From: Jonas Gorski <jonas.gorski@gmail.com>
To: Florian Fainelli <florian.fainelli@broadcom.com>,
Andrew Lunn <andrew@lunn.ch>, Vladimir Oltean <olteanv@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Jonas Gorski <jonas.gorski@gmail.com>
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH net v2] net: dsa: b53: fix ageing time for BCM53101
Date: Fri, 5 Sep 2025 14:45:07 +0200 [thread overview]
Message-ID: <20250905124507.59186-1-jonas.gorski@gmail.com> (raw)
For some reason Broadcom decided that BCM53101 uses 0.5s increments for
the ageing time register, but kept the field width the same [1]. Due to
this, the actual ageing time was always half of what was configured.
Fix this by adapting the limits and value calculation for BCM53101.
So far it looks like this is the only chip with the increased tick
speed:
$ grep -l -r "Specifies the aging time in 0.5 seconds" cdk/PKG/chip | sort
cdk/PKG/chip/bcm53101/bcm53101_a0_defs.h
$ grep -l -r "Specifies the aging time in seconds" cdk/PKG/chip | sort
cdk/PKG/chip/bcm53010/bcm53010_a0_defs.h
cdk/PKG/chip/bcm53020/bcm53020_a0_defs.h
cdk/PKG/chip/bcm53084/bcm53084_a0_defs.h
cdk/PKG/chip/bcm53115/bcm53115_a0_defs.h
cdk/PKG/chip/bcm53118/bcm53118_a0_defs.h
cdk/PKG/chip/bcm53125/bcm53125_a0_defs.h
cdk/PKG/chip/bcm53128/bcm53128_a0_defs.h
cdk/PKG/chip/bcm53134/bcm53134_a0_defs.h
cdk/PKG/chip/bcm53242/bcm53242_a0_defs.h
cdk/PKG/chip/bcm53262/bcm53262_a0_defs.h
cdk/PKG/chip/bcm53280/bcm53280_a0_defs.h
cdk/PKG/chip/bcm53280/bcm53280_b0_defs.h
cdk/PKG/chip/bcm53600/bcm53600_a0_defs.h
cdk/PKG/chip/bcm89500/bcm89500_a0_defs.h
[1] https://github.com/Broadcom/OpenMDK/blob/a5d3fc9b12af3eeb68f2ca0ce7ec4056cd14d6c2/cdk/PKG/chip/bcm53101/bcm53101_a0_defs.h#L28966
Fixes: e39d14a760c0 ("net: dsa: b53: implement setting ageing time")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
---
v1 -> v2:
* Updated github URL to point to fixed commit
* added grep output for tick speed to commit message
* dropped extra empty line added at the start in b53_setup()
drivers/net/dsa/b53/b53_common.c | 17 +++++++++++++----
1 file changed, 13 insertions(+), 4 deletions(-)
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 829b1f087e9e..2f846381d5a7 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -1273,9 +1273,15 @@ static int b53_setup(struct dsa_switch *ds)
*/
ds->untag_vlan_aware_bridge_pvid = true;
- /* Ageing time is set in seconds */
- ds->ageing_time_min = 1 * 1000;
- ds->ageing_time_max = AGE_TIME_MAX * 1000;
+ if (dev->chip_id == BCM53101_DEVICE_ID) {
+ /* BCM53101 uses 0.5 second increments */
+ ds->ageing_time_min = 1 * 500;
+ ds->ageing_time_max = AGE_TIME_MAX * 500;
+ } else {
+ /* Everything else uses 1 second increments */
+ ds->ageing_time_min = 1 * 1000;
+ ds->ageing_time_max = AGE_TIME_MAX * 1000;
+ }
ret = b53_reset_switch(dev);
if (ret) {
@@ -2559,7 +2565,10 @@ int b53_set_ageing_time(struct dsa_switch *ds, unsigned int msecs)
else
reg = B53_AGING_TIME_CONTROL;
- atc = DIV_ROUND_CLOSEST(msecs, 1000);
+ if (dev->chip_id == BCM53101_DEVICE_ID)
+ atc = DIV_ROUND_CLOSEST(msecs, 500);
+ else
+ atc = DIV_ROUND_CLOSEST(msecs, 1000);
if (!is5325(dev) && !is5365(dev))
atc |= AGE_CHANGE;
base-commit: 157cf360c4a8751f7f511a71cc3a283b5d27f889
--
2.43.0
next reply other threads:[~2025-09-05 12:45 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-05 12:45 Jonas Gorski [this message]
2025-09-05 16:29 ` [PATCH net v2] net: dsa: b53: fix ageing time for BCM53101 Florian Fainelli
2025-09-09 1:20 ` patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250905124507.59186-1-jonas.gorski@gmail.com \
--to=jonas.gorski@gmail.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=florian.fainelli@broadcom.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox