[PATCH v2 2/3] i2c: PCF8584: Fix do not use assignment in 'if' conditional

[Cezar Chiru <chiru.cezar.89@gmail.com>]

Fixed errors usage of assignment inside of 'if' conditional
statements. Revealed by checkpatch.pl.
Fixed by moving assignment from inside 'if' to 1 line before each
if conditional statement that caused errors.

Signed-off-by: Cezar Chiru <chiru.cezar.89@gmail.com>
---
 drivers/i2c/algos/i2c-algo-pcf.c | 21 ++++++++++++++-------
 1 file changed, 14 insertions(+), 7 deletions(-)

diff --git a/drivers/i2c/algos/i2c-algo-pcf.c b/drivers/i2c/algos/i2c-algo-pcf.c
index 3fc4b5080a32..598bf000bf4a 100644
--- a/drivers/i2c/algos/i2c-algo-pcf.c
+++ b/drivers/i2c/algos/i2c-algo-pcf.c
@@ -169,7 +169,8 @@ static int pcf_init_8584 (struct i2c_algo_pcf_data *adap)
 	 * check to see S1 now used as R/W ctrl -
 	 * PCF8584 does that when ESO is zero
 	 */
-	if (((temp = get_pcf(adap, 1)) & 0x7f) != (0)) {
+	temp = get_pcf(adap, 1);
+	if ((temp & 0x7f) != (0)) {
 		DEB2(printk(KERN_ERR "i2c-algo-pcf.o: PCF detection failed -- can't select S0 (0x%02x).\n", temp));
 		return -ENXIO; /* definitely not PCF8584 */
 	}
@@ -177,7 +178,8 @@ static int pcf_init_8584 (struct i2c_algo_pcf_data *adap)
 	/* load own address in S0, effective address is (own << 1) */
 	i2c_outb(adap, get_own(adap));
 	/* check it's really written */
-	if ((temp = i2c_inb(adap)) != get_own(adap)) {
+	temp = i2c_inb(adap);
+	if (temp != get_own(adap)) {
 		DEB2(printk(KERN_ERR "i2c-algo-pcf.o: PCF detection failed -- can't set S0 (0x%02x).\n", temp));
 		return -ENXIO;
 	}
@@ -185,7 +187,8 @@ static int pcf_init_8584 (struct i2c_algo_pcf_data *adap)
 	/* S1=0xA0, next byte in S2 */
 	set_pcf(adap, 1, I2C_PCF_PIN | I2C_PCF_ES1);
 	/* check to see S2 now selected */
-	if (((temp = get_pcf(adap, 1)) & 0x7f) != I2C_PCF_ES1) {
+	temp = get_pcf(adap, 1);
+	if ((temp & 0x7f) != I2C_PCF_ES1) {
 		DEB2(printk(KERN_ERR "i2c-algo-pcf.o: PCF detection failed -- can't select S2 (0x%02x).\n", temp));
 		return -ENXIO;
 	}
@@ -193,7 +196,8 @@ static int pcf_init_8584 (struct i2c_algo_pcf_data *adap)
 	/* load clock register S2 */
 	i2c_outb(adap, get_clock(adap));
 	/* check it's really written, the only 5 lowest bits does matter */
-	if (((temp = i2c_inb(adap)) & 0x1f) != get_clock(adap)) {
+	temp = i2c_inb(adap);
+	if ((temp & 0x1f) != get_clock(adap)) {
 		DEB2(printk(KERN_ERR "i2c-algo-pcf.o: PCF detection failed -- can't set S2 (0x%02x).\n", temp));
 		return -ENXIO;
 	}
@@ -202,7 +206,8 @@ static int pcf_init_8584 (struct i2c_algo_pcf_data *adap)
 	set_pcf(adap, 1, I2C_PCF_IDLE);
 
 	/* check to see PCF is really idled and we can access status register */
-	if ((temp = get_pcf(adap, 1)) != (I2C_PCF_PIN | I2C_PCF_BB)) {
+	temp = get_pcf(adap, 1);
+	if (temp != (I2C_PCF_PIN | I2C_PCF_BB)) {
 		DEB2(printk(KERN_ERR "i2c-algo-pcf.o: PCF detection failed -- can't select S1` (0x%02x).\n", temp));
 		return -ENXIO;
 	}
@@ -255,7 +260,8 @@ static int pcf_readbytes(struct i2c_adapter *i2c_adap, char *buf,
 	/* increment number of bytes to read by one -- read dummy byte */
 	for (i = 0; i <= count; i++) {
 
-		if ((wfp = wait_for_pin(adap, &status))) {
+		wfp = wait_for_pin(adap, &status);
+		if (wfp) {
 			if (wfp == -EINTR)
 				return -EINTR; /* arbitration lost */
 
@@ -415,7 +421,8 @@ int i2c_pcf_add_bus(struct i2c_adapter *adap)
 	/* register new adapter to i2c module... */
 	adap->algo = &pcf_algo;
 
-	if ((rval = pcf_init_8584(pcf_adap)))
+	rval = pcf_init_8584(pcf_adap);
+	if (rval)
 		return rval;
 
 	rval = i2c_add_adapter(adap);
-- 
2.43.0