_PINGROUP_OFFSET(30, LPI_NO_SLEW, _, _, _, _, 0xb000),
+	LPI_PINGROUP_OFFSET(31, LPI_NO_SLEW, _, _, _, _, 0xb010),
+};
+
+const struct lpi_function sdm660_lpi_pinctrl_functions[] = {
+	LPI_FUNCTION(comp_rx),
+	LPI_FUNCTION(dmic1_clk),
+	LPI_FUNCTION(dmic1_data),
+	LPI_FUNCTION(dmic2_clk),
+	LPI_FUNCTION(dmic2_data),
+	LPI_FUNCTION(mclk0),
+	LPI_FUNCTION(pdm_tx),
+	LPI_FUNCTION(pdm_clk),
+	LPI_FUNCTION(pdm_rx),
+	LPI_FUNCTION(pdm_sync),
+};
+
+static const struct lpi_pinctrl_variant_data sdm660_lpi_pinctrl_data = {
+	.pins = sdm660_lpi_pinctrl_pins,
+	.npins = ARRAY_SIZE(sdm660_lpi_pinctrl_pins),
+	.groups = sdm660_lpi_pinctrl_groups,
+	.ngroups = ARRAY_SIZE(sdm660_lpi_pinctrl_groups),
+	.functions = sdm660_lpi_pinctrl_functions,
+	.nfunctions = ARRAY_SIZE(sdm660_lpi_pinctrl_functions),
+	.flags = LPI_FLAG_SLEW_RATE_SAME_REG | LPI_FLAG_USE_PREDEFINED_PIN_OFFSET
+};
+
+static const struct of_device_id sdm660_lpi_pinctrl_of_match[] = {
+	{
+		.compatible = "qcom,sdm660-lpass-lpi-pinctrl",
+		.data = &sdm660_lpi_pinctrl_data,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sdm660_lpi_pinctrl_of_match);
+
+static struct platform_driver sdm660_lpi_pinctrl_driver = {
+	.driver = {
+		.name = "qcom-sdm660-lpass-lpi-pinctrl",
+		.of_match_table = sdm660_lpi_pinctrl_of_match,
+	},
+	.probe = lpi_pinctrl_probe,
+	.remove = lpi_pinctrl_remove,
+};
+module_platform_driver(sdm660_lpi_pinctrl_driver);
+
+MODULE_AUTHOR("Richard Acayan <mailingradian@gmail.com>");
+MODULE_DESCRIPTION("QTI SDM660 LPI GPIO pin control driver");
+MODULE_LICENSE("GPL");

-- 
2.51.0